Pasar al contenido principal

QUIMICA DEL CARBON MARRON: MODELIZACION DE LA ABSORCION DE AMONIACO POR LOS AEROSOLES ORGANICOS SECUNDARIOS Y SU EFECTO EN EL FORZAMIENTO RADIATIVO

RTI2018-099894-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario BARCELONA SUPERCOMPUTING CENTER CENTRO NACIONAL DE SUPERCOMPUTACION

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A new NMVOC speciated inventory for a reactivity-based approach to support ozone control strategies in Spain

  • Oliveira, K.
  • Guevara, M.
  • Jorba, O.
  • Querol, Xavier
  • García-Pando, C. Pérez
Ozone (O3) pollution is a persistent problem in many regions of Spain, so understanding O3 precursor emissions and trends is essential to design effective control strategies. We estimated the impact of Non-Methane Volatile Organic Compounds (NMVOC) species upon O3 formation potential (OFP) using the maximum incremental reactivity approach. For this, we developed a speciated NMVOC emission inventory for Spain from 2010 to 2019 combining national reported emissions with state-of-the-art speciation profiles, which resulted in a database of emissions for over 900 individual NMVOC species and 153 individual sectors. Additionally, we analysed 2030 emission projections to quantify the expected impact of planned measures on future OFP levels. Overall, the main activities contributing to OFP in Spain are paint manufacturing and applications (20 %), manure management (16 %), and domestic solvent use (6 %). These activities contribute unevenly across regions. The more urbanised areas report a larger contribution from the solvent sector (64 % in Madrid), while in rural areas, manure management and agricultural waste burning gain importance (24 % in Extremadura), indicating that local control measures should be implemented. The top 10 NMVOC species contributing to OFP are ethanol, ethene, xylenes, propene, toluene, formaldehyde, 1,3-butadiene, styrene, n-butane, and cyclopentane, which together are responsible for 54 % of the total OFP. Our trend analysis indicates a reduction of NMVOC emissions and OFP of -5 % and -10 % between 2010 and 2019, respectively. The larger decrease in OFP is driven by a bigger reduction in xylenes (-29 %) and toluene (-28 %) from paint application industries and the road transport sector. By 2030 a significant increase (+37 %) in the OFP from the public electricity sector is expected due to the planned increase in biomass use for power generation. Our results indicate that policies should focus on paint reformulation, limiting aerosol products, and implementing NMVOC control devices in future biomass power plants., The research leading to these results has received funding from the Ministerio para la Transición Ecológica y el Reto Demográfico (MITECO) as part of the Plan Nacional del Ozono project (BOE-A-2021-20183); from the Ministerio de Ciencia, Innovación y Universidades (MICINN) as part of the BROWNING project RTI2018-099894-B-I00; from the VITALISE project (PID2019-108086RA-I00) funded by MCIN/AEI/10.13039/501100011033; from the AXA Research Fund; and from the European Research Council (grant no. 773051, FRAGMENT). K. Oliveira acknowledges the support received by the grant PRE2020 − 092616 funded by MCIN/AEI/10.13039/501100011033 and ESF Investing in your future. The authors would also like to acknowledge M.J. Alonso, J. Pérez-Ilzarbe, and N. Alonso from MITECO for the information provided on the emission inventory and their feedback on the analysis of the results; to Antonella Gutierrez (TRAGSATEC) for her input on the parts of the manuscript related to emission legislation, and to Dr. Erika von Schneidemesser (IASS) for her feedback on the title of the paper. We thank the anonymous reviewers for their careful reading of our manuscript and their many insightful comments and suggestions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Uncertainties in source allocation of carbonaceous aerosols in a Mediterranean region

  • Navarro-Barboza, Hector
  • Pandolfi, Marco
  • Guevara, Marc
  • Enciso, Santiago
  • Tena, Carles
  • Via, Marta
  • Yus-Díez, Jesus
  • Reche, Cristina
  • Pérez, Noemi
  • Alastuey, Andrés
  • Querol, Xavier
  • Jorba, Oriol
Understanding the atmospheric processes involving carbonaceous aerosols (CAs) is crucial for assessing air pollution impacts on human health and climate. The sources and formation mechanisms of CAs are not well understood, making it challenging to quantify impacts in models. Studies suggest residential wood combustion (RWC) and traffic significantly contribute to CAs in Europe's urban and rural areas. Here, we used an atmospheric chemistry model (MONARCH) and three different emission inventories (two versions of the European-scale emission inventory CAMS-REG_v4 and the HERMESv3 detailed national inventory for Spain) to assess the uncertainties in CAs simulation and source allocation (from traffic, RWC, shipping, fires and others) in Northeast Spain. For this, black carbon (BC) and organic aerosol (OA) measurements performed at three supersites representing different environments (urban, regional and remote) were used. Our findings show the importance of model resolution and detailed emission input data in accurately reproducing BC/OA observations. Even though emissions of total particulate matter are rather consistent between inventories in Spain, we found discrepancies between them mainly related to the spatiotemporal disaggregation (particularly relevant for traffic and RWC) and the treatment of the condensable fraction of CAs in RWC (changes in the speciation of elemental/organic carbon). The main source contribution to BC concentrations in the urban site is traffic, accounting for 71.1%/65.2% (January/July) in close agreement with the fossil contribution derived from observations (78.8%/84.2%), followed by RWC (12.8%/3%) and shipping emissions (5.4%/13.8%). An over-representation of RWC (winter) and shipping (summer) is obtained with CAMS-REG_v4. Noteworthy uncertainties arise in OA results due to condensables in emissions and a limited secondary aerosol production in the model. These findings offer insights into MONARCH's effectiveness in simulating CAs concentrations and source contribution in Northeast Spain. The study highlights the benefits of combining new datasets and modeling techniques to refine emission inventories and better understand and mitigate air pollution impacts., Hector Navarro-Barboza acknowledges financial support from the Spanish Ministry for Science and Innovation (FPI PRE2018-084988 financed by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future). The research leading to these results has received funding from the Ministerio de Ciencia, Innovación y Universidades as part of the BROWNING project (Grant No. RTI2018-099894-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by ”ERDF A way of making Europe”) and the Ministerio de Asuntos Económicos y Transformación Digital, Gobierno de España as part of the CAIAC project (Grant No. PID2019-108990 PB-100). This project has received funding from the Agencia Estatal Consejo Superior de Investigaciones Científicas (CSIC) under the Project 202030E261, and the Generalitat de Catalunya, by AGAUR (2021 SGR 00447) and the Direcció General de Qualitat Ambiental i Canvi Climàtic (DGQACC). This project has also received funding from the European Union’s Horizon Europe research and innovation programme under the RI-URBANs project (grant agreement No 101036245). IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Grant No. CEX2018-000794-S). BSC researchers thankfully acknowledge the computer resources at Marenostrum and the technical support provided by Barcelona Supercomputing Center (RES-AECT-2021–1-0027, RES-AECT-2021–2-0001)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

