Pasar al contenido principal

GESTION DE UNA ARQUITECTURA JERARQUICA FOG-TO-CLOUD PARA ESCENARIOS IOT: COMPARTICION DE RECURSOS

RTI2018-094532-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Towards a resilient control architecture for combined fog-to-cloud systems

  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Sánchez López, Sergio|||0000-0002-3922-2298
  • Jurnet Bolarin, Alejandro|||0000-0003-2553-5338
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Jukan, Admela
  • Ren, Guang-Jie
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The capacity to efficiently manage the whole set of resources from the edge up to the cloud paves the way to a new landscape of innovative opportunities for all involved actors, be it on the research or industrial sides. Fog-to-Cloud (F2C) has been recently proposed as a management solution particularly tailored to manage the stack of resources from the edge up to the cloud in a coordinated way. However, beyond the benefits brought by considering all the spectrum of resources to run a service, resilience, as a concept must be reflected in the F2C design. In this paper, we address a particular scenario where a specific node failure in the F2C architecture will substantially impact on the whole system performance, and analyse three tentative strategies to efficiently manage such scenario., This work was partially supported by the H2020 mF2C project 730929 and for the UPC authors also by the Spanish Ministry of Economy and Competitiveness and by the European Regional Development Fund, under contract RTI2018-094532-B-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Securing combined Fog-to-Cloud systems: challenges and directions

  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Gómez Cárdenas, Alejandro|||0000-0002-9379-2697
Nowadays, fog computing is emerged for providing computational power closer to the users. Fog computing brings real-time processing, lowlatency, geo-distributed and etc. Although, fog computing do not come to compete cloud computing, it comes to collaborate. Recently, Fog-To-Cloud (F2C) continuum system is introduced to provide hierarchical computing system and facilitates fog-cloud collaboration. This F2C continuum system might encounter security issues and challenges due to their hierarchical and distributed nature. In this paper, we analyze attacks in different layer of F2C system and identify most potential security requirements and challenges for the F2C continuum system. Finally, we introduce the most remarkable efforts and trends for bringing secure F2C system., This work is supported by the H2020 projects mF2C (730929). It is also supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund both under contract RTI2018-094532-B-100., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Cybersecurity in ict supply chains: Key challenges and a relevant architecture

  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Ruiz Jiménez, Francisco José
  • Jukan, Admela
  • Trakadas, Panagiotis
  • Cernivec, Ales
  • Lioy, Antonio
  • Lopez, Diego
  • Santos, Henrique
  • Gonos, Antonis
  • Silva, Ana
  • Soriano Díaz, José
  • Kalogiannis, Grigorios
The specific demands of supply chains built upon large and complex IoT systems, make it a must to design a coordinated framework for cyber resilience provisioning, intended to guarantee trusted supply chains of ICT systems, built upon distributed, dynamic, potentially insecure, and heterogeneous ICT infrastructures. As such, the solution proposed in this paper is envisioned to deal with the whole supply chain system components, from the IoT ecosystem to the infrastructure connecting them, addressing security and privacy functionalities related to risks and vulnerabilities management, accountability, and mitigation strategies, as well as security metrics and evidence-based security assurance. In this paper, we present FISHY as a preliminary architecture that is designed to orchestrate existing and beyond state-of-the-art security appliances in composed ICT scenarios. To this end, the FISHY architecture leverages the capabilities of programmable networks and IT infrastructure through seamless orchestration and instantiation of novel security services, both in real-time and proactively. The paper also includes a thorough business analysis to go far beyond the technical benefits of a potential FISHY adoption, as well as three real-world use cases highlighting the envisioned benefits of a potential FISHY adoption., This research was funded by H2020 FISHY Project, grant number 952644, and for UPC authors by the Spanish Ministry of Science, Innovation and Universities and FEDER, grant number RTI2018-094532-B-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

