Pasar al contenido principal

DESARROLLO Y APLICACION DE SENSORES PARA METALES FUNDIDOS EN REACTORES DE FUSION

RTI2018-095045-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT RAMON LLULL, FUNDACIO PRIVADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Li6BaLa2Ta2O12 Solid-State Probe for Studying Li Activity in Molten Sn-Li Alloys

  • Nel-lo, Marc
  • Lujan, Enric
  • Hinojo, Antonio
  • Colominas, Sergi
  • Abella, Jordi
Metals or alloys that are liquid at or near room temperature are of interest of the scientific community due to the versatility of their applications. Considering the nuclear fusion energy applications, Sn-Li alloys appear as a great candidate for plasma facing materials. However, plasma interactions can induce alterations on the lithium concentration and, as a consequence, modify the properties of the LM. Therefore, in order to prevent these situations, thermodynamic data such as activity coefficients and analytical devices capable of monitoring the lithium content in these alloys are of great interest. In this work, a lithium sensor based on the Li6BaLa2Ta2O12 solid-state electrolyte was used to determine lithium activity correlations for Sn-Li alloys at 400 and 500 °C. It was observed that the activity coefficient was constant for lithium concentrations lower than 8.5 at% with values, at the infinite dilution condition, of 8.4·10−5 at 400 °C and 2.7·10−4 at 500 °C, respectively. Above this concentration (from 8.5 to 16.5 at% Li), the activity coefficient varied with lithium concentration. In this case, correlations between lithium activity and the lithium atomic fraction were obtained., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Li6La3Ta1.5Y0.5O12 solid-state lithium sensor for molten alloys

  • Hinojo, Antonio
  • Nel-lo, Marc
  • Colominas, Sergi
  • Abella, Jordi
Different breeding blankets are proposed for tritium generation in nuclear fusion reactors. Some of the proposed strategies are based on the molten eutectic alloy Lithium - Lead. Since lithium will be consumed, this alloy's physical and chemical properties will vary as its composition changes. For this reason, analytical tools able to perform real-time and in-situ lithium monitoring are of great interest. Electrochemical sensors, based on lithium conducting solid-state electrolytes, are good candidates to fulfil these requirements and withstand the harsh chemical environment of the molten alloy. In this work, the synthesis and sintering conditions of the solid-state electrolyte Li6La3Ta1.5Y0.5O12 were optimized to obtain high-crystalline electrolyte pellets. XRD was used to verify the garnet structure needed for Li conduction. The quality of the sintering was evaluated using SEM-EDS and its ionic conductivity was measured using Electrochemical Impedance Spectroscopy (EIS) in argon, at temperatures between 30 °C and 200 °C. Finally, a lithium sensor was constructed and used in molten alloys. The obtained results were in good agreement with potentials calculated using the Nernst equation., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Lithium sensors based on Li6La3Ta1.5Y0.5O12 and Li6BaLa2Ta2O12 garnet electrolytes for molten lead alloys

  • Nel-lo, Marc
  • Ferrer, Òscar
  • Colominas, Sergi
  • Abella, Jordi
The development of effective breeding blankets is crucial to the success of future fusion reactors. One of the main liquid breeding candidates is molten eutectic Pb-Li. In this environment, it is essential to control lithium concentration and dosage to keep the adequate composition in the melt. In this frame, on-line and on-board lithium monitoring tools, which can operate under extreme conditions, are required. Electrochemical sensors based on lithium conducting solid electrolytes (Li6La3Ta1.5Y0.5O12 and Li6BaLa2Ta2O12) were designed and tested. These potentiometric sensors were used to measure the Open Circuit Potential (OCP) in molten lead-lithium alloys with different lithium concentrations. Measurements were performed at 400 °C, 500 °C, and 600 °C. Experimental OCP values were in good agreement with those calculated with the Nernst equation. OCP values showed a linear relationship versus the logarithm of the lithium activities, fulfilling the Nernst equation., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Lithium sensors based on Li6La3Ta1.5Y0.5O12 and Li6BaLa2Ta2O12 garnet electrolytes for molten lead alloys

  • Nel-lo, Marc
  • Ferrer, Òscar
  • Colominas, Sergi
  • Abella, Jordi
The development of effective breeding blankets is crucial to the success of future fusion reactors. One of the main liquid breeding candidates is molten eutectic Pb-Li. In this environment, it is essential to control lithium concentration and dosage to keep the adequate composition in the melt. In this frame, on-line and on-board lithium monitoring tools, which can operate under extreme conditions, are required. Electrochemical sensors based on lithium conducting solid electrolytes (Li6La3Ta1.5Y0.5O12 and Li6BaLa2Ta2O12) were designed and tested. These potentiometric sensors were used to measure the Open Circuit Potential (OCP) in molten lead-lithium alloys with different lithium concentrations. Measurements were performed at 400 °C, 500 °C, and 600 °C. Experimental OCP values were in good agreement with those calculated with the Nernst equation. OCP values showed a linear relationship versus the logarithm of the lithium activities, fulfilling the Nernst equation., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Li6BaLa2Ta2O12 Solid-State Probe for Studying Li Activity in Molten Sn-Li Alloys

  • Nel-lo, Marc
  • Lujan, Enric
  • Hinojo, Antonio
  • Colominas, Sergi
  • Abella, Jordi
Metals or alloys that are liquid at or near room temperature are of interest of the scientific community due to the versatility of their applications. Considering the nuclear fusion energy applications, Sn-Li alloys appear as a great candidate for plasma facing materials. However, plasma interactions can induce alterations on the lithium concentration and, as a consequence, modify the properties of the LM. Therefore, in order to prevent these situations, thermodynamic data such as activity coefficients and analytical devices capable of monitoring the lithium content in these alloys are of great interest. In this work, a lithium sensor based on the Li6BaLa2Ta2O12 solid-state electrolyte was used to determine lithium activity correlations for Sn-Li alloys at 400 and 500 °C. It was observed that the activity coefficient was constant for lithium concentrations lower than 8.5 at% with values, at the infinite dilution condition, of 8.4·10−5 at 400 °C and 2.7·10−4 at 500 °C, respectively. Above this concentration (from 8.5 to 16.5 at% Li), the activity coefficient varied with lithium concentration. In this case, correlations between lithium activity and the lithium atomic fraction were obtained., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Li6La3Ta1.5Y0.5O12 solid-state lithium sensor for molten alloys

  • Hinojo, Antonio
  • Nel-lo, Marc
  • Colominas, Sergi
  • Abella, Jordi
Different breeding blankets are proposed for tritium generation in nuclear fusion reactors. Some of the proposed strategies are based on the molten eutectic alloy Lithium - Lead. Since lithium will be consumed, this alloy's physical and chemical properties will vary as its composition changes. For this reason, analytical tools able to perform real-time and in-situ lithium monitoring are of great interest. Electrochemical sensors, based on lithium conducting solid-state electrolytes, are good candidates to fulfil these requirements and withstand the harsh chemical environment of the molten alloy. In this work, the synthesis and sintering conditions of the solid-state electrolyte Li6La3Ta1.5Y0.5O12 were optimized to obtain high-crystalline electrolyte pellets. XRD was used to verify the garnet structure needed for Li conduction. The quality of the sintering was evaluated using SEM-EDS and its ionic conductivity was measured using Electrochemical Impedance Spectroscopy (EIS) in argon, at temperatures between 30 °C and 200 °C. Finally, a lithium sensor was constructed and used in molten alloys. The obtained results were in good agreement with potentials calculated using the Nernst equation., info:eu-repo/semantics/acceptedVersion