Pasar al contenido principal

OPTIMIZACION TOPOLOGICA DE ESTRUCTURAS SUJETAS A INTERACCION FLUIDO-ESTRUCTURA

RTI2018-098276-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CENTRE INTERNACIONAL DE METODES NUMERICS A L ENGINYERIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photoactive Zr and Ti Metal-Organic-Frameworks for SolidState Solar Cells

  • Melillo, Arianna
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Ferrer Ribera, Rosa Belén
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • García-Aboal, Rocío
[EN] Solid-state photovoltaic cells based on robust metal-organic frameworks (MOFs), MIL-125(Ti), MIL-125(Ti)-NH2, UiO-67, Ru(bpy)(2)-UiO-67, (bpy 2,2'-bipyridine) as active components and spiro-MeOTAD (MeOTAD 2,2',7,7'-tetrakis[N,N-di(p-methoxyphenyl)amino]-9,9 '-spirobifluorene) as hole transporting layer have been prepared., The photovoltaic response of this material increases in the presence of bathochromic -NH2 groups on the linker or Ru (II) polypyridyl complexes light harvester. These results show that the strategies typically employed in photocatalysis to enhance the photocatalytic activity of MOFs can also be applied in the field of photovoltaic devices., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-98276-CO2-1) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. S.N. thanks financial support by the Ministerio de Ciencia, Innovacion y Universidades (RTI 2018-099482-A-I00 project) and Agencia Valenciana de la Innovacion (AVI-GVA, Carboagua project, INNEST/2020/111).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A stabilized mixed three-field formulation for stress accurate analysis including the incompressible limit in finite strain solid dynamics

  • Castañar Pérez, Inocencio|||0000-0003-4139-9380
  • Codina, Ramon|||0000-0002-7412-778X
  • Baiges Aznar, Joan|||0000-0002-3940-5887
This is the peer reviewed version of the following article: [Castañar, I, Codina, R, Baiges, J. A stabilized mixed three-field formulation for stress accurate analysis including the incompressible limit in finite strain solid dynamics. Int J Numer Methods Eng. 2023; 1- 26. doi: 10.1002/nme.7213], which has been published in final form at https://doi.org/10.1002/nme.7213. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., In this work a new methodology for finite strain solid dynamics problems for stress accurate analysis including the incompressible limit is presented. In previous works, the authors have presented the stabilized mixed displacement/pressure formulation to deal with the incompressibility constraint in finite strain solid dynamics. To this end, the momentum equation is complemented with a constitutive law for the pressure which emerges from the deviatoric/volumetric decomposition of the strain energy function for any hyperelastic material model. The incompressible limit is attained automatically depending on the material bulk modulus. This work exploits the concept of mixed methods to formulate stable displacement/pressure/deviatoric stress finite elements. The final goal is to design a finite element technology able to tackle simultaneously problems which may involve incompressible behavior together with a high degree of accuracy of the stress field. The variational multi-scale stabilization technique and, in particular, the orthogonal subgrid scale method allows the use of equal-order interpolations. These stabilization procedures lead to discrete problems which are fully stable, free of volumetric locking, stress oscillations and pressure fluctuations. Numerical benchmarks show that the results obtained compare very favorably with those obtained with the corresponding stabilized mixed displacement/pressure formulation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A stabilized mixed finite element approximation for incompressible finite strain solid dynamics using a total Lagrangian formulation

  • Castañar Pérez, Inocencio|||0000-0003-4139-9380
  • Baiges Aznar, Joan|||0000-0002-3940-5887
  • Codina, Ramon|||0000-0002-7412-778X
In this work a new methodology for both the nearly and fully incompressible transient finite strain solid mechanics problem is presented. To this end, the momentum equation is complemented with a constitutive law for the pressure which emerges from the deviatoric/volumetric decomposition of the strain energy function for any hyperelastic material model. The incompressible limit is attained automatically depending on the material bulk modulus. The system is stabilized by means of the Variational Multiscale-Orthogonal Subgrid Scale method based on the decomposition of the unknowns into resolvable and subgrid scales in order to prevent pressure fluctuations. Several numerical examples are presented to assess the robustness and applicability of the proposed formulation., Inocencio Castañar gratefully acknowledges the support received from the Agència de Gestió d’Ajut i de Recerca through the predoctoral FI grant 2019-FI-B-0649. J. Baiges gratefully acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. R. Codina gratefully acknowledges the support received through the ICREA Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Finite element approximation of wave problems with correcting terms based on training artificial neural networks with fine solutions

