Pasar al contenido principal

TECNOLOGIAS ROBUSTAS PARA UN CONCEPTO DE COCHE ELECTRICO AUTOMATIZADO PARA CONDUCTORES MAYORES

RTI2018-099263-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALCALA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A waypoint tracking controller for autonomous road vehicles using ROS framework

  • Gutiérrez, Rodrigo
  • López Guillén, Elena
  • Bergasa, Luis M.
  • Barea, Rafael
  • Pérez, Óscar
  • Gómez Huélamo, Carlos
  • Arango, Felipe
  • del Egido, Javier
  • López Fernández, Joaquín
Automated Driving Systems (ADSs) require robust and scalable control systems in order to achieve a safe, efficient and comfortable driving experience. Most global planners for autonomous vehicles provide as output a sequence of waypoints to be followed. This paper proposes a modular and scalable waypoint tracking controller for Robot Operating System (ROS)-based autonomous guided vehicles. The proposed controller performs a smooth interpolation of the waypoints and uses optimal control techniques to ensure robust trajectory tracking even at high speeds in urban environments (up to 50 km/h). The delays in the localization system and actuators are compensated in the control loop to stabilize the system. Forward velocity is adapted to path characteristics using a velocity profiler. The controller has been implemented as an ROS package providing scalability and exportability to the system in order to be used with a wide variety of simulators and real vehicles. We show the results of this controller using the novel and hyper realistic CARLA Simulator and carrying out a comparison with other standard and state-of-art trajectory tracking controllers., Ministerio de Ciencia e Innovación | Ref. RTI2018-099263-B-C21, Comunidad de Madrid | Ref. P2018 / NMT- 4331
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

Autonomous vehicle control in CARLA Challenge

  • Egido Sierra, Javier del
  • Díaz Díaz, Alejandro
  • Bergasa Pascual, Luis M.
  • Barea Navarro, Rafael
  • López Guillén, M. Elena
Trabajo presentado en: R-Evolucionando el transporte, XIV Congreso de Ingeniería del Transporte (CIT 2021), realizado en modalidad online los días 6, 7 y 8 de julio de 2021, organizado por la Universidad de Burgos, The introduction of Autonomous Vehicles (AVs) in a realistic urban environment is an ambitious objective. AV validation on real scenarios involving actual objects such as cars or pedestrians in a wide range of traffic cases would escalate the cost and could generate hazardous situations. Consequently, autonomous driving simulators are quickly evolving to cover the gap to achieve a fully autonomous driving architecture validation. Most used 3D simulators in self-driving cars field are V-REP (Rohmer, E., 2013) and Gazebo (KOENIG, N. and HOWARD, A., 2004), due to an easy integration with ROS (QUIGLEY, 2009) platform to increase the interoperability with other systems. Those simulators provide accurate motion information (more appropriate for easier scenes like robotic arms) but not a realistic appearance and not allowing real-time systems, not being able to recreate complex traffic scenes. CARLA (DOSOVITSKIY, A., 2017) opensource AV simulator is designed to be able to train and validate control and perception algorithms in complex traffic scenarios with hyper-realistic environments. CARLA simulator allows to easily modify on-board sensors such as cameras or LiDAR, weather conditions and also the traffic scene to perform specific traffic cases. In Summer 2019, CARLA launched its driving challenge to allow everyone to test their own control techniques under the same traffic scenarios, scoring its performance regarding traffic rules. In this paper, the Robesafe researching group approach will be explained, detailing vehicle motion control and object detection adapted from Smart Elderly Car (GÓMEZ-HUÉLAMO, C., 2019) that lead the group to reach the 4th place in Track 3 challenge, where HD Map, Waypoints and environmental sensors data (LiDAR, RGB cameras and GPS) were provided., This work has been funded in part from the Spanish MICINN/FEDER through the Techs4AgeCar project (RTI2018-099263-B-C21) and from the RoboCity2030-DIH-CM project (P2018/NMT- 4331), funded by Programas de actividades I+D (CAM) and cofunded by EU Structural Funds.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Deep reinforcement learning based control for Autonomous Vehicles in CARLA

