Pasar al contenido principal

EXPERIMENTOS DE LABORATORIO, OBSERVACIONES Y MODELOS DE POLVO COMETARIO: UNA NUEVA ESTRATEGIA

RTI2018-095330-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Polarimetric imaging for the detection of synthetic models of SARS-CoV-2: a proof of concept

  • Gomez-Gonzalez, Emilio
  • Gómez Gutiérrez, Emilia, 1975-
  • García-Cózar, Francisco J.
  • Marquez-Rivas, Javier
Includes supplementary materials for the online appendix., Objective. To conduct a proof-of-concept study of the detection of two synthetic models of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) using polarimetric imaging. Approach. Two SARS-CoV-2 models were prepared as engineered lentiviruses pseudotyped with the G protein of the vesicular stomatitis virus, and with the characteristic Spike protein of SARS-CoV-2. Samples were prepared in two biofluids (saline solution and artificial saliva), in four concentrations, and deposited as 5-µL droplets on a supporting plate. The angles of maximal degree of linear polarization (DLP) of light diffusely scattered from dry residues were determined using Mueller polarimetry from87 samples at 405 nm and 514 nm. A polarimetric camera was used for imaging several samples under 380–420 nm illumination at angles similar to those of maximal DLP. Per-pixel image analysis included quantification and combination of polarization feature descriptors in 475 samples. Main results. The angles (from sample surface) of maximal DLP were 3° for 405 nm and 6° for 514 nm. Similar viral particles that differed only in the characteristic spike protein of the SARS-CoV-2, their corresponding negative controls, fluids, and the sample holder were discerned at 10-degree and 15-degree configurations. Significance. Polarimetric imaging in the visible spectrum may help improve fast, non-contact detection and identification of viral particles, and/or other microbes such as tuberculosis, in multiple dry fluid samples simultaneously, particularly when combined with other imaging modalities. Further analysis including realistic concentrations of real SARS-CoV-2 viral particles in relevant human fluids is required. Polarimetric imaging under visible light may contribute to a fast, cost-effective screening of SARS-CoV-2 and other pathogens when combined with other imaging modalities., This study was funded by grants number COV20–00080 and COV20–00173 of the 2020 Emergency Call for Research Projects about the SARS-CoV-2 virus and the COVID-19 disease of the Institute of Health ‘Carlos III’, Spanish Ministry of Science and Innovation, and by grant number EQC2019–006240-P funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. ABR was supported by grant number RTI2018–094465-J-I00 funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The work of OM, JCGM, and JLR has been partially funded by grant LEONIDAS (RTI2018–095330-B-100), and the Center of Excellence Severo Ochoa award to the Instituto de Astrofísica de Andalucía (SEV-2017–0709). This work has been supported by the European Commission through the Joint Research Center (JRC) HUMAINT project. The authors would like to gratefully acknowledge the assistance of the members of the Explosive Ordnance Disposal – Chemical, Biological, Radiological & Nuclear (EOD-CBRN) Group of the Spanish National Police, whose identities cannot be disclosed, and who are represented here by JMNG. The authors would like to express their special gratitude to Emilio Gomez-Gonzalez, who sadly passed away in January 2023, and whose wisdom and willingness have been key in the development of this work and many other projects.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Polarimetric imaging for the detection of synthetic models of SARS-CoV-2: A proof of concept