  • Fabra Ruiz, Arnau|||0000-0001-5950-3751
  • Baiges Aznar, Joan|||0000-0002-3940-5887
  • Codina, Ramon|||0000-0002-7412-778X
In this paper we present a general idea to correct coarse models by introducing a correcting term designed from fine solutions that can be then applied to situations in which a fine solution is not available. We apply this idea to the wave equation in both the time domain and the frequency domain. This correcting term is computed and trained by making use of learning algorithms, such as the least squares model or a model constructed from an artificial neural network. The performance of the method is tested through different acoustic numerical examples, where the fine solutions are characterized for having a finer discretization either in time or in space., A. Fabra acknowledges the support obtained from the Spanish Government through the FPI grant RTI2018-098276-B-I00. J. Baiges gratefully acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. R. Codina gratefully acknowledges the support received through the ICREA Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government. CIMNE is a recipient of a “Severo Ochoa Programme for Centers of Excellence in R&D” grant (CEX2018-000797-S) by the Spanish Ministry of Economy and Competitiveness., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Approximation of acoustic black holes with finite element mixed formulations and artificial neural network correction terms

  • Fabra Ruiz, Arnau|||0000-0001-5950-3751
  • Guasch Fortuny, Oriol
  • Baiges Aznar, Joan|||0000-0002-3940-5887
  • Codina, Ramon|||0000-0002-7412-778X
Wave propagation in elastodynamic problems in solids often requires fine computational meshes. In this work we propose to combine stabilized finite element methods (FEM) with an artificial neural network (ANN) correction term to solve such problems on coarse meshes. Irreducible and mixed velocity–stress formulations for the linear elasticity problem in the frequency domain are first presented and discretized using a variational multiscale FEM. A non-linear ANN correction term is then designed to be added to the FEM algebraic matrix system and produce accurate solutions when solving elastodynamics on coarse meshes. As a case study we consider acoustic black holes (ABHs) on structural elements with high aspect ratios such as beams and plates. ABHs are traps for flexural waves based on reducing the structural thickness according to a power-law profile at the end of a beam, or within a two-dimensional circular indentation in a plate. For the ABH to function properly, the thickness at the termination/center must be very small, which demands very fine computational meshes. The proposed strategy combining the stabilized FEM with the ANN correction allows us to accurately simulate the response of ABHs on coarse meshes for values of the ABH order and residual thickness outside the training test, as well as for different excitation frequencies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A VMS–based fractional step technique for the compressible Navier–Stokes equations using conservative variables

  • Parada Bustelo, Samuel|||0000-0003-0185-350X
  • Codina, Ramon|||0000-0002-7412-778X
  • Baiges Aznar, Joan|||0000-0002-3940-5887
In this paper we address the compressible Navier–Stokes equations written in the so-called conservative formulation. In particular, we focus on the possibility of uncoupling the computation of the problem unknowns, namely, density, linear momentum and total energy, a technique usually labeled as fractional step method, which allows to reduce the associated computational cost. The proposed methodology is a finite-element solver supplemented with a stabilization technique within the Variational Multi-Scale framework. In this regard, we consider orthogonal and dynamic definitions for the subscales. This discretization in space shows an adequate stability, permitting in particular the use of equal interpolation for all variables in play. However, we complement it with a shock-capturing operator in order to solve problems involving shocks. Several representative benchmark flow simulations are performed, which demonstrate the suitability of the proposed algorithm for a vast range of regimes., Samuel Parada gratefully acknowledges the support received from the Agència de Gestió d'Ajuts Universitaris i de Recerca through the predoctoral FI grant 2019-FI-B-00607. Joan Baiges gratefully acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. Ramon Codina gratefully acknowledges the support received from the ICREA Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government. CIMNE is a recipient of a “Severo Ochoa Programme for Centers of Excellence in R&D” grant (CEX2018-000797-S) by the Spanish Government., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Development of an algebraic fractional step scheme for the primitive formulation of the compressible Navier-Stokes equations

