Pasar al contenido principal

MANIPULACION MOVIL PARA ENTORNOS EXTERIORES NO ESTRUCTURADOS

RTI2018-094279-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tactile-Driven Grasp Stability and Slip Prediction

  • Zapata-Impata, Brayan S.
  • Gil, Pablo
  • Torres, Fernando
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
One of the challenges in robotic grasping tasks is the problem of detecting whether a grip is stable or not. The lack of stability during a manipulation operation usually causes the slippage of the grasped object due to poor contact forces. Frequently, an unstable grip can be caused by an inadequate pose of the robotic hand or by insufficient contact pressure, or both. The use of tactile data is essential to check such conditions and, therefore, predict the stability of a grasp. In this work, we present and compare different methodologies based on deep learning in order to represent and process tactile data for both stability and slip prediction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Detección de áreas transitables en entornos no estructurados mediante un LIDAR 2D, Detection of Trafficable Areas in Unstructured Environments Using a 2D LIDAR

  • Olivas, Alejandro
  • Torres, Fernando
  • Olivas, Alejandro|||/items/7077df23-8e63-4f0e-beed-27079ef54ba1
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
La deteccion y evitación de obstáculos es un componente importante de la robótica móvil. En este artículo, empleamos unicamente un sensor LIDAR 2D para segmentar el entornos en líneas, clasificandolas en suelo, obstaculos o baches. Para ello, el sensor fue colocado inclinado hacia el suelo para poder detectar obstaculos y baches de diferentes alturas. La geometrıa de los puntos detectados es analizada para segmentarlos en lıneas, generando un mapa 3D con estas. Se generan distintas trayectorias del veh ́ıculo y, dependiendo de la altura deducida a partir del mapa, las areas se consideran o no transitable. El m ́ etodo detecta correctamente áreas transitables en terrenos con pendientes mientras el robot se mueve. El objetivo se ha conseguido utilizando un sensor economico en oposicion de otros metodos que utilizan sistemas mas costosos.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Generation of Tactile Data from 3D Vision and Target Robotic Grasps

  • Zapata-Impata, Brayan S.
  • Gil, Pablo
  • Mezouar, Youcef
  • Torres, Fernando
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Tactile perception is a rich source of information for robotic grasping: it allows a robot to identify a grasped object and assess the stability of a grasp, among other things. However, the tactile sensor must come into contact with the target object in order to produce readings. As a result, tactile data can only be attained if a real contact is made. We propose to overcome this restriction by employing a method that models the behaviour of a tactile sensor using 3D vision and grasp information as a stimulus. Our system regresses the quantified tactile response that would be experienced if this grasp were performed on the object. We experiment with 16 items and 4 tactile data modalities to show that our proposal learns this task with low error.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Desarrollos en BLUE para Manipulación Móvil en Entornos Exteriores No Estructurado, Developments in BLUE for Mobile Handling in Unstructured Outdoor Environments

  • Castaño Amorós, Julio
  • Páez Ubieta, Ignacio de Loyola
  • Muñoz-Bañón, Miguel Á.
  • Velasco, Edison P.
  • Candelas-Herías, Francisco A.
  • Puente Méndez, Santiago T.
  • Gil, Pablo
  • Torres, Fernando
  • Candelas-Herías, Francisco A.|||/items/d4ce6549-c436-439d-ab35-c08c9c4398c2
  • Castaño Amorós, Julio|||/items/773d394b-045e-42fe-8326-a8cbd3d8d5b7
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Muñoz-Bañón, Miguel Á.|||/items/aaa2466d-a60d-4d03-9607-36d34ecacc9a
  • Páez Ubieta, Ignacio de Loyola|||/items/f0f7ccea-9e51-49c7-80ca-6367f1003936
  • Puente Méndez, Santiago T.|||/items/b02d19c1-e93f-45cd-9367-7c228d585248
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
  • Velasco, Edison P.|||/items/66a95307-8df4-43a8-ac52-24c774c581ab
La investigación robótica requiere plataformas experimentales que tengan una arquitectura abierta. Existen varios equipos comerciales con estas características, pero tienen un gran coste económico, siendo esto un inconveniente en el desarrollo de algoritmos. En este artículo presentamos los avances implementados en nuestro vehículo terrestre no tripulado BLUE enfocados a la investigación y desarrollo de métodos para manipulación móvil en entornos exteriores no estructurados. Además, detallamos el hardware y software añadidos a BLUE en los últimos años y mostramos los paquetes y experimentos que se han realizado tanto para las tareas de localización y navegación, como para las operaciones de manipulación de objetos en robótica móvil.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Domestic waste detection and grasping points for robotic picking up

