Pasar al contenido principal

INSTRUMENTACION PARA CARACTERIZAR EL ENTORNO MARCIANO EN MISIONES DE LA NASA: SENSORES DE VIENTO PARA MEDA (CONCLUSION DE LAS FASES D Y E)

RTI2018-098728-B-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Dust, Sand, and Winds Within an Active Martian Storm in Jezero Crater

  • Lemmon, M. T.
  • Smith, Michael D.
  • Viúdez Moreiras, Daniel
  • De la Torre Juárez, M.
  • Munguira, A.
  • Sánchez Lavega, Agustín
  • Hueso, R.
  • Chide, B.
  • Sullivan, Robert
  • Toledo, D.
  • Tamppari, L. K.
  • Bertrand, T.
  • Bell, James
  • Newman, C. E.
  • Baker, M.
  • Banfield, D.
  • Rodríguez Manfredi, J. A.
  • Maki, Justin N.
  • Vicente Retortillo, Álvaro
  • Martínez, Germán M.
  • Apéstigue, Víctor
Rovers and landers on Mars have experienced local, regional, and planetary-scale dust storms. However, in situ documentation of active lifting within storms has remained elusive. Over 5–11 January 2022 (LS 153°–156°), a dust storm passed over the Perseverance rover site. Peak visible optical depth was ∼2, and visibility across the crater was briefly reduced. Pressure amplitudes and temperatures responded to the storm. Winds up to 20 m s−1 rotated around the site before the wind sensor was damaged. The rover imaged 21 dust-lifting events—gusts and dust devils—in one 25-min period, and at least three events mobilized sediment near the rover. Rover tracks and drill cuttings were extensively modified, and debris was moved onto the rover deck. Migration of small ripples was seen, but there was no large-scale change in undisturbed areas. This work presents an overview of observations and initial results from the study of the storm., The authors acknowledge and thank the Mars 2020 team. The research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration (80NM0018D0004). ML is supported by contract 15–712 from Arizona State University and 1607215 from Caltech-JPL. Funding for some Spain-based co-authors was provided by the Spanish Ministry of Economy and Competitiveness, through the projects No. ESP2014-54256-C4--4R and AYA2015-65041-P; Ministry of Science, Innovation and Universities, projects No. ESP2016-79612-C3-3R, ESP2016-80320-C2-1-R, RTI2018-098728-B- C33 and RTI2018-099825-B-C31; Instituto Nacional de Técnica Aeroespacial; Ministry of Science and Innovation's Centre for the Development of Industrial Technology; Grupos Gobierno Vasco IT1366-19; and European Research Council Consolidator Grant No. 818602. ASL, RH and AMR were supported by grant PID2019-109467GB-I00 funded by MCIN/AEI/10.13039/501100011033/and by Grupos Gobierno Vasco IT1366-19. A. V.-R. is supported by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia “María de Maeztu”- Centro de Astrobiología (INTA-CSIC). Any opinions, findings and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of funding agencies or the Space Science Institute., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

The diverse meteorology of Jezero crater over the first 250 sols of Perseverance on Mars

  • Rodríguez Manfredi, J. A.
  • De la Torre Juárez, M.
  • Sánchez Lavega, Agustín
  • Hueso, R.
  • Lemmon, M. T.
  • Newman, C. E.
  • Munguira, A.
  • Hieta, M.
  • Tamppari, L. K.
  • Polkko, J.
  • Toledo, D.
  • Sebastian, D.
  • Smith, Michael D.
  • Jaakonaho, I.
  • Genzer, María
  • Viúdez Moreiras, Daniel
  • Ramos, Miguel
  • Saiz López, A.
  • Lepinette Malvitte, A.
  • Wolff, Michael
  • Sullivan, R. J.
  • Gómez Elvira, J.
  • Conrad, P.
  • Del Río Gaztelurrutia, T.
  • Murdoch, N.
  • Banfield, D.
  • Boland, J.
  • Brown, Adrian Jon
  • Ceballos Cáceres, J.
  • Domínguez Pumar, M.
  • Espejo, S.
  • Fairén, A.
  • Ferrándiz Guibelalde, Ricardo
  • Fischer, E.
  • García Villadangos, M.
  • Giménez Torregrosa, S.
  • Gómez Gómez, F.
  • Guzewich, Scott
  • Harri, Ari-Matti
  • Jiménez Martín, Juan José
  • Jiménez, V.
  • Makinen, Terhi
  • Marín Jiménez, M.
  • Martín Soler, J.
  • Molina, A.
  • Mora Sotomayor, L.
  • Navarro López, Sara
  • Peinado, V.
  • Pérez Grande, I.
  • Pla García, J.
  • Postigo, M.
  • Rafkin, Scot C. R.
  • Richardson, M. I.
  • Romeral, J.
  • Savijärvi, H.
  • Schofield, J. T.
  • Torres, J.
  • Urquí, R.
  • Zurita, S.
  • Martínez, Germán M.
  • Vicente Retortillo, Álvaro
  • Apéstigue, Víctor
  • Arruego, Ignacio
  • Martín-Rubio, Carolina
  • Prieto-Ballesteros, Olga
  • Romero Guzmán, Catalina
25 pags., 16 figs., NASA’s Perseverance rover’s Mars Environmental Dynamics Analyzer is collecting data at Jezero crater, characterizing the physical processes in the lowest layer of the Martian atmosphere. Here we present measurements from the instrument’s first 250 sols of operation, revealing a spatially and temporally variable meteorology at Jezero. We find that temperature measurements at four heights capture the response of the atmospheric surface layer to multiple phenomena. We observe the transition from a stable night-time thermal inversion to a daytime, highly turbulent convective regime, with large vertical thermal gradients. Measurement of multiple daily optical depths suggests aerosol concentrations are higher in the morning than in the afternoon. Measured wind patterns are driven mainly by local topography, with a small contribution from regional winds. Daily and seasonal variability of relative humidity shows a complex hydrologic cycle. These observations suggest that changes in some local surface properties, such as surface albedo and thermal inertia, play an influential role. On a larger scale, surface pressure measurements show typical signatures of gravity waves and baroclinic eddies in a part of the seasonal cycle previously characterized as low wave activity. These observations, both com, This work has been funded by the Spanish Ministry of Economy and Competitiveness, through the projects no. ESP2014-54256-C4-1-R (also -2-R, -3-R and -4-R); Ministry of Science, Innovation and Universities, projects no. ESP2016-79612-C3-1-R (also -2-R and -3-R); Ministry of Science and Innovation/State Agency of Research (10.13039/501100011033), projects no. ESP2016-80320-C2-1-R, RTI2018-098728-B-C31 (also -C32 and -C33), RTI2018-099825-B-C31, PID2019-109467GB-I00 and PRE2020-092562; Instituto Nacional de Técnica Aeroespacial; Ministry of Science and Innovation’s Centre for the Development of Industrial Technology; Spanish State Research Agency (AEI) Project MDM-2017-0737 Unidad de Excelencia “María de Maeztu”—Centro de Astrobiología; Grupos Gobierno Vasco IT1366-19; and European Research Council Consolidator Grant no 818602. The US co-authors performed their work under sponsorship from NASA’s Mars 2020 project, from the Game Changing Development programme within the Space Technology Mission Directorate and from the Human Exploration and Operations Directorate. Part of this research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration (80NM0018D0004). G.M. acknowledges JPL funding from USRA Contract Number 1638782. A.G.F. is supported by the European Research Council, Consolidator Grant no. 818602., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Hexagonal Prisms Form in Water-Ice Clouds on Mars, Producing Halo Displays Seen by Perseverance Rover