  • Parada Bustelo, Samuel|||0000-0003-0185-350X
  • Codina, Ramon|||0000-0002-7412-778X
  • Baiges Aznar, Joan|||0000-0002-3940-5887
In this work we address the compressible Navier-Stokes equations written in the so-called primitive formulation. The proposed methodology is a finite-element solver based on a fractional step scheme in time, which allows to uncouple the calculation of the problem unknowns providing important savings in computational cost. In addition, we include a stabilization technique within the Variational Multi-Scale framework and, in particular, we consider orthogonal and dynamic definitions for the subscales. In order to overcome any wave reflections which may arise in aeroacoustic simulations at the low compressibility regime, we present a method for enforcing boundary conditions based on a combination of a zero order non-reflecting condition plus the weak imposition of Dirichlet boundary conditions over the external contours. Several representative benchmark flow simulations are performed, which demonstrate the suitability of the proposed algorithm for the subsonic regime., Samuel Parada gratefully acknowledges the support received from the Agència de Gestió d'Ajuts Universitaris i de Recerca through the predoctoral FI grant 2019-FI-B-00607. Joan Baiges gratefully acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. Ramon Codina gratefully acknowledges the support received from the ICREA Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government. CIMNE is a recipient of a “Severo Ochoa Programme for Centers of Excellence in R&D” grant (CEX2018-000797-S) by the Spanish Ministry of Economy and Competitiveness., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Mixed stabilized finite element methods in linear elasticity for the velocity–stress equations in the time and the frequency domains

  • Fabra Ruiz, Arnau|||0000-0001-5950-3751
  • Codina, Ramon|||0000-0002-7412-778X
In this work we present stabilized finite element methods for the mixed velocity–stress elasticity equations and for its irreducible velocity form. This is done both for the time and frequency domains, the latter being obtained by assuming a harmonic behavior in time. Stabilization methods that belong to the computational framework of the Variational Multi-Scale formulation are used. It is shown that the adequate selection of the algorithmic parameters on which the formulation depends allows one to switch from the primal to the dual functional framework. The performance of the method is tested through several numerical examples, one of which includes a convergence study., R. Codina gratefully acknowledges the support received through the ICREA Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government. CIMNE is a recipient of a “Severo Ochoa Programme for Centers of Excellence in R&D” grant (CEX2018-000797-S) by the Spanish Ministry of Economy and Competitiveness ., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A fractional step method for computational aeroacoustics using weak imposition of Dirichlet boundary conditions

  • Parada Bustelo, Samuel|||0000-0003-0185-350X
  • Baiges Aznar, Joan|||0000-0002-3940-5887
  • Codina, Ramon|||0000-0002-7412-778X
In this work we consider the approximation of the isentropic Navier–Stokes equations. The model we present is capable of taking into account acoustic and flow scales at once. After space and time discretizations have been chosen, it is very convenient from the computational point of view to design fractional step schemes in time so as to permit a segregated calculation of the problem unknowns. While these segregation schemes are well established for incompressible flows, much less is known in the case of isentropic flows. We discuss this issue in this article and, furthermore, we study the way to weakly impose Dirichlet boundary conditions via Nitsche’s method. In order to avoid spurious reflections of the acoustic waves, Nitsche’s method is combined with a non-reflecting boundary condition. Employing a purely algebraic approach to discuss the problem, some of the boundary contributions are treated explicitly and we explain how these are included in the different steps of the final algorithm. Numerical evidence shows that this explicit treatment does not have a significant impact on the convergence rate of the resulting time integration scheme. The equations of the formulation are solved using a subgrid scale technique based on a term-by-term stabilization., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A finite element reduced-order model based on adaptive mesh refinement and artificial neural networks

  • Baiges Aznar, Joan|||0000-0002-3940-5887
  • Codina, Ramon|||0000-0002-7412-778X
  • Castañar Pérez, Inocencio|||0000-0003-4139-9380
  • Castillo, Ernesto
This is the accepted version of the following article: [ Baiges, J, Codina, R, Castañar, I, Castillo, E. A finite element reduced‐order model based on adaptive mesh refinement and artificial neural networks. Int J Numer Methods Eng. 2020; 121: 588– 601. https://doi.org/10.1002/nme.6235], which has been published in final form at https://onlinelibrary.wiley.com/doi/abs/10.1002/nme.6235., In this work, a reduced-order model based on adaptive finite element meshes and a correction term obtained by using an artificial neural network (FAN-ROM) is presented. The idea is to run a high-fidelity simulation by using an adaptively refined finite element mesh and compare the results obtained with those of a coarse mesh finite element model. From this comparison, a correction forcing term can be computed for each training configuration. A model for the correction term is built by using an artificial neural network, and the final reduced-order model is obtained by putting together the coarse mesh finite element model, plus the artificial neural network model for the correction forcing term. The methodology is applied to nonlinear solid mechanics problems, transient quasi-incompressible flows, and a fluid-structure interaction problem. The results of the numerical examples show that the FAN-ROM is capable of improving the simulation results obtained in coarse finite element meshes at a reduced computational cost., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical simulation of Fluid–Structure Interaction problems with viscoelastic fluids using a log-conformation reformulation