  • Gea, Víctor de
  • Puente Méndez, Santiago T.
  • Gil, Pablo
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Puente Méndez, Santiago T.|||/items/b02d19c1-e93f-45cd-9367-7c228d585248
This paper presents an AI system applied to location and robotic grasping. Experimental setup is based on a parameter study to train a deep-learning network based on Mask-RCNN to perform waste location in indoor and outdoor environment, using five different classes and generating a new waste dataset. Initially the AI system obtain the RGBD data of the environment, followed by the detection of objects using the neural network. Later, the 3D object shape is computed using the network result and the depth channel. Finally, the shape is used to compute grasping for a robot arm with a two-finger gripper. The objective is to classify the waste in groups to improve a recycling strategy.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

OpenStreetMap-Based Autonomous Navigation With LiDAR Naive-Valley-Path Obstacle Avoidance

  • Muñoz-Bañón, Miguel Á.
  • Velasco, Edison P.
  • Candelas-Herías, Francisco A.
  • Torres, Fernando
  • Candelas-Herías, Francisco A.|||/items/d4ce6549-c436-439d-ab35-c08c9c4398c2
  • Muñoz-Bañón, Miguel Á.|||/items/aaa2466d-a60d-4d03-9607-36d34ecacc9a
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
  • Velasco, Edison P.|||/items/66a95307-8df4-43a8-ac52-24c774c581ab
OpenStreetMaps (OSM) is currently studied as the environment representation for autonomous navigation. It provides advantages such as global consistency, a heavy-less map construction process, and a wide variety of road information publicly available. However, the location of this information is usually not very accurate locally. In this paper, we present a complete autonomous navigation pipeline using OSM information as environment representation for global planning. To avoid the flaw of local low-accuracy, we offer the novel LiDAR-based Naive-Valley-Path (NVP) method that exploits the concept of “valley” areas to infer the local path always furthest from obstacles. This behavior allows navigation always through the center of trafficable areas following the road’s shape independently of OSM error. Furthermore, NVP is a naive method that is highly sample-time-efficient. This time efficiency also enables obstacle avoidance, even for dynamic objects. We demonstrate the system’s robustness in our research platform BLUE, driving autonomously across the University of Alicante Scientific Park for more than 20 km with 0.24 meters of average error against the road’s center with a 19.8 ms of average sample time. Our vehicle avoids static obstacles in the road and even dynamic ones, such as vehicles and pedestrians.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Virtualization of Robotic Hands Using Mobile Devices

  • Puente Méndez, Santiago T.
  • Mas Lillo, Lucía
  • Torres, Fernando
  • Candelas-Herías, Francisco A.
  • Candelas-Herías, Francisco A.|||/items/d4ce6549-c436-439d-ab35-c08c9c4398c2
  • Puente Méndez, Santiago T.|||/items/b02d19c1-e93f-45cd-9367-7c228d585248
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
This article presents a multiplatform application for the tele-operation of a robot hand using virtualization in Unity 3D. This approach grants usability to users that need to control a robotic hand, allowing supervision in a collaborative way. This paper focuses on a user application designed for the 3D virtualization of a robotic hand and the tele-operation architecture. The designed system allows for the simulation of any robotic hand. It has been tested with the virtualization of the four-fingered Allegro Hand of SimLab with 16 degrees of freedom, and the Shadow hand with 24 degrees of freedom. The system allows for the control of the position of each finger by means of joint and Cartesian co-ordinates. All user control interfaces are designed using Unity 3D, such that a multiplatform philosophy is achieved. The server side allows the user application to connect to a ROS (Robot Operating System) server through a TCP/IP socket, to control a real hand or to share a simulation of it among several users. If a real robot hand is used, real-time control and feedback of all the joints of the hand is communicated to the set of users. Finally, the system has been tested with a set of users with satisfactory results.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

vision2tactile: Feeling Touch by Sight

  • Zapata-Impata, Brayan S.
  • Gil, Pablo
  • Torres, Fernando
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Latest trends in robotic grasping combine vision and touch for improving the performance of systems at tasks like stability prediction. However, tactile data are only available during the grasp, limiting the set of scenarios in which multimodal solutions can be applied. Could we obtain it prior to grasping? We explore the use of visual perception as a stimulus for generating tactile data so the robotic system can ”feel” the response of the tactile perception just by looking at the object.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Implementación y evaluación de un sistema multi-GNSS en un vehículo terrestre no tripulado, Integration and Evaluatioon of a Multi-GNSS System in an Unmanned Ground Vehicle