GHOST: A globally harmonised dataset of surface atmospheric composition measurements

  • Bowdalo, Dene
  • Grodofzig, Raphael
  • Jaimes Palomera, Mónica
  • Rivera Hernández, Olivia
  • Puchalski, Melissa
  • Gay, David
  • Klausen, Jörg
  • Moreno, Sergio
  • Netcheva, Stoyka
  • Tarasova, Oksana
  • Basart, Sara
  • Guevara, Marc
  • Jorba, Oriol
  • Pandolfi, Marco
  • Rovira, Jordi
[Data Access] The data processed in version 1.5.1 was a result of research undertaken in two separate projects. The processing and creation of new aerosol optical property products was done within the FOCI project, and the processing and creation of precipitation chemistry and wet deposition products was funded by the World Meteorological Organization for the Measurement-Model Fusion for Total Global Atmospheric Deposition WMO Initiative. The processed data is designed to be complementary to the data provided in version 1.5 of GHOST. The data is separated out per network, per temporal resolution, per component, and is saved as netCDF4 files, per year and month. There is additionally one synthetic network entitled "GHOST", which aggregates data across all networks. The dataset is compressed as .zip files per network. Beneath each network, collections of files per temporal resolution, per component, are compressed as tar.xz files. Each network .zip file can be decompressed via the following syntax: unzip [network].zip Component tar.xz files can be decompressed via the following syntax: tar -xf [component].tar.xz, [How to Use] Inside the GHOST dataset are a plethora of variables, thus it can difficult to fully exploit the extent of the available information. For this reason a companion publication has been written, detailing every aspect of the GHOST dataset: https://doi.org/10.5194/essd-2023-397 If you have any other doubts of queries regarding the dataset, please email: dene.bowdalo@bsc.es, [How to Cite] If you plan to use this work please kindly cite both this dataset and the describing publication: Bowdalo, D.: GHOST: A globally harmonised dataset of surface atmospheric composition measurements, Zenodo [data set], https://doi.org/10.5281/zenodo.10637449, 2024. Bowdalo, D., Basart, S., Guevara, M., Jorba, O., Pérez García-Pando, C., Jaimes Palomera, M., Rivera Hernandez, O., Puchalski, M., Gay, D., Klausen, J., Moreno, S., Netcheva, S., and Tarasova, O.: GHOST: A globally harmonised dataset of surface atmospheric composition measurements, Earth Syst. Sci. Data, 16, 4417–4495, https://doi.org/10.5194/essd-16-4417-2024, 2024., [GHOST] Globally Harmonised Observations in Space and Time, represents one of the biggest collection of harmonised measurements of atmospheric composition at the surface. In total, ~10 billion measurements from 1970-2025, of ~600 different components, from ~40 reporting networks, are compiled, parsed, and standardised. Components processed include gaseous species, total and speciated particulate matter, and aerosol optical properties. The main goal of GHOST is to provide a dataset that can serve as a basis for the reproducibility of model evaluation efforts across the community. Exhaustive efforts have been made towards standardising almost every facet of provided information from the major public reporting networks, saved in 21 data variables, and 163 metadata variables. Extensive effort in particular is put towards the standardisation of measurement process information, and station classifications. Extra complementary information is also associated with measurements, such as metadata from various popular gridded datasets (e.g. land use), and temporal classifications per measurement (e.g. day / night). A range of standardised network quality assurance flags are associated with each individual measurement. GHOST own quality assurance is also performed and associated with measurements. Measurements prefiltered by some default GHOST quality assurance are also provided., We gratefully acknowledge all data providers for the substantial work done in establishing and maintaining the measuring stations that provide the data contained in this dataset. We would also like to warmly thank all data providers who met with GHOST authors through this work, and for all support given, from helping resolve data rights issues, to giving suggestions for improvements. We acknowledge the computing resources of MareNostrum, and the technical support provided by the Barcelona Supercomputing Center (AECT-2020-1-0007, AECT-2021-1-0027, AECT-2022-1-0008, and AECT-2022-3-0013). We also acknowledge the Red Temática ACTRIS España (CGL2017-90884-REDT), and the H2020 project ACTRIS IMP (\#871115). The processing and creation of new aerosol optical property products was funded by EU HORIZON EUROPE under grant agreement no. 101056783 (FOCI project), and the processing and creation of precipitation chemistry and wet deposition products was funded by the World Meteorological Organization for the Measurement-Model Fusion for Total Global Atmospheric Deposition WMO Initiative. The research leading to the creation of this dataset has also received funding from the grant RTI2018-099894-BI00 funded by MCIN/AEI/ 10.13039/501100011033 (BROWNING), the EU H2020 Framework Programme under grant agreement No. GA 821205 (FORCES), the European Research Council under the Horizon 2020 research and innovation programme through the ERC Consolidator Grant grant agreement No. 773051 (FRAGMENT), the AXA Research Fund (AXA Chair on Sand and Dust Storms at the Barcelona Supercomputing Center), and the Department of Research and Universities of the Government of Catalonia through the Atmospheric Composition Research Group (code 2021 SGR 01550)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