  • Moreno Martínez, Laura
  • Castañar Pérez, Inocencio|||0000-0003-4139-9380
  • Codina, Ramon|||0000-0002-7412-778X
  • Baiges Aznar, Joan|||0000-0002-3940-5887
  • Cattoni, Domingo
In this paper the numerical simulation of the interaction between Oldroyd-B viscoelastic fluid flows and hyperelastic solids is approached. The algorithm employed is a classical block-iterative scheme, in which the solid and the fluid mechanics problems are solved sequentially. A Galerkin finite element approach has been employed for the numerical approximation of the solid, while the flow equations are approximated using a stabilized finite element method based on the Variational Multi-Scale approach to overcome the instabilities of the Galerkin method. To be able to deal with flows with dominant elasticity, a log-conformation reformulation of the constitutive equation can be employed; here this approach is extended to Fluid–Structure Interaction problems. Several numerical examples are presented and discussed to assess the robustness of the proposed scheme and its applicability to problems with viscoelastic fluids in which elasticity is dominant interacting with hyperelastic solids., L. Moreno acknowledges the support received from the project Nemesis, LARE_BIRD2020_01 (id: 33593). I. Castañar gratefully acknowledges the support received from the Agència de Gestió d’Ajuts i de Recerca through the predoctoral FI grant 2019-FI-B-00649. R. Codina gratefully acknowledges the support received through the ICREA, Spain Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government. CIMNE is a recipient of a “Severo Ochoa Programme for Centers of Excellence in R&D” grant (CEX2018-000797-S) by the Spanish Ministry of Economy and Competitiveness ., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical simulation of non-isothermal viscoelastic fluid flows using a VMS stabilized finite element formulation

  • Moreno Martínez, Laura
  • Codina, Ramon|||0000-0002-7412-778X
  • Baiges Aznar, Joan|||0000-0002-3940-5887
The effect of temperature in viscoelastic fluid flows is studied applying a stabilized finite element formulation based on both a standard and a log-conformation reformulation (LCR), and the Variational Multiscale (VMS) method as stabilization technique. The log-conformation reformulation turns out to be crucial to solve the cases with a high Weissenberg number. Regarding temperature coupling, a two-way coupling strategy is employed: on the one hand, the dependence of viscoelastic fluid parameters on temperature is established, together with the addition of a new term to the energy equation which takes into account the stress work. The formulations and the iterative algorithms are validated in the well-known flow past a cylinder benchmark. Besides, the extension 1:3 case is studied, in which several scenarios are explored varying the values of the main dimensionless numbers that characterize the problem to see how the flow pattern and temperature distribution change along the channel., Laura Moreno acknowledges the support received from the Spanish Government through a predoctoral FPI Grant. Ramon Codina acknowledges the support received from the ICREA Acadèmia Research Program of the Catalan Government. Joan Baiges acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. This work is partially funded through the TOP-FSI project, Ref. RTI2018-098276-B-I00 of the Spanish Government ., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Topology optimization of incompressible structures subject to fluid–structure interaction

  • Castañar Pérez, Inocencio|||0000-0003-4139-9380
  • Baiges Aznar, Joan|||0000-0002-3940-5887
  • Codina, Ramon|||0000-0002-7412-778X
In this work, an algorithm for topology optimization of incompressible structures is proposed, in both small and finite strain assumptions and in which the loads come from the interaction with a surrounding fluid. The algorithm considers a classical block-iterative scheme, in which the solid and the fluid mechanics problems are solved sequentially to simulate the interaction between them. Several stabilized mixed finite element formulations based on the Variational Multi-Scale approach are considered to be capable of tackling the incompressible limit for the numerical approximation of the solid. The fluid is considered as an incompressible Newtonian fluid flow which is combined with an Arbitrary-Lagrangian Eulerian formulation to account for the moving part of the domain. Several numerical examples are presented and discussed to assess the robustness of the proposed algorithm and its applicability to the topology optimization of incompressible elastic solids subjected to Newtonian incompressible fluid loads., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A posteriori error estimates in a finite element VMS-based reduced order model for the incompressible Navier-Stokes equations

