Pasar al contenido principal

TECNOLOGIAS DE VISION HABILITANTES PARA TRANSPORTE INTELIGENTE INTEGRADO

RTI2018-097088-B-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

VersaTile Convolutional Neural Network Mapping on FPGAs

  • Muñío-Gracia, A.
  • Fernández-Berni, J.
  • Carmona-Galán, R.
  • Rodríguez-Vázquez, Ángel
Convolutional Neural Networks (ConvNets) are directed acyclic graphs with node transitions determined by a set of configuration parameters. In this paper, we describe a dynamically configurable hardware architecture that enables data allocation strategy adjustment according to ConvNets layer characteristics. The proposed flexible scheduling solution allows the accelerator design to be portable across various scenarios of computation and memory resources availability. For instance, FPGA block-RAM resources can be properly balanced for optimization of data distribution and minimization of off-chip memory accesses. We explore the selection of tailored scheduling policies that translate into efficient on-chip data reuse and hence lower energy consumption. The system can autonomously adapt its behavior with no need of platform reconfiguration nor user supervision. Experimental results are presented and compared with state-of-the-art accelerators., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A customizable thermographic imaging system for medical image acquisition and processing

  • Leñero-Bardallo, J. A.
  • Rosa-Vidal, Rafael de la
  • Padial-Allué, Rubén
  • Ceballos-Cáceres, J.
  • Rodríguez-Vázquez, Ángel
  • Bernabeu-Wittel, José
A custom system has been developed for medical image acquisition and processing in both the visible and the infrared (IR) bands. Unlike some non-customizable commercial devices, this system can easily be adapted to different application scenarios by adding new peripherals and/or custom image processing algorithms. Portable, autonomous, and easy to use, it offers immediate results at the moment of examination and has a competitive cost. The system comprises a Single Board Computer (SBC) controlling a group of sensors and peripherals. The hardware implementation, described in detail in this paper, was adapted for two different application scenarios. First, the system was employed to differentiate between different kinds of vascular anomalies. The clinical results obtained are reported. The device was then redesigned to automatically detect people with high body temperatures in public environments. The system’s real-time image processing capabilities in both scenarios are demonstrated. Specific algorithms were implemented by the authors for each case study., Ayudas a Proyectos de I+D+I Programa Operativo Fondo Europeo de Desarrollo Regional (FEDER) (Grant Number: US-1264940). Proyecto Singular de Transferencia del Conocimiento: Ecosistema Innovador con Inteligencia Artifial para Andalucía 2025 (Grant Number: CEI-07). 10.13039/501100003329-Spanish Government Ministerio de Economía y Competitividad (MINECO) and European Regional Development Fund (ERDF/FEDER) (Grant Number: RTI2018-097088-B-C31). 10.13039/100007297-Office of Naval Research (ONR) Naval International Cooperative Opportunities in Science and Technology (NICOP) Program (Grant Number: N00014-19-1-2156). EU H2020 Marie Skłodowska-Curie Actions (MSCA) ACHIEVE-ITN (Grant Number: 765866), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A mobile platform for movement tracking based on a fast-execution-time optical-flow algorithm