  • Lemmon, M. T.
  • Toledo, D.
  • Wolff, Michael
  • Patel, P.
  • Guzewich, Scott
  • Colaprete, A.
  • Tamppari, L. K.
  • Montmessin, F.
  • De la Torre Juárez, M.
  • Maki, Justin N.
  • McConnochie, Timothy
  • Brown, Adrian Jon
  • Bell, James
  • Apéstigue, Víctor
  • Arruego, Ignacio
  • Vicente Retortillo, Álvaro
Observations by several cameras on the Perseverance rover showed a 22° scattering halo around the Sun over several hours during northern midsummer (solar longitude 142°). Such a halo has not previously been seen beyond Earth. The halo occurred during the aphelion cloud belt season and the cloudiest time yet observed from the Perseverance site. The halo required crystalline water-ice cloud particles in the form of hexagonal columns large enough for refraction to be significant, at least 11 μm in diameter and length. From a possible 40–50 km altitude, and over the 3.3 hr duration of the halo, particles could have fallen 3–12 km, causing downward transport of water and dust. Halo-forming clouds are likely rare due to the high supersaturation of water that is required but may be more common in northern subtropical regions during northern midsummer., The authors acknowledge and profusely thank the Mars 2020 team from its conception through assembly through operations on Mars. Funding for the U.S.-based authors of this work was provided by the National Aeronautics and Space Administration's Mars 2020 Project, either directly or via subcontracts from the California Institute of Technology's Jet Propulsion Laboratory. The research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration (80NM0018D0004). ML is supported by contract 15-712 from Arizona State University and 1607215 from Caltech-JPL. Funding for some Spain-based co-authors was provided by the Spanish Ministry of Economy and Competitiveness, through the projects No. ESP2014-54256-C4-4-R and AYA2015-65041-P; Ministry of Science, Innovation and Universities, projects No. ESP2016-79612-C3-3-, ESP2016-80320-C2-1-R, RTI2018-098728-B-C33 and RTI2018-099825-B-C31; Instituto Nacional de Técnica Aeroespacial; Ministry of Science and Innovation's Centre for the Development of Industrial Technology; Grupos Gobierno Vasco IT1366-19; and European Research Council Consolidator Grant No. 818602. A. V.-R. is supported by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia “María de Maeztu” - Centro de Astrobiología (INTA-CSIC)., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

The Mars Environmental Dynamics Analyzer, MEDA. A Suite of Environmental Sensors for the Mars 2020 Mission

  • Rodríguez Manfredi, J. A.
  • De la Torre Juárez, M.
  • Alonso, A.
  • Apéstigue, Víctor
  • Arruego, Ignacio
  • Atienza, T.
  • Banfield, D.
  • Boland, J.
  • Carrera, M. A.
  • Castañer, L.
  • Ceballos Cáceres, J.
  • Chen Chen, H.
  • Cobos, A.
  • Conrad, Pamela G.
  • Cordoba, E.
  • Del Río Gaztelurrutia, T.
  • Vicente Retortillo, Álvaro
  • Domínguez Pumar, M.
  • Espejo, S.
  • Fairén, Alberto G.
  • Fernández Palma, A.
  • Ferrándiz, Ricardo
  • Ferri, F.
  • Fischer, E.
  • García Manchado, A.
  • García Villadangos, M.
  • Genzer, María
  • Giménez, Á.
  • Gómez Elvira, J.
  • Gómez, Felipe
  • Guzewich, Scott
  • Harri, Ari-Matti
  • Hernández, C. D.
  • Hieta, M.
  • Hueso, R.
  • Jaakonaho, I.
  • Jiménez Martín, Juan José
  • Jiménez, V.
  • Larman, A.
  • Leiter, R.
  • Lepinette Malvitte, A.
  • Lemmon, M. T.
  • López, G.
  • Madsen, Soren N.
  • Mäkinen, T.
  • Marín Jiménez, M.
  • Martín Soler, J.
  • Martínez, Germán M.
  • Molina, A.
  • Mora Sotomayor, L.
  • Moreno Álvarez, J. F.
  • Navarro López, Sara
  • Newman, C. E.
  • Ortega, Cristina
  • Parrondo, María Concepción
  • Peinado, V.
  • Peña, A.
  • Pérez Grande, I.
  • Pérez Hoyos, S.
  • Pla García, J.
  • Polkko, J.
  • Postigo, M.
  • Prieto-Ballesteros, Olga
  • Rafkin, Scot C. R.
  • Ramos, Miguel
  • Richardson, M. I.
  • Romeral, J.
  • Romero Guzmán, Catalina
  • Runyon, Kirby
  • Saiz López, A.
  • Sánchez Lavega, Agustín
  • Sard, I.
  • Schofield, J. T.
  • Sebastián, E.
  • Smith, Michael D.
  • Sullivan, Robert
  • Tamppari, L. K.
  • Thompson, A. D.
  • Toledo, D.
  • Torrero, F.
  • Torres, J.
  • Urquí, R.
  • Velasco, T.
  • Viúdez Moreiras, Daniel
  • Zurita, S.
NASA’s Mars 2020 (M2020) rover mission includes a suite of sensors to monitor current environmental conditions near the surface of Mars and to constrain bulk aerosol properties from changes in atmospheric radiation at the surface. The Mars Environmental Dynamics Analyzer (MEDA) consists of a set of meteorological sensors including wind sensor, a barometer, a relative humidity sensor, a set of 5 thermocouples to measure atmospheric temperature at ∼1.5 m and ∼0.5 m above the surface, a set of thermopiles to characterize the thermal IR brightness temperatures of the surface and the lower atmosphere. MEDA adds a radiation and dust sensor to monitor the optical atmospheric properties that can be used to infer bulk aerosol physical properties such as particle size distribution, non-sphericity, and concentration. The MEDA package and its scientific purpose are described in this document as well as how it responded to the calibration tests and how it helps prepare for the human exploration of Mars. A comparison is also presented to previous environmental monitoring payloads landed on Mars on the Viking, Pathfinder, Phoenix, MSL, and InSight spacecraft., This work has been funded by the Spanish Ministry of Economy and Competitiveness, through the projects No. ESP2014-54256-C4-1-R (also -2-R, -3-R and -4-R) and AYA2015-65041-P; Ministry of Science, Innovation and Universities, projects No. ESP2016-79612-C3-1-R (also -2-R and -3-R), ESP2016-80320-C2-1-R, RTI2018-098728-B-C31 (also -C32 and -C33) and RTI2018-099825-B-C31; Instituto Nacional de Tecnica Aeroespacial; Ministry of Science and Innovation's Centre for the Development of Industrial Technology; Grupos Gobierno Vasco IT1366-19; and European Research Council Consolidator Grant no 818602.; The US co-authors performed their work under sponsorship from NASA's Mars 2020 project, from the Game Changing Development program within the Space Technology Mission Directorate and from the Human Exploration and Operations Directorate., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Using the Perseverance MEDA-RDS to identify and track dust devils and dust-lifting gust fronts