  • Codina, Ramon|||0000-0002-7412-778X
  • Reyes, Ricardo|||0000-0003-0140-9564
  • Baiges Aznar, Joan|||0000-0002-3940-5887
In this paper we present an a posteriori error estimate for a reduced order model (ROM) for the incompressible Navier-Stokes equations that is based on the fact that the full order model is a finite element (FE) approximation. Both this FE approximation and the ROM are stabilized by means of a variational multi-scale (VMS) strategy, in which the unknowns are split into FE scales and sub-grid scales (SGS), the latter being modeled in terms of the former. The SGS, when properly scaled, provide directly the a posteriori error estimate, both for the ROM and for the FE approximation., R. Codina acknowledges the support received from the ICREA Acadèmia Research Program, from the Catalan Government. R. Reyes acknowledges the scholarship received from COLCIENCIAS, from the Colombian Government. J. Baiges acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A stabilized mixed finite element approximation for incompressible finite strain solid dynamics using a total Lagrangian formulation

  • Castañar Pérez, Inocencio
  • Baiges Aznar, Joan
  • Codina, Ramon
In this work a new methodology for both the nearly and fully incompressible transient finite strain solid mechanics problem is presented. To this end, the momentum equation is complemented with a constitutive law for the pressure which emerges from the deviatoric/volumetric decomposition of the strain energy function for any hyperelastic material model. The incompressible limit is attained automatically depending on the material bulk modulus. The system is stabilized by means of the Variational Multiscale-Orthogonal Subgrid Scale method based on the decomposition of the unknowns into resolvable and subgrid scales in order to prevent pressure fluctuations. Several numerical examples are presented to assess the robustness and applicability of the proposed formulation., Inocencio Castañar gratefully acknowledges the support received from the Agència de Gestió d’Ajut i de Recerca through the predoctoral FI grant 2019-FI-B-0649. J. Baiges gratefully acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. R. Codina gratefully acknowledges the support received through the ICREA Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Topology optimization of incompressible structures subject to fluid–structure interaction

  • Castañar Pérez, Inocencio
  • Baiges Aznar, Joan
  • Codina, Ramon
In this work, an algorithm for topology optimization of incompressible structures is proposed, in both small and finite strain assumptions and in which the loads come from the interaction with a surrounding fluid. The algorithm considers a classical block-iterative scheme, in which the solid and the fluid mechanics problems are solved sequentially to simulate the interaction between them. Several stabilized mixed finite element formulations based on the Variational Multi-Scale approach are considered to be capable of tackling the incompressible limit for the numerical approximation of the solid. The fluid is considered as an incompressible Newtonian fluid flow which is combined with an Arbitrary-Lagrangian Eulerian formulation to account for the moving part of the domain. Several numerical examples are presented and discussed to assess the robustness of the proposed algorithm and its applicability to the topology optimization of incompressible elastic solids subjected to Newtonian incompressible fluid loads., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical simulation of Fluid–Structure Interaction problems with viscoelastic fluids using a log-conformation reformulation

  • Moreno Martínez, Laura
  • Castañar Pérez, Inocencio
  • Codina, Ramon
  • Baiges Aznar, Joan
  • Cattoni, Domingo
In this paper the numerical simulation of the interaction between Oldroyd-B viscoelastic fluid flows and hyperelastic solids is approached. The algorithm employed is a classical block-iterative scheme, in which the solid and the fluid mechanics problems are solved sequentially. A Galerkin finite element approach has been employed for the numerical approximation of the solid, while the flow equations are approximated using a stabilized finite element method based on the Variational Multi-Scale approach to overcome the instabilities of the Galerkin method. To be able to deal with flows with dominant elasticity, a log-conformation reformulation of the constitutive equation can be employed; here this approach is extended to Fluid–Structure Interaction problems. Several numerical examples are presented and discussed to assess the robustness of the proposed scheme and its applicability to problems with viscoelastic fluids in which elasticity is dominant interacting with hyperelastic solids., L. Moreno acknowledges the support received from the project Nemesis, LARE_BIRD2020_01 (id: 33593). I. Castañar gratefully acknowledges the support received from the Agència de Gestió d’Ajuts i de Recerca through the predoctoral FI grant 2019-FI-B-00649. R. Codina gratefully acknowledges the support received through the ICREA, Spain Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government. CIMNE is a recipient of a “Severo Ochoa Programme for Centers of Excellence in R&D” grant (CEX2018-000797-S) by the Spanish Ministry of Economy and Competitiveness ., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A fractional step method for computational aeroacoustics using weak imposition of Dirichlet boundary conditions