HERMESv3, a stand-alone multi-scale atmospheric emission modelling framework – part 2: the bottom–up module

  • Guevara Vilardell, Marc|||0000-0001-9727-8583
  • Tena, Carles|||0000-0002-5768-6758
  • Porquet, Manuel|||0000-0002-5127-0153
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
  • Pérez García-Pando, Carlos|||0000-0002-4456-0697
We describe the bottom–up module of the High-Elective Resolution Modelling Emission System version 3 (HERMESv3), a Python-based and multi-scale modelling tool intended for the processing and computation of atmospheric emissions for air quality modelling. HERMESv3 is composed of two separate modules: the global_regional module and the bottom_up module. In a companion paper (Part 1, Guevara et al., 2019a) we presented the global_regional module. The bottom_up module described in this contribution is an emission model that estimates anthropogenic emissions at high spatial- (e.g. road link level,) and temporal- (hourly) resolution using state-of-the-art calculation methods that combine local activity and emission factors along with meteorological data. The model computes bottom–up emissions from point sources, road transport, residential and commercial combustion, other mobile sources, and agricultural activities. The computed pollutants include the main criteria pollutants (i.e. NOx, CO, NMVOCs (non-methane volatile organic compounds), SOx, NH3, PM10 and PM2.5) and greenhouse gases (i.e. CO2 and CH4, only related to combustion processes). Specific emission estimation methodologies are provided for each source and are mostly based on (but not limited to) the calculation methodologies reported by the European EMEP/EEA air pollutant emission inventory guidebook. Meteorologically dependent functions are also included to take into account the dynamical component of the emission processes. The model also provides several functionalities for automatically manipulating and performing spatial operations on georeferenced objects (shapefiles and raster files). The model is designed so that it can be applicable to any European country or region where the required input data are available. As in the case of the global_regional module, emissions can be estimated on several user-defined grids, mapped to multiple chemical mechanisms and adapted to the input requirements of different atmospheric chemistry models (CMAQ, WRF-Chem and MONARCH) as well as a street-level dispersion model (R-LINE). Specific emission outputs generated by the model are presented and discussed to illustrate its capabilities., This research has been supported by the Ministerio de Ciencia, Innovación y Universidades (grant no. CGL2016-75725-R), the Ministerio de Ciencia, Innovación y Universidades (grant no. RTI2018-099894-B-I00), the Ministerio de Ciencia, Innovación y Universidades (grant no. RYC-2015-18690), and the AXA Research Fund (grant no. AXA Research Fund)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Meteorology-normalized impact of the COVID-19 lockdown upon NO2 pollution in Spain

  • Petetin, Hervé
  • Bowdalo, Dene
  • Soret, Albert|||0000-0002-1962-2972
  • Guevara Vilardell, Marc|||0000-0001-9727-8583
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
  • Serradell Maronda, Kim|||0000-0001-8230-4347
  • Pérez García-Pando, Carlos|||0000-0002-4456-0697
The spread of the new coronavirus SARS-CoV-2 that causes COVID-19 forced the Spanish Government to implement extensive lockdown measures to reduce the number of hospital admissions, starting on 14 March 2020. Over the following days and weeks, strong reductions in nitrogen dioxide (NO2) pollution were reported in many regions of Spain. A substantial part of these reductions was obviously due to decreased local and regional anthropogenic emissions. Yet, the confounding effect of meteorological variability hinders a reliable quantification of the lockdown's impact upon the observed pollution levels. Our study uses machine-learning (ML) models fed by meteorological data along with other time features to estimate the “business-as-usual” NO2 mixing ratios that would have been observed in the absence of the lockdown. We then quantify the so-called meteorology-normalized NO2 reductions induced by the lockdown measures by comparing the estimated business-as-usual values with the observed NO2 mixing ratios. We applied this analysis for a selection of urban background and traffic stations covering the more than 50 Spanish provinces and islands. The ML predictive models were found to perform remarkably well in most locations, with an overall bias, root mean square error and correlation of +4 %, 29 % and 0.86, respectively. During the period of study, from the enforcement of the state of alarm in Spain on 14 March to 23 April, we found the lockdown measures to be responsible for a 50 % reduction in NO2 levels on average over all provinces and islands. The lockdown in Spain has gone through several phases with different levels of severity with respect to mobility restrictions. As expected, the meteorology-normalized change in NO2 was found to be stronger during phase II (the most stringent phase) and phase III of the lockdown than during phase I. In the largest agglomerations, where both urban background and traffic stations were available, a stronger meteorology-normalized NO2 change is highlighted at traffic stations compared with urban background sites. Our results are consistent with foreseen (although still uncertain) changes in anthropogenic emissions induced by the lockdown. We also show the importance of taking the meteorological variability into account for accurately assessing the impact of the lockdown on NO2 levels, in particular at fine spatial and temporal scales. Meteorology-normalized estimates such as those presented here are crucial to reliably quantify the health implications of the lockdown due to reduced air pollution., This project has received funding from the European Union's Horizon 2020 (H2020) research and innovation program under the Marie Skłodowska-Curie Actions (grant no. H2020-MSCA-COFUND-2016-754433) and the H2020 ACTRIS IMP project (grant no. 871115). We also acknowledge support from the European Research Council (grant no. 773051; FRAGMENT); the AXA Research Fund; the Spanish Ministry of Science, Innovation and Universities (grant nos. RYC-2015-18690, CGL2017-88911-R, RTI2018-099894-B-I00 and Red Temática ACTRIS España CGL2017-90884-REDT); and the BSC-CNS “Centro de Excelencia Severo Ochoa 2015-2019” program (grant no. SEV-2015-0493). The authors are grateful to PRACE for awarding us access to MareNostrum Supercomputer in the Barcelona Supercomputing Center., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Uncertainties in source allocation of carbonaceous aerosols in a Mediterranean region

