Pasar al contenido principal

EVALUACION DE CICLO DE VIDA DE ESTRUCTURAS DE PUENTES EXISTENTES UTILIZANDO DATOS MULTIESCALA Y MULTIFUENTES

RTI2018-095893-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Assessing rebar corrosion through the combination of nondestructive GPR and IRT methodologies

  • Solla Carracelas, Maria Mercedes
  • Lagüela López, Susana
  • Fernández, Norberto
  • Garrido González, Iván
Corrosion is one of the pathologies that most affects the resistance of reinforced concrete. There are numerous ancient structures still in use affected by corrosion that need proper evaluation and remedial treatment for their maintenance. In this sense, there has been an increasing tendency to use nondestructive testing techniques that do not alter the reinforcement elements of such vulnerable structures. This work presents a combined methodology by using ground penetrating radar (GPR) and infrared thermography (IRT) techniques for the detection and evaluation of corrosion. The methodology was applied to the case study of an old construction that belongs to the abandoned military battery of Cabo Udra (Galicia, Spain). The combination of these complementary techniques allowed for the identification of areas with different dielectric and thermal conductivity, as well as different reflection patterns and intensity of the GPR waves. Thus, from the analysis of the GPR signals and IRT images acquired, it was possible to interpret corroded areas and moisture, along with inner damages such as cracking and debonding. These pathologies have a direct effect on the durability and sustentation of a structure, while the knowledge of their existence might be useful for engineers engaged in the design of maintenance works., Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, Universidad de Salamanca. Cátedra Iberdrola VIII Centenario
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

3D point cloud data processing and infrastructure information models: methods and findings from safeway project

  • Soilán Rodríguez, Mario
  • Justo Dominguez, Andrés
  • Sánchez Rodríguez, Ana
  • Lamas Novoa, Daniel
  • Riveiro Rodríguez, Belén
Monitoring and digitalization are key to improve the resilience of the infrastructure network in the context of assessing its disaster management cycle. SAFEWAY is a project funded by the H2020 framework that aims to assess infrastructure resilience integrating multiscale information attending to all modes of disaster management cycle. This work presents the methodologies developed in the project for road and rail infrastructure monitoring and modelling, using remotely sensed data from Mobile Mapping Systems (MMS). First, 3D point clouds of both road and rail infrastructure are heuristically processed, obtaining geometric and semantic information from the most relevant assets, as well as the alignment, which is a key entity for generating information models. Such models are computed following the specifications of the Industry Foundation Classes (IFC) 4.1 schema, considering its current limitations and future potential for linear infrastructure modelling. Finally, the information is centralized in a core software platform where a user interface has been developed to aid visualization and interpretation of the resulting data., Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, Agencia Estatal de Investigación | Ref. FJC2018-035550-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A case study of measurements of deformations due to different loads in pieces less than 1 m from lidar data

  • Cabaleiro Núñez, Manuel
  • Riveiro Rodríguez, Belén
  • Conde Carnero, Borja
  • Sánchez Rodríguez, Ana
Point clouds obtained by laser scanning or photogrammetry have emerged as a source of data with great potential for the measurement of deformations in structures and construction. Deformations is not only relevant in structures and buildings, but also in small (>1 m) metallic pieces subjected to loads. The aim of this work is to propose a methodology, and develop the corresponding algorithms, that allow measuring the deformation produced in pieces subjected to two different loads, using point cloud data collected with LiDAR technology and different reference system. The methodology developed has been tested with a deformed piece with different loads in the laboratory. The results obtained with errors less than a ±0.020 mm demonstrated the validity of the proposed methodology., Xunta de Galicia | Ref. ED431C2016-038, Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Fully automated methodology for the delineation of railway lanes and the generation of IFC alignment models using 3D point cloud data

  • Soilán Rodríguez, Mario
  • Novoa Martínez, Andrea
  • Sánchez Rodríguez, Ana
  • Justo Dominguez, Andrés
  • Riveiro Rodríguez, Belén
This work presents a fully automated methodology that, in a first step, is able to reliably extract and delineate the position and geometry of the rails from three-dimensional (3D) point cloud data of railway infrastructure by sequentially applying heuristic-based point cloud processing steps, namely railway track segmentation, rough rail estimation, and rail extraction. Then, that information is used to generate the alignment of the surveyed railway lane following the requirements of the Industry Foundation Classes (IFC) Alignment standard. Finally, the proposed method exports an IFC-compliant file that describes the position of the rails with respect to the railway lane alignment. This method has been applied to a 90-km long railway lane, and validated on two one-kilometer subsections of the case study data, obtaining an average rail delineation error of less than 3 cm. Furthermore, the track gauge was measured using the rail alignment data, obtaining errors of a similar magnitude., Ministerio de Ciencia e Innovación | Ref. FJC2018-035550-I, Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Two-dimensional models of variable inertia from LiDAR data for structural analysis of timber trusses

  • Hermida, J
  • Cabaleiro Núñez, Manuel
  • Riveiro Rodríguez, Belén
  • Caamaño Martínez, José Carlos
Historical wooden structures often present numerous irregularities and changes of section along the longitudinal axis of the beams that compose them. For this reason, in order to carry out a structural analysis, the creation of models that take into account the variation in the moment of inertia presented by each beam of the structure is fundamental. This geometrical characteristic is especially important in structures of timber beams and trusses when the loads are located out of the nodes. To achieve this aim, this work presents an algorithm that makes it possible to automatically carry out 2D models of variable inertia for the analysis of structures of beams from LiDAR data. The proposed methodology is based on the creation of beam elements of variable inertia, where the geometrical properties of each section of each beam and the general geometry of the structure are considered. The results obtained are very promising, presenting relative errors in the deformation analysis lower than 8% compared to other methods of classical modelling and a reduction of the processing time by more than 85%., Xunta de Galicia | Ref. ED431C2016‐ 038, Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

IRT and GPR techniques for moisture detection and characterisation in buildings

  • Garrido González, Iván
  • Solla Carracelas, Maria Mercedes
  • Lagüela López, Susana
  • Fernández, Norberto
The integrity, comfort, and energy demand of a building can be negatively affected by the presence of moisture in its walls. Therefore, it is essential to identify and characterise this building pathology with the most appropriate technologies to perform the required prevention and maintenance tasks. This paper proposes the joint application of InfraRed Thermography (IRT) and Ground-Penetrating Radar (GPR) for the detection and classification of moisture in interior walls of a building according to its severity level. The IRT method is based on the study of the temperature distribution of the thermal images acquired without an application of artificial thermal excitation for the detection of superficial moisture (less than 15 mm deep in plaster with passive IRT). Additionally, in order to characterise the level of moisture severity, the Evaporative Thermal Index (ETI) was obtained for each of the moisture areas. As for GPR, with measuring capacity from 10 mm up to 30 cm depth with a 2300 MHz antenna, several algorithms were developed based on the amplitude and spectrum of the received signals for the detection and classification of moisture through the inner layers of the wall. In this work, the complementarity of both methods has proven to be an effective approach to investigate both superficial and internal moisture and their severity. Specifically, IRT allowed estimating superficial water movement, whereas GPR allowed detecting points of internal water accumulation. Thus, through the combination of both techniques, it was possible to provide an interpretation of the water displacement from the exterior surface to the interior surface of the wall, and to give a relative depth of water inside the wall. Therefore, it was concluded that more information and greater reliability can be gained by using complementary IRT-GPR, showing the benefits of combining both techniques in the building sector., AEI/FEDER, UE | Ref. TEC2016-76021-C2-2-R, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/03950, Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, Universidad de Salamanca. Cátedra Iberdrola VIII Centenario
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Use of polar coordinates for improving the measurement of resistant cross-sections of existing timber elements combining laser scanner and drilling resistance tests

  • Abraldes, Pablo
  • Cabaleiro Núñez, Manuel
  • Sousa, Hélder S.
  • Branco, Jorge M.
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Historic timber structures typically have elements with irregular cross-sections often with decayed segments, making of extreme importance to have proper methods to obtain the resistant cross-section. Knowing as accurately as possible the measurements of the resistant section of these beams is fundamental for the structural safety analysis. Small changes on the size and geometry of the resistant cross-section may be fundamental in an intervention decision process. In this work an algorithm was created that allows to obtain the geometry of the resistant section of existing timber beams by use of data obtained by laser scanning of the external apparent sections combined with drilling resistance tests. The algorithm is based on polar coordinates and proved to obtain more reliable resistant cross-sections than those obtained solely by common practice using drilling resistant tests. The developed algorithm was calibrated with a laboratory beam and subsequently applied and validated in a case study., Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, Fundação para a Ciência e a Tecnologia | Ref. UIDB / 04029/2020
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic identification and geometrical modeling of steel rivets of historical structures from Lidar data