An edge-based strategy for smart advertising

  • Seyghaly, Rasool|||0000-0002-2805-5607
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Masip Bruin, Xavier|||0000-0002-4755-556X
Smart advertising creates awareness about some offer with a more direct, personalized and interactive focus. In this area, AROUND is a social network aimed at providing smart advertising to suggest appealing business to their customers and friends. The AROUND system is supported by a sophisticated recommender system, which considers not only the customers historical behaviours, but also their current mood and accurate location. In such smart recommendation systems, the response time for the personalized advertising is critical for a successful users’ quality of experience. In this research work we first evaluate the current performance of the AROUND system in terms of processing and communication times considering that, nowadays, this social network has more than 3 million users. The current implementation of the system relies on the deployment of a network of beacons, and uses a domestic cloud provider as the main infrastructure. We show that when the number of concurrent requests becomes too high, the response time faces some limitations. In order to address this issue, we discuss several alternatives, and propose the use of an edge-based strategy as a solution for fast response time. In the experimental section, we measure the performance of the AROUND system, both in our current infrastructure at the cloud and with an edge-based approach, and show the additional advantages of leveraging the edge-based strategy even in the case of overloading the cloud capacity., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and by the European Regional Development Fund (FEDER) under contract RTI2018-094532-B-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Deploying fog-to-cloud towards a security architecture for critical infrastructure scenarios

  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marcer Albareda, Pau
  • Marín Tordera, Eva|||0000-0002-2039-8277
Critical infrastructures are bringing security, and safety for people in terms of healthcare, water, electricity, industry, transportation, etc. The huge amount of data produced by CIs need to be aggregated, filtered, and stored. Cloud computing was merged into the CIs for utilizing cloud data centers as a pay-as-you-go online computing system for outsourcing services for data storage, filtering and aggregating. On the other hand, CIs need real-time processing for providing sophisticated services to people. Consequently, fog computing is merged into CIs aimed at providing services closer to the users, turning into a smooth real-time decision making and processing. When considering both, that is fog and cloud (for example, deploying the recently coined hierarchical fog-to-cloud F2C concept), new enriched features may be applied to the CIs. Security in CIs is one of the most essential challenges since any failure or attack can turn into a national wise disaster. Moreover, CIs also need to support quality of service (QoS) guarantees for users. Thus, bringing balanced QoS vs security is one of the main challenges for any CI infrastructure. In this paper, we illustrate the benefits of deploying an F2C system in CIs, particularly identifying specific F2C security requirements to be applied to CIs. Finally, we also introduce a decoupled security architecture specifically tailored to CIs that can bring security with reasonable QoS in terms of authentication and key distribution time delay., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018-094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

SFDDM: a secure distributed database management in combined fog-to-cloud systems

  • Sengupta, Souvik|||0000-0002-0056-1540
  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • García Almiñana, Jordi|||0000-0002-3515-7150
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Technological revolutions have greatly increased the use of IoT devices for our daily life. Driving the fact that everything surrounding us is getting connected what turns into an unstoppable increase in the amount of data produced. This data represents the state of diverse environmental events and helps to control a large set of distinct activities. So, accurate and secure management of this data is essential for any computing platform. Moreover, in order to provide real-time services in a distributed system (i.e., smart city), the data should be properly and securely managed. It is well known that shifting these tasks to the edge (i.e., near to the end users), highly facilitates these two objectives. The recently proposed Fog-to-Cloud (F2C) model is intended to enable data processing near to the edge, which helps to get better latency-sensitive services. However, some challenges remain to accurately and securely manage this data over the system, mainly due to the distributed F2C nature. Thus, considering these facts and challenges, in this paper we propose an architectural solution aimed at building a secure distributed database for F2C systems. Then, considering a real-case scenario, we perform some tests to measure the performance of our proposing schema. Finally, by comparing the performance between traditional cloud, fog/edge based execution model and our proposing SFDDM, we validate the effectiveness of our proposing schema., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018- 094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A multidimensional control architecture for combined fog-to-cloud systems