  • Navarro Barboza, Héctor|||0000-0001-7362-2845
  • Pandolfi, Marco
  • Guevara Vilardell, Marc|||0000-0001-9727-8583
  • Enciso Morales, Santiago Adolfo
  • Tena Medina, Carles
  • Via González, Marta
  • Yús-Díez, Jesús
  • Reche Andúgar, Cristina
  • Perez Lozano, Noemi
  • Alastuey Urós, Andrés
  • Querol Carceller, Xavier
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
Understanding the atmospheric processes involving carbonaceous aerosols (CAs) is crucial for assessing air pollution impacts on human health and climate. The sources and formation mechanisms of CAs are not well understood, making it challenging to quantify impacts in models. Studies suggest residential wood combustion (RWC) and traffic significantly contribute to CAs in Europe’s urban and rural areas. Here, we used an atmospheric chemistry model (MONARCH) and three different emission inventories (two versions of the European-scale emission inventory CAMS-REG_v4 and the HERMESv3 detailed national inventory for Spain) to assess the uncertainties in CAs simulation and source allocation (from traffic, RWC, shipping, fires and others) in Northeast Spain. For this, black carbon (BC) and organic aerosol (OA) measurements performed at three supersites representing different environments (urban, regional and remote) were used. Our findings show the importance of model resolution and detailed emission input data in accurately reproducing BC/OA observations. Even though emissions of total particulate matter are rather consistent between inventories in Spain, we found discrepancies between them mainly related to the spatiotemporal disaggregation (particularly relevant for traffic and RWC) and the treatment of the condensable fraction of CAs in RWC (changes in the speciation of elemental/organic carbon). The main source contribution to BC concentrations in the urban site is traffic, accounting for (January/July) in close agreement with the fossil contribution derived from observations (), followed by RWC () and shipping emissions ( ). An over-representation of RWC (winter) and shipping (summer) is obtained with CAMS-REG_v4. Noteworthy uncertainties arise in OA results due to condensables in emissions and a limited secondary aerosol production in the model. These findings offer insights into MONARCH’s effectiveness in simulating CAs concentrations and source contribution in Northeast Spain. The study highlights the benefits of combining new datasets and modeling techniques to refine emission inventories and better understand and mitigate air pollution impacts., Hector Navarro-Barboza acknowledges financial support from the Spanish Ministry for Science and Innovation (FPI PRE2018-084988 financed by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future). The research leading to these results has received funding from the Ministerio de Ciencia, Innovación y Universidades as H. Navarro-Barboza et al. Environment International 183 (2024) 108252 18 part of the BROWNING project (Grant No. RTI2018-099894-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by ”ERDF A way of making Europe”) and the Ministerio de Asuntos Económicos y Transformaciön Digital, Gobierno de España as part of the CAIAC project (Grant No. PID2019-108990 PB-100). This project has received funding from the Agencia Estatal Consejo Superior de Investigaciones Científicas (CSIC) under the Project 202030E261, and the Generalitat de Catalunya, by AGAUR (2021 SGR 00447) and the Direcció General de Qualitat Ambiental i Canvi Climàtic (DGQACC). This project has also received funding from the European Union’s Horizon Europe research and innovation programme under the RI-URBANs project (grant agreement No 101036245). IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Grant No. CEX2018- 000794-S). BSC researchers thankfully acknowledge the computer resources at Marenostrum and the technical support provided by Barcelona Supercomputing Center (RES-AECT-2021–1-0027, RES-AECT-2021–2-0001), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A global catalogue of CO2 emissions and co-emitted species from power plants, including high-resolution vertical and temporal profiles

  • Guevara Vilardell, Marc|||0000-0001-9727-8583
  • Enciso Morales, Santiago Adolfo
  • Tena Medina, Carles
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
  • Dellaert, Stijn
  • Denier Van der Gon, Hugo
  • García Pando, Carlos Pérez
We present a high-resolution global emission catalogue of CO2 and co-emitted species (NOx, SO2, CO, CH4) from thermal power plants for the year 2018. The construction of the database follows a bottom-up approach, which combines plant-specific information with national energy consumption statistics and fuel-dependent emission factors for CO2 and emission ratios for co-emitted species (e.g. the amount of NOx emitted relative to CO2: NOx/CO2 ). The resulting catalogue contains annual emission information for more than 16 000 individual facilities at their exact geographical locations. Each facility is linked to a country- and fuel-dependent temporal profile (i.e. monthly, day of the week and hourly) and a plant-level vertical profile, which were derived from national electricity generation statistics and plume rise calculations that combine stack parameters with meteorological information. The combination of the aforementioned information allows us to derive high-resolution spatial and temporal emissions for modelling purposes. Estimated annual emissions were compared against independent plant- and country-level inventories, including Carbon Monitoring for Action (CARMA), the Global Infrastructure emission Database (GID) and the Emissions Database for Global Atmospheric Research (EDGAR), as well as officially reported emission data. Overall good agreement is observed between datasets when comparing the CO2 emissions. The main discrepancies are related to the non-inclusion of auto-producer or heat-only facilities in certain countries due to a lack of data. Larger inconsistencies are obtained when comparing emissions from co-emitted species due to uncertainties in the fuel-, country- and region-dependent emission ratios and gap-filling procedures. The temporal distribution of emissions obtained in this work was compared against traditional sector-dependent profiles that are widely used in modelling efforts. This highlighted important differences and the need to consider country dependencies when temporally distributing emissions. The resulting catalogue (https://doi.org/10.24380/0a9o-v7xe, Guevara et al., 2023) is developed in the framework of the Prototype System for a Copernicus CO2 service (CoCO2) European Union (EU)-funded project to support the development of the Copernicus CO2 Monitoring and Verification Support capacity (CO2MVS)., This research has been supported by the Horizon 2020 research and innovation programme (grant no. 958927), the European Centre for Medium-Range Weather Forecasts (grant no. CAMS2_61), the Agencia Estatal de Investigación (grant no. PID2019-108086RA-I00), the Ministerio de Ciencia, Innovación y Universidades (grant no. RTI2018099894-BI00), the AXA Research Fund (AXA Chair on Sand and Dust Storms) and the European Research Council (grant no. 773051)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Data fusion uncertainty-enabled methods to map street-scale hourly NO2 in Barcelona: a case study with CALIOPE-Urban v1.0