  • Velasco, Edison P.
  • Muñoz-Bañón, Miguel Á.
  • Candelas-Herías, Francisco A.
  • Puente Méndez, Santiago T.
  • Candelas-Herías, Francisco A.|||/items/d4ce6549-c436-439d-ab35-c08c9c4398c2
  • Muñoz-Bañón, Miguel Á.|||/items/aaa2466d-a60d-4d03-9607-36d34ecacc9a
  • Puente Méndez, Santiago T.|||/items/b02d19c1-e93f-45cd-9367-7c228d585248
  • Velasco, Edison P.|||/items/66a95307-8df4-43a8-ac52-24c774c581ab
En este trabajo se presenta un sistema Multi-GNSS de bajo coste conformado por 3 módulos UbloxNeo-m8n que ha sido implementado sobre un vehículo terrestre no tripulado, y se compara con un sistema GNSS-RTK (u-blox C94-M8P). La redundancia de datos del sistema multi-GNSS permite un mayor número de muestras y un mejor filtrado de datos. Mediante experimentos en distintos circuitos, se han obtenido resultados donde el sistema puede llegar a una frecuencia de muestreo de 3 Hz. Además, el sistema Multi-GNSS presenta un menor error que en un sistema GNSS-RTK (ublox C94-M8P) cuando este último no tiene línea de vista directa hacia su antena base RTK.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Framework for Fast Experimental Testing of Autonomous Navigation Algorithms

  • Muñoz-Bañón, Miguel Á.
  • del Pino, Iván
  • Candelas-Herías, Francisco A.
  • Torres, Fernando
  • Candelas-Herías, Francisco A.|||/items/d4ce6549-c436-439d-ab35-c08c9c4398c2
  • Muñoz-Bañón, Miguel Á.|||/items/aaa2466d-a60d-4d03-9607-36d34ecacc9a
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Research in mobile robotics requires fully operative autonomous systems to test and compare algorithms in real-world conditions. However, the implementation of such systems remains to be a highly time-consuming process. In this work, we present an robot operating system (ROS)-based navigation framework that allows the generation of new autonomous navigation applications in a fast and simple way. Our framework provides a powerful basic structure based on abstraction levels that ease the implementation of minimal solutions with all the functionalities required to implement a whole autonomous system. This approach helps to keep the focus in any sub-problem of interest (i.g. localization or control) while permitting to carry out experimental tests in the context of a complete application. To show the validity of the proposed framework we implement an autonomous navigation system for a ground robot using a localization module that fuses global navigation satellite system (GNSS) positioning and Monte Carlo localization by means of a Kalman filter. Experimental tests are performed in two different outdoor environments, over more than twenty kilometers. All the developed software is available in a GitHub repository.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Predicción de la Estabilidad en Tareas de Agarre Robótico con Información Táctil

  • Zapata-Impata, Brayan S.
  • Gil, Pablo
  • Torres, Fernando
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
En tareas de manipulación robótica es de especial interés detectar si un agarre es estable o por el contrario, el objeto agarrado se desliza entre los dedos debido a un contacto inadecuado. Con frecuencia, la inestabilidad en el agarre puede ser como consecuencia de una mala pose de la mano o pinza robótica durante su ejecución y o una presión de contacto insuficiente a la hora de ejercer la tarea. El empleo de información táctil y la representación de ésta es vital para llevar a cabo la predicción de estabilidad en el agarre. En este trabajo, se presentan y comparan distintas metodologías para representar la información táctil, así como los métodos de aprendizaje más adecuados en función de la representación táctil escogida.
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Implementación y evaluación de un sistema multi-GNSS en un vehículo terrestre no tripulado, Integration and Evaluatioon of a Multi-GNSS System in an Unmanned Ground Vehicle

  • Velasco, Edison P.
  • Muñoz-Bañón, Miguel Ángel
  • Candelas, Francisco A.
  • Puente, Santiago T.
[Resumen] En este trabajo se presenta un sistema Multi-GNSS de bajo coste conformado por 3 módulos UbloxNeo-m8n que ha sido implementado sobre un vehículo terrestre no tripulado, y se compara con un sistema GNSS-RTK (u-blox C94-M8P). La redundancia de datos del sistema multi-GNSS permite un mayor número de muestras y un mejor filtrado de datos. Mediante experimentos en distintos circuitos, se han obtenido resultados donde el sistema puede llegar a una frecuencia de muestreo de 3 Hz. Además, el sistema Multi-GNSS presenta un menor error que en un sistema GNSS-RTK (ublox C94-M8P) cuando este último no tiene línea de vista directa hacia su antena base RTK., [Abstract] In this work, we present a low cost Multi-GNSS system that has 3 UbloxNeo-M8N modules in an Unmanned Ground Vehicle and this is compared with a GNSS-RTK system (u-blox C94-M8P). Data redundancy of the Multi-GNSS system allows a greater number of samples and better filtering data. Through experiments on different circuits, we obtained sample rates of 3 Hz. In addition, the Multi-GNSS system has a smaller error compared to a GNSSRTK system (u-blox C94-M8P) when it doesn’t have a direct line view of the RTK base station., Este trabajo ha sido realizado como parte del proyecto RTI2018-094279-B-I00, financiado por el Ministerio de Ciencia, Innovación y Universidades, por la Generalitat Valenciana y el Fondo Europeo de Desarrollo Regional (FEDER), a través de las becas PRE2019-088069 y ACIF/2019/088 respectivamente.