  • Toledo, D.
  • Martínez Oter, J.
  • Franchi, Fulvio
  • Serrano, F.
  • De la Torre Juárez, M.
  • Rodríguez Manfredi, J. A.
  • Apéstigue, Víctor
  • Yela González, Margarita
  • Arruego, Ignacio
Funding acquisition, Investigation, Methodology, Software, Supervision, Validation, Visualization, Writing—original draft and Writing—review & editing. VA: Conceptualization, Data curation, Formal analysis, Funding acquisition, Investigation, Methodology, Software, Validation, Visualization, Writing—original draft and Writing—review & editing JM-O: Investigation, Data curation, Formal analysis, Visualization. FF: Investigation, Visualization, Writing—original draft and Writing—review & editing. FS: Investigation, Data curation, Formal analysis, Visualization. MY: Investigation, Data curation, Formal analysis, Visualization. MT: Investigation, Data curation, Visualization, Project administration, Funding acquisition. JR-M: Investigation, Data curation, Project administration, Funding acquisition. IA: Investigation, Data curation, Formal analysis, Visualization, Project administration, unding acquisition.The datasets presented in this study can be found in online repositories. The names of the repository/repositories, accession number(s), and the data of some of the figures can be found at: https://doi.org/10.5281/zenodo.7930641; all perseverance data used in this study are publicly available via the Planetary Data System (2021; Rodriguez-Manfredi et al., 2021)., In the framework of the Europlanet 2024 Research Infrastructure Transnational Access programme, a terrestrial field campaign was conducted from 29 September to 6 October 2021 in Makgadikgadi Salt Pans (Botswana). The main goal of the campaign was to study in situ the impact of the dust devils (DDs) on the observations made by the radiometer Radiation and Dust Sensor (RDS), which is part of the Mars Environmental Dynamics Analyzer instrument, on board NASA’s Mars 2020 Perseverance rover. Several DDs and dust lifting events caused by non-vortex wind gusts were detected using the RDS, and the different impacts of these events were analyzed in the observations. DD diameter, advection velocity, and trajectory were derived from the RDS observations, and then, panoramic videos of such events were used to validate these results. The instrument signal variations produced by dust lifting (by vortices or wind gusts) in Makgadikgadi Pans are similar to those observed on Mars with the RDS, showing the potential of this location as a Martian DD analog., This research was carried out under research permit CMLWS 1/17/4 II (28), granted to FF, by the Ministry of Land Management, Water, and Sanitation Services, Government of Botswana. The field work and research was funded by 1) Europlanet 2024 transnational access. Europlanet 2024 RI received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement number 871149; 2) the Spanish Ministry of Economy and Competitiveness, through project nos. ESP2014-54256-C4-1-R (also -2-R, -3-R, and -4-R); 3) the Ministry of Science, Innovation, and Universities, project nos. ESP2016-79612-C3-1-R (also -2-R and -3-R); and 4) the Ministry of Science and Innovation/State Agency of Research (10.13039/501100011033), project nos. ESP2016-80320-C2-1-R, RTI 2018-098728-B-C31 (also -C32 and -C33), and RTI 2018-099825-B-C31., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Dust Devil Frequency of Occurrence and Radiative Effects at Jezero Crater, Mars, as Measured by MEDA Radiation and Dust Sensor (RDS)

  • Toledo, D.
  • Lemmon, M. T.
  • Gómez Martín, L.
  • Montoro, F.
  • Hueso, R.
  • Newman, C. E.
  • Smith, Michael D.
  • Viúdez Moreiras, Daniel
  • Sánchez Lavega, Agustín
  • De la Torre Juárez, M.
  • Rodríguez Manfredi, J. A.
  • Carrasco, I.
  • Jiménez Martín, Juan José
  • Navarro López, Sara
  • Gómez Elvira, J.
  • Harri, Ari-Matti
  • Polkko, J.
  • Hieta, M.
  • Genzer, María
  • Murdoch, N.
  • Sebastián, E.
  • Apéstigue, Víctor
  • Arruego, Ignacio
  • Martínez, Germán M.
  • Vicente Retortillo, Álvaro
  • Yela González, Margarita
  • García-Menéndez, Elisa
Key Points A dust devil frequency of occurrence of between 1.3 and 3.4 dust devils km−2 sol−1 was derived from MEDA-RDS observations for the first 365 sols, displaying the maximum activity at around noon and increasing as we move from spring into summer We find an average dust devil diameter of 29 m (or a median diameter of 25 m) and maximum and minimum diameters of 132 ± 63.4 m and 5.6 ± 5.5 m Dust devil migration directions are in agreement with the MEDA background wind direction measurements, The Mars Environmental Dynamics Analyzer, onboard the Perseverance rover, is a meteorological station that is operating on Mars and includes, among other sensors, the radiometer Radiation and Dust Sensor (RDS). From RDS irradiance observations, a total of 374 dust devils (DDs) were detected for the first 365 sols of the mission (Ls = 6°–182°), which along with wind and pressure measurements, we estimated a DD frequency of formation at Jezero between 1.3 and 3.4 DD km−2 sol−1 (increasing as we move from spring into summer). This frequency is found to be smaller than that estimated at the Spirit or Pathfinder landing sites but much greater than that derived at InSight landing site. The maximum in DD frequency occurs between 12:00 and 13:00 local true solar time, which is when the convective heat flux and lower planetary boundary layer IR heating are both predicted to peak in Jezero crater. DD diameter, minimum height, and trajectory were studied showing (a) an average diameter of 29 m (or a median of 25 m) and a maximum and minimum diameter of 132 ± 63.4 and 5.6 ± 5.5 m; (b) an average minimum DD height of 231 m and a maximum minimum-height of 872 m; and (c) the DD migration direction is in agreement with wind measurements. For all the cases, DDs decreased the UV irradiance, while at visible or near-IR wavelengths both increases and decreases were observed. Contrary to the frequency of formation, these results indicate similar DD characteristics in average for the studied period., This work has been funded by the Spanish Ministry of Economy and Competitiveness, through the projects no. ESP2014-54256-C4-1-R (also -2-R, -3-R and -4-R); Ministry of Science, Innovation and Universities, projects no. ESP2016-79612-C3-1-R (also -2-R and -3-R); Ministry of Science and Innovation/State Agency of Research (10.13039/501100011033), projects no. ESP2016-80320-C2-1-R, RTI2018-098728-B-C31 (also -C32 and -C33), RTI2018-099825-B-C31. RH and ASL were supported by the Spanish project PID2019-109467GB-I00 funded by MCIN/AEI/10.13039/50110001103 and by Grupos Gobierno Vasco IT1742-22. The US co-authors performed their work under sponsorship from NASA’s Mars 2020 project, from the Game Changing Development programme within the Space Technology Mission Directorate and from the Human Exploration and Operations Directorate. Part of this research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration (80NM0018D0004). G.M. acknowledges JPL funding from USRA Contract Number 1638782. ML is supported by contract 15-712 from Arizona State University and 1607215 from Caltech-JPL., Peerreview
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Mars Environmental Dynamics Analyzer, MEDA. A Suite of Environmental Sensors for the Mars 2020 Mission