  • Criado, Alvaro
  • Mateu Armengol, Jan|||0000-0001-5440-0673
  • Petetin, Hervé
  • Rodriguez Rey, Daniel
  • Benavides, Jaime
  • Guevara Vilardell, Marc|||0000-0001-9727-8583
  • Pérez García-Pando, Carlos|||0000-0002-4456-0697
  • Soret, Albert|||0000-0002-1962-2972
  • Jorba, Oriol
Comprehensive monitoring of NO2 exceedances is imperative for protecting human health, especially in urban areas with traffic. However, an accurate spatial characterization of the exceedances is challenging due to the typically low density of air quality monitoring stations and the inherent uncertainties in urban air quality models. We study how observational data from different sources and timescales can be combined with a dispersion air quality model to obtain bias-corrected NO2 hourly maps at the street scale. We present a kriging-based data fusion workflow that merges dispersion model output with continuous hourly observations and uses a machine-learning-based land use regression (LUR) model constrained with past short intensive passive dosimeter campaign measurements. While the hourly observations allow the bias adjustment of the temporal variability in the dispersion model, the microscale LUR model adds information on the NO2 spatial patterns. Our method includes an uncertainty calculation based on the estimated error variance of the universal kriging technique, which is subsequently used to produce urban maps of probability of exceeding the 200 µg m−3 hourly and the 40 µg m−3 annual NO2 average limits. We assess the statistical performance of this approach in the city of Barcelona for the year 2019. Our results show that simply merging the monitoring stations with the model output already significantly increases the correlation coefficient (r) by +29 % and decreases the root mean square error (RMSE) by −32 %. When adding the time-invariant microscale LUR model in the data fusion workflow, the improvement is even more remarkable, with +46 % and −48 % for the r and RMSE, respectively. Our work highlights the usefulness of high-resolution spatial information in data fusion methods to better estimate exceedances at the street scale., We have received support from the Barcelona City Council through the UncertAIR project (ID 22S09501-001; Recerca Jove i emergent 2022). This research has been supported by the Ministerio de Ciencia e Innovación through the BROWNING project (grant no. RTI2018-099894-BI00), the Agencia Estatal de Investigación as part of the VITALISE project (grant no. PID2019-108086RA-I00) and the MITIGATE project (grant no. PID2020-116324RA695 I00), the H2020 Marie Skłodowska-Curie Actions (grant no. H2020-MSCA-COFUND-2016-754433), the AXA Research Fund, and the Barcelona Supercomputing Center (grant nos. RES-AECT-2021-1-0027 and RES-AECT-2021-2-0001)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A new NMVOC speciated inventory for a reactivity-based approach to support ozone control strategies in Spain

  • Oliveira, Kevin de
  • Guevara Vilardell, Marc|||0000-0001-9727-8583
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
  • Querol Carceller, Xavier
  • Pérez García-Pando, Carlos|||0000-0002-4456-0697
Ozone (O3) pollution is a persistent problem in many regions of Spain, so understanding O3 precursor emissions and trends is essential to design effective control strategies. We estimated the impact of Non-Methane Volatile Organic Compounds (NMVOC) species upon O3 formation potential (OFP) using the maximum incremental reactivity approach. For this, we developed a speciated NMVOC emission inventory for Spain from 2010 to 2019 combining national reported emissions with state-of-the-art speciation profiles, which resulted in a database of emissions for over 900 individual NMVOC species and 153 individual sectors. Additionally, we analysed 2030 emission projections to quantify the expected impact of planned measures on future OFP levels. Overall, the main activities contributing to OFP in Spain are paint manufacturing and applications (20 %), manure management (16 %), and domestic solvent use (6 %). These activities contribute unevenly across regions. The more urbanised areas report a larger contribution from the solvent sector (64 % in Madrid), while in rural areas, manure management and agricultural waste burning gain importance (24 % in Extremadura), indicating that local control measures should be implemented. The top 10 NMVOC species contributing to OFP are ethanol, ethene, xylenes, propene, toluene, formaldehyde, 1,3-butadiene, styrene, n-butane, and cyclopentane, which together are responsible for 54 % of the total OFP. Our trend analysis indicates a reduction of NMVOC emissions and OFP of -5 % and -10 % between 2010 and 2019, respectively. The larger decrease in OFP is driven by a bigger reduction in xylenes (-29 %) and toluene (-28 %) from paint application industries and the road transport sector. By 2030 a significant increase (+37 %) in the OFP from the public electricity sector is expected due to the planned increase in biomass use for power generation. Our results indicate that policies should focus on paint reformulation, limiting aerosol products, and implementing NMVOC control devices in future biomass power plants., The research leading to these results has received funding from the Ministerio para la Transición Ecológica y el Reto Demográfico (MITECO) as part of the Plan Nacional del Ozono project (BOE-A-2021-20183); from the Ministerio de Ciencia, Innovación y Universidades (MICINN) as part of the BROWNING project RTI2018-099894-B-I00; from the VITALISE project (PID2019-108086RA-I00) funded by MCIN/AEI/10.13039/ 501100011033; from the AXA Research Fund; and from the European Research Council (grant no. 773051, FRAGMENT). K. Oliveira acknowledges the support received by the grant PRE2020 − 092616 funded by MCIN/ AEI/10.13039/501100011033 and ESF Investing in your future., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