  • Gómez‑González, Emilio
  • Muñoz, Olga
  • Gómez Martín, Juan Carlos
  • Aceituno‑Castro, Jesús
  • Fernández‑Muñoz, Beatriz
  • Navas‑García, José Manuel
  • Barriga‑Rivera, Alejandro
  • Fernández‑Lizaranzu, Isabel
  • Munoz‑González, Francisco Javier
  • Parrilla‑Giráldez, Rubén
  • Requena‑Lancharro, Desiree
  • Gil‑Gamboa, Pedro
  • Ramos, José Luis
  • Rosell-Valle, Cristina
  • Gómez‑González, Carmen
  • Martín‑López, María
  • Relimpio López, María Isabel
  • Perales‑Esteve, Manuel A.
  • Puppo‑Moreno, Antonio
  • García Cózar, Francisco José
  • Olvera Collantes, Lucía
  • de los Santos‑Trigo, Silvia
  • Gómez, Emilia
  • Sánchez Pernaute, Rosario
  • Padillo‑Ruiz, Javier
  • Márquez‑Rivas, Javier
Objective: To conduct a proof-of-concept study of the detection of two synthetic models of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) using polarimetric imaging. Approach: Two SARS-CoV-2 models were prepared as engineered lentiviruses pseudotyped with the G protein of the vesicular stomatitis virus, and with the characteristic Spike protein of SARS-CoV-2. Samples were prepared in two biofluids (saline solution and artificial saliva), in four concentrations, and deposited as 5-µL droplets on a supporting plate. The angles of maximal degree of linear polarization (DLP) of light diffusely scattered from dry residues were determined using Mueller polarimetry from87 samples at 405 nm and 514 nm. A polarimetric camera was used for imaging several samples under 380–420 nm illumination at angles similar to those of maximal DLP. Per-pixel image analysis included quantification and combination of polarization feature descriptors in 475 samples. Main results: The angles (from sample surface) of maximal DLP were 3° for 405 nm and 6° for 514 nm. Similar viral particles that differed only in the characteristic spike protein of the SARS-CoV-2, their corresponding negative controls, fluids, and the sample holder were discerned at 10-degree and 15-degree configurations. Significance: Polarimetric imaging in the visible spectrum may help improve fast, non-contact detection and identification of viral particles, and/or other microbes such as tuberculosis, in multiple dry fluid samples simultaneously, particularly when combined with other imaging modalities. Further analysis including realistic concentrations of real SARS-CoV-2 viral particles in relevant human fluids is required. Polarimetric imaging under visible light may contribute to a fast, cost-effective screening of SARS-CoV-2 and other pathogens when combined with other imaging modalities., 12 páginas
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ground-based observability of Dimorphos DART impact ejecta: photometric predictions

  • Moreno, Fernando
  • Campo Bagatin, Adriano
  • Tancredi, Gonzalo
  • Liu, Po-Yen
  • Domínguez, Bruno
  • Campo Bagatin, Adriano|||/items/5a640451-5f0a-4f03-99b9-698d9cf5185b
  • Liu, Po-Yen|||/items/81c3df4f-e81f-4abb-9cb0-81806c5dee63
The Double Asteroid Redirection Test (DART) is a NASA mission intended to crash a projectile on Dimorphos, the secondary component of the binary (65803) Didymos system, to study its orbit deflection. As a consequence of the impact, a dust cloud will be be ejected from the body, potentially forming a transient coma- or comet-like tail on the hours or days following the impact, which might be observed using ground-based instrumentation. Based on the mass and speed of the impactor, and using known scaling laws, the total mass ejected can be roughly estimated. Then, with the aim to provide approximate expected brightness levels of the coma and tail extent and morphology, we have propagated the orbits of the particles ejected by integrating their equation of motion, and have used a Monte Carlo approach to study the evolution of the coma and tail brightness. For typical power-law particle size distribution of index –3.5, with radii rrmin = 1 μm and rmax = 1 cm, and ejection speeds near 10 times the escape velocity of Dimorphos, we predict an increase of brightness of ∼3 magnitudes right after the impact, and a decay to pre-impact levels some 10 d after. That would be the case if the prevailing ejection mechanism comes from the impact-induced seismic wave. However, if most of the ejecta is released at speeds of the order of ≳100 m s−1, the observability of the event would reduce to a very short time span, of the order of 1 d or shorter.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Lofting of low-speed ejecta produced in the DART experiment and production of a dust cloud