  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Souza, Vitor Barbosa
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Ren, Guang-Jie
  • Jukan, Admela
  • García Almiñana, Jordi|||0000-0002-3515-7150
The fog/edge computing concept has set the foundations for the deployment of new services leveraging resources deployed at the edge paving the way for an innovative collaborative model, where end-users may collaborate with service providers by sharing idle resources at the edge of the network. Combined Fog-to-Cloud (F2C) systems have been recently proposed as a control strategy for managing fog and cloud resources in a coordinated way, aimed at optimally allocating resources within the fog-to-cloud resources stack for an optimal service execution. In this work, we discuss the unfeasibility of the deployment of a single control topology able to optimally manage a plethora of edge devices in future networks, respecting established SLAs according to distinct service requirements and end-user profiles. Instead, a multidimensional architecture, where distinct control plane instances coexist, is then introduced. By means of distinct scenarios, we describe the benefits of the proposed architecture including how users may collaborate with the deployment of novel services by selectively sharing resources according to their profile, as well as how distinct service providers may benefit from shared resources reducing deployment costs. The novel architecture proposed in this paper opens several opportunities for research, which are presented and discussed at the final section., This work was supported by the H2020 EU mF2C project, ref. 730929 and for UPC authors, also by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under contract RTI2018-094532-B-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

An architectural schema for performance prediction using machine learning in the fog-to-cloud paradigm

  • Sengupta, Souvik|||0000-0002-0056-1540
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Prieto González, Andrés
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The Fog-to-Cloud (F2C) paradigm is emerging to both provide higher functional efficiency for latency-sensitive services and also help modern computing systems to be more intelligent. As it is still in its infancy, the biggest challenge for this domain is to build a proper resource allocation technique as part of an efficient resource management module. The diversified and distributed nature of that paradigm creates some additional hurdles for choosing the appropriate resources for executing some tasks. Significantly, efficient resource consumption estimation and performance forecasting are core issues in the design and development of a proper and smart resource management mechanism for F2C systems. Considering this fact, in this paper, we aim at designing an architectural framework for a prediction-based resource management mechanism for F2C systems. The performance prediction is based on supervised machine learning technology. The proposal has been evaluated and validated by predicting the performance and resources usage of F2C resources through several tests. Primarily, we have run an image recognition application on different F2C resources and collected performance-related information and resource consumption information. Then, by adopting the multivariate regression methodology, we perform some standard machine learning techniques to predict the performance and estimate the resource consumption of the F2C resources. Finally, to justify the effectiveness of our proposal, we calculated the value of a cost function between estimated values and the real measured values., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018- 094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Managing the cloud continuum: lessons learnt from a real fog-to-cloud deployment

  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Sánchez López, Sergio|||0000-0002-3922-2298
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Jukan, Admela
  • Juan Ferrer, Ana
  • Queralt Calafat, Anna|||0000-0003-2782-2955
  • Salis, Antonio
  • Bartoli, Andrea
  • Cankar, Matija
  • Cordeiro, Cristovao
  • Jensen, Jens
  • Kennedy, John D.
The wide adoption of the recently coined fog and edge computing paradigms alongsideconventional cloud computing creates a novel scenario, known as the cloud continuum, whereservices may benefit from the overall set of resources to optimize their execution. To operatesuccessfully, such a cloud continuum scenario demands for novel management strategies, enablinga coordinated and efficient management of the entire set of resources, from the edge up to thecloud, designed in particular to address key edge characteristics, such as mobility, heterogeneity andvolatility. The design of such a management framework poses many research challenges and hasalready promoted many initiatives worldwide at different levels. In this paper we present the resultsof one of these experiences driven by an EU H2020 project, focusing on the lessons learnt from a realdeployment of the proposed management solution in three different industrial scenarios. We thinkthat such a description may help understand the benefits brought in by a holistic cloud continuummanagement and also may help other initiatives in their design and development processes., This research was funded by H2020 mF2C Project, grant number 730929, and for UPCauthors by the Spanish Ministry of Science, Innovation and Universities and FEDER, grant numberRTI2018-094532-B-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Enhanced rank-based model for selecting controllers in dynamic and heterogeneous fog environments