CALIOPE-Urban v1.0: coupling R-LINE with a mesoscale air quality modelling system for urban air quality forecasts over Barcelona city (Spain)

  • Benavides, Jaime
  • Snyder, Michelle
  • Guevara Vilardell, Marc|||0000-0001-9727-8583
  • Soret, Albert|||0000-0002-1962-2972
  • Pérez García-Pando, Carlos|||0000-0002-4456-0697
  • Amato, Fulvio
  • Querol, Xavier
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
he NO2 annual air quality limit value is systematically exceeded in many European cities. In this context, understanding human exposure, improving policy and planning, and providing forecasts requires the development of accurate air quality models at the urban (street level) scale. We describe CALIOPE-Urban, a system coupling CALIOPE – an operational mesoscale air quality forecast system based on the HERMES (emissions), WRF (meteorology) and CMAQ (chemistry) models – with the urban roadway dispersion model R-LINE. Our developments have focused on Barcelona city (Spain), but the methodology may be replicated for other cities in the future. WRF drives pollutant dispersion and CMAQ provides background concentrations to R-LINE. Key features of our system include the adaptation of R-LINE to street canyons, the use of a new methodology that considers upwind grid cells in CMAQ to avoid double counting traffic emissions, a new method to estimate local surface roughness within street canyons, and a vertical mixing parameterisation that considers urban geometry and atmospheric stability to calculate surface level background concentrations. We show that the latter is critical to correct the night-time overestimations in our system. Both CALIOPE and CALIOPE-Urban are evaluated using two sets of observations. The temporal variability is evaluated against measurements from five traffic sites and one urban background site for April–May 2013. While both systems show a fairly good agreement at the urban background site, CALIOPE-Urban shows a better agreement at traffic sites. The spatial variability is evaluated using 182 passive dosimeters that were distributed across Barcelona during 2 weeks for February–March 2017. In this case, the coupled system also shows a more realistic distribution than the mesoscale system, which systematically underpredicts NO2 close to traffic emission sources. Overall CALIOPE-Urban improves mesoscale model results, demonstrating that the combination of both scales provides a more realistic representation of NO2 spatio-temporal variability in Barcelona., Jaime Benavides' PhD work is funded by grant BES-2014-070637 from the FPI programme by the Spanish Ministry of the Economy and Competitiveness. Jaime Benavides developed part of this work as a research visitor at the Institute for the Environment at UNC funded by mobility grant EEBB-I-17-12296 from the same ministry. IDAEA-CSIC acknowledges the Barcelona City Council for their support to the experimental campaign. Carlos Pérez García-Pando acknowledges the long-term support from the AXA Chair in Sand and Dust Storms (AXA Research Fund), as well as the support received through the Ramón y Cajal programme (grant RYC-2015-18690) of the Spanish Ministry of Economy and Competitiveness. This research has been supported by the Spanish Ministry of the Economy and Competitiveness (grant nos. CGL2013-46736-R, CGL2016-75725-R and RTI2018-099894-BI00), as well as the Catalan Government (grant no. RIS3CAT-COM15-1-0011-04)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

European primary emissions of criteria pollutants and greenhouse gases in 2020 modulated by the COVID-19 pandemic disruptions

  • Guevara Vilardell, Marc|||0000-0001-9727-8583
  • Petetin, Hervé
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
  • van der Gon, Hugo Denier
  • Kuenen, Jeroen
  • Super, Ingrid
  • Jalkanen, Jukka-Pekka
  • Majamäki, Elisa
  • Johansson, Lasse
  • Peuch, Vincent-Henri
  • Pérez García-Pando, Carlos|||0000-0002-4456-0697
We present a European dataset of daily sector-, pollutant- and country-dependent emission adjustment factors associated with the COVID-19 mobility restrictions for the year 2020. We considered metrics traditionally used to estimate emissions, such as energy statistics or traffic counts, as well as information derived from new mobility indicators and machine learning techniques. The resulting dataset covers a total of nine emission sectors, including road transport, the energy industry, the manufacturing industry, residential and commercial combustion, aviation, shipping, off-road transport, use of solvents, and fugitive emissions from transportation and distribution of fossil fuels. The dataset was produced to be combined with the Copernicus CAMS-REG_v5.1 2020 business-as-usual (BAU) inventory, which provides high-resolution () emission estimates for 2020 omitting the impact of the COVID-19 restrictions. The combination of both datasets allows quantifying spatially and temporally resolved reductions in primary emissions from both criteria pollutants (NOx, SO2, non-methane volatile organic compounds – NMVOCs, NH3, CO, PM10 and PM2.5) and greenhouse gases (CO2 fossil fuel, CO2 biofuel and CH4), as well as assessing the contribution of each emission sector and European country to the overall emission changes. Estimated overall emission changes in 2020 relative to BAU emissions were as follows: −10.5 % for NOx (−602 kt), −7.8 % (−260.2 Mt) for CO2 from fossil fuels, −4.7 % (−808.5 kt) for CO, −4.6 % (−80 kt) for SO2, −3.3 % (−19.1 Mt) for CO2 from biofuels, −3.0 % (−56.3 kt) for PM10, −2.5 % (−173.3 kt) for NMVOCs, −2.1 % (−24.3 kt) for PM2.5, −0.9 % (−156.1 kt) for CH4 and −0.2 % (−8.6 kt) for NH3. The most pronounced drop in emissions occurred in April (up to −32.8 % on average for NOx) when mobility restrictions were at their maxima. The emission reductions during the second epidemic wave between October and December were 3 to 4 times lower than those occurred during the spring lockdown, as mobility restrictions were generally softer (e.g. curfews, limited social gatherings). Italy, France, Spain, the United Kingdom and Germany were, together, the largest contributors to the total EU27 + UK (27 member states of the European Union and the UK) absolute emission decreases. At the sectoral level, the largest emission declines were found for aviation (−51 % to −56 %), followed by road transport (−15.5 % to −18.8 %), the latter being the main driver of the estimated reductions for the majority of pollutants. The collection of COVID-19 emission adjustment factors (https://doi.org/10.24380/k966-3957, Guevara et al., 2022) and the CAMS-REG_v5.1 2020 BAU gridded inventory (https://doi.org/10.24380/eptm-kn40, Kuenen et al., 2022b) have been produced in support of air quality modelling studies., This research has been supported by the H2020 European Research Council (FRAGMENT (grant no. 773051)); the Ministerio de Ciencia, Innovación y Universidades (grant no. RTI2018-099894-B-I00); the Agencia Estatal de Investigación (grant nos. PID2019-108086RA-I00, PID2020-116324RA695-I00); the AXA Research Fund (Professor on Sand and Dust Storms); the H2020 Marie Skłodowska-Curie Actions (grant no. H2020-MSCA-COFUND-2016-754433); the European Union’s Horizon 2020 research and innovation programme (SCIPPER (grant no. 814893)); the H2020 European Research Council (VERIFY (grant no. 776810)); and the Copernicus Atmosphere Monitoring Service (CAMS), which is implemented by the European Centre for Medium-Range Weather Forecasts (ECMWF) on behalf of the European Commission (grant nos. ECMWF/RFQ/2020/COP_079 and ECMWF/RFQ/2020/COP_066)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Optimized thread-block arrangement in a GPU implementation of a linear solver for atmospheric chemistry mechanisms