  • Tancredi, Gonzalo
  • Liu, Po-Yen
  • Campo Bagatin, Adriano
  • Moreno, Fernando
  • Domínguez, Bruno
  • Campo Bagatin, Adriano|||/items/5a640451-5f0a-4f03-99b9-698d9cf5185b
  • Liu, Po-Yen|||/items/81c3df4f-e81f-4abb-9cb0-81806c5dee63
NASA sent the Double Asteroid Redirection Test (DART) mission to impact Dimorphos, the satellite of the asteroid binary system (65803) Didymos. DART will release LICIACube prior to impact to obtain high-resolution post-impact images. The impact will produce a crater and a large amount of material ejected at high speed (several tens of m s−1), producing an ejecta cone that will quickly disperse. We analysed an additional effect: the lofting of material at low velocity due to the generation of seismic waves that propagate inside Dimorphos, producing surface shaking far from the impact point. We divide the process into different stages: from the generation of impact-induced waves, the interaction of them with surface particles, the ejection of dust particles at velocities, and the prediction of the observability of the dust coma and trail. We anticipate the following observable effects: (i) generation of a dust cloud that will produce a hazy appearance of Dimorphos’ surface, detectable by LICIACube; (ii) brightness increase of the binary system due to enhancement of the cross-section produced by the dust cloud; (iii) generation of a dust trail, similar to those observed in some Active Asteroids, which can last for several weeks after impact. Numerical prediction of the detectability of these effects depends on the amount and size distribution of ejected particles, which are largely unknown. In case these effects are observable, an inversion method can be applied to compute the amount of ejected material and its velocity distribution, and discuss the relevance of the shaking process.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light scattering from volcanic-sand particles in deposited and aerosol form

  • Zubko N.
  • Muñoz, Olga
  • Zubko E.
  • Gritsevich M.
  • Escobar Cerezo, Jesús
  • Berg M.J.
  • Peltoniemi J.
The light-scattering properties of volcanic sand collected in Iceland are studied here to characterize the sand particles and develop a reference for future remote-sensing observations. While such sand is common in Iceland, the smaller-size fraction can be readily transported by winds and found in the atmosphere at distant locations. The sand appears dark when deposited on a surface due to the high optical absorption of the material. Therefore, atmospheric regions containing such particles during a dust storm may absorb sunlight considerably, causing redistribution of solar energy. Here, we measure the angular scattered-light intensity and degree of linear polarization from the sand. This is done with two experimental apparatuses, the Cosmic Dust Laboratory (CoDuLab) at the Institute de Astrofísica de Andalucía (IAA) and the goniospectropolarimeter (FIGIFIGO) at the Finnish Geospatial Research Institute (FGI). Two scattering-scenarios of practical interest for remote-sensing applications are considered: (1) single sand-particles suspended in aerosol as an optically thin cloud, and (2) the same particles deposited on a substrate. We also model the measurements with the discrete dipole approximation to estimate the complex-valued refractive index m, where we find that m ≈ 1.6 + 0.01i at λ = 647 nm. Lastly, we present a comparative analysis of the polarimetric response of the sand particles with that reported in the literature for carbon-soot, another highly absorbing atmospheric contaminant. © 2019, This research was partially supported by the Academy of Finland Project no. 260027 and the COST Action MP1104 “Polarization as a tool to study the Solar System and beyond”. NZ acknowledges Magnus Ehrnrooth Foundation for the research travel support. This work also has been partially supported by contracts AYA2015-67152-R and RTI2018-095330-B-I00 ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The dust and gas environment of comet 8P/Tuttle