  • Souza Costa, Marcus Vinícius
  • Souza, Vitor Barbosa
  • Masip Bruin, Xavier|||0000-0002-4755-556X
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Fog computing is a recent paradigm leveraging available resources at the edge of the network intended to extend the traditional cloud model towards the novel cloud continuum computing model. Recognized the unstoppable growth of highly dynamic and heterogeneous edge devices, as well as the pop up of a large set of diverse and ever more demanding services, the selection of those edge resources best meeting service requirements while also matching the expected QoS guarantees is, with no doubt, a challenging task. This paper presents a rankbased model aimed at both evaluating edge nodes’ characteristics and selecting nodes best performing the controller role, whilst simultaneously satisfying the required QoS constraints, coining the so-called Control-as-a-Service concept. To that end, a yet simple prediction strategy, based on Dynamic Branch Prediction is introduced to avoid unnecessary controller exchanges and QoS degradation. In the performed experiments, the proposed method yielded a reduction in the number of exchanges when compared to a solution with no prediction, under different scenarios. Comparing distinct selection strategies, the proposed model presented an improvement in controller availability as well as in relevant controllers’ characteristics, such as battery and memory capacity., This work is supported by FAPEMIG, CNPq, and CAPES. For the UPC author this work was supported by FEDER under contract RTI2018-094532-B-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An IIoT based ICS to improve safety through fast and accurate hazard detection and differentiation

  • Moradbeikie, Azin
  • Jamshidi, Kamal
  • Bohlooli, Ali
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Masip Bruin, Xavier|||0000-0002-4755-556X
Safety and security of Industrial Control Systems (ICS) applied in many critical infrastructures is essential. In these systems, hazards can be due either to system failure or cyber-attacks factors. Accurate hazard detection and reducing reconfiguration time after hazard is one of the most important objectives in these systems. One of the procedures that can reduce the reconfiguration time is determining the cause of hazards and, based on the aforementioned factors, adopting the best commands in reconfiguration time. However, it is difficult to differentiate between different types of hazard because their effects on the system can be similar. With the advent of IoT into ICS, known as IIoT, it has become possible to differentiate the hazards through the adoption of data from different IIoT sensors in the environment. In this article, we propose a risk management approach that identifies hazards based on the physical nature of these systems with the support from the IIoT. The identified hazards fall into four categories: stealthy attack, random attack, transient failure, and permanent failure. Then, the reconfiguration process is run based on the proposed differentiation, which provides a better performance and reconfiguration time. In the experimental section, a fluid storage system is simulated, showing 97% correct differentiation of hazards and reducing in 60% the lost time in the system recovery reconfiguration., This work is supported by the Spanish Ministry of Economy and Competitiveness and by the European Regional Development Fund under Contract RTI2018-094532-B-I00 (MINECO/FEDER)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Managing the cloud continuum: lessons learnt from a real fog-to-cloud deployment

  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Sánchez López, Sergio
  • García Almiñana, Jordi
  • Jukan, Admela
  • Juan Ferrer, Ana
  • Queralt Calafat, Anna
  • Salis, Antonio
  • Bartoli, Andrea
  • Cankar, Matija
  • Cordeiro, Cristovao
  • Jensen, Jens
  • Kennedy, John D.
The wide adoption of the recently coined fog and edge computing paradigms alongsideconventional cloud computing creates a novel scenario, known as the cloud continuum, whereservices may benefit from the overall set of resources to optimize their execution. To operatesuccessfully, such a cloud continuum scenario demands for novel management strategies, enablinga coordinated and efficient management of the entire set of resources, from the edge up to thecloud, designed in particular to address key edge characteristics, such as mobility, heterogeneity andvolatility. The design of such a management framework poses many research challenges and hasalready promoted many initiatives worldwide at different levels. In this paper we present the resultsof one of these experiences driven by an EU H2020 project, focusing on the lessons learnt from a realdeployment of the proposed management solution in three different industrial scenarios. We thinkthat such a description may help understand the benefits brought in by a holistic cloud continuummanagement and also may help other initiatives in their design and development processes., This research was funded by H2020 mF2C Project, grant number 730929, and for UPCauthors by the Spanish Ministry of Science, Innovation and Universities and FEDER, grant numberRTI2018-094532-B-I00., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An architectural schema for performance prediction using machine learning in the fog-to-cloud paradigm

