Pasar al contenido principal

TECNOLOGIAS DISRUPTIVAS DE FIBRA OPTICA DE PLASTICO

RTI2018-094669-B-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Coupled-core fiber Bragg gratings for low-cost sensing

  • Flores-Bravo, Jose A.
  • Zubia, Joseba
  • Villatoro, Joel
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Sensors based on Bragg gratings inscribed in conventional single mode fibers are expensive due to the need of a sophisticated, but low-speed, interrogation system. As an alternative to overcome this issue, in this work, it is proposed and demonstrated the use of coupled-core optical fiber Bragg gratings. It was found that the relative reflectivity from such gratings changed when the coupled-core fiber was subjected to point or periodic bending. This feature makes the interrogation of such gratings simple, fast, and cost-effective. The reflectivity changes of the gratings are attributed to the properties of the supermodes supported by the coupled-core fiber. As potential applications of the referred gratings, intensity-modulated vector bending and vibration sensing are demonstrated. We believe that the results reported here can pave the way to the development of many inexpensive sensors. Besides, coupled-core fiber Bragg gratings may expand the use of grating technology in other areas., This work is part of the Projects No. PGC2018-101997-B-I00 and RTI2018-094669-B-C31 funded by the MCIN/AEI/10.13039/501100011033/and FEDER, Una manera de hacer Europa; and the scholarship PAID-01-18 Granted by the Universitat Politecnica de Valencia.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of Fabrication Methods on the Performance of Luminescent Solar Concentrators Based on Doped Polymer Optical Fibers.

  • Arrospide, Eneko
  • Illarramendi, M. A.
  • Ayesta, I.
  • Guarrotxena, Nekane
  • García Ballesteros, Olga
  • Zubia, J.
  • Durana, G.
In this work, we detail two types of fabrication processes of four polymer optical fibers doped with lumogen dyes. The fiber preforms have been manufactured with two different methods: extrusion and casting. We have compared the performance of the two types of fibers as luminescent solar concentrators by calculating their optical efficiencies and concentration factors. The obtained results show better performance for those fibers manufactured by the casting process. We have also studied the photostability of the two types of fibers doped with the dye lumogen red under solar light radiation. A high thermal stability of the doped fibers has been observed., This work was funded in part by the Fondo Europeo de Desarrollo Regional (FEDER), in partby the Ministerio de Ciencia, Innovación y Universidades under projects RTC2019-007194-4, RTI2018-094669-B-C31 and MAT2014-5742-R and in part by the GobiernoVasco/Eusko Jaurlaritza IT933-16,ELKARTEK KK-2019/00101 (μ4Indust), and ELKARTEK KK-2019/00051 (SMARTRESNAK
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Plasmonic sensors based on tilted Bragg gratings in multicore optical fibers

  • Ortega Gómez, Ángel
  • Loyez, Médéric
  • Lobry, Maxime
  • Chah, Karima
  • Zubia, Joseba
  • Villatoro, Joel
  • Caucheteur, Christophe
Bare and gold-coated tilted fiber Bragg gratings (TFBGs) can nowadays be considered as a mature technology for volume and surface refractometric sensing, respectively. As for other technologies, a continuous effort is made towards the production of even more sensitive sensors, thereby enabling a high-resolution screening of the surroundings and the possible detection of rare events. To this aim, we study in this work the development of TFBG refractometers in 4-core fibers. In particular, we show that the refractometric sensitivity of the cut-off mode can reach 100 nm/RIU for a bare grating. Using another demodulation method, a tenfold sensitivity increase is obtained when tracking the extremum of the SPR (surface plasmon resonance) envelope for a gold-coated TFBG configuration. Immobilization of DNA probes was performed as a proof-of-concept to assess the high surface sensitivity of the device., Ministerio de Economía y Competitividad (PGC2018-101997-B-I00, RTI2018-094669-B-C31); Fonds De La Recherche Scientifique - FNRS (O001518F).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Sensitivity-optimized strongly coupled multicore fiber-based thermometer

  • Amorebieta, Josu
  • Ortega Gómez, Ángel
  • Fernández Bello, Rubén
  • Villatoro, Joel
  • Antonio-López, Enrique
  • Schülzgen, Axel
  • Zubia, Joseba
  • Amezcua-Correa, Rodrigo
  • Durana, Gaizka
In this paper, we report on a multicore fiber-based (MCF) temperature sensor that operates in a wide thermal range and that is robustly packaged to withstand harsh environments. To develop the sensor, the fundamentals concerning the effect of temperature on such fibers have been analyzed in detail to predict the most temperature sensitive MCF geometry. Thanks to it, the device, which operates in reflection mode and consists of a short segment of strongly coupled MCF fusion spliced to a standard single mode fiber, shows higher sensitivity than other devices with identical configuration. Regarding its packaging, it consists of an inner ceramic and two outer metallic tubes to provide rigidity and protection against impacts or dirt. The device was calibrated for a thermal range from −25 °C to 900 °C and a K-type thermocouple was used as reference. Our results suggest that the manufactured optical thermometer is as accurate as the electronic one, reaching a sensitivity up to 29.426 pm/°C with the advantage of being passive, compact and easy to fabricate and interrogate. Therefore, we believe this device is appealing for industrial applications that require highly sensitive temperature sensing in very demanding environments, and that the analysis included in this work could be analogously applied to develop sensitivity-optimized devices for other parameters of interest., Ministerio de Economía y Competitividad; Ministerio de Ciencia, Innovación y Universidades; European Regional Development Fund (PGC2018-101997-B-I00 and RTI2018-094669-B-C31); Gobierno Vasco/Eusko Jaurlaritza (IT933-16); ELKARTEK KK-2019/00101 (μ4Indust) and ELKARTEK KK-2019/00051 (SMARTRESNAK). The work of Josu Amorebieta is funded by a PhD fellowship from the University of the Basque Country UPV/EHU. The work of Angel Ortega-Gomez is funded by a PhD fellowship from the MINECO (Ministerio de Economía y Empresa de España).