  • Gutiérrez, Pedro J.
  • Lara, Luisa María
  • Moreno, Fernando
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse, distribution, and reproduction in any medium, provided the original work is properly cited., Comet 8P/Tuttle has been selected as a possible backup target for the Comet Interceptor mission (ESA). This comet was observed intensively during its previous perihelion passage, in 2008 January. From those observations, important information was obtained about the physical properties of the nucleus and coma. This study focuses on the coma of 8P/Tuttle using visible spectra and images to derive gas and dust production rates. The production rates obtained suggest that this comet can be considered as 'typical' concerning the C2/CN and C3/CN ratios, although, depending on the criteria adopted, it could be defined as C3 depleted. NH2 production rates suggest an enrichment of this molecule. Visible and infrared images have been analysed using a Monte Carlo dust tail model. At comparatively large heliocentric distances, the coma is characterized by a dust-to-water ratio around or less than 1. Nevertheless, when the comet approaches perihelion, and the subsolar latitude crosses the equator, the coma dust-to-water ratio increases significantly, reaching values larger than six. Such a high dust-to-gas ratio around perihelion suggests that the nucleus of 8P/Tuttle is also 'typical' regarding the refractory content, considering the comparatively high values of that magnitude estimated for different comets. © 2021 The Author(s) 2021. Published by Oxford University Press on behalf of Royal Astronomical Society., The data presented here were obtained in part with ALFOSC, which is provided by the Instituto de Astrofísica de Andalucía (IAA) under a joint agreement with the University of Copenhagen and NOTSA. The research is also based on observations collected at the Centro Astronómico Hispano-Alemán (CAHA) at Calar Alto, operated jointly by Junta de Andalucía and Consejo Superior de Investigaciones Científicas (IAA-CSIC). This work is based in part on observations from the programme ID 40270 (PI: O. Groussin) DS_IDENT: ads/sa.spitzer#0024069632 made with the Spitzer Space Telescope, which was operated by the Jet Propulsion Laboratory, California Institute of Technology under a contract with NASA. The authors deeply acknowledge th.e priceless effort performed by both CARA (http://cara.uai.it/ and in particular to LIG02, Rolando Ligustri) and the Cometas_obs team (http://www.astrosurf.com/cometas-obs/, and in particular to Julio Castellano and Esteban Reina for sending the complete data set) in systematically observing comets and for making available to the community their very valuable estimates. The authors acknowledge financial support from the State Agency for Research of the Spanish MCIU through the ‘Centre of Excellence Severo Ochoa’ award to the Instituto de Astrofísica de Andalucía (SEV-2017-0709). LML and PJG acknowledge funding from project PGC2018-099425-B-I00 (MCI/AEI/FEDER, UE). FM acknowledges support from projects P18-RT-1854 (Junta de Andalucía) and RTI-2018-095330-B-100 (MCIU). This work has made use of NASA’s Astrophysics Data System Bibliographic Services and of the JPL’s Horizons system., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamics of irregularly shaped cometary particles subjected to outflowing gas and solar radiative forces and torques

  • Moreno, Fernando
  • Guirado, Daniel
  • Muñoz, Olga
  • Zakharov, Vladimir
  • Ivanovski, Stavro
  • Fulle, Marco
  • Rotundi, Alessandra
  • Frattin, E.
  • Bertini, Ivano
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse, distribution, and reproduction in any medium, provided the original work is properly cited, The dynamics of irregularly shaped particles subjected to the combined effect of gas drag and radiative forces and torques in a cometary environment is investigated. The equations of motion are integrated over distances from the nucleus surface up to distances where the gas drag is negligible. The aerodynamic forces and torques are computed assuming a spherically symmetric expanding gas. The calculations are limited to particle sizes in the geometric optics limit, which is the range of validity of our radiative torque calculations. The dynamical behaviour of irregular particles is quite different to those exhibited by non-spherical but symmetric particles such as spheroids. An application of the dynamical model to comet 67P/Churyumov–Gerasimenko, the target of the Rosetta mission, is made. We found that, for particle sizes larger than ∼10 μm, the radiative torques are negligible in comparison with the gas-driven torques up to a distance of ∼100 km from the nucleus surface. The rotation frequencies of the particles depend on their size, shape, and the heliocentric distance, while the terminal velocities, being also dependent on size and heliocentric distance, show only a very weak dependence on particle shape. The ratio of the sum of the particles projected areas in the sun-to-comet direction to that of the sum of the particles projected areas in any direction perpendicular to it is nearly unity, indicating that the interpretation of the observed u-shaped scattering phase function by Rosetta/OSIRIS on comet 67P coma cannot be linked to mechanical alignment of the particles. © The Author(s) 2021. Published by Oxford University Press on behalf of Royal Astronomical Society., FM, DG, and OM acknowledge financial support from the State Agency for Research of the Spanish MCIU through the ‘Center of Excellence Severo Ochoa’ award to the Instituto de Astrofísica de Andalucía (SEV-2017-0709). FM and DG also acknowledge financial support from the Spanish Plan Nacional de Astronomía y Astrofísica LEONIDAS project RTI2018-095330-B-100, and project P18-RT-1854 from Junta de Andalucía., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monte Carlo Models of Comet Dust Tails Observed from the Ground