  • Rodríguez-Manfredi, José Antonio
  • Torre Juárez, Manuel de la
  • Alonso, A.
  • Apéstigue, V.
  • Arruego, I.
  • Atienza, T.
  • Banfield, D.
  • Boland, J.
  • Carrera, M. A.
  • Castañer, L.
  • Ceballos-Cáceres, J.
  • Chen-Chen, H.
  • Cobos, A.
  • Conrad, P.G.
  • Cordoba, E.
  • Río Gaztelurrutia, Teresa del
  • Vicente-Retortillo, Álvaro
  • Domínguez-Pumar, Manuel
  • Espejo, S.
  • Gómez-Elvira, Javier
  • Gómez, F.
  • Fairén, Alberto G.
  • Fernández-Palma, A.
  • Ferrándiz, R.
  • Ferri, F.
  • Fischer, E.
  • García-Manchado, A.
  • García-Villadangos, Miriam
  • Genzer, M.
  • Giménez, S.
  • Guzewich, Scott D.
  • Harri, A. M.
  • Hernández, C.D.
  • Hieta, M.
  • Hueso, R.
  • Jaakonaho, I.
  • Jiménez, J.J.
  • Jiménez, V.
  • Larman, A.
  • Leiter, R.
  • Lepinette, Alain
  • Lemmon, M. T.
  • López, G.
  • Madsen, S.N.
  • Mäkinen, T.
  • Marín, M.
  • Martín-Soler, J.
  • Martínez Martínez, Germán
  • Molina, A.
  • Mora-Sotomayor, L.
  • Moreno-Álvarez, J.F.
  • Navarro, Sara
  • Ortega, C.
  • Parrondo, M.C.
  • Peinado, V.
  • Peña, A.
  • Pérez-Grande, I.
  • Pérez-Hoyos, S.
  • Pla-García, Jorge
  • Postigo, M.
  • Prieto-Ballesteros, Olga
  • Ramos, M.
  • Romeral, J.
  • Romero, C.
  • Saiz-Lopez, A.
  • Sánchez-Lavega, A.
  • Sard, I.
  • Sebastian, E.
  • Toledo, Daniel
  • Torrero, F.
  • Torres, J.
  • Urquí, R.
  • Velasco, T.
  • Viúdez-Moreiras, Daniel
  • Zurita, S.
86 pags., 49 figs., 24 tabs., NASA’s Mars 2020 (M2020) rover mission includes a suite of sensors to monitor current environmental conditions near the surface of Mars and to constrain bulk aerosol properties from changes in atmospheric radiation at the surface. The Mars Environmental Dynamics Analyzer (MEDA) consists of a set of meteorological sensors including wind sensor, a barometer, a relative humidity sensor, a set of 5 thermocouples to measure atmospheric temperature at ∼1.5 m and ∼0.5 m above the surface, a set of thermopiles to characterize the thermal IR brightness temperatures of the surface and the lower atmosphere. MEDA adds a radiation and dust sensor to monitor the optical atmospheric properties that can be used to infer bulk aerosol physical properties such as particle size distribution, non-sphericity, and concentration. The MEDA package and its scientific purpose are described in this document as well as how it responded to the calibration tests and how it helps prepare for the human exploration of Mars. A comparison is also presented to previous environmental monitoring payloads landed on Mars on the Viking, Pathfinder, Phoenix, MSL, and InSight spacecraft., This work has been funded by the Spanish Ministry of Economy and Competitiveness, through the projects No. ESP2014-54256-C4-1-R (also -2-R, -3-R and -4-R) and AYA2015-65041-P; Ministry of Science, Innovation and Universities, projects No. ESP2016-79612-C3-1-R (also -2-R and -3-R), ESP2016-80320-C2-1-R, RTI2018-098728-B-C31 (also -C32 and -C33) and RTI2018-099825-B-C31; Instituto Nacional de Técnica Aeroespacial; Ministry of Science and Innovation’s Centre for the Development of Industrial Technology; Grupos Gobierno Vasco IT1366-19; and European Research Council Consolidator Grant no 818602. The US co-authors performed their work under sponsorship from NASA’s Mars 2020 project, from the Game Changing Development program within the Space Technology Mission Directorate and from the Human Exploration and Operations Directorate.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The diverse meteorology of Jezero crater over the first 250 sols of Perseverance on Mars

  • Rodríguez-Manfredi, José Antonio
  • Torre Juárez, Manuel de la
  • Sánchez-Lavega, A.
  • Hueso, R.
  • Martínez Martínez, Germán
  • Lemmon, M. T.
  • Newman, C. E.
  • Munguira, A.
  • Hieta, M.
  • Tamppari, L. K.
  • Polkko, J.
  • Toledo, Daniel
  • Sebastian, E.
  • Smith, M. D.
  • Jaakonaho, I.
  • Genzer, M.
  • Vicente-Retortillo, Álvaro
  • Viúdez-Moreiras, Daniel
  • Ramos, M. Ángeles
  • Saiz-Lopez, A.
  • Lepinette, Alain
  • Wolff, M.
  • Sullivan, R. J.
  • Gómez-Elvira, Javier
  • Apestigue, V.
  • Conrad, P. G.
  • Río Gaztelurrutia, Teresa del
  • Murdoch, Naomi
  • Arruego, I.
  • Banfield, D.
  • Boland, J.
  • Brown, A. J.
  • Ceballos, J.
  • Dominguez-Pumar, M.
  • Espejo, S.
  • Fairén, Alberto G.
  • Ferrandiz, R.
  • Fischer, E.
  • García-Villadangos, Miriam
  • Gimenez, S.
  • Gomez-Gomez, F.
  • Guzewich, Scott D.
  • Harri, A. M.
  • Jimenez, J. J.
  • Jimenez, V.
  • Makinen, T.
  • Marin, M.
  • Martín, C.
  • Martin-Soler, J.
  • Molina, A.
  • Mora-Sotomayor, L.
  • Navarro, S.
  • Peinado, V.
  • Pérez-Grande, I.
  • Pla-García, Jorge
  • Postigo, M.
  • Prieto-Ballesteros, Olga
  • Rafkin, Scot C. R.
  • Richardson, M. I.
  • Romeral, J.
  • Romero, C.
  • Savijärvi, H.
  • Schofield, J. T.
  • Torres, J.
  • Urqui, R.
  • Zurita, S.
25 pags., 16 figs., NASA’s Perseverance rover’s Mars Environmental Dynamics Analyzer is collecting data at Jezero crater, characterizing the physical processes in the lowest layer of the Martian atmosphere. Here we present measurements from the instrument’s first 250 sols of operation, revealing a spatially and temporally variable meteorology at Jezero. We find that temperature measurements at four heights capture the response of the atmospheric surface layer to multiple phenomena. We observe the transition from a stable night-time thermal inversion to a daytime, highly turbulent convective regime, with large vertical thermal gradients. Measurement of multiple daily optical depths suggests aerosol concentrations are higher in the morning than in the afternoon. Measured wind patterns are driven mainly by local topography, with a small contribution from regional winds. Daily and seasonal variability of relative humidity shows a complex hydrologic cycle. These observations suggest that changes in some local surface properties, such as surface albedo and thermal inertia, play an influential role. On a larger scale, surface pressure measurements show typical signatures of gravity waves and baroclinic eddies in a part of the seasonal cycle previously characterized as low wave activity. These observations, both combined and simultaneous, unveil the diversity of processes driving change on today’s Martian surface at Jezero crater., This work has been funded by the Spanish Ministry of Economy and Competitiveness, through the projects no. ESP2014-54256-C4-1-R (also -2-R, -3-R and -4-R); Ministry of Science, Innovation and Universities, projects no. ESP2016-79612-C3-1-R (also -2-R and -3-R); Ministry of Science and Innovation/State Agency of Research (10.13039/501100011033), projects no. ESP2016-80320-C2-1-R, RTI2018-098728-B-C31 (also -C32 and -C33), RTI2018-099825-B-C31, PID2019-109467GB-I00 and PRE2020-092562; Instituto Nacional de Técnica Aeroespacial; Ministry of Science and Innovation’s Centre for the Development of Industrial Technology; Spanish State Research Agency (AEI) Project MDM-2017-0737 Unidad de Excelencia “María de Maeztu”—Centro de Astrobiología; Grupos Gobierno Vasco IT1366-19; and European Research Council Consolidator Grant no 818602. The US co-authors performed their work under sponsorship from NASA’s Mars 2020 project, from the Game Changing Development programme within the Space Technology Mission Directorate and from the Human Exploration and Operations Directorate. Part of this research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration (80NM0018D0004). G.M. acknowledges JPL funding from USRA Contract Number 1638782. A.G.F. is supported by the European Research Council, Consolidator Grant no. 818602., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Design and smart control of sensors for optimal performance: a application to wind sensing in Mars

