Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antibacterial approaches in tissue engineering using metal ions and nanoparticles: From mechanisms to applications, Metal ions; Metal nanoparticles; Mechanism of action; Antibacterial activity; Tissue engineering; Biomaterials applications

  • Godoy-Gallardo, María
  • Eckhard, Ulrich
  • Delgado, Luis M.
  • Roo Puente, Yolanda J.D. de
  • Hoyos-Nogués, Mireia
  • Gil, Francisco Javier
  • Pérez, Román A.
© 2021 The Authors., Bacterial infection of implanted scaffolds may have fatal consequences and, in combination with the emergence of multidrug bacterial resistance, the development of advanced antibacterial biomaterials and constructs is of great interest. Since decades ago, metals and their ions had been used to minimize bacterial infection risk and, more recently, metal-based nanomaterials, with improved antimicrobial properties, have been advocated as a novel and tunable alternative. A comprehensive review is provided on how metal ions and ion nanoparticles have the potential to decrease or eliminate unwanted bacteria. Antibacterial mechanisms such as oxidative stress induction, ion release and disruption of biomolecules are currently well accepted. However, the exact antimicrobial mechanisms of the discussed metal compounds remain poorly understood. The combination of different metal ions and surface decorations of nanoparticles will lead to synergistic effects and improved microbial killing, and allow to mitigate potential side effects to the host. Starting with a general overview of antibacterial mechanisms, we subsequently focus on specific metal ions such as silver, zinc, copper, iron and gold, and outline their distinct modes of action. Finally, we discuss the use of these metal ions and nanoparticles in tissue engineering to prevent implant failure., M.G-G and U.E have received funding from the postdoctoral fellowship programme Beatriu de Pinós, funded by the Secretary of Universities and Research (Government of Catalonia) and by the Horizon 2020 programme of research and innovation of the European Union under the Marie Sklodowska-Curie grant agreement No 801370. R.A.P is supported by the Spanish Ministry by the Ramón y Cajal Program (RYC2018-025977-I). Additional financial support was provided by the Government of Catalonia (2017 SGR 708) and MINECO/FEDER project (RTI2018-096088-J-100).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing the potential role of copper and cobalt in stimulating angiogenesis for tissue regeneration

  • Bosch Rué, Elia
  • Díez-Tercero, Leire
  • Rodríguez González, Raquel
  • Bosch Canals, Begoña Maria
  • Pérez Antoñanzas, Roman
RAP was funded by the Government of Catalonia (2017 SGR 708), the Spanish Ministry (Ramón y Cajal fellowship (RYC2018-025977-I) and project RTI2018-096088-J-100 (MINECO/FEDER), and EBR, LDT, RRG predoctoral fellowship from Universitat Internacional de Catalunya (UIC). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript., The use of copper (Cu2+) and cobalt (Co2+) has been described to stimulate blood vessel formation, a key process for the success of tissue regeneration. However, understanding how different concentrations of these ions affect cellular response is important to design scaffolds for their delivery to better fine tune the angiogenic response. On the one hand, gene expression analysis and the assessment of tubular formation structures with human umbilical vein endothelial cells (HUVEC) revealed that high concentrations (10μM) of Cu2+ in early times and lower concentrations (0.1 and 1μM) at later times (day 7) enhanced angiogenic response. On the other hand, higher concentrations (25μM) of Co2+ during all time course increased the angiogenic gene expression and 0.5, 5 and 25μM enhanced the ability to form tubular structures. To further explore synergistic effects combining both ions, the non-toxic concentrations were used simultaneously, although results showed an increased cell toxicity and no improvement of angiogenic response. These results provide useful information for the design of Cu2+ or Co2+ delivery scaffolds in order to release the appropriate concentration during time course for blood vessel stimulation., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimization of guanosine-based hydrogels with boric acid derivatives for enhanced long-term stability and cell survival