  • Moreno, Fernando
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., Dust particles leaving the comet nucleus surface are entrained by the gas within the first few nuclear radius distances and are subjected to a complex hydrodynamical environment. From distances of about 20 nuclear radii outwards, the particles decouple from the accelerating gas and are mainly affected by solar gravity and radiation pressure for small-sized nuclei. Their motion is then a function of their so-called β parameter, which is the ratio of the radiation pressure force to gravity force, and their velocity when the gas drag vanishes. At a given observation time, the position of those particles projected on the sky plane form the coma, tail and trail structures that can be observed from ground-based or space-borne instrumentation. Monte Carlo models, based on the computer simulation of the Keplerian trajectories of a large set of dust particles, provide the best possible approach to extract the dust environment parameters from the observed scattered solar light or thermal emission. In this paper, we describe the Monte Carlo code along with some successful applications of such technique to a number of targets. © 2022 by the author. Licensee MDPI, Basel, Switzerland, This research was founded by the State Agency for Research of the Spanish MCIU through the “Center of Excellence Severo Ochoa” award to the Instituto de Astrofísica de Andalucía (SEV-2017-0709), the Spanish Plan Nacional de Astronomía y Astrofísica through LEONIDAS project RTI2018-095330-B-100, and the Junta de Andalucía P18-RT-1854 project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ground-based observability of Dimorphos DART impact ejecta: photometric predictions

  • Moreno, Fernando
  • Campo Bagatin, Adriano
  • Tancredi, Gonzalo
  • Liu, Po-Yen
  • Domínguez, Bruno
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse, distribution, and reproduction in any medium, provided the original work is properly cited., The Double Asteroid Redirection Test (DART) is a NASA mission intended to crash a projectile on Dimorphos, the secondary component of the binary (65803) Didymos system, to study its orbit deflection. As a consequence of the impact, a dust cloud will be be ejected from the body, potentially forming a transient coma- or comet-like tail on the hours or days following the impact, which might be observed using ground-based instrumentation. Based on the mass and speed of the impactor, and using known scaling laws, the total mass ejected can be roughly estimated. Then, with the aim to provide approximate expected brightness levels of the coma and tail extent and morphology, we have propagated the orbits of the particles ejected by integrating their equation of motion, and have used a Monte Carlo approach to study the evolution of the coma and tail brightness. For typical power-law particle size distribution of index –3.5, with radii rrmin = 1 μm and rmax = 1 cm, and ejection speeds near 10 times the escape velocity of Dimorphos, we predict an increase of brightness of ∼3 magnitudes right after the impact, and a decay to pre-impact levels some 10 d after. That would be the case if the prevailing ejection mechanism comes from the impact-induced seismic wave. However, if most of the ejecta is released at speeds of the order of ≳100 m s−1, the observability of the event would reduce to a very short time span, of the order of 1 d or shorter. © The Author(s) 2022. Published by Oxford University Press on behalf of Royal Astronomical Society., FM acknowledges financial support from the State Agency for Research of the Spanish MCIU through the ‘Center of Excellence Severo Ochoa’ award to the Instituto de Astrofísica de Andalucía (SEV-2017-0709). FM also acknowledges financial support from the Spanish Plan Nacional de Astronomía y Astrofísica LEONIDAS project RTI2018-095330-B-100, and project P18-RT-1854 from Junta de Andalucía. ACB and PYL acknowledge funding by the SU-SPACE-23-SEC-2019 EC-H2020 NEO-MAPP project (GA 870377). ACB also acknowledges funding by the Spanish Ministerio de Ciencia e Innovación RTI2018-099464-B-I00 project. GT and BD acknowledge finantial support from project FCE-1-2019-1-156451 of the Agencia Nacional de Investigación e Innovación ANII (Uruguay). This work has made use of NASA’s Astrophysics Data System Bibliographic Services and of the JPL’s Horizons system., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental phase function and degree of linear polarization curve of olivine and spinel and the origin of the Barbarian polarization behaviour