  • Rosa-Vidal, Rafael de la
  • Leñero-Bardallo, J. A.
  • Guerrero-Rodríguez, José M.
  • Rodríguez-Vázquez, Ángel
A multi-purpose mechanical platform to track moving objects in three-dimensional space has been developed. It is composed of one main microcontroller board that processes all system data, two cameras, three motors, and one secondary microcontroller board to position a platform with three degrees of freedom. The system computes the optical flow and moves the cameras accordingly, tracking motion within the visual scene. The platform operates autonomously. To the best of our knowledge, there are no similar systems reported with low-resolution image sensors and low-cost microcontrollers. Existing solutions rely on personal computers and advanced FPGAs to process image data. This article concludes that the optical flow operation is efficient even using an image sensor with very low resolution. Thus, the system complexity and image data processing are alleviated significantly. The platform can be easily adapted to different application scenarios by adding new peripherals, sensors, or image processing algorithms. A detailed description of the system design and experimental results are provided., Proyectos de I+D+i de entidades publicas-Convocatoria 2020 through project P20_01206 (VERSO). Ayudas a Proyectos de I+D+I Programa Operativo FEDER through the Project SPADARCH (Grant Number: US-1264940). Proyecto Singular de Transferencia del Conocimiento: Ecosistema Innovador con Inteligencia Artificial para Andalucía 2025 RIS3 (Grant Number: CEI-07). 10.13039/501100008530-Spanish Government MINECO and European Regional Development Fund (ERDF/FEDER) (Grant Number: RTI2018-097088-B-C31). 10.13039/100000006-ONR (Grant Number: ONR NICOP N00014-19-1-2156). Spanish Government through Ayudas para la Formación del Profesorado Universitario (FPU) (Grant Number: FPU 01561)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An efficient TDC using a dual-mode resource-saving method evaluated in a 28-nm FPGA

  • Parsakordasiabi, Mojtaba
  • Vornicu, Ion
  • Rodríguez-Vázquez, Ángel
  • Carmona-Galán, R.
FPGA-based time-to-digital converters (TDCs) are required to be accurate, linear, and fast, while at the same time employing a reduced number of resources. Pushing these requirements to the limit is challenging, although it is constantly required by many applications. This article presents a dual-mode tapped-delay-line (TDL)—propagating 1’s and 0’s in alternating measurement cycles—architecture for a field-programmable gate array (FPGA)-based TDC that complies with the mentioned specifications. The dead-time of the proposed TDC is reduced to one system clock cycle by using a toggling input stage and a dual-mode counter-based encoder. To improve the TDC linearity, the TDL sampling sequence is tuned separately for each operating mode. The presented architecture employs a low-resources dual-mode combinatory encoder of one- and zero-counters to remove the bubbles and cover both operating modes. A dual-mode bin-width calibration has been carried out to improve the TDC performance in each mode. The proposed architecture has been implemented on a Xilinx Artix-7 FPGA. Experimental results have shown a differential nonlinearity (DNL) within [−0.71 1.05] least significant bit (LSB) and an integral nonlinearity (INL) within [−0.85 0.86] LSB for the propagation of 1’s. DNL and INL are within [−0.73 1.06] LSB and [−1.17 0.04] LSB, respectively, for the propagation of 0’s. The LSB size is 22.1 ps and the TDC precision is 22.35 ps. A comparison with recently published state-of-the-art FPGA-based TDCs is provided at the end of the article., EU H2020 MSCA through Project ACHIEVE-ITN (Grant Number: 765866). Spanish MINECO and European Region Development Fund (ERDF/FEDER) (Grant Number: RTI2018-097088-B-C31). 10.13039/100000006-U.S. Office of Naval Research (Grant Number: N00014-19-1-2156)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Architecture-level optimization on digital silicon photomultipliers for medical imaging