  • Sengupta, Souvik
  • García Almiñana, Jordi
  • Masip Bruin, Xavier
  • Prieto González, Andrés
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The Fog-to-Cloud (F2C) paradigm is emerging to both provide higher functional efficiency for latency-sensitive services and also help modern computing systems to be more intelligent. As it is still in its infancy, the biggest challenge for this domain is to build a proper resource allocation technique as part of an efficient resource management module. The diversified and distributed nature of that paradigm creates some additional hurdles for choosing the appropriate resources for executing some tasks. Significantly, efficient resource consumption estimation and performance forecasting are core issues in the design and development of a proper and smart resource management mechanism for F2C systems. Considering this fact, in this paper, we aim at designing an architectural framework for a prediction-based resource management mechanism for F2C systems. The performance prediction is based on supervised machine learning technology. The proposal has been evaluated and validated by predicting the performance and resources usage of F2C resources through several tests. Primarily, we have run an image recognition application on different F2C resources and collected performance-related information and resource consumption information. Then, by adopting the multivariate regression methodology, we perform some standard machine learning techniques to predict the performance and estimate the resource consumption of the F2C resources. Finally, to justify the effectiveness of our proposal, we calculated the value of a cost function between estimated values and the real measured values., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018- 094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

SFDDM: a secure distributed database management in combined fog-to-cloud systems

  • Sengupta, Souvik
  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier
  • García Almiñana, Jordi
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Technological revolutions have greatly increased the use of IoT devices for our daily life. Driving the fact that everything surrounding us is getting connected what turns into an unstoppable increase in the amount of data produced. This data represents the state of diverse environmental events and helps to control a large set of distinct activities. So, accurate and secure management of this data is essential for any computing platform. Moreover, in order to provide real-time services in a distributed system (i.e., smart city), the data should be properly and securely managed. It is well known that shifting these tasks to the edge (i.e., near to the end users), highly facilitates these two objectives. The recently proposed Fog-to-Cloud (F2C) model is intended to enable data processing near to the edge, which helps to get better latency-sensitive services. However, some challenges remain to accurately and securely manage this data over the system, mainly due to the distributed F2C nature. Thus, considering these facts and challenges, in this paper we propose an architectural solution aimed at building a secure distributed database for F2C systems. Then, considering a real-case scenario, we perform some tests to measure the performance of our proposing schema. Finally, by comparing the performance between traditional cloud, fog/edge based execution model and our proposing SFDDM, we validate the effectiveness of our proposing schema., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018- 094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Enhanced rank-based model for selecting controllers in dynamic and heterogeneous fog environments

  • Souza Costa, Marcus Vinícius
  • Souza, Vitor Barbosa
  • Masip Bruin, Xavier
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Fog computing is a recent paradigm leveraging available resources at the edge of the network intended to extend the traditional cloud model towards the novel cloud continuum computing model. Recognized the unstoppable growth of highly dynamic and heterogeneous edge devices, as well as the pop up of a large set of diverse and ever more demanding services, the selection of those edge resources best meeting service requirements while also matching the expected QoS guarantees is, with no doubt, a challenging task. This paper presents a rankbased model aimed at both evaluating edge nodes’ characteristics and selecting nodes best performing the controller role, whilst simultaneously satisfying the required QoS constraints, coining the so-called Control-as-a-Service concept. To that end, a yet simple prediction strategy, based on Dynamic Branch Prediction is introduced to avoid unnecessary controller exchanges and QoS degradation. In the performed experiments, the proposed method yielded a reduction in the number of exchanges when compared to a solution with no prediction, under different scenarios. Comparing distinct selection strategies, the proposed model presented an improvement in controller availability as well as in relevant controllers’ characteristics, such as battery and memory capacity., This work is supported by FAPEMIG, CNPq, and CAPES. For the UPC author this work was supported by FEDER under contract RTI2018-094532-B-I00., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An edge-based strategy for smart advertising

  • Seyghaly, Rasool
  • García Almiñana, Jordi
  • Masip Bruin, Xavier
Smart advertising creates awareness about some offer with a more direct, personalized and interactive focus. In this area, AROUND is a social network aimed at providing smart advertising to suggest appealing business to their customers and friends. The AROUND system is supported by a sophisticated recommender system, which considers not only the customers historical behaviours, but also their current mood and accurate location. In such smart recommendation systems, the response time for the personalized advertising is critical for a successful users’ quality of experience. In this research work we first evaluate the current performance of the AROUND system in terms of processing and communication times considering that, nowadays, this social network has more than 3 million users. The current implementation of the system relies on the deployment of a network of beacons, and uses a domestic cloud provider as the main infrastructure. We show that when the number of concurrent requests becomes too high, the response time faces some limitations. In order to address this issue, we discuss several alternatives, and propose the use of an edge-based strategy as a solution for fast response time. In the experimental section, we measure the performance of the AROUND system, both in our current infrastructure at the cloud and with an edge-based approach, and show the additional advantages of leveraging the edge-based strategy even in the case of overloading the cloud capacity., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and by the European Regional Development Fund (FEDER) under contract RTI2018-094532-B-I00., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An IIoT based ICS to improve safety through fast and accurate hazard detection and differentiation