  • Frattin, E.
  • Martikainen, Julia
  • Muñoz, Olga
  • Gómez Martín, Juan Carlos
  • Jardiel, Teresa
  • Cellino, Alberto
  • Libourel, G.
  • Muinonen, K.
  • Peiteado, Marco
  • Tanga, Paolo
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse, distribution, and reproduction in any medium, provided the original work is properly cited., We explore experimentally possible explanations of the polarization curves of the sunlight reflected by the Barbarian asteroids. Their peculiar polarization curves are characterized by a large-inversion angle, around 30°, which could be related to the presence of FeO-bearing spinel embedded in Calcium–Aluminum inclusions. In order to test this hypothesis, we have measured the phase function and degree of linear polarization of six samples of Mg-rich olivine and spinel. For each material, we have analysed the light scattering properties of a millimeter-sized grain and of two powdered samples with size distributions in the micrometer size range. The three spinel samples show a well-defined negative polarization branch with an inversion phase angle located around 24°–30°. In contrast, in the case of the olivine samples, the inversion angle is highly dependent on particle size and tends to decrease for larger sizes. We identify the macroscopic geometries as a possible explanation for the evident differences in the polarization curves between olivine and spinel millimeter samples. Although the polarization behaviour in near backscattering of the Barbara asteroid is similar to that of our spinel mm-sized sample in random orientation, this similarity could result in part from crystal retro-reflection rather than composition. This is part of an ongoing experimental project devoted to test separately several components of CV3-like meteorites, representative of the Barbarians composition, to disentangle their contributions to the polarization behaviour of these objects. © 2022 The Author(s). Published by Oxford University Press on behalf of Royal Astronomical Society., This work has been funded by the Spanish State Research Agency and Junta de Andalucía through grants LEONIDAS (RTI2018-095330-B-100) and P18-RT-1854, and the Center of Excellence Severo Ochoa award to the Instituto de Astrofísica de Andalucía (SEV-2017-0709). JC Gómez Martín and T Jardiel acknowledge financial support from the European Science Foundation (ESF) and the Ramón y Cajal Program of MICINN. Research by KM supported by the Academy of Finland grants No. 345115 and 336546., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-scattering properties of ellipsoidal dust aerosols constrained by measured dust shape distributions

  • Huang, Yue
  • Kok, Jasper F.
  • Saito, Masanori
  • Muñoz, Olga
Most global aerosol models approximate dust as spherical particles, whereas most remote sensing retrieval algorithms approximate dust as spheroidal particles with a shape distribution that conflicts with measurements. These inconsistent and inaccurate shape assumptions generate biases in dust single-scattering properties. Here, we obtain dust single-scattering properties by approximating dust as triaxial ellipsoidal particles with observationally constrained shape distributions. We find that, relative to the ellipsoidal dust optics obtained here, the spherical dust optics used in most aerosol models underestimate dust single-scattering albedo, mass extinction efficiency, and asymmetry parameter for almost all dust sizes in both the shortwave and longwave spectra. We further find that the ellipsoidal dust optics are in substantially better agreement with observations of the scattering matrix and linear depolarization ratio than the spheroidal dust optics used in most retrieval algorithms. However, relative to observations, the ellipsoidal dust optics overestimate the lidar ratio by underestimating the backscattering intensity by a factor of ∼2. This occurs largely because the computational method used to simulate ellipsoidal dust optics (i.e., the improved geometric optics method) underestimates the backscattering intensity by a factor of ∼2 relative to other computational methods (e.g., the physical geometric optics method). We conclude that the ellipsoidal dust optics with observationally constrained shape distributions can help improve global aerosol models and possibly remote sensing retrieval algorithms that do not use the backscattering signal. © Author(s) 2023., Yue Huang received support from the Columbia University Earth Institute Postdoctoral Research Fellowship (2021–2023 fellow) and NASA (grant no. 80NSSC19K1346), awarded under the Future Investigators in NASA Earth and Space Science and Technology (FINESST) program. Jasper F. Kok received support by the NSF (grant nos. 1552519 and 1856389) and the Army Research Office (grant no. W911NF-20-2-0150). Masanori Saito received support by the Texas A&M University internal fund (grant no. 02-132503-00006). Olga Muñoz received support by the Agencia Estatal de Investigación (grant nos. RTI2018-095330-B-100, P18-RT-1854, and SEV-2017-0709)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lofting of low-speed ejecta produced in the DART experiment and production of a dust cloud

