Pasar al contenido principal

PROCESOS “POWER-TO-X” PARA LA VALORIZACION DE CO2 EN REACTORES CATALITICOS ESTRUCTURADOS (CO2-PTX)

RTI2018-096294-B-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Elucidation of Water Promoter Effect of Proton Conductor in WGS Reaction over Pt-Based Catalyst: An Operando DRIFTS Study

  • Jurado, Lole
  • García-Moncada, Nuria
  • Bobadilla, Luis F.
  • Romero-Sarria, Francisca
  • Odriozola, José Antonio
© 2020 by the authors., A conventional Pt/CeO2/Al2O3 catalyst physically mixed with an ionic conductor (Mo- or Eu-doped ZrO2) was tested at high space velocity (20,000 h−1 and 80 L h−1 gcat−1) under model conditions (only with CO and H2O) and industrial conditions, with a realistic feed. The promoted system with the ionic conductor physically mixed showed better catalytic activity associated with better water dissociation and mobility, considered as a rate-determining step. The water activation was assessed by operando diffuse reflectance infrared fourier transformed spectroscopy (DRIFTS) studies under reaction conditions and the Mo-containing ionic conductor exhibited the presence of both dissociated (3724 cm−1) and physisorbed (5239 cm−1) water on the Eu-doped ZrO2 solid solution, which supports the appearance of proton conductivity by Grotthuss mechanism. Moreover, the band at 3633 cm−1 ascribed to hydrated Mo oxide, which increases with the temperature, explains the increase of catalytic activity when the physical mixture was used in a water gas shift (WGS) reaction., Financial support for this work has been obtained from the Spanish Ministerio de Ciencia, Innovación y Universidades co-financed by FEDER funds from the European Union (ENE2015-66975-C3-2-R and RTI2018-096294-B-C33)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Current scenario and prospects in manufacturestrategies for glass, quartz, polymers and metallicmicroreactors: A comprehensive review

  • Domínguez, M.Isabel
  • Centeno, Miguel Ángel
  • Martínez T., Marcela
  • Bobadilla, Luis F.
  • Laguna, Óscar H.
  • Odriozola, José Antonio
tOne of the most remarkable benefits of the microreactors is the achievement of more effi-cient processes by enhancing the heat and mass transfer phenomena, which is the key factorfor processes intensification in chemical reactions, resulting in higher conversion, selec-tivity and yield towards desired products. Currently, the entire scenario of microreactionapproach is an emergent technology and further advances are ongoing. Several strategieshave been successfully applied for structuring processes that imply the fixation of the cata-lysts on the microreactors. However, there are features such as the physicochemical stabilityof the coatings under reaction conditions that must be improved, motivating the search fornew protocols. This review provides a general overview of the most important method-ologies applied for glass, quartz, polymers and metals microreactors manufacture and fortheir coating, analyzing the advantages and drawbacks of every procedure. Furthermore, anoutline of the novel insights based on additive manufacturing techniques are described., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of potassium loading on basic properties of Ni/MgAl2O4 catalyst for CO2 reforming of methane

  • Azancot, Lola
  • Bobadilla, Luis F.
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
. Coke deposition is one of the key issues in the dry reforming of methane on Ni catalysts. In the present work, we investigate the effect of potassium addition for suppressing carbon deposition in the Dry Reforming of Methane. The results obtained demonstrated that potassium contents above 3 wt% promote carbon gasification, favouring both Reverse Water Gas Shift and Boudouard reaction. Strong basic Mg-O-K sites are responsible for these reactions allowing the suppression of carbon deposits and allowing the stability of the catalyst, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dehydration of glucose to 5-Hydroxymethlyfurfural on bifunctional carbon catalysts

  • Bounoukta, Charf Eddine
  • Megías-Sayago, Cristina
  • Ammari, Fatima
  • Ivanova, Svetlana
  • Monzón, Antonio
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
The proposed study tries to reply on one important question concerning glucose dehydration: What is the role of bare or tandem Lewis/Brønsted acid sites in the reaction and which are better? A series of mono and bifunctional catalyst are designed and screened for the glucose dehydration reaction. The results clearly reveal that catalyst activity is a function of catalyst composition. The presence of Lewis sites the reaction toward first step isomerization, while the Brønsted acid dehydrate directly glucose to HMF via levoglucosane intermediate. This study proposed also a kinetic modelling of the included reactions and their contrast with the empirical observations., Financial support for this work was obtained from the Spanish Ministerio de Economía y Competitividad (MINECO) (Grant: ENE2017-82451-C3-3-R, RTI2018-096294-B-C33) co-financed by FEDER funds from the European Union. C. Bounoukta acknowledges Universidad de Sevilla and the Directorate General for Scientific Research and Technological Development (DGRSTD) of Algerian Ministry of Higher Education (MESRS) for his PhD scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Process design and utilisation strategy for CO2 capture in flue gases. Technical assessment and preliminary economic approach for steel mills

  • Navarro de Miguel, Juan Carlos
  • Baena-Moreno, Francisco M.
  • Centeno, Miguel Ángel
  • Laguna, O. H.
  • Almagro, J. F.
  • Odriozola, José Antonio
The steel industry is the most relevant sector in emerging economies due to its application in numerous fields. However, steel manufacturing involves large energy investment and produces significant greenhouse gas emissions. The current world economic and environmental scenario therefore necessitates that improvements in the footprint of the steel industry be made without affecting its viability. Considering the present challenge, we report two possible processes for Carbon Capture and Utilization (CCU). The first process is the competitive capture of CO2–SO2, followed by CO2 valorisation to methane. However, the CO2 capture capacity and lifetime for the adsorbent after multiple cycles could be improved through preliminary desulphurization of the gas current. The improved system demonstrates net profitability in a typical stainless steel plant. Therefore, it can be implemented in an industrial setting without profitability loss to steelmaking operations, fulfilling bot the goal of reducing CO2 emissions while protecting the mainstay of the plant., Financial support for this work was obtained from Junta de Andalucia via grant US-126388 and Spanish Ministerio de Ciencia e Innovacion ´ (MICIN) (Grant number RTI2018-096294-B-C33) all cofinanced by FEDER funds from the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spinel ferrite catalysts for CO2 reduction via reverse water gas shift reaction

  • Navarro de Miguel, Juan Carlos
  • Hurtado, C.
  • González Castaño, M.
  • Bobadilla, Luis F.
  • Ivanova, Svetlana
  • Cumbrera, Francisco Luis
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
The production of CO via Reverse Water Gas Shift (RWGS) reaction is a suitable route for CO2 valorization. In this study a series of modified spinels AB2O4 (A site = Ni, Zn and Cu and B site=Fe) are investigated as RWGS catalysts and their structure-to-function relationships derived from the changes on the A-site cation are rationalized. For all ferrite systems, the RWGS reaction the process main activity and selectivity is governed by the B-site cation, but the variations on the A-site metals determines catalysts' structural features and stability in the reaction. Among the catalyst series, superior RWGS performance displayed the ferrites modified with Cu and Ni associated to the greater oxygen vacancy population for those spinels enabled by the partial allocation on Fe3+ cations into the tetrahedral sites., Financial support for this work was obtained from Junta de Andalucía via grant US-1263288 and Spanish Ministerio de Ciencia e Innovación (MICIN) (Grant number RTI2018-096294-B-C33) all co-financed by FEDER funds from the European Union. Dr. González-Castaño acknowledges the Spanish Ministry of Universities and the European Union (Next Generation EU) for the excellence Maria Zambrano fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of noble metal addition over active Ru/TiO2 catalyst for CO selective methanation from H2 rich-streams

  • Bobadilla, Luis F.
  • Muñoz-Murillo, A.
  • Gándara-Loe, J.
  • Pérez, A.
  • Laguna, O. H.
  • Martínez Tejada, L.M.
  • Penkova, Anna
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
Selective CO methanation from H2-rich stream has been regarded as a promising route for deep removal of low CO concentration and catalytic hydrogen purification processes. This work is focused on the development of more efficient catalysts applied in practical conditions. For this purpose, we prepared a series of catalysts based on Ru supported over titania and promoted with small amounts of Rh and Pt. Characterization details revealed that Rh and Pt modify the electronic properties of Ru. The results of catalytic activity showed that Pt has a negative effect since it promotes the reverse water gas shift reaction decreasing the selectivity of methanation but Rh increases remarkably the activity and selectivity of CO methanation. The obtained results suggest that RuRh-based catalyst could become important for the treatment of industrial-volume streams., Financial support for this work has been obtained from the Spanish Ministerio de Ciencia, Innovación y Universidades (Grant: RTI2018-096294-B-C33) and Junta de Andalucía project with reference US-1263288, both programs being co-funded by the European Union FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the promotional effect of Pt/CeO2 in cobalt-catalyzed Fischer-Tropsch synthesis using operando infrared spectroscopy at moderated pressures

  • Bobadilla, Luis F.
  • Egaña, Ane
  • Castillo, Rafael
  • Romero-Sarria, F.
  • Centeno, Miguel Ángel
  • Sanz, Oihane
  • Montes, Mario
  • Odriozola, José Antonio
Fischer-Tropsch (FTS) reaction is a well-known catalytic process for the conversion of synthesis gas into liquid fuels. The addition of a water gas shift (WGS) catalyst to the FTS one has been postulate to notably increase the efficiency of the process. In order to investigate this issue, we conducted the FTS reaction over a Co-Re/Al2O3 catalyst combined with an optimal WGS Pt/CeO2 catalyst. We observed a notable increase of CO conversion in presence of the Pt/CeO2 catalyst that a priori could be attributed to the WGS reaction. However, the WGS reaction is unfavourable at pressures higher than 1 bar and CO/CO2 hydrogenation over Pt/CeO2 could be more favoured under FTS reaction conditions. In order to gain insights on this fact and elucidate the role of Pt/CeO2 in the FTS reaction we have performed an operando DRIFTS-MS study under close FTS reaction conditions at 4 bar over the Pt/CeO2 catalyst., Financial support for this work has been obtained from the Spanish Ministerio de Economía y Competitividad – MINECO (ENE2015-66975-C3-2-R and RTI2018-096294-B-C33) co-financed by FEDER funds from the European Union. The authors acknowledge the Basque Government (IT1069-16) and the Spanish MINECO/FEDER (RTI2018-096294-B-C32 and CTQ2015-73901-JIN) for financial support. Grants ENE2015-66975-C3-3-R and CTQ2015-73901-JIN funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR”. We thank the the Basque Government (IT1069-16) for the financial support of this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic reforming of model biomass-derived producer gas

  • Azancot, Lola
  • Bobadilla, Luis F.
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
This work includes a complete study of the reaction of reforming a simulated producer gas stream comparing a Ni-based catalyst with another one promoted with potassium to enhance the resistance to coke formation. Although coke deposition is unavoidable in the presence of tars in the stream, the analysis of different reaction parameters revealed that operating at 750 °C, weight hourly space velocity (WHSV) of 60 L−1 g−1 h−1 and 10–20 vol% of steam is possible to minimize the accumulation of carbon deposits. Moreover, it was demonstrated that the addition of potassium helps to mitigate carbon formation, but a high concentration of steam leads to nickel sintering and/or partial oxidation of metallic nickel. On this basis, it was successfully evidenced that the Ni-K catalyst is an excellent candidate for obtaining clean syngas from producer gas reforming., Financial support for this work has been obtained from the Spanish Ministerio de Economía y Competitividad – MINECO (RTI2018-096294-B-C33 and ENE2015-66975-C3-2-R projects) co-financed by FEDER funds from the European Union and the Universidad de Sevilla-Junta de Andalucía Program under contract US-1263288. Lola Azancot acknowledges the MINECO for her associated PhD fellowship (BES-2016-0077475)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal micromonoliths for the cleaning of H2 by means of methanation reactions

  • Laguna, O. H.
  • Muñoz-Murillo, A.
  • Bobadilla, Luis F.
  • Martínez T., L. M.
  • Montes, M.
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
The present manuscript presents for the first time the structuring of a Ru/TiO2 catalyst that was achieved by means of the washcoating procedure using homemade metal micromonoliths (Fecralloy®) of 1330 cpsi. For this, an optimized formulation of the slurried catalyst as well as a reproducible protocol for the coating of the micromonoliths were successfully achieved. The obtained structured systems were tested in the selective CO methanation reaction and the effect of different variables over the catalytic performance were analyzed such as the amount of loaded catalyst in the micromonoliths, the temperature of reaction, the space velocity, and the amount of CO and H2 within the feed-stream. The study of all of these parameters allowed to establish optimal conditions to maximize the performance of the structured Ru/TiO2 catalyst and subsequently, this was tested under those cited conditions in long-term tests (∼375 h), including shut-down/start-up cycles, aiming to evaluate its catalytic stability. The system presented a considerable stability along the different test without loss of catalytic activity, being specially remarkable its resistance to the inclusion of shut-down/start-up cycles. Therefore, this study lays the foundations for future development of more sophisticated structured systems for the selective CO methanation based on the structuring strategy proposed., O.H. Laguna thanks the financial support provided by the University of Jaén through the funding program “Acción 6 del Plan de Apoyo a la Investigación de la Universidad de Jaén (2017-2019)”. M. Montes thanks the Spanish Ministerio de Economía y competitividad (MINECO) for the financial support by means of the Grant: CTQ2015-73901-JIN, co-financed by FEDER funds from the European Union. J.A. Odriozola thanks the Spanish Ministerio de Economía y competitividad (MINECO) for the financial support by means of the Grant: RTI2018-096294-B-C33, co-financed by FEDER funds from the European Union. Finally, the authors gratefully acknowledge Junta de Andalucía for financial support of the TEP106 group., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of new Ni-O-K catalytic sites with superior stability for methane dry reforming