  • Guzmán Ruiz, Christian
  • Acosta Cobos, Mario César
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
  • Cesar Galobardes, Eduardo
  • Dawson, Matthew
  • Oyarzun Altamirano, Guillermo|||0000-0001-9524-3782
  • García Pando, Carlos Pérez
  • Serradell Maronda, Kim|||0000-0001-8230-4347
Earth system models (ESM) demand significant hardware resources and energy consumption to solve atmospheric chemistry processes. Recent studies have shown improved performance from running these models on GPU accelerators. Nonetheless, there is room for improvement in exploiting even more GPU resources. This study proposes an optimized distribution of the chemical solver's computational load on the GPU, named Block-cells. Additionally, we evaluate different configurations for distributing the computational load in an NVIDIA GPU. We use the linear solver from the Chemistry Across Multiple Phases (CAMP) framework as our test bed. An intermediate-complexity chemical mechanism under typical atmospheric conditions is used. Results demonstrate a 35× speedup compared to the single-CPU thread reference case. Even using the full resources of the node (40 physical cores) on the reference case, the Block-cells version outperforms them by 50%. The Block-cells approach shows promise in alleviating the computational burden of chemical solvers on GPU architectures., This work was partially supported by funding from the Ministerio de Ciencia, Innovación y Universidades as part of the BROWNING project (RTI2018-099894-BI00 funded by MCIN AEI/10.13039/ 501100011033) and part of the CAROL project (PID2020-113614RBC21 funded by MCIN AEI/10.13039/501100011033), the Generalitat de Catalunya (2021-SGR-00574, 2021-SGR-01550 and 2021- SGR00785) and the AXA Research Fund through the AXA Chair on Sand and Dust Storms established at the Barcelona Supercomputing Center (BSC). Matthew Dawson has received funding from the European Union’s Horizon 2020 research and innovation program under Marie Sklodowska Curie grant agreement no. 747048. Mario Acosta has received funding from the National Research Agency through OEMES (PID2020-116324RA-I00). This paper expresses the opinions of the authors and not necessarily those of the funding commissions., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Lessons from the COVID-19 air pollution decrease in Spain: Now what?

  • Querol, X.
  • Massagué, J.
  • Alastuey, A.
  • Moreno, T.
  • Gangoiti, G.
  • Mantilla, E.
  • Duéguez, J.J.
  • Escudero, M.
  • Monfort, E.
  • Pérez García-Pando, C.
  • Petetin, H.
  • Jorba, O.
  • Vázquez, V.
  • de la Rosa, J.
  • Campos, A.
  • Muñóz, M.
  • Monge, S.
  • Hervás, M.
  • Javato, R.
  • Cornide, M.J.
We offer an overview of the COVID-19 -driven air quality changes across 11 metropolises in Spain with the focus on lessons learned on how continuing abating pollution. Traffic flow decreased by up to 80% during the lockdown and remained relatively low during the full relaxation (June and July). After the lockdown a significant shift from public transport to private vehicles (+21% in Barcelona) persisted due to the pervasive fear that using public transport might increase the risk of SARS-CoV-2 infection, which need to be reverted as soon as possible. NO2 levels fell below 50% of the WHO annual air quality guidelines (WHOAQGs), but those of PM2.5 were reduced less than expected due to the lower contributions from traffic, increased contributions from agricultural and domestic biomass burning, or meteorological conditions favoring high secondary aerosol formation yields. Even during the lockdown, the annual PM2.5 WHOAQG was exceeded in cities within the NE and E regions with high NH3 emissions from farming and agriculture. Decreases in PM10 levels were greater than in PM2.5 due to reduced emissions from road dust, vehicle wear, and construction/demolition. Averaged O3 daily maximum 8-h (8hDM) experienced a generalized decrease in the rural receptor sites in the relaxation (June–July) with -20% reduced mobility. For urban areas O3 8hDM responses were heterogeneous, with increases or decreases depending on the period and location. Thus, after canceling out the effect of meteorology, 5 out of 11 cities experienced O3 decreases during the lockdown, while the remaining 6 either did not experience relevant reductions or increased. During the relaxation period and coinciding with the growing O3 season (June–July), most cities experienced decreases. However, the O3 WHOAQG was still exceeded during the lockdown and full relaxation periods in several cities. For secondary pollutants, such as O3 and PM2.5, further chemical and dispersion modeling along with source apportionment techniques to identify major precursor reduction targets are required to evaluate their abatement potential.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