  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Kowalski, Lukasz
  • Jiménez Serres, Vicente|||0000-0001-5668-7049
  • Pons Nin, Joan|||0000-0002-0356-5678
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Soria Guerrero, Manel|||0000-0002-4112-6078
Sensor performance in terms of time response and sensitivity can be dramatically enhanced by operating sensors under what may be called a “constant state operation”. This means that any change in the sensor due to external factors (including the ones to be measured) is compensated by the smart control, so that state of the sensor does not change with time. This idea has been applied to thermal anemometry in Mars (for REMS, TWINS and MEDA) by using constant temperature operation and differential thermal conductance estimators. In the case of our miniature spherical wind sensor for future missions, this principle requires a careful thermal design ensuring that single time constant operation is ensured, [1-3]. Experiments show that it is possible to obtain response times (1s) well below the open loop time constants. Additionally, the performance of the sensor at the Aarhus Martian wind tunnel are presented, as well as experiments in the Reynolds regime 1000-10e4, with equivalent Mars wind velocities in the range 100-150m/s., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Relation between Fluorescence Quantum Yield and Open-Circuit Voltage in Complete Perovskite Solar Cells

  • Kramarenko, Mariia|||0000-0002-6934-5467
  • Ferreira, Catarina G.
  • Martínez-Denegrí Sánchez, Guillermo
  • Sansierra, Constanza
  • Toudert, Johann
  • Martorell Pena, Jordi|||0000-0002-8762-1162
Bringing the Voc of a perovskite solar cell toward its radiative value, corresponding to a 100% external fluorescence quantum yield (QY) of the cell, has been pursued to reach the highest performance photovoltaic devices. Therefore, much research has been focused on maximizing the QY of the active layer isolated from the rest of the cell layers. However, such quantity does not often correlate with the Voc following the ideal diode relation. Herein, the QYs of complete FA0.8MA0.2PbI3-yBry solar cells are reported, ranging from 0.1% to 3%, and compared with their Vocs, ranging from 1 to 1.13¿V. By combining these measurements with electromagnetic simulations based on a full-wavevector detailed balance and a fluorescence power-loss model, it is demonstrated that a nonoptimal Voc in mixed-cation lead halide perovskite cells is not only due to nonradiative photocarrier recombination at traps. In addition to the expected parasitic absorption of the emitted photons in the electrode layers, discrepancies appear between Voc and QY. These discrepancies are attributed to the rise of energy barriers, a side effect of trap removal. Indeed, although surface passivation may enhance the QY, its beneficial effect may be counterbalanced by the emergence of such barriers between active and charge-transporting layers. Bringing the Voc of a perovskite solar cell toward its radiative value, corresponding to a 100% external fluorescence quantum yield (QY) of the cell, has been pursued to reach the highest performance photovoltaic devices. Therefore, much research has been focused on maximizing the QY of the active layer isolated from the rest of the cell layers. However, such quantity does not often correlate with the Voc following the ideal diode relation. Herein, the QYs of complete FA0.8MA0.2PbI3-yBry solar cells are reported, ranging from 0.1% to 3%, and compared with their Vocs, ranging from 1 to 1.13¿V. By combining these measurements with electromagnetic simulations based on a full-wavevector detailed balance and a fluorescence power-loss model, it is demonstrated that a nonoptimal Voc in mixed-cation lead halide perovskite cells is not only due to nonradiative photocarrier recombination at traps. In addition to the expected parasitic absorption of the emitted photons in the electrode layers, discrepancies appear between Voc and QY. These discrepancies are attributed to the rise of energy barriers, a side effect of trap removal. Indeed, although surface passivation may enhance the QY, its beneficial effect may be counterbalanced by the emergence of such barriers between active and charge-transporting layers., This work was supported by the Spanish Ministry MINECO (grant RTI2018- 098728-B-C33), the Spanish Ministry of Economy and Competitiveness (OrgEnergyExcelence Network CTQ2016-81911-REDT), the Severo Ochoa program (grant SEV-2015-0522), the MINECO and the FEDER (grant MAT2017-89522-R), the Fundació Mir Puig, the Fundacio Privada Cellex, and the CERCA program from the Generalitat de Catalunya. C.G.F. acknowledges European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska-Curie grant agreement no. 665884. J.M. acknowledges support from Generalitat de Catalunya (Program ICREA Academia)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Condution mechanisms and charge trapping control in SiO2 nanoparticle MIM capacitors

  • Bheesayagari, Chenna Reddy
  • Pons Nin, Joan|||0000-0002-0356-5678
  • Orpella García, Alberto|||0000-0003-2726-5861
  • Véliz Noboa, Bremnen Marino
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The objective of this paper is to present a charge trapping control method for MIM capacitors in whichthe dielectric is made of electrospray-deposited silica nanoparticles. The influence of the bias voltage onthe impedance spectra of the devices is analyzed, as well as the main conduction mechanisms along thestructure. The control method allows to monitor and control the long term drifts in the impedance ofthese devices, which are a result of the applied bias voltages., This work was supported by the Spanish Ministry MINECO un-der project RTI2018-098728-B-C33, by the European Space Agencyunder project ESA AO/1e8876/17/NL/CRS and by SENESCYT of therepublic of Ecuador under agreement 2016-AR5G8871, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A miniaturized 3d heat flux sensor to characterize heat transfer in regolith of planets and small bodies

  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Rodríguez Manfredi, José Antonio
  • Jiménez Serres, Vicente|||0000-0001-5668-7049
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
  • Pons Nin, Joan|||0000-0002-0356-5678
The objective of this work is to present the first analytical and experimental results obtained with a 3D heat flux sensor for planetary regolith. The proposed structure, a sphere divided in four sectors, is sensible to heat flow magnitude and angle. Each sector includes a platinum resistor that is used both to sense its temperature and provide heating power. By operating the sectors at constant temperature, the sensor gives a response that is proportional to the heat flux vector in the regolith. The response of the sensor is therefore independent of the thermal conductivity of the regolith. A complete analytical solution of the response of the sensor is presented. The sensor may be used to provide information on the instantaneous local thermal environment surrounding a lander in planetary exploration or in small bodies like asteroids. To the best knowledge of the authors, this is the first sensor capable of measuring local 3D heat flux, This work was supported in part by the Spanish Ministerio de Economía y Competividad under Projects RTI2018-098728-B-C31 and RTI2018-098728-B-C33, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Spherical probe for the thermophysical characterization of regoliths for planetary exploration using frequency methods

  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Rosero Pozo, Carlos Alberto|||0000-0003-3660-727X
  • Pons Nin, Joan|||0000-0002-0356-5678
  • Ramos Castro, Juan José|||0000-0001-9413-2001
  • Szewczyk, Daria
  • Jezowski, Andrzej
  • Solà Peñafiel, Nil
  • Manyosa i Vilardell, Xavier|||0000-0003-3132-1678
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
  • Jiménez Serres, Vicente|||0000-0001-5668-7049
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The objective of this paper is to analyse the capability of a spherical thermoprobe, recently proposed as a 3D heat flux sensor for regoliths, and additionally to characterize the thermophysical properties of regoliths. The sensor is based on the spherical structure of a Mars wind sensor. The characterization is carried out using frequency methods. Extensive experimental results have been obtained with eight regolith simulants made of glass microbeads. Errors in thermal conductivity and diffusivity are smaller than ± 7%, for these simulants., Funded in part by MICINN, grants no. RTI2018-098728-B-C33 and PID2021-126719OB-C42, and ESA contract 4000128070/19/NL/KML for the MiniPINS study., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Impedance spectroscopy interpretation of silica and polystyrene colloidal suspensions

  • Véliz Noboa, Bremnen Marino
  • Orpella García, Alberto|||0000-0003-2726-5861
  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
© <2020> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Impedance spectroscopy differences between colloidal 295-nm silica and 300-nm polystyrene nanoparticles in deionized water are analyzed in this work. Using two different two-electrode measurement setups, designed for this application, impedance spectroscopy measurements performed directly in the colloidal suspensions with same nanoparticles size, shape and concentration, are fitted using Randles circuit models. The parameter analysis allows to identify the suspension response, the electrode-suspension interfaces response and nanoparticle double layer response. The first measurement system consists of a two aluminum wire electrodes characterized in a frequency range from 0.1Hz to 100 kHz while the second system was two square stainless steel electrodes characterized from 0.1Hz to 5 MHz. According to the results, polystyrene nanoparticles suspension presents higher conductivity and higher values of capacitance than silica suspension. It is revealed that as the nanoparticle concentration decreases, the suspension conductivity decreases for both colloidal suspensions. On the other hand, the electrode polarization effect contributed with high impedance and capacitance values, but showed a contrary behavior with the variation of the nanoparticles concentration. These differences found mainly arise because of the hydrophilic and hydrophobic nature of the silica and polystyrene nanoparticle surfaces., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Open loop testing for optimizing the closed loop operation of chemical systems

  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Olm Miras, Josep Maria|||0000-0003-4925-9251
  • Kowalski, Lukasz
  • Jiménez Serres, Vicente|||0000-0001-5668-7049
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, One way to optimize the operation of chemical systems consists on using closed loop controls while the system is operated. This way, it is possible to optimize the operating point in the plant, process or chemical system so that certain quantities are maximized/minimized or time responses are reduced. In the design of the closed loop controls, though, one of the problems is the large number of configuration parameters involved and the uncertainties in the system. The objective of this paper is to present how recently proposed controls, exploiting time-scale separation, allow to configure their closed loop configuration parameters from open-loop measurements. These controls have been proposed to accelerate the time response of metal-oxide gas sensors by operating at constant surface potential. The main result of the paper explains the link between the open loop measurements and closed loop operation. Experiments are provided using a commercial off-the-shelf Microelectromechanical gas sensor., The work of M. Dominguez-Pumar, L. Kowalski and V. Jimenez was partially supported by the Government of Spain through the Agencia Estatal de Investigación Projects ESP2016-79612-C3-2-R and RTI2018-098728-B-C33 and by the Generalitat de Catalunya through the Project 2017 SGR 279. The work of J.M. Olm was partially supported by the Government of Spain through the Agencia Estatal de Investigación Project DPI2017-85404-P and by the Generalitat de Catalunya through the Project 2017 SGR 872., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analysis and impedance modeling of silica and polystyrene nanoparticles in EMIM structures for humidity sensing applications

  • Véliz Noboa, Bremnen Marino
  • Orpella García, Alberto|||0000-0003-2726-5861
  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
This work shows the fabrication technology details and a proposed impedance spectroscopy modeling of Electrosprayed-nanoparticles Metal Insulator Metal (EMIM) structures, and their potential as humidity sensors. The impedance measurement of two structures based on 255-nm silica and 295-nm polystyrene nanoparticles under different relative humidity levels (30-90 %RH) and scanning electron microscopy were carried out. A higher capacitance in silica than in polystyrene EMIM structure is attributed to the adsorption of moisture and the diffusion of charges through the Grotthus mechanism onto the nanoparticle surface. The Poole-Frenkel dielectric conductivity in the silica capacitor is interpreted, which increases with decreasing humidity. While the Ohmic dielectric conductivity in PS nanostructure decreases with decreasing humidity. The silica EMIM structure has a good linear capacitance dependence on the humidity of almost 95% and a maximum sensitivity of 6362%, defined as ¿C/C30%, is obtained, making these devices a promising novel nanostructure for humidity sensing applications., This work has been supported by the Spanish Ministry MINECO under projects TEC2017-82305-R, RTI2018-098728-B-C33, by the European Space Agency under project ESA AO/1-8876/17/NL/CRS, and by the SENESCYT-IFTH of the republic of Ecuador under agreement 2016-AR5G8871., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analyzing the performance of a miniature 3D wind sensor for Mars