  • Parada Bustelo, Samuel
  • Baiges Aznar, Joan
  • Codina, Ramon
In this work we consider the approximation of the isentropic Navier–Stokes equations. The model we present is capable of taking into account acoustic and flow scales at once. After space and time discretizations have been chosen, it is very convenient from the computational point of view to design fractional step schemes in time so as to permit a segregated calculation of the problem unknowns. While these segregation schemes are well established for incompressible flows, much less is known in the case of isentropic flows. We discuss this issue in this article and, furthermore, we study the way to weakly impose Dirichlet boundary conditions via Nitsche’s method. In order to avoid spurious reflections of the acoustic waves, Nitsche’s method is combined with a non-reflecting boundary condition. Employing a purely algebraic approach to discuss the problem, some of the boundary contributions are treated explicitly and we explain how these are included in the different steps of the final algorithm. Numerical evidence shows that this explicit treatment does not have a significant impact on the convergence rate of the resulting time integration scheme. The equations of the formulation are solved using a subgrid scale technique based on a term-by-term stabilization., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A finite element reduced-order model based on adaptive mesh refinement and artificial neural networks

  • Baiges Aznar, Joan
  • Codina, Ramon
  • Castañar Pérez, Inocencio
  • Castillo, Ernesto
This is the accepted version of the following article: [ Baiges, J, Codina, R, Castañar, I, Castillo, E. A finite element reduced‐order model based on adaptive mesh refinement and artificial neural networks. Int J Numer Methods Eng. 2020; 121: 588– 601. https://doi.org/10.1002/nme.6235], which has been published in final form at https://onlinelibrary.wiley.com/doi/abs/10.1002/nme.6235., In this work, a reduced-order model based on adaptive finite element meshes and a correction term obtained by using an artificial neural network (FAN-ROM) is presented. The idea is to run a high-fidelity simulation by using an adaptively refined finite element mesh and compare the results obtained with those of a coarse mesh finite element model. From this comparison, a correction forcing term can be computed for each training configuration. A model for the correction term is built by using an artificial neural network, and the final reduced-order model is obtained by putting together the coarse mesh finite element model, plus the artificial neural network model for the correction forcing term. The methodology is applied to nonlinear solid mechanics problems, transient quasi-incompressible flows, and a fluid-structure interaction problem. The results of the numerical examples show that the FAN-ROM is capable of improving the simulation results obtained in coarse finite element meshes at a reduced computational cost., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A stabilized mixed three-field formulation for stress accurate analysis including the incompressible limit in finite strain solid dynamics

  • Castañar Pérez, Inocencio
  • Codina, Ramon
  • Baiges Aznar, Joan
This is the peer reviewed version of the following article: [Castañar, I, Codina, R, Baiges, J. A stabilized mixed three-field formulation for stress accurate analysis including the incompressible limit in finite strain solid dynamics. Int J Numer Methods Eng. 2023; 1- 26. doi: 10.1002/nme.7213], which has been published in final form at https://doi.org/10.1002/nme.7213. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., In this work a new methodology for finite strain solid dynamics problems for stress accurate analysis including the incompressible limit is presented. In previous works, the authors have presented the stabilized mixed displacement/pressure formulation to deal with the incompressibility constraint in finite strain solid dynamics. To this end, the momentum equation is complemented with a constitutive law for the pressure which emerges from the deviatoric/volumetric decomposition of the strain energy function for any hyperelastic material model. The incompressible limit is attained automatically depending on the material bulk modulus. This work exploits the concept of mixed methods to formulate stable displacement/pressure/deviatoric stress finite elements. The final goal is to design a finite element technology able to tackle simultaneously problems which may involve incompressible behavior together with a high degree of accuracy of the stress field. The variational multi-scale stabilization technique and, in particular, the orthogonal subgrid scale method allows the use of equal-order interpolations. These stabilization procedures lead to discrete problems which are fully stable, free of volumetric locking, stress oscillations and pressure fluctuations. Numerical benchmarks show that the results obtained compare very favorably with those obtained with the corresponding stabilized mixed displacement/pressure formulation., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical simulation of non-isothermal viscoelastic fluid flows using a VMS stabilized finite element formulation

  • Moreno Martínez, Laura
  • Codina, Ramon
  • Baiges Aznar, Joan
The effect of temperature in viscoelastic fluid flows is studied applying a stabilized finite element formulation based on both a standard and a log-conformation reformulation (LCR), and the Variational Multiscale (VMS) method as stabilization technique. The log-conformation reformulation turns out to be crucial to solve the cases with a high Weissenberg number. Regarding temperature coupling, a two-way coupling strategy is employed: on the one hand, the dependence of viscoelastic fluid parameters on temperature is established, together with the addition of a new term to the energy equation which takes into account the stress work. The formulations and the iterative algorithms are validated in the well-known flow past a cylinder benchmark. Besides, the extension 1:3 case is studied, in which several scenarios are explored varying the values of the main dimensionless numbers that characterize the problem to see how the flow pattern and temperature distribution change along the channel., Laura Moreno acknowledges the support received from the Spanish Government through a predoctoral FPI Grant. Ramon Codina acknowledges the support received from the ICREA Acadèmia Research Program of the Catalan Government. Joan Baiges acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. This work is partially funded through the TOP-FSI project, Ref. RTI2018-098276-B-I00 of the Spanish Government ., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A posteriori error estimates in a finite element VMS-based reduced order model for the incompressible Navier-Stokes equations

  • Codina, Ramon
  • Reyes, Ricardo
  • Baiges Aznar, Joan
In this paper we present an a posteriori error estimate for a reduced order model (ROM) for the incompressible Navier-Stokes equations that is based on the fact that the full order model is a finite element (FE) approximation. Both this FE approximation and the ROM are stabilized by means of a variational multi-scale (VMS) strategy, in which the unknowns are split into FE scales and sub-grid scales (SGS), the latter being modeled in terms of the former. The SGS, when properly scaled, provide directly the a posteriori error estimate, both for the ROM and for the FE approximation., R. Codina acknowledges the support received from the ICREA Acadèmia Research Program, from the Catalan Government. R. Reyes acknowledges the scholarship received from COLCIENCIAS, from the Colombian Government. J. Baiges acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Approximation of acoustic black holes with finite element mixed formulations and artificial neural network correction terms

  • Fabra Ruiz, Arnau
  • Guasch Fortuny, Oriol
  • Baiges Aznar, Joan
  • Codina, Ramon
Wave propagation in elastodynamic problems in solids often requires fine computational meshes. In this work we propose to combine stabilized finite element methods (FEM) with an artificial neural network (ANN) correction term to solve such problems on coarse meshes. Irreducible and mixed velocity–stress formulations for the linear elasticity problem in the frequency domain are first presented and discretized using a variational multiscale FEM. A non-linear ANN correction term is then designed to be added to the FEM algebraic matrix system and produce accurate solutions when solving elastodynamics on coarse meshes. As a case study we consider acoustic black holes (ABHs) on structural elements with high aspect ratios such as beams and plates. ABHs are traps for flexural waves based on reducing the structural thickness according to a power-law profile at the end of a beam, or within a two-dimensional circular indentation in a plate. For the ABH to function properly, the thickness at the termination/center must be very small, which demands very fine computational meshes. The proposed strategy combining the stabilized FEM with the ANN correction allows us to accurately simulate the response of ABHs on coarse meshes for values of the ABH order and residual thickness outside the training test, as well as for different excitation frequencies., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A VMS–based fractional step technique for the compressible Navier–Stokes equations using conservative variables