  • Merino Gómez, Maria
  • Godoy-Gallardo, Maria
  • Wendner, Mathias
  • Mateos Timoneda, Miguel Angel
  • Gil, FJ
  • Perez, Roman A.
MG-G has received funding from the postdoctoral fellowship programme Beatriu de Pinós (2018 BP 00155), funded by the Secretary of Universities and Research (Government of Catalonia) and by the Horizon 2020 programme of research and innovation of the European Union under the Marie Sklodowska-Curie grant agreement No. 801370. MM-T is supported by the Spanish Ministry of Science with the project (RTI2018-096320-B-C21, 2018). RP is supported by the Spanish Ministry by the Ramón y Cajal Program (RYC2018-025977-I) and MINECO/FEDER project (RTI2018-096088-J-100). Additional financial support was provided by the Government of Catalonia (2017 SGR 708)., Tissue defects can lead to serious health problems and often require grafts or transplants to repair damaged soft tissues. However, these procedures can be complex and may not always be feasible due to a lack of available tissue. Hydrogels have shown potential as a replacement for tissue grafts due to their ability to support cell survival and encapsulate biomolecules such as growth factors. In particular, guanosine-based hydrogels have been explored as a potential solution, but they often exhibit limited stability which hampers their use in the biofabrication of complex grafts. To address this issue, we explored the use of borate ester chemistry and more complex boric acid derivatives to improve the stability and properties of guanosine-based hydrogels. We hypothesized that the aromatic rings in these derivatives would enhance the stability and printability of the hydrogels through added π-π stack interactions. After optimization, 13 compositions containing either 2-naphthylboronic acid or boric acid were selected. Morphology studies shows a well-defined nanofibrilar structure with good printable properties (thixotropic behaviour, print fidelity and printability). Moreover, the pH of all tested hydrogels was within the range suitable for cell viability (7.4–8.3). Nevertheless, only the boric acid-based formulations were stable for at least 7 days. Thus, our results clearly demonstrated that the presence of additional aromatic rings did actually impair the hydrogel properties. We speculate that this is due to steric hindrance caused by adjacent groups, which disrupt the correct orientation of the aromatic groups required for effective π-π stack interactions of the guanosine building block. Despite this drawback, the developed guanosine-boric acid hydrogel exhibited good thixotropic properties and was able to support cell survival, proliferation, and migration. For instance, SaOS-2 cells planted on these printed structures readily migrated into the hydrogel and showed nearly 100% cell viability after 7 days. In conclusion, our findings highlight the potential of guanosine-boric acid hydrogels as tissue engineering scaffolds that can be readily enhanced with living cells and bioactive molecules. Thus, our work represents a significant advancement towards the development of functionalized guanosine-based hydrogels., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Biological roles and delivery strategies for ions to promote osteogenic induction

  • Bosch-Rué, Elia
  • Diez-Tercero, Leire
  • Giordano-Kelhoffer, Barbara
  • Delgado, Luis M.
  • Bosch Canals, Begoña María
  • Hoyos Nogués, Mireia
  • Mateos-Timoneda, Miguel Angel
  • Tran, Phong A.
  • Gil Mur, Francisco Javier
  • Pérez Antoñanzas, Roman
This work was funded by the Government of Catalonia (2017 SGR 708), the Spanish Ministry (Ramón y Cajal fellowship (RYC2018-025977-I) and project RTI2018-096088- J-100 (MINECO/FEDER), and pre-doctoral fellowship from Universitat Internacional de Catalunya (UIC)., Bone is the most studied tissue in the field of tissue regeneration. Even though it has intrinsic capability to regenerate upon injury, several pathologies and injuries could hamper the highly orchestrated bone formation and resorption process. Bone tissue engineering seeks to mimic the extracellular matrix of the tissue and the different biochemical pathways that lead to successful regeneration. For many years, the use of extrinsic factors (i.e., growth factors and drugs) to modulate these biological processes have been the preferred choice in the field. Even though it has been successful in some instances, this approach presents several drawbacks, such as safety-concerns, short release profile and half-time life of the compounds. On the other hand, the use of inorganic ions has attracted significant attention due to their therapeutic effects, stability and lower biological risks. Biomaterials play a key role in such strategies where they serve as a substrate for the incorporation and release of the ions. In this review, the methodologies used to incorporate ions in biomaterials is presented, highlighting the osteogenic properties of such ions and the roles of biomaterials in controlling their release., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modulation of macrophage response by copper and magnesium ions in combination with low concentrations of dexamethasone

  • Díez-Tercero, Leire
  • Delgado, Luis M.
  • Antoñanzas Perez, Roman
This work was funded by the Government of Catalonia (Grant number 2017 SGR 708), the Spanish Ministry by Ramón y Cajal fellowship (Grant number RYC2018-025977-I) and MINECO/FEDER project (Grant number RTI2018-096088-J-100), and a predoctoral fellowship from Universitat Internacional de Catalunya (UIC)., Macrophages have been deemed crucial for correct tissue regeneration, which is a complex process with multiple overlapping phases, including inflammation. Previous studies have suggested that divalent ions are promising cues that can induce an anti-inflammatory response, since they are stable cues that can be released from biomaterials. However, their immunomodulatory potential is limited in a pro-inflammatory environment. Therefore, we investigated whether copper and magnesium ions combined with low concentrations of the anti-inflammatory drug, dexamethasone (dex), could have a synergistic effect in macrophage, with or without pro-inflammatory stimulus, in terms of morphology, metabolic activity and gene expression. Our results showed that the combination of copper and dex strongly decreased the expression of pro-inflammatory markers, while the combination with magnesium upregulated the expression of IL-10. Moreover, in the presence of a pro-inflammatory stimulus, the combination of copper and dex induced a strong TNF-α response, suggesting an impairment of the anti-inflammatory actions of dex. The combination of magnesium and dex in the presence of a pro-inflammatory stimulus did not promote any improvement in comparison to dex alone. The results obtained in this study could be relevant for tissue engineering applications and in the design of platforms with a dual release of divalent ions and small molecules., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polydopamine incorporation enhances cell differentiation and antibacterial properties of 3D-printed guanosine-borate hydrogels for functional tissue regeneration

  • Merino Gómez, Maria
  • Gil, FJ
  • Perez, Roman
  • Godoy-Gallardo, Maria
M.G.-G. has received funding from the postdoctoral fellowship program Beatriu de Pinós (2018 BP 00155), funded by the Secretary of Universities and Research (Government of Catalonia) and by the Horizon 2020 program of research and innovation of the European Union under the Marie Sklodowska-Curie grant agreement No. 801370. R.A.P. is supported by the Spanish Ministry by the Ramón y Cajal Program (RYC2018-025977-I) and MINECO/FEDER project (RTI2018-096088-J-100). Additional financial support was provided by the Government of Catalonia (2021 SGR 00565)., Tissue engineering focuses on the development of materials as biosubstitutes that can be used to regenerate, repair, or replace damaged tissues. Alongside this, 3D printing has emerged as a promising technique for producing implants tailored to specific defects, which in turn increased the demand for new inks and bioinks. Especially supramolecular hydrogels based on nucleosides such as guanosine have gained increasing attention due to their biocompatibility, good mechanical characteristics, tunable and reversible properties, and intrinsic self-healing capabilities. However, most existing formulations exhibit insufficient stability, biological activity, or printability. To address these limitations, we incorporated polydopamine (PDA) into guanosine-borate (GB) hydrogels and developed a PGB hydrogel with maximal PDA incorporation and good thixotropic and printability qualities. The resulting PGB hydrogels exhibited a well-defined nanofibrillar network, and we found that PDA incorporation increased the hydrogel’s osteogenic activity while having no negative effect on mammalian cell survival or migration. In contrast, antimicrobial activity was observed against the Gram-positive bacteria Staphylococcus aureus and Staphylococcus epidermidis. Thus, our findings suggest that our PGB hydrogel represents a significantly improved candidate as a 3D-printed scaffold capable of sustaining living cells, which may be further functionalized by incorporating other bioactive molecules for enhanced tissue integration., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Oozing: an accessible technique to create 3D-printed scaffolds suitable for tissue engineering

  • Crespo Santiago, Juan
  • Delgado, Luis M.
  • Madariaga, Rafa
  • Millan , Laia
  • Chico, Oriol
  • Oliver, Pau
  • Pérez Antoñanzas, Román
  • Otero-Viñas, Marta
The authors would like to thank the Government of Catalonia [2017 SGR 708 and 2021 XARDI 00002]; the Spanish Ministry of Science and Innovation Ramón y Cajal fellowship [RYC2018-025977-I]; MINECO/FEDER Project [RTI2018-096088-J-100]; and the PO FEDER of Catalonia 20142020 [project PECT Osona Transformació Social, Ref. 001-P-000382]., Tissue-engineered constructs require mimicking the extracellular matrix microenvironment of native tissue for better promoting cell growth. Commercial three-dimensional (3D) printers provide a versatile platform to fabricate tissue models, but they possess certain constraints regarding the reproduction of natural tissue structures due to the limited functionality of current slicing strategies and hardware. In this study, we present a new approach to 3D-printing polylactic acid (PLA) constructs with fibers in the range of microns by combining the oozing effect and algorithm-aided design (AAD) with a conventional fused deposition modeling printer. Three different oozing geometries were compared with two controls to explore their mechanical behavior and their cellular culture growth potential. Microscopic analysis revealed that oozing groups possessed higher porosity and statistically significantly thinner fibers than controls. Sodium hydroxide treatment reversibly increased the hydrophilicity of PLA without affecting the scaffolds’ mechanical properties in the compression tests. In addition, cell culture assays showed that oozing specimens exhibited a greater capacity of promoting SaOs-2 osteoblastic cell proliferation after 7 days in comparison with controls. We demonstrated that randomly distributed microfibered environments can be fabricated with an ordinary 3D printer utilizing the oozing effect and advanced AAD, resulting in improved biomimetic 3D constructs for tissue-engineering strategies., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Biofabrication of collagen tissue-engineered blood vessels with direct co-axial extrusion

  • Bosch Rué, Elia
  • Díez-Tercero, Leire
  • Delgado, Luis Maria
  • Perez, Roman
This work was funded by the Government of Catalonia (2017 SGR 708), the Spanish Ministry (Ramón y Cajal fellowship (RYC2018-025977-I), project RTI2018-096088-J-100 (MINECO/FEDER), and a predoctoral fellowship from Universitat Internacional de Catalunya (UIC)., Cardiovascular diseases are considered one of the worldwide causes of death, with atherosclerosis being the most predominant. Nowadays, the gold standard treatment is blood vessel replacement by bypass surgery; however, autologous source is not always possible. Thereby, tissue-engineered blood vessels (TEBVs) are emerging as a potential alternative source. In terms of composition, collagen has been selected in many occasions to develop TEBVs as it is one of the main extracellular matrix components of arteries. However, it requires specific support or additional processing to maintain the tubular structure and appropriate mechanical properties. Here, we present a method to develop support-free collagen TEBVs with co-axial extrusion in a one-step procedure with high concentrated collagen. The highest concentration of collagen of 20 mg/mL presented a burst pressure of 619.55 ± 48.77 mmHg, being able to withstand perfusion of 10 dynes/cm2. Viability results showed a high percentage of viability (86.1 and 85.8% with 10 and 20 mg/mL, respectively) of human aortic smooth muscle cells (HASMCs) and human umbilical vein endothelial cells (HUVEC) after 24 h extrusion. Additionally, HUVEC and HASMCs were mainly localized in their respective layers, mimicking the native distribution. All in all, this approach allows the direct extrusion of collagen TEBVs in a one-step procedure with enough mechanical properties to be perfused., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Direct extrusion of individually encapsulated endothelial and smooth muscle cells mimicking blood vessel structures and vascular native cell alignment

  • Bosch-Rué, Elia
  • Delgado, Luis M.
  • Gil Mur, Francisco Javier
  • Pérez Antoñanzas, Roman
This work was funded by the Government of Catalonia (2017 SGR 708), the Spanish Ministry (Ramon´ y Cajal fellowship (RYC2018-025977-I) and project RTI2018-096088-J-100 (MINECO/FEDER), and predoctoral fellowship from Universitat Internacional de Catalunya (UIC)., Cardiovascular diseases (CVDs) are considered the principal cause of worldwide death, being atherosclerosis the main etiology. Up to now, the predominant treatment for CVDs has been bypass surgery from autologous source. However, due to previous harvest or the type of disease, this is not always an option. For this reason, tissue engineered blood vessels (TEBV) emerged as an alternative graft source for blood vessel replacement. In order to develop a TEBV, it should mimic the architecture of a native blood vessel encapsulating the specific vascular cells in their respective layers with native alignment, and with appropriate mechanical stability. Here, we propose the extrusion of two different cell encapsulating hydrogels, mainly alginate and collagen, and a sacrificial polymer, through a triple coaxial nozzle, which in contact with a crosslinking solution allows the formation of bilayered hollow fibers, mimicking the architecture of native blood vessels. Prior to extrusion, the innermost cell encapsulating hydrogel was loaded with human umbilical vein endothelial cells (HUVECs), whereas the outer hydrogel was loaded with human aortic smooth muscle cells (HASMCs). The size of the TEVB could be controlled by changing the injection speed, presenting homogeneity between the constructs. The obtained structures were robust, allowing its manipulation as well as the perfusion of liquids. Both cell types presented high rates of survival after the extrusion process as well as after 20 d in culture (over 90%). Additionally, a high percentage of HASMC and HUVEC were aligned perpendicular and parallel to the TEBV, respectively, in their own layers, resembling the physiological arrangement found in vivo. Our approach enables the rapid formation of TEBV-like structures presenting high cell viability and allowing proliferation and natural alignment of vascular cells., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Computational modeling as a tool to investigate PPI: from drug design to tissue engineering

  • Perez, Juan J.
  • Pérez Antoñanzas, Roman
  • Perez, Alberto
JJP likes to thank the Government of Catalonia (2017 SGR 163) and the Instituto de Salud Carlos III (COV20/00052) for financial support. AP is thankful for a seed grant from the University of Florida Informatics Institute (00130138). RAP is thankful for the funds provided by the Government of Catalonia (2017 SGR 708), the Spanish Ministry of Science and Innovation (Ramón y Cajal fellowship (RYC2018-025977-I) and project RTI2018-096088- J-100 (MINECO/FEDER)., Protein-protein interactions (PPIs) mediate a large number of important regulatory pathways. Their modulation represents an important strategy for discovering novel therapeutic agents. However, the features of PPI binding surfaces make the use of structure-based drug discovery methods very challenging. Among the diverse approaches used in the literature to tackle the problem, linear peptides have demonstrated to be a suitable methodology to discover PPI disruptors. Unfortunately, the poor pharmacokinetic properties of linear peptides prevent their direct use as drugs. However, they can be used as models to design enzyme resistant analogs including, cyclic peptides, peptide surrogates or peptidomimetics. Small molecules have a narrower set of targets they can bind to, but the screening technology based on virtual docking is robust and well tested, adding to the computational tools used to disrupt PPI. We review computational approaches used to understand and modulate PPI and highlight applications in a few case studies involved in physiological processes such as cell growth, apoptosis and intercellular communication., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Antibacterial approaches in tissue engineering using metal ions and nanoparticles: from mechanisms to applications

  • Godoy Gallardo, Maria
  • Eckhard, Ulrich
  • Delgado, Luis M.
  • de Roo Puente, Yolanda J.D.
  • Hoyos Nogués, Mireia
  • Gil Mur, Francisco Javier
  • Pérez Antoñanzas, Roman
M.G-G and U.E have received funding from the postdoctoral fellowship programme Beatriu de Pinos, ´ funded by the Secretary of Universities and Research (Government of Catalonia) and by the Horizon 2020 programme of research and innovation of the European Union under the Marie Sklodowska-Curie grant agreement No 801370. R.A.P is supported by the Spanish Ministry by the Ramon ´ y Cajal Program (RYC2018-025977-I). Additional financial support was provided by the Government of Catalonia (2017 SGR 708) and MINECO/FEDER project (RTI2018-096088-J-100)., Bacterial infection of implanted scaffolds may have fatal consequences and, in combination with the emergence of multidrug bacterial resistance, the development of advanced antibacterial biomaterials and constructs is of great interest. Since decades ago, metals and their ions had been used to minimize bacterial infection risk and, more recently, metal-based nanomaterials, with improved antimicrobial properties, have been advocated as a novel and tunable alternative. A comprehensive review is provided on how metal ions and ion nanoparticles have the potential to decrease or eliminate unwanted bacteria. Antibacterial mechanisms such as oxidative stress induction, ion release and disruption of biomolecules are currently well accepted. However, the exact antimicrobial mechanisms of the discussed metal compounds remain poorly understood. The combination of different metal ions and surface decorations of nanoparticles will lead to synergistic effects and improved microbial killing, and allow to mitigate potential side effects to the host. Starting with a general overview of antibacterial mechanisms, we subsequently focus on specific metal ions such as silver, zinc, copper, iron and gold, and outline their distinct modes of action. Finally, we discuss the use of these metal ions and nanoparticles in tissue engineering to prevent implant failure., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multiple ion scaffold-based delivery platform for potential application in early stages of bone regeneration

  • Bosch Rué, Elia
  • Díez-Tercero, Leire
  • Rodríguez González, Raquel
  • A. Pérez, Román
This work was funded by the Government of Catalonia (2017 SGR 708), the Spanish Ministry (Ramón y Cajal fellowship (RYC2018-025977-I) and project RTI2018-096088-J-100 (MINECO/FEDER)), and predoctoral fellowship from Universitat Internacional de Catalunya (UIC)., Bone has the intrinsic capacity to regenerate itself, as long as the damage is small, through the sequential stimulation of specific phases, such as angiogenesis followed by osteogenesis. However, when the damage is extensive it is unable to regenerate and bone tissue engineering is used as an alternative. In this study, we developed a platform to allow the triple ion delivery with sequential delivery capacity to potentially stimulate antibacterial, angiogenic and osteogenic processes. The scaffold-based platform consisted of alginate/hydroxyapatite (HA) microparticles embedded in alginate fibers. Firstly, microparticles were developed using different ratios of alginate:HA using the spraying method, resulting in a high reproducibility of the technique. Microparticle size between 100–300 µm and ratio 1:40 resulted in a more spherical morphology and were selected for their incorporation into alginate fiber. Different amounts of copper and cobalt were added with the microparticles and alginate fiber, respectively, were used as model ions which could eventually modulate and mimic antimicrobial and angiogenic processes. Moreover, calcium ion was also incorporated in both, in order to provide the system with potential osteogenic properties together with HA. The multiple delivery of copper, cobalt and calcium released were in the therapeutic range as measured by induced coupled plasma (ICP), providing a promising delivery strategy for tissue engineering., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A novel chitosan composite biomaterial with drug eluting capacity for maxillary bone regeneration

  • Giordano-Kelhoffer, Barbara
  • Rodríguez-Gonzalez, Raquel
  • Perpiñan-Blasco, Marina
  • Olmos Buitrago, Jennifer
  • Bosch Canals, Begoña Maria
  • Perez, Roman
This research was funded by the Government of Catalonia (2017 SGR 708), the Spanish Ministry (Ramón y Cajal fellowship (RYC2018-025977-I) and project RTI2018-096088-J-100 (MINECO/FEDER), and predoctoral fellowship from Universitat Internacional de Catalunya (UIC)., Bone grafting is one of the most commonly performed treatments for bone healing or repair. Autografts, grafts from the same patient, are the most frequently used bone grafts because they can provide osteogenic cells and growth factors at the site of the implant with reduced risk of rejection or transfer of diseases. Nevertheless, this type of graft presents some drawbacks, such as pain, risk of infection, and limited availability. For this reason, synthetic bone grafts are among the main proposals in regenerative medicine. This branch of medicine is based on the development of new biomaterials with the goal of increasing bone healing capacity and, more specifically in dentistry, they aim at simultaneously preventing or eliminating bacterial infections. The use of fibers made of chitosan (CS) and hydroxyapatite (HA) loaded with an antibiotic (doxycycline, DX) and fabricated with the help of an injection pump is presented as a new strategy for improving maxillary bone regeneration. In vitro characterization of the DX controlled released from the fibers was quantified after mixing different amounts of HA (10–75%). The 1% CS concentration was stable, easy to manipulate and exhibited adequate cuttability and pH parameters. The hydroxyapatite concentration dictated the combined fast and controlled release profile of CSHA50DX. Our findings demonstrate that the CS-HA-DX complex may be a promising candidate graft material for enhancing bone tissue regeneration in dental clinical practice., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of the immunomodulatory effects of cobalt, copper and magnesium ions in a pro inflammatory environment

  • Díez-Tercero, Leire
  • Delgado, Luis M.
  • Bosch-Rué, Elia
  • Pérez Antoñanzas, Roman
Tis work was funded by the Government of Catalonia (2017 SGR 708), the Spanish Ministry by Ramón y Cajal fellowship (RYC2018-025977-I) and MINECO/FEDER Project (RTI2018-096088-J-100), and predoctoral fellowship from Universitat Internacional de Catalunya (UIC)., Biomaterials and scaffolds for Tissue Engineering are widely used for an effective healing and regeneration. However, the implantation of these scaffolds causes an innate immune response in which the macrophage polarization from M1 (pro-inflammatory) to M2 (anti-inflammatory) phenotype is crucial to avoid chronic inflammation. Recent studies have showed that the use of bioactive ions such as cobalt (Co2+), copper (Cu2+) and magnesium (Mg2+) could improve tissue regeneration, although there is limited evidence on their effect on the macrophage response. Therefore, we investigated the immunomodulatory potential of Co2+, Cu2+ and Mg2+ in macrophage polarization. Our results indicate that Mg2+ and concentrations of Cu2+ lower than 10 μM promoted the expression of M2 related genes. However, higher concentrations of Cu2+ and Co2+ (100 μM) stimulated pro-inflammatory marker expression, indicating a concentration dependent effect of these ions. Furthermore, Mg2+ were able to decrease M1 marker expression in presence of a mild pro-inflammatory stimulus, showing that Mg2+ can be used to modulate the inflammatory response, even though their application can be limited in a strong pro-inflammatory environment., info:eu-repo/semantics/publishedVersion