  • Moradbeikie, Azin
  • Jamshidi, Kamal
  • Bohlooli, Ali
  • García Almiñana, Jordi
  • Masip Bruin, Xavier
Safety and security of Industrial Control Systems (ICS) applied in many critical infrastructures is essential. In these systems, hazards can be due either to system failure or cyber-attacks factors. Accurate hazard detection and reducing reconfiguration time after hazard is one of the most important objectives in these systems. One of the procedures that can reduce the reconfiguration time is determining the cause of hazards and, based on the aforementioned factors, adopting the best commands in reconfiguration time. However, it is difficult to differentiate between different types of hazard because their effects on the system can be similar. With the advent of IoT into ICS, known as IIoT, it has become possible to differentiate the hazards through the adoption of data from different IIoT sensors in the environment. In this article, we propose a risk management approach that identifies hazards based on the physical nature of these systems with the support from the IIoT. The identified hazards fall into four categories: stealthy attack, random attack, transient failure, and permanent failure. Then, the reconfiguration process is run based on the proposed differentiation, which provides a better performance and reconfiguration time. In the experimental section, a fluid storage system is simulated, showing 97% correct differentiation of hazards and reducing in 60% the lost time in the system recovery reconfiguration., This work is supported by the Spanish Ministry of Economy and Competitiveness and by the European Regional Development Fund under Contract RTI2018-094532-B-I00 (MINECO/FEDER)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Towards a resilient control architecture for combined fog-to-cloud systems

  • Masip Bruin, Xavier
  • Sánchez López, Sergio
  • Jurnet Bolarin, Alejandro
  • Marín Tordera, Eva
  • Jukan, Admela
  • Ren, Guang-Jie
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The capacity to efficiently manage the whole set of resources from the edge up to the cloud paves the way to a new landscape of innovative opportunities for all involved actors, be it on the research or industrial sides. Fog-to-Cloud (F2C) has been recently proposed as a management solution particularly tailored to manage the stack of resources from the edge up to the cloud in a coordinated way. However, beyond the benefits brought by considering all the spectrum of resources to run a service, resilience, as a concept must be reflected in the F2C design. In this paper, we address a particular scenario where a specific node failure in the F2C architecture will substantially impact on the whole system performance, and analyse three tentative strategies to efficiently manage such scenario., This work was partially supported by the H2020 mF2C project 730929 and for the UPC authors also by the Spanish Ministry of Economy and Competitiveness and by the European Regional Development Fund, under contract RTI2018-094532-B-I00., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Securing combined Fog-to-Cloud systems: challenges and directions

  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Gómez Cárdenas, Alejandro
Nowadays, fog computing is emerged for providing computational power closer to the users. Fog computing brings real-time processing, lowlatency, geo-distributed and etc. Although, fog computing do not come to compete cloud computing, it comes to collaborate. Recently, Fog-To-Cloud (F2C) continuum system is introduced to provide hierarchical computing system and facilitates fog-cloud collaboration. This F2C continuum system might encounter security issues and challenges due to their hierarchical and distributed nature. In this paper, we analyze attacks in different layer of F2C system and identify most potential security requirements and challenges for the F2C continuum system. Finally, we introduce the most remarkable efforts and trends for bringing secure F2C system., This work is supported by the H2020 projects mF2C (730929). It is also supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund both under contract RTI2018-094532-B-100., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Cybersecurity in ict supply chains: Key challenges and a relevant architecture