  • Tancredi, Gonzalo
  • Liu, Po-Yen
  • Campo-Bagatin, Adriano
  • Moreno, Fernando
  • Domínguez, Bruno
NASA sent the Double Asteroid Redirection Test (DART) mission to impact Dimorphos, the satellite of the asteroid binary system (65803) Didymos. DART will release LICIACube prior to impact to obtain high-resolution post-impact images. The impact will produce a crater and a large amount of material ejected at high speed (several tens of m s−1), producing an ejecta cone that will quickly disperse. We analysed an additional effect: the lofting of material at low velocity due to the generation of seismic waves that propagate inside Dimorphos, producing surface shaking far from the impact point. We divide the process into different stages: from the generation of impact-induced waves, the interaction of them with surface particles, the ejection of dust particles at velocities, and the prediction of the observability of the dust coma and trail. We anticipate the following observable effects: (i) generation of a dust cloud that will produce a hazy appearance of Dimorphos’ surface, detectable by LICIACube; (ii) brightness increase of the binary system due to enhancement of the cross-section produced by the dust cloud; (iii) generation of a dust trail, similar to those observed in some Active Asteroids, which can last for several weeks after impact. Numerical prediction of the detectability of these effects depends on the amount and size distribution of ejected particles, which are largely unknown. In case these effects are observable, an inversion method can be applied to compute the amount of ejected material and its velocity distribution, and discuss the relevance of the shaking process. © 2022 The Author(s) Published by Oxford University Press on behalf of Royal Astronomical Society., GT and BD acknowledge financial support from project FCE-1-2019-1-156451 of the Agencia Nacional de Investigación e Innovación ANII (Uruguay). The ESyS simulations were run in the ClusterUY (Centro Nacional de Supercomputación de Uruguay; https://www.cluster.uy/). ACB and PYL acknowledge funding by the SU-SPACE-23-SEC-2019 EC-H2020 NEO-MAPP project (GA 870377). ACB also acknowledges funding by the Spanish Ministerio de Ciencia e Innovación RTI2018-099464-B-I00 project. FM acknowledges financial support from the State Agency for Research of the Spanish MCIU through the ‘Center of Excellence Severo Ochoa’ award to the Instituto de Astrofísica de Andalucía (SEV-2017-0709). FM also acknowledges financial support from the Spanish Plan Nacional de Astronomía y Astrofísica LEONIDAS project RTI2018-095330-B-100, and project P18-RT-1854 from Junta de Andalucía., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (SEV-2017-0709)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polarimetric imaging for the detection of synthetic models of SARS-CoV-2: A proof of concept

  • Gómez-González, Emilio
  • Muñoz, Olga
  • Gómez-Martín, Juan Carlos
  • Aceituno, Jesús
  • Fernández-Muñoz, Beatriz
  • Navas-García, José Manuel
  • Barriga-Rivera, Alejandro
  • Fernandez-Lizaranzu, Isabel
  • Muñoz-González, Francisco Javier
  • Parrilla Giráldez, Rubén
  • Requena-Lancharro, Desiree
  • Gil-Gamboa, Pedro
  • Ramos, José Luis
  • Rosell-Valle, Cristina
  • Gómez-González, Carmen
  • Martín-López, María
  • Relimpio-López, Isabel
  • Perales-Esteve, Manuel A.
  • Puppo-Moreno, Antonio
  • García-Cozar, Francisco José
  • Olvera-Collantes, Lucía
  • Santos-Trigo, Silvia de los
  • Gómez, Emilia
  • Sánchez-Pernaute, Rosario
  • Padillo-Ruíz, Javier
  • Márquez-Rivas, Javier
© 2023 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/), [Objective] To conduct a proof-of-concept study of the detection of two synthetic models of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) using polarimetric imaging., [Approach] Two SARS-CoV-2 models were prepared as engineered lentiviruses pseudotyped with the G protein of the vesicular stomatitis virus, and with the characteristic Spike protein of SARS-CoV-2. Samples were prepared in two biofluids (saline solution and artificial saliva), in four concentrations, and deposited as 5-µL droplets on a supporting plate. The angles of maximal degree of linear polarization (DLP) of light diffusely scattered from dry residues were determined using Mueller polarimetry from87 samples at 405 nm and 514 nm. A polarimetric camera was used for imaging several samples under 380–420 nm illumination at angles similar to those of maximal DLP. Per-pixel image analysis included quantification and combination of polarization feature descriptors in 475 samples., [Main results] The angles (from sample surface) of maximal DLP were 3° for 405 nm and 6° for 514 nm. Similar viral particles that differed only in the characteristic spike protein of the SARS-CoV-2, their corresponding negative controls, fluids, and the sample holder were discerned at 10-degree and 15-degree configurations., [Significance] Polarimetric imaging in the visible spectrum may help improve fast, non-contact detection and identification of viral particles, and/or other microbes such as tuberculosis, in multiple dry fluid samples simultaneously, particularly when combined with other imaging modalities. Further analysis including realistic concentrations of real SARS-CoV-2 viral particles in relevant human fluids is required. Polarimetric imaging under visible light may contribute to a fast, cost-effective screening of SARS-CoV-2 and other pathogens when combined with other imaging modalities., This study was funded by grants number COV20–00080 and COV20–00173 of the 2020 Emergency Call for Research Projects about the SARS-CoV-2 virus and the COVID-19 disease of the Institute of Health ‘Carlos III’, Spanish Ministry of Science and Innovation, and by grant number EQC2019–006240-P funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. ABR was supported by grant number RTI2018–094465-J-I00 funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The work of OM, JCGM, and JLR has been partially funded by grant LEONIDAS (RTI2018–095330-B-100), and the Center of Excellence Severo Ochoa award to the Instituto de Astrofísica de Andalucía (SEV-2017–0709). This work has been supported by the European Commission through the Joint Research Center (JRC) HUMAINT project., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polarimetric imaging for the detection of synthetic models of SARS-CoV-2: a proof of concept

