Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Juvenile-mature Wood Evaluation Along the Bole Considering the Influence of Silvicultural Treatments

  • Ruano, Antonio
  • Hermoso Prieto, Eva
Centro de Investigación Forestal (CIFOR), Wood used for structural purposes has increased in the last decade in Spain. However, as raw material, wood needs to comply with requirements that are not always present. Knowledge about the wood quality from the trees on the stand is essential for providing feedback to forest managers and for taking the required actions to obtain suitable silviculture treatments. Two of the main wood species used in construction in Spain, Pinus nigra and Pinus sylvestris, have been studied in order to determine the amount of juvenile wood, which has been identified as a harmful characteristic for its decrease in quality of the physical-mechanical properties of these species. Being relevant for the best quality of timber in the part along the bole where the logs are obtained, the distribution of juvenile wood at different heights and the effect of several silvicultural treatments have had on juvenile wood formation has been considered. The juvenile-mature wood boundary (transition year) was calculated through segmented linear mixed models employing as variables annual latewood density, obtained through micro X-ray densitometry, silvicultural practices, and a drought index. The results show how juvenile and mature wood is distributed along the bole and the proportion of juvenile wood. Its reduction according to the different thinning and pruning silvicultural practices is presented., This study has been carried out with the support of the Ministry of Economy and Competitivity of the Government of Spain through the Project RTA2014-00005-00-00. The authors would like to thank Enrique Garriga and Ramon García who helped us on the fieldwork, to Juan Carlos Cabrero who came up with creative ways on how to proceed, to Eduardo Trobajo who did the μXRD and to the carpenter Emilio Camacho who made the processing of the samples possible, Peer reviewed, 10 Pág.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shrinkage pattern assessment for black pine juvenile wood delimitation

  • Ruano, Antonio
  • García De Ceca, José Luis
  • Cabrero, Juan Carlos
  • Hermoso Prieto, Eva
8 Pág., Juvenile wood is associated with shrinkage and a high probability of warping and checks in end products, reducing their value and even causing them to be rejected for structural purposes. This work studies the variations in yearly shrinkage caused when wood passes from green to dry state. The methodology proposed is based on the juvenile wood (JW) location using annual shrinkage variations. Pinus nigra Arn. grown using different silviculture techniques was chosen for study because its wood is characterized by severe shrinkage problems. This characteristic is analyzed in the radial and angular directions, of which the latter is a different methodology for evaluating warping problem rather than the commonly used ratio of anisotropy. It takes into account the annual measurements obtained from a disc cut from the tree trunk at various heights. The results were compared with the segregated JW and mature wood (MW) area obtained by radial densitometry pattern variation methodology. The results show that radial shrinkage is higher near the pith but stabilizes earlier (3–7 rings) than angular shrinkage (9–11 rings). Nevertheless, the opposite initial radial pattern occurs in angular shrinkage, which is low near the pith but increases annually towards the bark until it stabilizes. No clear effect of height in the tree when comparing the radial shrinkage patterns obtained along the bole can be defined. Silviculture practices have no significant influence on shrinkage percentage. Shrinkage and densitometry methodologies show differences in the quantification of JW volume percentage between JW and MW estimation. Results show that radial shrinkage pattern methodology, which is associated with warping problems, classifies a higher tree volume as good quality for end uses in comparison to the use of radial densitometry pattern methodology. On the other hand, if classified by radial densitometry pattern variation, warping problems associated with JW should not be a problem when sawn., This study was supported by the Spanish Ministry of Economy and Competitiveness through Project RTA2014-00005-00-00. The authors would like to thank Enrique Garriga and Ramon García who helped in the feld work, Emilio Camacho who processed the samples and Eduardo Rodriguez Trobajo for the micro X-ray densitometry and suggested improvements to the paper., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Height growth for assessing core–outerwood transition on Pinus sylvestris and Pinus nigra Spanish stands

  • Ruano, Antonio
  • Ruiz-Peinado, Ricardo
  • Fernández-Golfín, Juan I.
  • Hermoso Prieto, Eva
6 Pág., One of the characteristics of great relevance in the wood quality in Spanish coniferous forests due to growth conditions is the presence of corewood. This wood area presents properties and characteristics inferior to those in outerwood, which are more appropriate for certain uses. In plantations with short rotations, the percentage of juvenile timber is higher, and the profitability of the wood can be affected due to its unsuitability for high added value applications, such as structural. This work focuses on determining whether the use of models of current annual increase in height can provide suitable estimations of the year or transition zone between corewood and outerwood. This knowledge will contribute to analyze the expected yield of quality wood. The material studied is from Pinus sylvestris L. (Scots pine) and Pinus nigra Arnold subsp. nigra (black pine) pure stands. Densitometry results showed that the corewood–outerwood transition year could not be predicted by tree height functions., This study has been carried out with the support of the Ministry of Economy and Competitivity of the Government of Spain through the Project RTA2014-00005-00-00, and the Training Program for Research Staff (FPI-INIA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NIR hyperspectral imaging (NIR-HI) and μxRD for determination of the transition between juvenile and mature wood of Pinus sylvestris L

  • Ruano, Antonio
  • Zitek, Andreas
  • Hinterstoisser, Barbara
  • Hermoso Prieto, Eva
7 Pág., The ratio of juvenile wood (jW) to mature wood (mW) is relevant for structural wood applications because of their different properties. Near infrared-hyperspectral imaging (NIR-HI) indicates after calibration, the spatial distribution of jW and mW, and this approach is less time consuming than the established micro X-ray densitometry (μXRD). In the present study, a comparative detection of the jW and mW of Pinus sylvestris L. was performed by NIR-HI and μXRD and the NIR-HI results were evaluated in combination with three chemometric approaches, namely, the principal component analysis (PCA), partitional k-means unsupervised classification (p-k-mUC) and partial least squares discriminant analysis (PLS-DA) in the range of 900-1700 nm. The best NIR-HI results can be obtained when the transition point of earlywood (EW) and latewood (LW) are assessed separately by PLS-DA. The presented results are useful for an automating data evaluation and simplified data collection., This study has been carried out with the support of the Ministry of Economy and Competitivity of the Government of Spain through the Project RTA2014-00005-00-00, and the Training Program for Research Staff (FPI-INIA)., Peer reviewed