  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Ruiz Jiménez, Francisco José
  • Jukan, Admela
  • Trakadas, Panagiotis
  • Cernivec, Ales
  • Lioy, Antonio
  • Lopez, Diego
  • Santos, Henrique
  • Gonos, Antonis
  • Silva, Ana
  • Soriano Díaz, José
  • Kalogiannis, Grigorios
The specific demands of supply chains built upon large and complex IoT systems, make it a must to design a coordinated framework for cyber resilience provisioning, intended to guarantee trusted supply chains of ICT systems, built upon distributed, dynamic, potentially insecure, and heterogeneous ICT infrastructures. As such, the solution proposed in this paper is envisioned to deal with the whole supply chain system components, from the IoT ecosystem to the infrastructure connecting them, addressing security and privacy functionalities related to risks and vulnerabilities management, accountability, and mitigation strategies, as well as security metrics and evidence-based security assurance. In this paper, we present FISHY as a preliminary architecture that is designed to orchestrate existing and beyond state-of-the-art security appliances in composed ICT scenarios. To this end, the FISHY architecture leverages the capabilities of programmable networks and IT infrastructure through seamless orchestration and instantiation of novel security services, both in real-time and proactively. The paper also includes a thorough business analysis to go far beyond the technical benefits of a potential FISHY adoption, as well as three real-world use cases highlighting the envisioned benefits of a potential FISHY adoption., This research was funded by H2020 FISHY Project, grant number 952644, and for UPC authors by the Spanish Ministry of Science, Innovation and Universities and FEDER, grant number RTI2018-094532-B-I00., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A multidimensional control architecture for combined fog-to-cloud systems

  • Masip Bruin, Xavier
  • Souza, Vitor Barbosa
  • Marín Tordera, Eva
  • Ren, Guang-Jie
  • Jukan, Admela
  • García Almiñana, Jordi
The fog/edge computing concept has set the foundations for the deployment of new services leveraging resources deployed at the edge paving the way for an innovative collaborative model, where end-users may collaborate with service providers by sharing idle resources at the edge of the network. Combined Fog-to-Cloud (F2C) systems have been recently proposed as a control strategy for managing fog and cloud resources in a coordinated way, aimed at optimally allocating resources within the fog-to-cloud resources stack for an optimal service execution. In this work, we discuss the unfeasibility of the deployment of a single control topology able to optimally manage a plethora of edge devices in future networks, respecting established SLAs according to distinct service requirements and end-user profiles. Instead, a multidimensional architecture, where distinct control plane instances coexist, is then introduced. By means of distinct scenarios, we describe the benefits of the proposed architecture including how users may collaborate with the deployment of novel services by selectively sharing resources according to their profile, as well as how distinct service providers may benefit from shared resources reducing deployment costs. The novel architecture proposed in this paper opens several opportunities for research, which are presented and discussed at the final section., This work was supported by the H2020 EU mF2C project, ref. 730929 and for UPC authors, also by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under contract RTI2018-094532-B-I00., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Deploying fog-to-cloud towards a security architecture for critical infrastructure scenarios

  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier
  • Marcer Albareda, Pau
  • Marín Tordera, Eva
Critical infrastructures are bringing security, and safety for people in terms of healthcare, water, electricity, industry, transportation, etc. The huge amount of data produced by CIs need to be aggregated, filtered, and stored. Cloud computing was merged into the CIs for utilizing cloud data centers as a pay-as-you-go online computing system for outsourcing services for data storage, filtering and aggregating. On the other hand, CIs need real-time processing for providing sophisticated services to people. Consequently, fog computing is merged into CIs aimed at providing services closer to the users, turning into a smooth real-time decision making and processing. When considering both, that is fog and cloud (for example, deploying the recently coined hierarchical fog-to-cloud F2C concept), new enriched features may be applied to the CIs. Security in CIs is one of the most essential challenges since any failure or attack can turn into a national wise disaster. Moreover, CIs also need to support quality of service (QoS) guarantees for users. Thus, bringing balanced QoS vs security is one of the main challenges for any CI infrastructure. In this paper, we illustrate the benefits of deploying an F2C system in CIs, particularly identifying specific F2C security requirements to be applied to CIs. Finally, we also introduce a decoupled security architecture specifically tailored to CIs that can bring security with reasonable QoS in terms of authentication and key distribution time delay., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018-094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed, Postprint (author's final draft)