  • Parada Bustelo, Samuel
  • Codina, Ramon
  • Baiges Aznar, Joan
In this paper we address the compressible Navier–Stokes equations written in the so-called conservative formulation. In particular, we focus on the possibility of uncoupling the computation of the problem unknowns, namely, density, linear momentum and total energy, a technique usually labeled as fractional step method, which allows to reduce the associated computational cost. The proposed methodology is a finite-element solver supplemented with a stabilization technique within the Variational Multi-Scale framework. In this regard, we consider orthogonal and dynamic definitions for the subscales. This discretization in space shows an adequate stability, permitting in particular the use of equal interpolation for all variables in play. However, we complement it with a shock-capturing operator in order to solve problems involving shocks. Several representative benchmark flow simulations are performed, which demonstrate the suitability of the proposed algorithm for a vast range of regimes., Samuel Parada gratefully acknowledges the support received from the Agència de Gestió d'Ajuts Universitaris i de Recerca through the predoctoral FI grant 2019-FI-B-00607. Joan Baiges gratefully acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. Ramon Codina gratefully acknowledges the support received from the ICREA Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government. CIMNE is a recipient of a “Severo Ochoa Programme for Centers of Excellence in R&D” grant (CEX2018-000797-S) by the Spanish Government., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of an algebraic fractional step scheme for the primitive formulation of the compressible Navier-Stokes equations

  • Parada Bustelo, Samuel
  • Codina, Ramon
  • Baiges Aznar, Joan
In this work we address the compressible Navier-Stokes equations written in the so-called primitive formulation. The proposed methodology is a finite-element solver based on a fractional step scheme in time, which allows to uncouple the calculation of the problem unknowns providing important savings in computational cost. In addition, we include a stabilization technique within the Variational Multi-Scale framework and, in particular, we consider orthogonal and dynamic definitions for the subscales. In order to overcome any wave reflections which may arise in aeroacoustic simulations at the low compressibility regime, we present a method for enforcing boundary conditions based on a combination of a zero order non-reflecting condition plus the weak imposition of Dirichlet boundary conditions over the external contours. Several representative benchmark flow simulations are performed, which demonstrate the suitability of the proposed algorithm for the subsonic regime., Samuel Parada gratefully acknowledges the support received from the Agència de Gestió d'Ajuts Universitaris i de Recerca through the predoctoral FI grant 2019-FI-B-00607. Joan Baiges gratefully acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. Ramon Codina gratefully acknowledges the support received from the ICREA Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government. CIMNE is a recipient of a “Severo Ochoa Programme for Centers of Excellence in R&D” grant (CEX2018-000797-S) by the Spanish Ministry of Economy and Competitiveness., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mixed stabilized finite element methods in linear elasticity for the velocity–stress equations in the time and the frequency domains

  • Fabra Ruiz, Arnau
  • Codina, Ramon
In this work we present stabilized finite element methods for the mixed velocity–stress elasticity equations and for its irreducible velocity form. This is done both for the time and frequency domains, the latter being obtained by assuming a harmonic behavior in time. Stabilization methods that belong to the computational framework of the Variational Multi-Scale formulation are used. It is shown that the adequate selection of the algorithmic parameters on which the formulation depends allows one to switch from the primal to the dual functional framework. The performance of the method is tested through several numerical examples, one of which includes a convergence study., R. Codina gratefully acknowledges the support received through the ICREA Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government. CIMNE is a recipient of a “Severo Ochoa Programme for Centers of Excellence in R&D” grant (CEX2018-000797-S) by the Spanish Ministry of Economy and Competitiveness ., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Finite element approximation of wave problems with correcting terms based on training artificial neural networks with fine solutions

  • Fabra Ruiz, Arnau
  • Baiges Aznar, Joan
  • Codina, Ramon
In this paper we present a general idea to correct coarse models by introducing a correcting term designed from fine solutions that can be then applied to situations in which a fine solution is not available. We apply this idea to the wave equation in both the time domain and the frequency domain. This correcting term is computed and trained by making use of learning algorithms, such as the least squares model or a model constructed from an artificial neural network. The performance of the method is tested through different acoustic numerical examples, where the fine solutions are characterized for having a finer discretization either in time or in space., A. Fabra acknowledges the support obtained from the Spanish Government through the FPI grant RTI2018-098276-B-I00. J. Baiges gratefully acknowledges the support of the Spanish Government through the Ramón y Cajal grant RYC-2015-17367. R. Codina gratefully acknowledges the support received through the ICREA Acadèmia Research Program of the Catalan Government. This work was partially funded through the TOP-FSI: RTI2018-098276-B-I00 project of the Spanish Government. CIMNE is a recipient of a “Severo Ochoa Programme for Centers of Excellence in R&D” grant (CEX2018-000797-S) by the Spanish Ministry of Economy and Competitiveness., Peer Reviewed, Postprint (author's final draft)