  • Gomez-Gonzalez, Emilio
  • Gómez Gutiérrez, Emilia, 1975-
  • García-Cózar, Francisco J.
  • Marquez-Rivas, Javier
Includes supplementary materials for the online appendix., Objective. To conduct a proof-of-concept study of the detection of two synthetic models of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) using polarimetric imaging. Approach. Two SARS-CoV-2 models were prepared as engineered lentiviruses pseudotyped with the G protein of the vesicular stomatitis virus, and with the characteristic Spike protein of SARS-CoV-2. Samples were prepared in two biofluids (saline solution and artificial saliva), in four concentrations, and deposited as 5-µL droplets on a supporting plate. The angles of maximal degree of linear polarization (DLP) of light diffusely scattered from dry residues were determined using Mueller polarimetry from87 samples at 405 nm and 514 nm. A polarimetric camera was used for imaging several samples under 380–420 nm illumination at angles similar to those of maximal DLP. Per-pixel image analysis included quantification and combination of polarization feature descriptors in 475 samples. Main results. The angles (from sample surface) of maximal DLP were 3° for 405 nm and 6° for 514 nm. Similar viral particles that differed only in the characteristic spike protein of the SARS-CoV-2, their corresponding negative controls, fluids, and the sample holder were discerned at 10-degree and 15-degree configurations. Significance. Polarimetric imaging in the visible spectrum may help improve fast, non-contact detection and identification of viral particles, and/or other microbes such as tuberculosis, in multiple dry fluid samples simultaneously, particularly when combined with other imaging modalities. Further analysis including realistic concentrations of real SARS-CoV-2 viral particles in relevant human fluids is required. Polarimetric imaging under visible light may contribute to a fast, cost-effective screening of SARS-CoV-2 and other pathogens when combined with other imaging modalities., This study was funded by grants number COV20–00080 and COV20–00173 of the 2020 Emergency Call for Research Projects about the SARS-CoV-2 virus and the COVID-19 disease of the Institute of Health ‘Carlos III’, Spanish Ministry of Science and Innovation, and by grant number EQC2019–006240-P funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. ABR was supported by grant number RTI2018–094465-J-I00 funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The work of OM, JCGM, and JLR has been partially funded by grant LEONIDAS (RTI2018–095330-B-100), and the Center of Excellence Severo Ochoa award to the Instituto de Astrofísica de Andalucía (SEV-2017–0709). This work has been supported by the European Commission through the Joint Research Center (JRC) HUMAINT project. The authors would like to gratefully acknowledge the assistance of the members of the Explosive Ordnance Disposal – Chemical, Biological, Radiological & Nuclear (EOD-CBRN) Group of the Spanish National Police, whose identities cannot be disclosed, and who are represented here by JMNG. The authors would like to express their special gratitude to Emilio Gomez-Gonzalez, who sadly passed away in January 2023, and whose wisdom and willingness have been key in the development of this work and many other projects.