Pasar al contenido principal

HIDRODINAMICA DE ELEMENTOS DE AMORTIGUAMIENTO DEL MOVIMIENTO DE AEROGENERADORES FLOTANTES

RTI2018-096791-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

A particle image velocimetry investigation of the flow field close to a heave plate for models of different scales

  • Saettone, Simone
  • Molinelli Fernández, E.
  • Soriano Gómez, C.
  • Saavedra Ynocente, Leandro
  • Duque Campayo, D.
  • Souto Iglesias, A.
  • Marón Loureiro, Adolfo
Highlights Experimental investigation of the impact of the scale factor on the flow physics of semi-submersible platforms. Similarities in centre positions, shape, and contours for the measured velocity field between three models of different scales. Similarities in centre positions, shape, and contours for the computed vorticity field between three models of different scales. The correct choice of the motion amplitude (KC) impacts the flow physics of the model tests more than the scale factor.Supplementary data associated with this article can be found at: http://canal.etsin.upm.es/papers/saettoneetal2022/., Semi-submersible floating wind turbines are generally equipped with heave plates to introduce additional hydrodynamic damping and decrease the platform’s natural frequency. Scale effects are one of the most critical problems concerning the accuracy of model-scale experiments on these damping-augmenting devices. The current research aimed to assess the impact of the scale factor on the flow physics of oscillating circular solid plates. Forced oscillation flow visualisation model-scale experiments were performed on three geometrically similar one-leg columns of a semi-submersible platform equipped with a circular solid flat heave plate. The forced oscillation tests were performed in the range of extreme and operational Keulegan–Carpenter numbers (KCs) for two different frequencies of the heave plate’s oscillatory motion. A submersible two-dimensional (2D) three-component (3C) Stereoscopic Particle Image Velocimetry (Stereo-PIV) system was employed to measure the flow field velocity distribution. The Stereo-PIV images were obtained at four positions in the oscillation cycle. The investigation focused on detecting scale effects on the velocity and vorticity for the three models of different scales. Similarities in centre positions, shape, and contours between the three models were visualised for the measured velocity field. The computed vorticity field also revealed similarities in centre positions, shape, and contours among the three different scales. Following up on previous works focusing on the hydrodynamic forces on oscillating circular solid plates, the outcomes of this paper also confirm that, for the considered case study, the correct choice of the motion amplitude (KC) impacts the flow physics of the model tests more than the scale factor., The authors want to express their gratitude for the financial support received by the Ministerio de Ciencia e Innovación (MCIU) under Grants RTI2018-096791-B-C21 and RTI2018-096791-B-C22 “Hidrodinámica de elementos de amortiguamiento del movimiento de aerogeneradores flotantes”., Peerreview
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and numerical methodology for the aero-thermal analysis of a SACOC heat exchanger

  • Chávez-Modena, Miguel
  • Miguel González, Leo
  • Valero, Eusebio
  • Felgueroso, Andrés
  • Broatch, A.|||0000-0001-9991-1039
  • García-Tíscar, Jorge|||0000-0003-4934-4587
[EN] Surface air-cooled oil coolers (SACOC) are being used in the aerospace industry. This device is a passive heat exchanger used to dissipate a large amount of heat from the oil circuit of a turbofan engine to its secondary flow with minimal impact on turbofan efficiency. Typically, heat exchangers are formed by parallel fins and it is important to evaluate the interaction between the three-dimensional high-speed flow and the heat exchanger. The characterization of these devices is usually performed in custom wind tunnels. In addition, it can be done through numerical simulations that include the solution of the fluid equations in the flow field and a conjugate thermal problem. The benefit of using numerical methods, once validated, is that it allows a complete and computationally affordable analysis of the aerothermal performance of the SACOC. This work includes a comparison between numerical and experimental results in terms of pressures and temperatures to achieve a complete characterization, thus demonstrating the capability of the numerical model to obtain accurate results and allowing a better understanding of the physical phenomenon., This project has received funding from Clean Sky 2 Joint Undertaking under the European Union s Horizon 2020 research and innovation programme under grant agreement No 831977 Aerodynamic upgrade of Surface Air-Cooled Oil Coolers (SACOC). Leo M. González acknowledges the financial support from the Spanish Ministry of Science, Innovation and Universities (MCIU) under grant RTI2018-096791-BC21 Hidrodinámica de elementos de amortiguamiento del movimiento de aerogeneradores flotantes. A. Felgueroso is supported through the Programa de Apoyo para la Investigación 𝑦 Desarrollo of the Universitat Politècnica de València under grant PAID-01-20 n◦ 21589.