  • Bandi, Franco
  • Ilisie, Víctor
  • Vornicu, Ion
  • Carmona-Galán, R.
  • Benlloch Baviera, José María
  • Rodríguez-Vázquez, Ángel
This article belongs to the Section Physical Sensors., Silicon photomultipliers (SiPMs) are arrays of single-photon avalanche diodes (SPADs) connected in parallel. Analog silicon photomultipliers are built in custom technologies optimized for detection efficiency. Digital silicon photomultipliers are built in CMOS technology. Although CMOS SPADs are less sensitive, they can incorporate additional functionality at the sensor plane, which is required in some applications for an accurate detection in terms of energy, timestamp, and spatial location. This additional circuitry comprises active quenching and recharge circuits, pulse combining and counting logic, and a time-to-digital converter. This, together with the disconnection of defective SPADs, results in a reduction of the light-sensitive area. In addition, the pile-up of pulses, in space and in time, translates into additional efficiency losses that are inherent to digital SiPMs. The design of digital SiPMs must include some sort of optimization of the pixel architecture in order to maximize sensitivity. In this paper, we identify the most relevant variables that determine the influence of SPAD yield, fill factor loss, and spatial and temporal pile-up in the photon detection efficiency. An optimum of 8% is found for different pixel sizes. The potential benefits of molecular imaging of these optimized and small-sized pixels with independent timestamping capabilities are also analyzed., This work was supported by EU H2020 MSCA through Project ACHIEVE-ITN (Grant No 765866), by the Spanish MINECO and European Region Development Fund (ERDF/FEDER) through Project RTI2018-097088-B-C31, by the US Office of Naval Research through Grant No. N00014-19-1-2156, by the European Research Council through Grant No. 695536, and by Generalitat Valenciana APOSTD/2019/086., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermography as a method for bedside monitoring of infantile hemangiomas

  • Leñero-Bardallo, J. A.
  • Acha Piñero, Begoña
  • Serrano-Gotarredona, Carmen
  • Perez-Carrasco, J. A.
  • Ortiz-Álvarez, Juan
  • Bernabeu-Wittel, José
This article belongs to the Special Issue Biophotonics and Imaging for Cancer Screening, Diagnosis and Treatment Monitoring., [Simple Summary] Infantile hemangiomas are the most frequent vascular tumors in infants. Conventional diagnosis relies on visual observation of vascular anomalies and ancillary techniques such as Doppler ultrasonography or magnetic resonance. These diagnostic methods are not straightforward and may require trained operators. Children are usually apprehensive of them because they may require the use of gels, general anesthesia, and contact with their skin. As temperature variations induced by a hemangioma can be measured very accurately, we explored thermographic imaging as an alternative tool for clinically monitoring hemangioma extensions before and during treatment. We found a correspondence between the satisfactory evolution of hemangiomas during treatment, their extension, and their temperature., Infantile hemangiomas occur in 3 to 10% of infants. To predict the clinical course and counsel on treatment, it is crucial to accurately determine the hemangiomas’ extension, volume, and location. However, this can represent a challenge because hemangiomas may present irregular patterns or be covered by hair, or their depth may be difficult to estimate. Diagnosis is commonly made by clinical inspection and palpation, with physicians basing their diagnoses on visual characteristics such as area, texture, and color. Doppler ultrasonography or magnetic resonance imaging are normally used to estimate depth or to confirm difficult assessments. This paper presents an alternative diagnosis tool—thermography—as a useful, immediate means of carrying out accurate hemangioma examinations. We conducted a study analyzing infantile hemangiomas with a custom thermographic system. In the first phase of the study, 55 hemangiomas of previously diagnosed patients were analyzed with a thermal camera over several sessions. An average temperature variation before and after treatment of −0.19 °C was measured. In the second phase, we selected nine patients and assessed their evolution over nine months by analyzing their thermographic images and implementing dedicated image processing algorithms. In all cases, we found that the thermal image analysis concurred with the independent diagnoses of two dermatologists. We concluded that a higher temperature inside the tumor in the follow-up was indicative of an undesirable evolution., This research was funded by: the Andalusian Regional Government (Department of Economic Transformation, Industry, Knowledge and Universities), through call 2020 P20_01206 (VERSO) for public entity RDI projects; Grant number AT21_00096 for complementary RDI and knowledge transfer activities; the Spanish Government’s ‘Retos’ State Research Plan grant number RTI2018-097088-B-C31; the Office of Naval Research Global, grant number N00014-19-1-2156; the Spanish Government’s “Proyectos de Generación de Conocimiento 2021” State Research Plan grant number PID2021-127871OB-I00 and Fondo Europeo de Desarrollo Regional (FEDER) y Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía FEDER-US project US-1381640., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Centroid estimation method with sub-pixel resolution for event-based sun sensors