  • Pérez Gil, Óscar
  • Barea Navarro, Rafael|||0000-0002-4179-6100
  • López Guillén, María Elena
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Gómez Huélamo, Carlos
  • Gutiérrez Moreno, Rodrigo
  • Diaz Diaz, Alejandro
Nowadays, Artificial Intelligence (AI) is growing by leaps and bounds in almost all fields of technology, and Autonomous Vehicles (AV) research is one more of them. This paper proposes the using of algorithms based on Deep Learning (DL) in the control layer of an autonomous vehicle. More specifically, Deep Reinforcement Learning (DRL) algorithms such as Deep Q-Network (DQN) and Deep Deterministic Policy Gradient (DDPG) are implemented in order to compare results between them. The aim of this work is to obtain a trained model, applying a DRL algorithm, able of sending control commands to the vehicle to navigate properly and efficiently following a determined route. In addition, for each of the algorithms, several agents are presented as a solution, so that each of these agents uses different data sources to achieve the vehicle control commands. For this purpose, an open-source simulator such as CARLA is used, providing to the system with the ability to perform a multitude of tests without any risk into an hyper-realistic urban simulation environment, something that is unthinkable in the real world. The results obtained show that both DQN and DDPG reach the goal, but DDPG obtains a better performance. DDPG perfoms trajectories very similar to classic controller as LQR. In both cases RMSE is lower than 0.1m following trajectories with a range 180-700m. To conclude, some conclusions and future works are commented., Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Gaze Focalization System for Driving Applications Using OpenFace 2.0 Toolkit with NARMAX Algorithm in Accidental Scenarios

  • Araluce Ruiz, Javier
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Ocaña Miguel, Manuel|||0000-0002-8875-1866
  • López Guillén, María Elena
  • Revenga de Toro, Pedro Alfonso|||0000-0003-2550-5972
  • Arango Vargas, Juan Felipe|||0000-0003-4989-9443
  • Pérez Gil, Óscar
Monitoring driver attention using the gaze estimation is a typical approach used on road scenes. This indicator is of great importance for safe driving, specially on Level 3 and Level 4 automation systems, where the take over request control strategy could be based on the driver's gaze estimation. Nowadays, gaze estimation techniques used in the state-of-the-art are intrusive and costly, and these two aspects are limiting the usage of these techniques on real vehicles. To test this kind of application, there are some databases focused on critical situations in simulation, but they do not show real accidents because of the complexity and the danger to record them. Within this context, this paper presents a low-cost and non-intrusive camera-based gaze mapping system integrating the open-source state-of-the-art OpenFace 2.0 Toolkit to visualize the driver focalization on a database composed of recorded real traffic scenes through a heat map using NARMAX (Nonlinear AutoRegressive Moving Average model with eXogenous inputs) to establish the correspondence between the OpenFace 2.0 parameters and the screen region the user is looking at. This proposal is an improvement of our previous work, which was based on a linear approximation using a projection matrix. The proposal has been validated using the recent and challenging public database DADA2000, which has 2000 video sequences with annotated driving scenarios based on real accidents. We compare our proposal with our previous one and with an expensive desktop-mounted eye-tracker, obtaining on par results. We proved that this method can be used to record driver attention databases., Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Train here, drive there: ROS based end-to-end autonomous-driving pipeline validation in CARLA simulator using the NHTSA typology

  • Gómez Huélamo, Carlos
  • Egido Sierra, Javier del
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Barea Navarro, Rafael|||0000-0002-4179-6100
  • López Guillén, María Elena
  • Arango Vargas, Juan Felipe|||0000-0003-4989-9443
  • Araluce Ruiz, Javier
  • López Fernández, Joaquín
Urban complex scenarios are the most challenging situations in the field of Autonomous Driving (AD). In that sense, an AD pipeline should be tested in countless environments and scenarios, escalating the cost and development time exponentially with a physical approach. In this paper we present a validation of our fully-autonomous driving architecture using the NHTSA (National Highway Traffic Safety Administration) protocol in the CARLA simulator, focusing on the analysis of our decision-making module, based on Hierarchical Interpreted Binary Petri Nets (HIBPN). First, the paper states the importance of using hyper-realistic simulators, as a preliminary help to real test, as well as an appropriate design of the traffic scenarios as the two current keys to build safe and robust AD technology. Second, our pipeline is introduced, which exploits the concepts of standard communication in robotics using the Robot Operating System (ROS) and the Docker approach to provide the system with isolation, flexibility and portability, describing the main modules and approaches to perform the navigation. Third, the CARLA simulator is described, outlining the steps carried out to merge our architecture with the simulator and the advantages to create ad-hoc driving scenarios for use cases validation instead of just modular evaluation. Finally, the architecture is validated using some challenging driving scenarios such as Pedestrian Crossing, Stop, Adaptive Cruise Control (ACC) and Unexpected Pedestrian. Some qualitative (video files: Simulation Use Cases) and quantitative (linear velocity and trajectory splitted in the corresponding HIBPN states) results are presented for each use case, as well as an analysis of the temporal graphs associated to the Vulnerable Road Users (VRU) cases, validating our architecture in simulation as a preliminary stage before implementing it in our real autonomous electric car., Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

How to build and validate a safe and reliable Autonomous Driving stack? A ROS based software modular architecture baseline

  • Gómez Huélamo, Carlos
  • Diaz Diaz, Alejandro
  • Araluce Ruiz, Javier
  • Ortiz Huamani, Miguel Eduardo
  • Gutiérrez Moreno, Rodrigo
  • Arango Vargas, Juan Felipe|||0000-0003-4989-9443
  • Llamazares Llamazares, Ángel|||0000-0001-8273-5163
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
2022 IEEE Intelligent Vehicles Symposium (IV), 04-09 June 2022, Aachen, Germany., The implementation of Autonomous Driving stacks (ADS) is one of the most challenging engineering tasks of our era. Autonomous Vehicles (AVs) are expected to be driven in highly dynamic environments with a reliability greater than human beings and full autonomy. Furthermore, one of the most important topics is the way to democratize and accelerate the development and research of holistic validation to ensure the robustness of the vehicle. In this paper we present a powerful ROS (Robot Operating System) based modular ADS that achieves state-of-the-art results in challenging scenarios based on the CARLA (Car Learning to Act) simulator, outperforming several strong baselines in a novel evaluation setting which involves non-trivial traffic scenarios and adverse environmental conditions (Qualitative results). Our proposal ranks in second position in the CARLA Autonomous Driving Leaderboard (Map Track) and gets the best score considering modular pipelines, as a preliminary stage before implementing it in our real-world autonomous electric car. To encourage the use research in holistic development and testing, our code is publicly available at https://github.com/RobeSafe-UAH/CARLA_Leaderboard., Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

HD maps: Exploiting OpenDRIVE potential for Path Planning and Map Monitoring

  • Diaz Diaz, Alejandro
  • Ocaña Miguel, Manuel|||0000-0002-8875-1866
  • Llamazares Llamazares, Ángel|||0000-0001-8273-5163
  • Gómez Huélamo, Carlos
  • Revenga de Toro, Pedro Alfonso|||0000-0003-2550-5972
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
2022 IEEE Intelligent Vehicles Symposium (IV), 04-09 June 2022, Aachen, Germany., Autonomous vehicle (AV) is one of the most challenging engineering tasks of our era. High-Definition (HD) maps are a fundamental tool in the development of AVs, being considered as pseudo sensors that provide a trusted baseline that other sensors cannot. Our approach is focused on the use of OpenDRIVE standard based HD maps in order to conduct the different mapping and planning tasks involved in Autonomous Driving (AD). In this paper we present a method for exploiting the HD map potential for two specific purposes: i) Global Path Planning and ii) Monitoring the relevant lanes and regulatory elements around the ego-vehicle to support the perception module. Mapping and planning modules are connected to the other modules of the AV stack by using ROS (Robot Operating System). Our AD architecture has been validated both in local and CARLA Autonomous Driving Leaderboard cloud, where we can appreciate a considerable improvement in the metrics by incorporating information from the HD map, not only used to conduct the Global Path Planning task but also providing prior information to the Perception module. Code is available in https://github.com/AlejandroDiazD/opendrive-mapping-planning., Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

360º real-time and power-efficient 3D DAMOT for autonomous driving applications

  • Gómez Huélamo, Carlos
  • Egido Sierra, Javier del
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Barea Navarro, Rafael|||0000-0002-4179-6100
  • López Guillén, María Elena
  • Araluce Ruiz, Javier
  • Antunes García, Miguel|||0009-0008-5627-5325
Autonomous Driving (AD) promises an efficient, comfortable and safe driving experience. Nevertheless, fatalities involving vehicles equipped with Automated Driving Systems (ADSs) are on the rise, especially those related to the perception module of the vehicle. This paper presents a real-time and power-efficient 3D Multi-Object Detection and Tracking (DAMOT) method proposed for Intelligent Vehicles (IV) applications, allowing the vehicle to track 360º surrounding objects as a preliminary stage to perform trajectory forecasting to prevent collisions and anticipate the ego-vehicle to future traffic scenarios. First, we present our DAMOT pipeline based on Fast Encoders for object detection and a combination of a 3D Kalman Filter and Hungarian Algorithm, used for state estimation and data association respectively. We extend our previous work ellaborating a preliminary version of sensor fusion based DAMOT, merging the extracted features by a Convolutional Neural Network (CNN) using camera information for long-term re-identification and obstacles retrieved by the 3D object detector. Both pipelines exploit the concepts of lightweight Linux containers using the Docker approach to provide the system with isolation, flexibility and portability, and standard communication in robotics using the Robot Operating System (ROS). Second, both pipelines are validated using the recently proposed KITTI-3DMOT evaluation tool that demonstrates the full strength of 3D localization and tracking of a MOT system. Finally, the most efficient architecture is validated in some interesting traffic scenarios implemented in the CARLA (Car Learning to Act) open-source driving simulator and in our real-world autonomous electric car using the NVIDIA AGX Xavier, an AI embedded system for autonomous machines, studying its performance in a controlled but realistic urban environment with real-time execution (results)., Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Fine-tuning your answers: a bag of tricks for improving VQA models

  • Arroyo, Roberto
  • Álvarez, Sergio
  • Aller, Aitor
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Ortiz Huamani, Miguel Eduardo
In this paper, one of the most novel topics in Deep Learning (DL) is explored: Visual Question Answering (VQA). This research area uses three of the most important fields in Artificial Intelligence (AI) to automatically provide natural language answers for questions that a user can ask about an image. These fields are: 1) Computer Vision (CV), 2) Natural Language Processing (NLP) and 3) Knowledge Representation & Reasoning (KR&R). Initially, a review of the state of art in VQA and our contributions to it are discussed. Then, we build upon the ideas provided by Pythia, which is one of the most outstanding approaches. Therefore, a study of the Pythia’s architecture is carried out with the aim of presenting varied enhancements with respect to the original proposal in order to fine-tune models using a bag of tricks. Several training strategies are compared to increase the global accuracy and understand the limitations associated with VQA models. Extended results check the impact of the different tricks over our enhanced architecture, jointly with additional qualitative results., Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Drive-by-Wire development process based on ROS for an electric autonomous vehicle

  • Arango Vargas, Juan Felipe|||0000-0003-4989-9443
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Revenga de Toro, Pedro Alfonso|||0000-0003-2550-5972
  • Barea Navarro, Rafael|||0000-0002-4179-6100
  • Araluce Ruiz, Javier
  • Gutiérrez Moreno, Rodrigo
  • López Guillén, María Elena
  • Gómez Huélamo, Carlos
This paper presents the development process of a robust and ROS-based Drive-By-Wire system designed for an autonomous electric vehicle from scratch over an open source chassis. A revision of the vehicle characteristics and the different modules of our navigation architecture is carried out to put in context our Drive-by-Wire system. The system is composed of a Steer-By-Wire module and a Throttle-By-Wire module that allow driving the vehicle by using some commands of lineal speed and curvature, which are sent through a local network from the control unit of the vehicle. Additionally, a Manual/Automatic switching system has been implemented, which allows the driver to activate the autonomous driving and safely taking control of the vehicle at any time. Finally, some validation tests were performed for our Drive-By-Wire system, as a part of our whole autonomous navigation architecture, showing the good working of our proposal. The results prove that the Drive-By-Wire system has the behaviour and necessary requirements to automate an electric vehicle. In addition, after 812 h of testing, it was proven that it is a robust Drive-By-Wire system, with high reliability. The developed system is the basis for the validation and implementation of new autonomous navigation techniques developed within the group in a real vehicle., Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Autonomous vehicle control in CARLA Challenge

  • Egido Sierra, Javier del
  • Pérez Gil, Óscar
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
Congreso Campus FIT 2020. 24-26 junio 2020, online, The introduction of Autonomous Vehicles (AVs) in a realistic urban environment is an ambitious objective. AV validation on real scenarios involving actual objects such as cars or pedestrians in a wide range of traffic cases would escalate the cost and could generate hazardous situations. Consequently, autonomous driving simulators are quickly evolving to cover the gap to achieve a fully autonomous driving architecture validation. Most used 3D simulators in self-driving cars field are V-REP (Rohmer, E., 2013) and Gazebo (KOENIG, N. and HOWARD, A., 2004), due to an easy integration with ROS (QUIGLEY, 2009) platform to increase the interoperability with other systems. Those simulators provide accurate motion information (more appropriate for easier scenes like robotic arms) but not a realistic appearance and not allowing real-time systems, not being able to recreate complex traffic scenes. CARLA (DOSOVITSKIY, A., 2017) open-source AV simulator is designed to be able to train and validate control and perception algorithms in complex traffic scenarios with hyper-realistic environments. CARLA simulator allows to easily modify on-board sensors such as cameras or LiDAR, weather conditions and also the traffic scene to perform specific traffic cases. In Summer 2019, CARLA launched its driving challenge to allow everyone to test their own control techniques under the same traffic scenarios, scoring its performance regarding traffic rules. In this paper, the Robesafe researching group approach will be explained, detailing vehicle motion control and object detection adapted from Smart Elderly Car (GÓMEZ-HUÉLAMO, C., 2019) that lead the group to reach the 4th place in Track 3 challenge, where HD Map, Waypoints and environmental sensors data (LiDAR, RGB cameras and GPS) were provided., Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Real-Time Bird's Eye View Multi-Object Tracking system based on Fast Encoders for object detection

  • Gómez Huélamo, Carlos
  • Egido Sierra, Javier del
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Barea Navarro, Rafael|||0000-0002-4179-6100
  • Ocaña Miguel, Manuel|||0000-0002-8875-1866
  • Arango Vargas, Juan Felipe|||0000-0003-4989-9443
  • Gutiérrez Moreno, Rodrigo
2020 IEEE 23rd International Conference on Intelligent Transportation Systems (ITSC), September 20-23, 2020, Rhodes, Greece. Virtual Conference., This paper presents a Real-Time Bird’s Eye View Multi Object Tracking (MOT) system pipeline for an Autonomous Electric car, based on Fast Encoders for object detection and a combination of Hungarian algorithm and Bird’s Eye View (BEV) Kalman Filter, respectively used for data association and state estimation. The system is able to analyze 360 degrees around the ego-vehicle as well as estimate the future trajectories of the environment objects, being the essential input for other layers of a self-driving architecture, such as the control or decision-making. First, our system pipeline is described, merging the concepts of online and realtime DATMO (Deteccion and Tracking of Multiple Objects), ROS (Robot Operating System) and Docker to enhance the integration of the proposed MOT system in fully-autonomous driving architectures. Second, the system pipeline is validated using the recently proposed KITTI-3DMOT evaluation tool that demonstrates the full strength of 3D localization and tracking of a MOT system. Finally, a comparison of our proposal with other state-of-the-art approaches is carried out in terms of performance by using the mainstream metrics used on MOT benchmarks and the recently proposed integral MOT metrics, evaluating the performance of the tracking system over all detection thresholds., Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A waypoint tracking controller for autonomous road vehicles using ROS framework

  • Gutiérrez Moreno, Rodrigo
  • López Guillén, María Elena
  • Pérez Gil, Óscar
  • Barea Navarro, Rafael|||0000-0002-4179-6100
  • Bergasa Pascual, Luis Miguel|||0000-0002-0087-3077
  • Gómez Huélamo, Carlos
  • Egido Sierra, Javier del
  • López Fernández, Joaquín
Automated Driving Systems (ADSs) require robust and scalable control systems in order to achieve a safe, efficient and comfortable driving experience. Most global planners for autonomous vehicles provide as output a sequence of waypoints to be followed. This paper proposes a modular and scalable waypoint tracking controller for Robot Operating System (ROS)-based autonomous guided vehicles. The proposed controller performs a smooth interpolation of the waypoints and uses optimal control techniques to ensure robust trajectory tracking even at high speeds in urban environments (up to 50 km/h). The delays in the localization system and actuators are compensated in the control loop to stabilize the system. Forward velocity is adapted to path characteristics using a velocity profiler. The controller has been implemented as an ROS package providing scalability and exportability to the system in order to be used with a wide variety of simulators and real vehicles. We show the results of this controller using the novel and hyper realistic CARLA Simulator and carrying out a comparison with other standard and state-of-art trajectory tracking controllers., Agencia Estatal de Investigación, Comunidad de Madrid