  • Azancot, Lola
  • Blay, Vincent
  • Blay-Roger, Rubén
  • Bobadilla, Luis F.
  • Penkova, Anna
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
Liquid fuels produced via Fischer-Tropsch synthesis from biomass-derived syngas constitute an attractive and sustainable energy vector for the transportation sector. This study focuses on the role of potassium as a promoter in Ni-based catalysts for reducing coke deposition during catalytic dry reforming. The study provides a new structural link between catalytic performance and physicochemical properties. We identify new Ni-O-K chemical states associated with high stability in the reforming process, evidenced by different characterization techniques. The nickel particles form a core surrounded by a Ni-O-K phase layer (Ni@Ni-O-K) during the reduction of the catalyst. This phase likely presents an alkali-nickelate-type structure, in which nickel is stabilized in oxidation state + 3. The Ni-O-K formation induces essential changes in the electronic, physical, structural, and morphological properties of the catalysts, notably enhancing their long-term stability in dry reforming. This work thus provides new directions for designing more efficient catalysts for sustainable gas-to-liquids processes., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Power-to-X Catalytic Processes for CO2 Valorisation: From the Molecular Level to the Reactor Architecture

  • Bobadilla, Luis F.
  • Azancot, Lola
  • Luque-Álvarez, Ligia A.
  • Torres-Sempere, Guillermo
  • González-Castaño, Miriam
  • Pastor-Pérez, Laura
  • Yu, Jie
  • Ramírez-Reina, Tomás
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
Nowadays, global climate change is likely the most compelling problem mankind is facing. In this scenario, decarbonisation of the chemical industry is one of the global challenges that the scientific community needs to address in the immediate future. Catalysis and catalytic processes are called to play a decisive role in the transition to a more sustainable and low-carbon future. This critical review analyses the unique advantages of structured reactors (isothermicity, a wide range of residence times availability, complex geometries) with the multifunctional design of efficient catalysts to synthesise chemicals using CO2 and renewable H2 in a Power-to-X (PTX) strategy. Fine-chemistry synthetic methods and advanced in situ/operando techniques are essential to elucidate the changes of the catalysts during the studied reaction, thus gathering fundamental information about the active species and reaction mechanisms. Such information becomes crucial to refine the catalyst’s formulation and boost the reaction’s performance. On the other hand, reactors architecture allows flow pattern and temperature control, the management of strong thermal effects and the incorporation of specifically designed materials as catalytically active phases are expected to significantly contribute to the advance in the valorisation of CO2 in the form of high added-value products. From a general perspective, this paper aims to update the state of the art in Carbon Capture and Utilisation (CCU) and PTX concepts with emphasis on processes involving the transformation of CO2 into targeted fuels and platform chemicals, combining innovation from the point of view of both structured reactor design and multifunctional catalysts development., Financial support for this work has been obtained from the Spanish Ministerio de Ciencia, Innovación y Universidades (Grant: RTI2018-096294-B-C33) and Junta de Andalucia projects with references US-1263288, P18-RT-3405, and P20-00594, all of them co-funded by the European Union FEDER. This work is also sponsored by the Spanish Ministry of Science and Innovation through the projects PID2019-108502RJ-I00 and grant IJC2019-040560-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reforming of biomass-derived producer gas using toluene as model tar: Deactivation and regeneration studies in Ni and K-Ni catalysts

  • González Castaño, M.
  • Bobadilla, Luis F.
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
  • Azancot, Lola
Chemicals and CAS Registry Numbers carbon dioxide 124-38-9, 58561-67-4 nickel 7440-02-0 toluene 108-88-3 Carbon Dioxide Nickel Toluene, Within the syngas production from biomass gasification, tar removal constitutes a chief issue to overcome for advanced catalytic systems. This work investigates the performance of Ni and Ni-K catalysts for reforming of derived-biomass producer gas using toluene as model tar. At 750 °C and 60Lg-1h-1, the stability test (70 h) revealed stable performances (CO2, CH4 and C7H8 conversions of 60, 95 and 100%, correspondingly) uniquely for the Ni-K catalyst. Although the efficient protection towards coking let by K was demonstrated, TPO studies over the post-reacted systems still evidenced the presence of carbon deposits for both samples. Conducting three successive reaction/regeneration cycles with different gasifying agents (air, steam and CO2) at 800 °C for 1h, the capability towards regeneration of both catalytic systems was assessed and the spent catalysts were characterized by XRD, SEM and TEM. While none of the regeneration treatments recovered the performance of the unpromoted catalyst, the Ni-K catalysts demonstrated the capability of being fully regenerated by air and CO2 and exhibited analogous catalytic performances after a series of reaction/regeneration cycles. Hence, it is proved that the addition of K into Ni catalysts not only enhances the resistance against deactivation but enables rather facile regenerative procedures under certain atmospheres (air and CO2)., Financial support for this work has been obtained from the Spanish Ministerio de Economía y Competitividad – MINECO (RTI2018-096294-B-C33 and ENE2015-66975-C3-2-R projects) co-financed by FEDER funds from the European Union and the Universidad de Sevilla-Junta de Andalucía Program under contract US-1263288. Lola Azancot acknowledges the MINECO for her associated PhD fellowship (BES-2016-0077475)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the Synergistic Interaction between Nickel- and Ruthenium-Based Catalysts for Carbon Dioxide Methanation Reaction

  • Navarro de Miguel, Juan Carlos
  • Bobadilla, Luis F.
  • Centeno, Miguel Ángel
  • Laguna, Oscar H.
  • Odriozola, José Antonio
The utilization of nickel-ruthenium as bimetallic catalysts is widely recognized for its efficacy in enhancing the catalytic performance in the carbon dioxide methanation reaction. The present study focuses on the synergistic interplay between both active sites and their respective roles in the reaction mechanism through operando DRIFT-MS analysis. Findings reveal that the bimetallic catalyst is constituted by NiRu nanocrystallites with Ru atoms segregated at defect edge/corner sites, promoting the dissociation of carbon dioxide and the formation of CH<inf>x</inf> species. Furthermore, Ni atoms predominantly occupy facets or terrace sites, characterized by higher electron density conducive to carbon monoxide hydrogenation to methane. This research offers a comprehensive elucidation of the carbon dioxide methanation mechanism within a bimetallic system and underscores the efficacy of the operando methodology in advancing our fundamental understanding of heterogeneous catalysis., Financial support for this work has been obtained from the Spanish Ministerio de Ciencia, Innovación y Universidades (Grant: RTI2018-096294-B-C33)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Au and Pt Remain Unoxidized on a CeO2-Based Catalyst during the Water-Gas Shift Reaction

  • Ramírez-Reina, Tomás
  • González-Castaño, M.
  • López-Flores, Víctor
  • Martínez Tejada, L.M.
  • Zitolo, Andrea
  • Ivanova, Svetlana
  • Xu, Wenquian
  • Centeno, Miguel Ángel
  • Rodríguez, Jose A.
  • Odriozola, José Antonio
The active forms of Au and Pt in CeO2-based catalysts for the water–gas shift (WGS) reaction are an issue that remains unclear, although it has been widely studied. On one hand, ionic species might be responsible for weakening the Ce–O bonds, thus increasing the oxygen mobility and WGS activity. On the other hand, the close contact of Au or Pt atoms with CeO2 oxygen vacancies at the metal–CeO2 interface might provide the active sites for an efficient reaction. In this work, using in situ X-ray absorption spectroscopy, we demonstrate that both Au and Pt remain unoxidized during the reaction. Remarkable differences involving the dynamics established by both species under WGS atmospheres were recognized. For the prereduced Pt catalyst, the increase of the conversion coincided with a restructuration of the Pt atoms into cuboctahedrical metallic particles without significant variations on the overall particle size. Contrary to the relatively static behavior of Pt0, Au0 nanoparticles exhibited a sequence of particle splitting and agglomeration while maintaining a zero oxidation state despite not being located in a metallic environment during the process. High WGS activity was obtained when Au atoms were surrounded by oxygen. The fact that Au preserves its unoxidized state indicates that the chemical interaction between Au and oxygen must be necessarily electrostatic and that such an electrostatic interaction is fundamental for a top performance in the WGS process., We acknowledge ALBA and SOLEIL synchrotrons and the NSLS at Brookhaven National Laboratory (BNL) for providing synchrotron radiation facilities and beamtime allocation. The research carried out at BNL was supported under contract DE-SC0012704 with the US Department of Energy, Division of Chemical Sciences. We would like to thank C. Marini and the rest of the scientific and technical staff of the CLÆSS, SAMBA, and X18B beamlines for their invaluable help during the beamtime. Authors would also like to acknowledge the Spanish Ministry of Science and Innovation through projects (RTI2018-096294–B-C33 and RYC2018-024387-I., Peer reviewed