  • Farian, Łukasz
  • Fernández-Peramo, Pablo
  • Leñero-Bardallo, J. A.
Resumen del trabajo presentado a la 17th Conference on Ph.D Research in Microelectronics and Electronics (PRIME), celebrada en Sardinia (Italia) del 12 al 15 de junio de 2022., A new method to obtain sub-pixel measurement resolution for sun sensors based on spiking pixels is presented. The procedure is intended to increase the resolution of the estimated angle. The method uses the profile of incident light to estimate the angle of the vector towards the sun with sub-pixel resolution. Read-out time, data bandwidth, and spatial resolution are improved. Experimental results are provided. The proposed method can be implemented in any asynchronous sun sensor operating in Time-to-First-Spike (TFS) mode., This work was supported by Proyectos de I+D+i de entidades públicas – Convocatoria 2020 P20_01206 (VERSO), by Ayudas a Proyectos de I+D+I Programa Operativo FEDER through Project US-1264940 (SPADARCH), by Spanish Government MINECO and European Regional Development Fund, (ERDF/FEDER) through Project RTI2018-097088-B-C31, and by ONR grant ONR NICOP N00014-19-1-2156., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

On the implementation of in-pixel controlled diodes with sensing and energy harvesting capabilities

  • Gómez Merchán, Rubén
  • Rosa, José M. de la
  • Leñero-Bardallo, J. A.
  • Rodríguez-Vázquez, Ángel
Trabajo presentado a la 17th Conference on Ph.D Research in Microelectronics and Electronics (PRIME), celebrada en Sardinia (Italia) del 12 al 15 de junio de 2022., This work was supported by Junta de Andalucia (Consejeria de Transformacion Economica, Industria, Conocimiento y Universidades) by call Proyectos de I+D+i de entidades publicas – Convocatoria 2020 P20 01206 (VERSO); by Ayudas a Proyectos de I+D+I Programa Operativo FEDER through Project US-1264940 (SPADARCH); by Spanish Government MINECO and European Regional Development Fund; (ERDF/FEDER) through Project RTI2018-097088-B-C31; and by ONR grant ONR NICOP N00014-19-1-2156. Ruben Gomez-Merchan and R. de la Rosa Vidal were sponsored by the Spanish Government through Ayudas para la Formacion del Profesorado Universitario (FPU) under Grants FPU19/03410 and FPU20/01561., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

An Architecture for On-Chip Face Recognition in a Compressive Image Sensor

  • Khan, Amir
  • Fernández-Berni, J.
  • Carmona-Galán, R.
Compressive sensing has been widely explored for image reconstruction; however, compressed samples themselves contain relevant signal information and, hence, could be exploited for inference purposes. Many previous studies investigated image recognition on compressed samples, but few of them considered on-chip realization. In this study, an architecture for face recognition that exploits compressed samples was investigated. We found that by using a linear support-vector-machine (SVM) classifier with such samples as input, faces can be recognized with higher performance than in previous works for the level of compression expected in a system-on-chip (SoC) implementation. To compare our results with those of existing works, a figure of merit is proposed. Three image datasets were analyzed to cover diverse aspects, such as variation in illumination, different poses, aging effect, and changing backgrounds. The compression scheme shows robustness under this variety of input signals. A pseudo-diagonal measurement matrix and an architecture suited for in-sensor on-chip implementation are proposed. The resulting inference framework is suitable for an SoC implementation encompassing an image sensor to perform CS acquisition and a DSP to run the SVM., Amir Khan’s PhD is funded by the Spanish MICINN and the European Social Fund (ESF/FSE) through grant PRE2019-088478. This work has been supported by the Spanish MICINN and the European Region Development Fund (ERDF/FEDER) through Project RTI2018-097088-B-C31, by EU H2020 MSCA through Project ACHIEVE-ITN (Grant No. 765866), and by the US Office of Naval Research through Grant No. N00014-19-1-2156., Peer reviewed