HERMESv3, a stand-alone multi-scale atmospheric emission modelling framework-Part 2: The bottom-up module

  • Guevara, M.
  • Tena, C.
  • Porquet, M.
  • Jorba, O.
  • Pérez García-Pando, C.
We describe the bottom-up module of the High-Elective Resolution Modelling Emission System version 3 (HERMESv3), a Python-based and multi-scale modelling tool intended for the processing and computation of atmospheric emissions for air quality modelling. HERMESv3 is composed of two separate modules: the global-regional module and the bottom-up module. In a companion paper (Part 1, Guevara et al., 2019a) we presented the global-regional module. The bottom-up module described in this contribution is an emission model that estimates anthropogenic emissions at high spatial-(e.g. road link level, ) and temporal-(hourly) resolution using state-of-the-art calculation methods that combine local activity and emission factors along with meteorological data. The model computes bottom-up emissions from point sources, road transport, residential and commercial combustion, other mobile sources, and agricultural activities. The computed pollutants include the main criteria pollutants (i.e. NOx , CO, NMVOCs (nonmethane volatile organic compounds), SOx , NH3, PM10 and PM2:5) and greenhouse gases (i.e. CO2 and CH4, only related to combustion processes). Specific emission estimation methodologies are provided for each source and are mostly based on (but not limited to) the calculation methodologies reported by the European EMEP/EEA air pollutant emission inventory guidebook. Meteorologically dependent functions are also included to take into account the dynamical component of the emission processes. The model also provides several functionalities for automatically manipulating and performing spatial operations on georeferenced objects (shapefiles and raster files). The model is designed so that it can be applicable to any European country or region where the required input data are available. As in the case of the global-regional module, emissions can be estimated on several user-defined grids, mapped to multiple chemical mechanisms and adapted to the input requirements of different atmospheric chemistry models (CMAQ, WRF-Chem and MONARCH) as well as a street-level dispersion model (RLINE). Specific emission outputs generated by the model are presented and discussed to illustrate its capabilities.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Uncertainties in source allocation of carbonaceous aerosols in a Mediterranean region

  • Navarro Barboza, Héctor
  • Pandolfi, Marco
  • Guevara Vilardell, Marc
  • Enciso Morales, Santiago Adolfo
  • Tena Medina, Carles
  • Via González, Marta
  • Yús-Díez, Jesús
  • Reche Andúgar, Cristina
  • Perez Lozano, Noemi
  • Alastuey Urós, Andrés
  • Querol Carceller, Xavier
  • Jorba Casellas, Oriol
Understanding the atmospheric processes involving carbonaceous aerosols (CAs) is crucial for assessing air pollution impacts on human health and climate. The sources and formation mechanisms of CAs are not well understood, making it challenging to quantify impacts in models. Studies suggest residential wood combustion (RWC) and traffic significantly contribute to CAs in Europe’s urban and rural areas. Here, we used an atmospheric chemistry model (MONARCH) and three different emission inventories (two versions of the European-scale emission inventory CAMS-REG_v4 and the HERMESv3 detailed national inventory for Spain) to assess the uncertainties in CAs simulation and source allocation (from traffic, RWC, shipping, fires and others) in Northeast Spain. For this, black carbon (BC) and organic aerosol (OA) measurements performed at three supersites representing different environments (urban, regional and remote) were used. Our findings show the importance of model resolution and detailed emission input data in accurately reproducing BC/OA observations. Even though emissions of total particulate matter are rather consistent between inventories in Spain, we found discrepancies between them mainly related to the spatiotemporal disaggregation (particularly relevant for traffic and RWC) and the treatment of the condensable fraction of CAs in RWC (changes in the speciation of elemental/organic carbon). The main source contribution to BC concentrations in the urban site is traffic, accounting for (January/July) in close agreement with the fossil contribution derived from observations (), followed by RWC () and shipping emissions ( ). An over-representation of RWC (winter) and shipping (summer) is obtained with CAMS-REG_v4. Noteworthy uncertainties arise in OA results due to condensables in emissions and a limited secondary aerosol production in the model. These findings offer insights into MONARCH’s effectiveness in simulating CAs concentrations and source contribution in Northeast Spain. The study highlights the benefits of combining new datasets and modeling techniques to refine emission inventories and better understand and mitigate air pollution impacts., Hector Navarro-Barboza acknowledges financial support from the Spanish Ministry for Science and Innovation (FPI PRE2018-084988 financed by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future). The research leading to these results has received funding from the Ministerio de Ciencia, Innovación y Universidades as H. Navarro-Barboza et al. Environment International 183 (2024) 108252 18 part of the BROWNING project (Grant No. RTI2018-099894-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by ”ERDF A way of making Europe”) and the Ministerio de Asuntos Económicos y Transformaciön Digital, Gobierno de España as part of the CAIAC project (Grant No. PID2019-108990 PB-100). This project has received funding from the Agencia Estatal Consejo Superior de Investigaciones Científicas (CSIC) under the Project 202030E261, and the Generalitat de Catalunya, by AGAUR (2021 SGR 00447) and the Direcció General de Qualitat Ambiental i Canvi Climàtic (DGQACC). This project has also received funding from the European Union’s Horizon Europe research and innovation programme under the RI-URBANs project (grant agreement No 101036245). IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Grant No. CEX2018- 000794-S). BSC researchers thankfully acknowledge the computer resources at Marenostrum and the technical support provided by Barcelona Supercomputing Center (RES-AECT-2021–1-0027, RES-AECT-2021–2-0001), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Meteorology-normalized impact of the COVID-19 lockdown upon NO2 pollution in Spain

  • Petetin, Hervé
  • Bowdalo, Dene
  • Soret, Albert
  • Guevara Vilardell, