Pasar al contenido principal

PREVENCION EN EL SISTEMA DE NAVEGACION GALILEO DE LA AVALANCHA ELECTRONICA EN EQUIPOS DE RADIOFRECUENCIA DE ALTA POTENCIA

RTI2018-095903-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic secondary electron emission in rough composite materials

  • Olano, Leandro
  • Dávila, M. E.
  • Dennison, J. R.
  • Martín-Iglesias, P.
  • Montero, Isabel
[EN] The interaction of ionizing radiation with matter is of critical importance in numerous areas of science and technology like space and vacuum technology and even medicine and biotechnology. Secondary electron emission is a consequence of electron irradiation on materials. We achieve extremely low secondary electron emission yield values smaller than 0.2, even up to incident electron energies ~1 keV, due to an undocumented synergy between neighbouring metal and dielectric domains in composite samples. To investigate this experimental discovery, we propose a simple 3D model where the dielectric and metallic domains are arranged in parallel and interleaved. The proposed surface profile has a triangular shape to model the surface roughness. We obtain a continuous equation to describe the electric field that arises between grounded conductors and charged dielectrics domains. The calculated trajectories of secondary electrons in this 3D geometry are used to predict dynamic secondary emission yield, which strongly depends on the charge accumulated in the dielectric domains. This research paves the way to design new materials of low secondary emission yield, addressing the technological problem not yet resolved to inhibit the electron avalanche in RF equipment that limit their maximum working power., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness of Spain under “Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia”. Projects No ESP2015- 67842-P, RTI2018-095903-B-I00 and AYA2012-39832-C02-01. L.O. acknowledge support from the Spanish Ministry of Economy, Industry and Competitiveness, No BES-2013-063612
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Studies on secondary electron emission induced charging in dielectric materials: Novel methods and applications for space and plasma technologies

  • Olano, Leandro
The interaction of ionizing radiation with matter is of critical importance in many areas of science and technology such as space and plasma technology. Secondary electron emission is a direct consequence of electron irradiation on materials. To characterize materials in terms of secondary electron emission, the secondary emission yield (SEY) and the energy spectra of the secondary electrons are key physical properties. Secondary emission yields of materials are usually too high to avoid Multipactor effect or other related phenomena in applications for space. In addition, the measurement of electron energy spectra of secondary electrons in dielectric materials is a challenge due to charging issues. For the first time, in this doctoral thesis, a synergy between conductor and dielectric domains in composite materials have been experimentally reported and modeled. Composite materials with SEY < 0.2 up to high primary energies (~1 keV) have been prepared and characterized. These composite materials have been modeled using a deterministic simulation to obtain an insight on the interaction process between domains that produces such extremely low secondary emission yield. To obtain the electron energy spectra of dielectric materials, a method that takes advantage of the charging of dielectric materials during electron irradiation has been developed. The method was first tested on floating conductor samples, specifically for Cu, Ag and Au films. The results show a good fit between the new model proposed in this doctoral thesis and the electron spectra obtained with a hemispherical electron energy analyzer. Once the validity of the method was proved, it was used on dielectric materials. Kapton, Teflon and Ultem polymers were selected due to their applications in the space industry. The energy spectra of secondary electrons of these materials was measured and it showed a peak at 1.9 ± 0.1 eV for Kapton, 2.3 ± 0.1 eV for Teflon and 4.3 ± 0.2 eV for Ultem. The results shown in this thesis on the composite materials pave the way to design new materials of low secondary emission yield. These materials are needed in certain vacuum applications, such as RF communications, as a high secondary emission yield produces an electron avalanche that limits the maximum working power of the RF devices. Also, the research on the charging of dielectric materials under electron irradiation has provided a new method to characterize the secondary electron energy spectra of dielectrics. The measurement of these spectra has been traditionally difficult due to the charging of the material as high electron doses were needed. The presented new method allows to obtain the energy spectra with doses of only 10 pC/mm2, which ensures a minimal distortion of the pristine state of the dielectric material by avoiding radiation damage, deep charging, defects, aging and other electron induced phenomena on the insulator., Spanish Ministry of Science, Innovation and Universities of Spain under the “Proyectos de I+D+I Retos de la Investigación”. Project No RTI2018-095903-B-I00., Peer reviewed