  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Kowalski, Lukasz
  • Jiménez Serres, Vicente|||0000-0001-5668-7049
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Soria Guerrero, Manel|||0000-0002-4112-6078
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
  • Pons Nin, Joan|||0000-0002-0356-5678
This paper analyzes the behavior of a miniature 3D wind sensor designed for Mars atmosphere. The sensor is a spherical structure of 10 mm diameter divided in four sectors. By setting all the sectors to constant temperature, above that of the air, the 3D wind velocity vector can be measured. Two sets of experiments have been performed. First, an experimental campaign made under typical Mars conditions at the Aarhus Wind Tunnel Simulator is presented. The results demonstrate that both wind speed and angle can be efficiently measured, using a simple inverse algorithm. The effect of sudden wind changes is also analyzed and fast response times in the range of 0.7 s are obtained. The second set of experiments is focused on analyzing the performance of the sensor under extreme Martian wind conditions, reaching and going beyond the Dust Devil scale. To this purpose, both high-fidelity numerical simulations of fluid dynamics and heat transfer and experiments with the sensor have been performed. The results of the experiments, made for winds in the Reynolds number 1000–2000 range, which represent 65–130 m/s of wind speed under typical Mars conditions, further confirm the simulation predictions and show that it will be possible to successfully measure wind speed and direction even under these extreme regimes., This research was supported by the Spanish Ministry MINECO (Ministerio de Economía y Competividad) under project grant RTI2018-098728-B-C33., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Spherical probe for the thermophysical characterization of regoliths for planetary exploration using frequency methods

  • Domínguez Pumar, Manuel
  • Rosero Pozo, Carlos Alberto
  • Pons Nin, Joan
  • Ramos Castro, Juan José
  • Szewczyk, Daria
  • Jezowski, Andrzej
  • Solà Peñafiel, Nil
  • Manyosa i Vilardell, Xavier
  • Bermejo Broto, Sandra
  • Jiménez Serres, Vicente
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The objective of this paper is to analyse the capability of a spherical thermoprobe, recently proposed as a 3D heat flux sensor for regoliths, and additionally to characterize the thermophysical properties of regoliths. The sensor is based on the spherical structure of a Mars wind sensor. The characterization is carried out using frequency methods. Extensive experimental results have been obtained with eight regolith simulants made of glass microbeads. Errors in thermal conductivity and diffusivity are smaller than ± 7%, for these simulants., Funded in part by MICINN, grants no. RTI2018-098728-B-C33 and PID2021-126719OB-C42, and ESA contract 4000128070/19/NL/KML for the MiniPINS study., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Open loop testing for optimizing the closed loop operation of chemical systems

  • Domínguez Pumar, Manuel
  • Olm Miras, Josep Maria
  • Kowalski, Lukasz
  • Jiménez Serres, Vicente
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, One way to optimize the operation of chemical systems consists on using closed loop controls while the system is operated. This way, it is possible to optimize the operating point in the plant, process or chemical system so that certain quantities are maximized/minimized or time responses are reduced. In the design of the closed loop controls, though, one of the problems is the large number of configuration parameters involved and the uncertainties in the system. The objective of this paper is to present how recently proposed controls, exploiting time-scale separation, allow to configure their closed loop configuration parameters from open-loop measurements. These controls have been proposed to accelerate the time response of metal-oxide gas sensors by operating at constant surface potential. The main result of the paper explains the link between the open loop measurements and closed loop operation. Experiments are provided using a commercial off-the-shelf Microelectromechanical gas sensor., The work of M. Dominguez-Pumar, L. Kowalski and V. Jimenez was partially supported by the Government of Spain through the Agencia Estatal de Investigación Projects ESP2016-79612-C3-2-R and RTI2018-098728-B-C33 and by the Generalitat de Catalunya through the Project 2017 SGR 279. The work of J.M. Olm was partially supported by the Government of Spain through the Agencia Estatal de Investigación Project DPI2017-85404-P and by the Generalitat de Catalunya through the Project 2017 SGR 872., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analyzing the performance of a miniature 3D wind sensor for Mars

  • Domínguez Pumar, Manuel
  • Kowalski, Lukasz
  • Jiménez Serres, Vicente
  • Rodríguez Pérez, Ivette María
  • Soria Guerrero, Manel
  • Bermejo Broto, Sandra
  • Pons Nin, Joan
This paper analyzes the behavior of a miniature 3D wind sensor designed for Mars atmosphere. The sensor is a spherical structure of 10 mm diameter divided in four sectors. By setting all the sectors to constant temperature, above that of the air, the 3D wind velocity vector can be measured. Two sets of experiments have been performed. First, an experimental campaign made under typical Mars conditions at the Aarhus Wind Tunnel Simulator is presented. The results demonstrate that both wind speed and angle can be efficiently measured, using a simple inverse algorithm. The effect of sudden wind changes is also analyzed and fast response times in the range of 0.7 s are obtained. The second set of experiments is focused on analyzing the performance of the sensor under extreme Martian wind conditions, reaching and going beyond the Dust Devil scale. To this purpose, both high-fidelity numerical simulations of fluid dynamics and heat transfer and experiments with the sensor have been performed. The results of the experiments, made for winds in the Reynolds number 1000–2000 range, which represent 65–130 m/s of wind speed under typical Mars conditions, further confirm the simulation predictions and show that it will be possible to successfully measure wind speed and direction even under these extreme regimes., This research was supported by the Spanish Ministry MINECO (Ministerio de Economía y Competividad) under project grant RTI2018-098728-B-C33., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Relation between Fluorescence Quantum Yield and Open-Circuit Voltage in Complete Perovskite Solar Cells

  • Kramarenko, Mariia
  • Ferreira, Catarina G.
  • Martínez-Denegrí Sánchez, Guillermo
  • Sansierra, Constanza
  • Toudert, Johann
  • Martorell Pena, Jordi
Bringing the Voc of a perovskite solar cell toward its radiative value, corresponding to a 100% external fluorescence quantum yield (QY) of the cell, has been pursued to reach the highest performance photovoltaic devices. Therefore, much research has been focused on maximizing the QY of the active layer isolated from the rest of the cell layers. However, such quantity does not often correlate with the Voc following the ideal diode relation. Herein, the QYs of complete FA0.8MA0.2PbI3-yBry solar cells are reported, ranging from 0.1% to 3%, and compared with their Vocs, ranging from 1 to 1.13¿V. By combining these measurements with electromagnetic simulations based on a full-wavevector detailed balance and a fluorescence power-loss model, it is demonstrated that a nonoptimal Voc in mixed-cation lead halide perovskite cells is not only due to nonradiative photocarrier recombination at traps. In addition to the expected parasitic absorption of the emitted photons in the electrode layers, discrepancies appear between Voc and QY. These discrepancies are attributed to the rise of energy barriers, a side effect of trap removal. Indeed, although surface passivation may enhance the QY, its beneficial effect may be counterbalanced by the emergence of such barriers between active and charge-transporting layers. Bringing the Voc of a perovskite solar cell toward its radiative value, corresponding to a 100% external fluorescence quantum yield (QY) of the cell, has been pursued to reach the highest performance photovoltaic devices. Therefore, much research has been focused on maximizing the QY of the active layer isolated from the rest of the cell layers. However, such quantity does not often correlate with the Voc following the ideal diode relation. Herein, the QYs of complete FA0.8MA0.2PbI3-yBry solar cells are reported, ranging from 0.1% to 3%, and compared with their Vocs, ranging from 1 to 1.13¿V. By combining these measurements with electromagnetic simulations based on a full-wavevector detailed balance and a fluorescence power-loss model, it is demonstrated that a nonoptimal Voc in mixed-cation lead halide perovskite cells is not only due to nonradiative photocarrier recombination at traps. In addition to the expected parasitic absorption of the emitted photons in the electrode layers, discrepancies appear between Voc and QY. These discrepancies are attributed to the rise of energy barriers, a side effect of trap removal. Indeed, although surface passivation may enhance the QY, its beneficial effect may be counterbalanced by the emergence of such barriers between active and charge-transporting layers., This work was supported by the Spanish Ministry MINECO (grant RTI2018- 098728-B-C33), the Spanish Ministry of Economy and Competitiveness (OrgEnergyExcelence Network CTQ2016-81911-REDT), the Severo Ochoa program (grant SEV-2015-0522), the MINECO and the FEDER (grant MAT2017-89522-R), the Fundació Mir Puig, the Fundacio Privada Cellex, and the CERCA program from the Generalitat de Catalunya. C.G.F. acknowledges European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska-Curie grant agreement no. 665884. J.M. acknowledges support from Generalitat de Catalunya (Program ICREA Academia)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impedance spectroscopy interpretation of silica and polystyrene colloidal suspensions

  • Véliz Noboa, Bremnen Marino
  • Orpella García, Alberto
  • Domínguez Pumar, Manuel
  • Bermejo Broto, Sandra
© <2020> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Impedance spectroscopy differences between colloidal 295-nm silica and 300-nm polystyrene nanoparticles in deionized water are analyzed in this work. Using two different two-electrode measurement setups, designed for this application, impedance spectroscopy measurements performed directly in the colloidal suspensions with same nanoparticles size, shape and concentration, are fitted using Randles circuit models. The parameter analysis allows to identify the suspension response, the electrode-suspension interfaces response and nanoparticle double layer response. The first measurement system consists of a two aluminum wire electrodes characterized in a frequency range from 0.1Hz to 100 kHz while the second system was two square stainless steel electrodes characterized from 0.1Hz to 5 MHz. According to the results, polystyrene nanoparticles suspension presents higher conductivity and higher values of capacitance than silica suspension. It is revealed that as the nanoparticle concentration decreases, the suspension conductivity decreases for both colloidal suspensions. On the other hand, the electrode polarization effect contributed with high impedance and capacitance values, but showed a contrary behavior with the variation of the nanoparticles concentration. These differences found mainly arise because of the hydrophilic and hydrophobic nature of the silica and polystyrene nanoparticle surfaces., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Condution mechanisms and charge trapping control in SiO2 nanoparticle MIM capacitors

  • Bheesayagari, Chenna Reddy
  • Pons Nin, Joan
  • Orpella García, Alberto
  • Véliz Noboa, Bremnen Marino
  • Bermejo Broto, Sandra
  • Domínguez Pumar, Manuel
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The objective of this paper is to present a charge trapping control method for MIM capacitors in whichthe dielectric is made of electrospray-deposited silica nanoparticles. The influence of the bias voltage onthe impedance spectra of the devices is analyzed, as well as the main conduction mechanisms along thestructure. The control method allows to monitor and control the long term drifts in the impedance ofthese devices, which are a result of the applied bias voltages., This work was supported by the Spanish Ministry MINECO un-der project RTI2018-098728-B-C33, by the European Space Agencyunder project ESA AO/1e8876/17/NL/CRS and by SENESCYT of therepublic of Ecuador under agreement 2016-AR5G8871, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A miniaturized 3d heat flux sensor to characterize heat transfer in regolith of planets and small bodies

  • Domínguez Pumar, Manuel
  • Rodríguez Manfredi, José Antonio
  • Jiménez Serres, Vicente
  • Bermejo Broto, Sandra
  • Pons Nin, Joan
The objective of this work is to present the first analytical and experimental results obtained with a 3D heat flux sensor for planetary regolith. The proposed structure, a sphere divided in four sectors, is sensible to heat flow magnitude and angle. Each sector includes a platinum resistor that is used both to sense its temperature and provide heating power. By operating the sectors at constant temperature, the sensor gives a response that is proportional to the heat flux vector in the regolith. The response of the sensor is therefore independent of the thermal conductivity of the regolith. A complete analytical solution of the response of the sensor is presented. The sensor may be used to provide information on the instantaneous local thermal environment surrounding a lander in planetary exploration or in small bodies like asteroids. To the best knowledge of the authors, this is the first sensor capable of measuring local 3D heat flux, This work was supported in part by the Spanish Ministerio de Economía y Competividad under Projects RTI2018-098728-B-C31 and RTI2018-098728-B-C33, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Design and smart control of sensors for optimal performance: a application to wind sensing in Mars

  • Domínguez Pumar, Manuel
  • Kowalski, Lukasz
  • Jiménez Serres, Vicente
  • Pons Nin, Joan
  • Bermejo Broto, Sandra
  • Rodríguez Pérez, Ivette María
  • Soria Guerrero, Manel
Sensor performance in terms of time response and sensitivity can be dramatically enhanced by operating sensors under what may be called a “constant state operation”. This means that any change in the sensor due to external factors (including the ones to be measured) is compensated by the smart control, so that state of the sensor does not change with time. This idea has been applied to thermal anemometry in Mars (for REMS, TWINS and MEDA) by using constant temperature operation and differential thermal conductance estimators. In the case of our miniature spherical wind sensor for future missions, this principle requires a careful thermal design ensuring that single time constant operation is ensured, [1-3]. Experiments show that it is possible to obtain response times (1s) well below the open loop time constants. Additionally, the performance of the sensor at the Aarhus Martian wind tunnel are presented, as well as experiments in the Reynolds regime 1000-10e4, with equivalent Mars wind velocities in the range 100-150m/s., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis and impedance modeling of silica and polystyrene nanoparticles in EMIM structures for humidity sensing applications

  • Véliz Noboa, Bremnen Marino
  • Orpella García, Alberto
  • Domínguez Pumar, Manuel
  • Bermejo Broto, Sandra
This work shows the fabrication technology details and a proposed impedance spectroscopy modeling of Electrosprayed-nanoparticles Metal Insulator Metal (EMIM) structures, and their potential as humidity sensors. The impedance measurement of two structures based on 255-nm silica and 295-nm polystyrene nanoparticles under different relative humidity levels (30-90 %RH) and scanning electron microscopy were carried out. A higher capacitance in silica than in polystyrene EMIM structure is attributed to the adsorption of moisture and the diffusion of charges through the Grotthus mechanism onto the nanoparticle surface. The Poole-Frenkel dielectric conductivity in the silica capacitor is interpreted, which increases with decreasing humidity. While the Ohmic dielectric conductivity in PS nanostructure decreases with decreasing humidity. The silica EMIM structure has a good linear capacitance dependence on the humidity of almost 95% and a maximum sensitivity of 6362%, defined as ¿C/C30%, is obtained, making these devices a promising novel nanostructure for humidity sensing applications., This work has been supported by the Spanish Ministry MINECO under projects TEC2017-82305-R, RTI2018-098728-B-C33, by the European Space Agency under project ESA AO/1-8876/17/NL/CRS, and by the SENESCYT-IFTH of the republic of Ecuador under agreement 2016-AR5G8871., Peer Reviewed, Postprint (published version)