  • Pereira, Álvaro
  • Cabaleiro Núñez, Manuel
  • Conde Carnero, Borja
  • Sánchez Rodríguez, Ana
Riveting is a joining technique that was widely used in iron and steel structures from the mid-nineteenth to the early twentieth century. Nowadays, many of these riveted structures are still in service around the world, and in many instances, also constitute an important part of the built cultural heritage. The maintenance and conservation of this type of construction is a crucial task for which the HBIM (Historic Building Information Modeling) methodology has recently gained increased attention, postulating itself as the ideal tool for tracking control and conservation-related actions. In the process of data collection and 3D modeling of the structure, the rivets are an important part to be taken into account in the structural safety assessment and health monitoring over time. Any structure of this typology typically presents thousands of rivets, so its measurement and subsequent 3D geometrical modeling is a laborious task and a source of possible errors. Accordingly, this work presents a novel methodology that allows the automatic identification and 3D modeling of rivets in iron and steel structures from Lidar data. The proposed methodology has been tested with both laboratory specimens and a full-scale real bridge., European Commission | Ref. n. 769255, Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-095893-B-C21, Ministerio de Ciencia, Innovación y Universidades | Ref. FJC2018-035550-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Contribución de congreso (ConferenceOutput)

Large-scale monitoring of terrestrial infrastructure to anticipate extreme events using SAR interferometry

  • Rodriguez Antuñano, Ignacio
  • Riveiro Rodríguez, Belén
  • Martínez Sánchez, Joaquín
  • Soilán Rodríguez, Mario
This paper focuses on the potential of satellite data to provide a large-scale structural monitoring method that can contribute to predict the occurrence of extreme events triggered by natural or even human-made factors. The concept is based on exploring Interferometric SAR (InSAR) techniques to detect subtle deformations of critical assets of the transport network, using images collected by the Sentinel-1 mission of the EU Copernicus Programme. Multi-temporal InSAR technique is proposed for the analysis of time series of available images since 2014 to 2020. The methodology is tested in the region of Lisboa to Cascais (Portugal), where a large-scale monitoring is required to evaluate the resilience of that coastal area to future extreme events related to flooding. The methodology shows the reliability of the StaMPS-PSI method for monitoring infrastructures through time series if a large amount of data is used. In this sense, the data offered by Sentinel-1 is of great value for monitoring thanks to its free and open access., Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, Interreg España-Portugal | Ref. EAPA_826/2018
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic detection of surface damage in round brick chimneys by finite plane modelling from terrestrial laser scanning point clouds. Case study of Bragança Dukes’ Palace, Guimarães, Portugal

  • Balado Frías, Jesús
  • Díaz Vilariño, Lucía
  • Azenha, Miguel
  • Lourenço, Paulo B.
Chimneys are architectural elements of difficult access and analysis in heritage buildings. This paper presents a method for automatic modelling of round brick chimneys and analysing their inclination, straightness and surface. The method uses as input data point clouds acquired with a Terrestrial Laser Scanner. Four chimneys have been surveyed on the north face of Bragança Dukes’ Palace in Guimarães, Portugal. The method consists of two main processes. First, the point cloud of each chimney is segmented into circumferential sections and adjusted to cylinders by applying Maximum Likelihood Sample Consensus. From the set of centroids, the inclination and the straightness of the chimney is estimated. Second, the point cloud chimney is segmented longitudinally and adjusted to finite planes. The distance estimation between the input point cloud and the modelled planes allows detecting the lack of bricks or mortar erosions. The proposed method allows estimating characteristics in chimneys even if the chimneys have not been completely acquired., Xunta de Galicia | Ref. ED481D 2019/020, Xunta de Galicia | Ref. ED481B 2019/061, Xunta de Galicia | Ref. ED431C 2016- 038, Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, Fundação para a Ciência e a Tecnologia | Ref. UIDB/04029/2020
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Transfer learning for indoor object classification: from images to point clouds

  • Balado Frías, Jesús
  • Díaz Vilariño, Lucía
  • Verbree, Edward
  • Arias Sánchez, Pedro
Indoor furniture is of great relevance to building occupants in everyday life. Furniture occupies space in the building, gives comfort, establishes order in rooms and locates services and activities. Furniture is not always static; the rooms can be reorganized according to the needs. Keeping the building models up to date with the current furniture is key to work with indoor environments. Laser scanning technology can acquire indoor environments in a fast and precise way, and recent artificial intelligence techniques can classify correctly the objects that contain. The objective of this work is to study how to minimize the use of point cloud samples in Neural Network training, tedious to label, and replace them with images obtained from online sources. For this, point clouds are converted to images by means of rotations and projections. The conversion of a 3D vector data to a 2D raster allows the use of Convolutional Neural Networks, the achievement of several images for each acquired point cloud object and the combination with images obtained from online sources, such as Google Images. The images have been distributed among the validation and testing training sets following different percentages. The results show that, although point cloud images cannot be completely dispensed within the training set, only 10% of these achieve high accuracy in the classification, Xunta de Galicia | Ref. ED481B-2019-061, Xunta de Galicia | Ref. ED481D 2019/020, Xunta de Galicia | Ref. ED431C 2016-038, Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Disturbance analysis in the classification of objects obtained from urban LiDAR point clouds with convolutional neural networks

  • Balado Frías, Jesús
  • Arias Sánchez, Pedro
  • Lorenzo Cimadevila, Henrique Remixio
  • Meijide Rodríguez, Adrián
Mobile Laser Scanning (MLS) systems have proven their usefulness in the rapid and accurate acquisition of the urban environment. From the generated point clouds, street furniture can be extracted and classified without manual intervention. However, this process of acquisition and classification is not error-free, caused mainly by disturbances. This paper analyses the effect of three disturbances (point density variation, ambient noise, and occlusions) on the classification of urban objects in point clouds. From point clouds acquired in real case studies, synthetic disturbances are generated and added. The point density reduction is generated by downsampling in a voxel-wise distribution. The ambient noise is generated as random points within the bounding box of the object, and the occlusion is generated by eliminating points contained in a sphere. Samples with disturbances are classified by a pre-trained Convolutional Neural Network (CNN). The results showed different behaviours for each disturbance: density reduction affected objects depending on the object shape and dimensions, ambient noise depending on the volume of the object, while occlusions depended on their size and location. Finally, the CNN was re-trained with a percentage of synthetic samples with disturbances. An improvement in the performance of 10–40% was reported except for occlusions with a radius larger than 1 m., Xunta de Galicia | Ref. ED431C 2016-038, Xunta de Galicia | Ref. ED481B-2019-061, Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-095893-B-C21, Ministerio de Ciencia, Innovación y Universidades | Ref. PID2019-105221RB-C43/AEI/10.13039/501100011033, Horizon 2020 Framework Programme | Ref. 769255
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Ground penetrating radar applied to monumental stone conservation: application to the rock necropolis of San Vítor de Barxacova in NW Spain

  • Solla Carracelas, Maria Mercedes
  • Buceta Bruneti, Gonzalo
  • Elseicy , Ahmed Mossad Ibrahim
  • Nieto Muñiz, Eduardo Breogán
This paper deals with the application of the Ground Penetrating Radar (GPR) method in the assessment of stone monuments. Compilation of published works and a discussion of their main findings are first addressed. Next, to show the potential of the method, a case study is presented aiming to assess the state of conservation of the rock necropolis of San Vítor de Barxacova (Ourense, Spain) consisting of 56 anthropomorphic graves carved into the natural rock. Fieldwork was carried out using a GPR system equipped with a 2.3 GHz central frequency antenna. The main goal of this study is to provide an effective approach for the detection and localization of internal damages such as fractures and voids. New amplitude-based 2D and 3D imaging strategies are presented aiming to improve damage detection. A new approach was also developed to digitize the extracted information into a point cloud format, thus improving the possibilities for 3D visualization with the surrounding environment. Although a total of 39 graves were surveyed, only 13 graves are included in this paper due to their singularity and relevant results. The potential of using GPR tests for the assessment of the conservation state of monumental stone structures is also discussed., Xunta de Galicia | Ref. ED431F 2021/08, Ministerio de Ciencia e Innovación | Ref. RYC2019-026604-I, Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic detection and characterization of ground occlusions in urban point clouds from mobile laser scanning data

  • Balado Frías, Jesús
  • González Rodríguez, Maria Elena
  • Verbree, E.
  • Díaz Vilariño, Lucía
  • Lorenzo Cimadevila, Henrique Remixio
Occlusions accompany serious problems that reduce the applicability of numerous algorithms. The aim of this work is to detect and characterize urban ground gaps based on occluding object. The point clouds for input have been acquired with Mobile Laser Scanning and have been previously segmented into ground, buildings and objects, which have been classified. The method generates various raster images according to segmented point cloud elements, and detects gaps within the ground based on their connectivity and the application of the hit-or-miss transform. The method has been tested in four real case studies in the cities of Vigo and Paris, and an accuracy of 99.6% has been obtained in occlusion detection and labelling. Cars caused 80.6% of the occlusions. Each car occluded an average ground area of 11.9 m2. The proposed method facilitates knowing the percentage of occluded ground, and if this would be reduced in successive multi-temporal acquisitions based on mobility characteristics of each object class., Xunta de Galicia | Ref. ED481B-2019-061, Xunta de Galicia | Ref. ED481D 2019/020, Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, Agencia Estatal de Investigación | Ref. PID2019-05221RB-C43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Review of laser scanning technologies and their applications for road and railway infrastructure monitoring

  • Soilán Rodríguez, Mario
  • Sánchez Rodríguez, Ana
  • Del Rio Barral, Pablo
  • Perez Collazo, Carlos
  • Arias Sánchez, Pedro
  • Riveiro Rodríguez, Belén
Improving the resilience of infrastructures is key to reduce their risk vulnerability and mitigate impact from hazards at different levels (e.g., from increasing extreme events, driven by climate change); or from human-made events such as: accidents, vandalism or terrorist actions. One of the most relevant aspects of resilience is preparation. This is directly related to: (i) the risk prediction capability; (ii) the infrastructure monitoring; and (iii) the systems contributing to anticipate, prevent and prepare the infrastructure for potential damage. This work focuses on those methods and technologies that contribute to more efficient and automated infrastructure monitoring. Therefore, a review that summarizes the state of the art of LiDAR (Light Detection And Ranging)-based data processing is presented, giving a special emphasis to road and railway infrastructure. The most relevant applications related to monitoring and inventory transport infrastructures are discussed. Furthermore, different commercial LiDAR-based terrestrial systems are described and compared to offer a broad scope of the available sensors and tools to remote monitoring infrastructures based on terrestrial systems., Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Structural health control of historical steel structures using HBIM

  • Bouzas Rodriguez, Óscar
  • Cabaleiro Núñez, Manuel
  • Conde Carnero, Borja
  • Cruz, Yago
  • Riveiro Rodríguez, Belén
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, In architecture and civil engineering, maintaining historical constructions is essential for preserving cultural heritage. This is especially relevant in constructions exposed to a high degree of degradation, such as historic steel structures. The HBIM (Heritage Building Information Modeling) technology can facilitate and automate this task. In this paper, a methodology based on an HBIM framework is proposed and applied, which allows the control and monitoring of structural health over time. On the one hand, an architectural model of the construction is created. This model collects, in detail, aspects such as the geometrical shape, material composition, structural configuration, and additional data required for the control and management of the construction. On the other hand, a calibrated structural model is also automatically generated. This model represents the actual overall mechanical behavior of the construction. Both models are seamlessly integrated, evolve, and collect data of all the different control or maintenance phases of the construction. The methodology has been validated in the case study of the riveted steel bridge of O Barqueiro, located in Galicia, Spain., Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, European Regional Development Fund (ERDF) | Ref. EAPA_826/2018
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Scan-to-BIM for the infrastructure domain: generation of IFC-complaint models of road infrastructure assets and semantics using 3D point cloud data

  • Justo Dominguez, Andrés
  • Soilán Rodríguez, Mario
  • Sánchez Rodríguez, Ana
  • Riveiro Rodríguez, Belén
The development of the IFC 4.3 candidate standard sets the pathway for interoperability amongst different infrastructures that have been harmonized under the buildingSMART project proposals. Furthermore, the use of laser scanning as a tool for the monitoring of infrastructures has also been rising. This paper showcases a combination of BIM and remote sensing for infrastructure in a road scenario. A semi-automatic approach is presented for the IFC 4.1 compliant modelling of traffic signs and guardrails, along with the inclusion of some semantics via property sets. The input data for the IFC modelling procedure is obtained from the automatic processing of a 3D point cloud, that extracts road alignment, traffic signs, and guardrails, and from standardized dimensions for certain assets. The point cloud processing is validated for the guardrail identification and the IFC modelling is described alongside an UML, exemplifying the possibility of modelling the as-is state of the road infrastructure., Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-095893-B-C21, Ministerio de Ciencia e Innovación | Ref. FJC2018-035550-I, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Semantic segmentation of major macroalgae in coastal environments using high-resolution ground imagery and deep learning

  • Balado Frías, Jesús
  • Olabarría Uzquiano, Celia
  • Martínez Sánchez, Joaquín
  • Rodríguez Pérez, José R.
  • Arias Sánchez, Pedro
Macroalgae are a fundamental component of coastal ecosystems and play a key role in shaping community structure and functioning. Macroalgae are currently threatened by diverse stressors, particularly climate change and invasive species, but they do not all respond in the same way to the stressors. Effective methods of collecting qualitative and quantitative information are essential to enable better, more efficient management of macroalgae. Acquisition of high-resolution images, in which macroalgae can be distinguished on the basis of their texture and colour, and the automated processing of these images are thus essential. Although ground images are useful, labelling is tedious. This study focuses on the semantic segmentation of five macroalgal species in high-resolution ground images taken in 0.5 × 0.5 m quadrats placed along an intertidal rocky shore at low tide. The target species, Bifurcaria bifurcata, Cystoseira tamariscifolia, Sargassum muticum, Sacchoriza polyschides and Codium spp., which predominate on intertidal shores, belong to different morpho-functional groups. An explanation of how to convert vector-labelled data to raster-labelled data for adaptation to Convolutional Neural Network (CNN) input is provided. Three CNNs (MobileNetV2, Resnet18, Xception) were compared, and ResNet18 yielded the highest accuracy (91.9%). The macroalgae were correctly segmented, and the main confusion occurred at the borders between different macroalgal species, a problem derived from labelling errors. In addition, the interior and exterior of the quadrats were correctly delimited by the CNNs. The results were obtained from only one hundred labelled images and the method can be performed on personal computers, without the need to use external servers. The proposed method helps automation of the labelling process., Fundación Biodiversidad, Ministerio para la Transición Ecológica y el Reto Demográfico, European Maritime and Fisheries Fund (EMFF), Xunta de Galicia | Ref. ED431C 2016-038, Xunta de Galicia | Ref. ED481B-2019-061, Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-095893-B-C21
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Apparent and resistant section parametric modelling of timber structures in HBIM

  • Santos, David
  • Cabaleiro Núñez, Manuel
  • Sousa, Hélder S.
  • Branco, Jorge M.
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Historic timber structures are frequently composed by elements with irregular sections. Moreover, due to abiotic and biotic agent action, wood is especially vulnerable to decay, which can lead to destruction of external layers of the element. Due to this, a beam's resistant cross-section, which is the healthy section part that supports the structure, and the beam external apparent cross-section may not coincide. This can lead to an improper structural assessment regarding the load-capacity of that element. HBIM technology is currently being used for the representation and analysis of historic timber constructions' structural health. In this work, a methodology is proposed and applied that, based on the combination of LIDAR data with non-destructive tests, allows to obtain a single 3D HBIM model of decayed irregular wooden structures. This HBIM model contains both the apparent parametric model, that represents the structure external geometry and collects all necessary data for construction's conservation analysis, and also a parametric resistant model, that represents the beam's undamaged section, allowing to carry out a more accurate structural analysis. In this work, the methodology was first applied to an irregular and decayed beam at laboratory conditions for framework calibration, and then applied to a case study for validation. With respect to the storage space, the volume difference between the rendered models and the proposed parametric models was on average 3.2%, whereas the occupied memory space was 10 times lower in the parametric models. The case study was the Guimarães chamber roof (Portugal) which structure is made up of several truss systems composed by irregular beams, several of which with signs of past decay activity., Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, European Regional Development Fund (ERDF) | Ref. EAPA_826/2018, Fundação para a Ciência e a Tecnologia | Ref. UIDB/04029/2020
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Generation and enrichment of pedestrian maps with vertical shadows in urban environments from mobile laser scanning data

  • Balado Frías, Jesús
  • Díaz Vilariño, Lucía
  • Frías Nores, Ernesto
  • González Rodríguez, Maria Elena
Cities are becoming more pedestrian-friendly, reducing traffic and promoting physical activity and walking. However, prolonged exposure to the sun can cause sunburn and skin problems, so minimizing exposure to the sun while travelling is especially relevant at certain latitudes and in the summer months. This paper proposes a method for modelling urban contours and generating pedestrian maps with the location of shaded areas and accessibility barriers. The proposed method uses as input data a point cloud of an urban environment acquired with Mobile Laser Scanning. First, the input point cloud is segmented in ground points, obstacle points, and points causing shadows. Then, the three segmented point clouds are rasterized and the corresponded images are combined to obtain the navigable ground and the shaded areas. Finally, from the navigable ground, a navigation map is generated for pedestrians. To check the usefulness of this navigation map, a pathfinding algorithm is applied. The results show a correct generation of the navigable ground, and routes prioritizing the trajectory by shadow areas. Depending on the weighting between sun and shaded areas, the routes obtained show differences in distance travelled and sun exposure. The proposed method is sensitive to the existence of obstacles and noise in the point clouds., Xunta de Galicia | Ref. ED481B-2019-061, Xunta de Galicia | Ref. ED481D 2019/020, Xunta de Galicia | Ref. ED431C 2016- 038, Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, Agencia Estatal de Investigación | Ref. PID2019- 105221RB-C43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Contribución de congreso (ConferenceOutput)

Obtaining of variable geometry beam models for steel beams with corrosion

  • Rúa Fernández, Erik
  • Cabaleiro Núñez, Manuel
  • Conde Carnero, Borja
  • Riveiro Rodríguez, Belén
The most common pathology that causes the main maintenance and durability problems in steel structures is corrosion, since it causes the loss of material from the beams that form the structure, diminishing its properties and therefore the general resistance of the structure. After cleaning the corrosion on a beam, its surface becomes very irregular and it is very difficult to measure and extract the geometry of these shapes and surfaces manually. To this end, laser scanning and its subsequent point cloud is a promising method. The objective of this work is to show how obtaining beam models with extruded slices of one beam affected by corrosion for subsequent analysis structural from the laser scanning. The proposed steps were applied and validated in laboratory study cases., Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, European Regional Development Fund (ERDF) | Ref. EAPA_826/2018
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Analytical model for the fatigue analysis of steel joints by clamps according to the lever length

  • Cabaleiro Núñez, Manuel
  • Comesaña Piñeiro, Rafael
  • González Gaya, Cristina
  • Caamaño Martinez, Jose Carlos
Among the most commonly used materials in the construction of structures in the last two centuries are iron and steel. Clamp joints are a suitable type of joint when it is necessary to rehabilitate or modify a historical steel structure for new uses, reinforcing or modifying it with new beams, without the need to drill or weld on the original structure. The clamps allow beams to be joined with a flange (such as I-beams) without the need for any prior operation on the beams and allow the manufacture of completely removable and reconfigurable structures. Developing and analysing this type of fully removable and reconfigurable structure is necessary. To date, no studies have been carried out on the fatigue behaviour of steel joints by clamps, especially taking into account their main geometric characteristics, such as the size of the clamp levers. In this work, an analytical model is proposed that allows for the analysis of the number of cycles and the fatigue limit of clamp joints as a function of the size of the clamp levers. In addition, various fatigue tests are performed with different clamp sizes. The experimental results are compared with those obtained with the proposed methodology. Finally, the relationships between the lever length and the fatigue behaviour of the clamp joints have been determined. It is concluded that an increase in the size of the front lever is associated to a decrease in the fatigue limit. On the contrary, if the size of the rear lever is increased, the fatigue limit of the joint increases. In general, according to the obtained results, the resistance of the joint can be reduced to approximately one third when it is subjected to fatigue loads., Ministerio de Ciencia, Innovación | Ref. RTI2018-095893-B-C21, European Commission | Ref. H2020, n. 769255
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic point cloud semantic segmentation of complex railway environments

  • Lamas Novoa, Daniel
  • Soilán Rodríguez, Mario
  • Grandio Gonzalez, Javier
  • Riveiro Rodríguez, Belén
The growing development of data digitalisation methods has increased their demand and applications in the transportation infrastructure field. Currently, mobile mapping systems (MMSs) are one of the most popular technologies for the acquisition of infrastructure data, with three-dimensional (3D) point clouds as their main product. In this work, a heuristic-based workflow for semantic segmentation of complex railway environments is presented, in which their most relevant elements are classified, namely, rails, masts, wiring, droppers, traffic lights, and signals. This method takes advantage of existing methodologies in the field for point cloud processing and segmentation, taking into account the geometry and spatial context of each classified element in the railway environment. This method is applied to a 90-kilometre-long railway lane and validated against a manual reference on random sections of the case study data. The results are presented and discussed at the object level, differentiating the type of the element. The indicators F1 scores obtained for each element are superior to 85%, being higher than 99% in rails, the most significant element of the infrastructure. These metrics showcase the quality of the algorithm, which proves that this method is efficient for the classification of long and variable railway sections, and for the assisted labelling of point cloud data for future applications based on training supervised learning models., Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, Agencia Estatal de Investigación | Ref. FJC2018-035550-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A holistic methodology for the non-destructive experimental characterization and reliability-based structural assessment of historical steel bridges

  • Bouzas Rodriguez, Óscar
  • Conde Carnero, Borja
  • Cabaleiro Núñez, Manuel
  • Riveiro Rodríguez, Belén
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Nowadays, several historical steel structures present damage and an advanced deterioration state induced by human or natural actions, causing fluctuations in geometrical, physical, and mechanical properties that dramatically affect their mechanical behavior. Due to the economic, cultural, and heritage value, these constructions must be comprehensively assessed to verify their current condition state. This work presents a holistic methodology aimed at the non-destructive experimental characterization and reliability-based structural assessment of historical steel bridges. It comprehends from the experimental data acquisition to the finite element model updating and the probabilistic-based structural assessment to obtain the reliability indexes of serviceability and ultimate limit states. Several sources of information are considered in the evaluation process, thus, results are more realistic and accurate and can be used for optimal decision-making related to maintenance and retrofitting actions. The feasibility of the methodology has been tested on O Barqueiro Bridge, an aging riveted bridge located in Galicia, Spain. The study first involved a comprehensive experimental campaign to characterize the bridge effectively at multiple levels: geometry, material, and structural system by the synergetic combination of different tools and methods: in-depth visual inspection, terrestrial laser scanner survey, ultrasonic testing, and ambient vibration test. Subsequently, a detailed FE model was developed and calibrated with an average relative error in frequencies of 2.04% and an average MAC value of 0.94. Finally, the reliability-based structural assessment was performed, yielding reliability indexes of 1.80 and 1.99 for the serviceability and ultimate limit states, respectively. Thus, the bridge could not withstand traffic loads with satisfactory structural performance in its current condition., Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-095893-B-C21, European Regional Development Fund | Ref. EAPA_826/2018
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

First results of a methodology to obtain a 1D variable geometry model for the structural analysis of corroded steel beams from the point cloud

  • Rúa Fernández, Erik
  • Cabaleiro Núñez, Manuel
  • Conde Carnero, Borja
  • Riveiro Rodríguez, Belén
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Corrosion is the most common pathology suffered by steel structures and is the main problem for their maintenance and durability. In steel elements, corrosion causes a loss of material and, as a consequence, a decrease in the stiffness and strength of the structure. Determining the resistant geometry of a corroded steel profile by manual techniques is very difficult because, after cleaning the corrosion, the surface is usually irregular. For the measurement and extraction of these types of irregular shapes or surfaces, the point cloud is currently one of the most effective methods. This work aims to apply a methodology that allows the efficient modeling of corroded steel profiles by means of beam elements for their subsequent numerical analysis within a FEM simulation framework. The proposed methodology has been revealed to be more efficient than current techniques based on the 3D solid modeling since it allows a significant reduction in both the model size and the computing time. The methodology has been applied and validated in two different laboratory case studies, Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-095893-B-C21, European Regional Development Fund | Ref. EAPA_826 / 2018
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Point cloud room segmentation based on indoor spaces and 3D mathematical morphology

  • Frías Nores, Ernesto
  • Balado Frías, Jesús
  • Díaz Vilariño, Lucía
  • Lorenzo Cimadevila, Henrique Remixio
Room segmentation is a matter of ongoing interesting for indoor navigation and reconstruction in robotics and AEC. While in robotics field, the problem room segmentation has been typically addressed on 2D floorplan, interest in enrichment 3D models providing more detailed representation of indoors has been growing in the AEC. Point clouds make available more realistic and update but room segmentation from point clouds is still a challenging topic. This work presents a method to carried out point cloud segmentation into rooms based on 3D mathematical morphological operations. First, the input point cloud is voxelized and indoor empty voxels are extracted by CropHull algorithm. Then, a morphological erosion is performed on the 3D image of indoor empty voxels in order to break connectivity between voxels belonging to adjacent rooms. Remaining voxels after erosion are clustered by a 3D connected components algorithm so that each room is individualized. Room morphology is retrieved by individual 3D morphological dilation on clustered voxels. Finally, unlabelled occupied voxels are classified according proximity to labelled empty voxels after dilation operation. The method was tested in two real cases and segmentation performance was evaluated with encouraging results., Xunta de Galicia | Ref. ED481B-2019-061, Xunta de Galicia | Ref. ED481D 2019/020, Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, Agencia Estatal de Investigación | Ref. PID2019-105221RB-C43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Analysis of stiffness of clamped joints versus bolted joints in steel structures by means of accelerometers and shaking table tests

  • Cabaleiro Núñez, Manuel
  • Moutinho, Carlos
  • González Gaya, Cristina
  • Caetano, Elsa
  • Rosales Prieto, Victor Francisco
This work analyzes the difference in stiffness in a steel laboratory structure using clamped joints or bolted joints and analyzes if the stiffness varies in the same way when the frame is subjected to external dynamic loads that bring the joint materials to their yield strength. To make this comparison, the differences between clamp joint and bolted joint were evaluated using a novel methodology based on the analysis of the structure’s natural frequencies from accelerometers. To perform this comparison, several laboratory tests were carried out on a frame made by clamped joints and the same frame made by bolted joints, using a set of tests on a medium-scale shake table for this purpose. The results achieved have verified the methodology used as adequate., Agencia Estatal de Investigación | Ref. RTI2018-095893-B-C21, Ministerio de Ciencia, Innovación y Universidades | Ref. CAS19/00119, Universidad Nacional de Educación a Distancia | Ref. 2021/ICF01, Fundação para a Ciência e a Tecnologia | Ref. UID/ECI/04708/2019
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Transfer Learning in urban object classification: online images to recognize point clouds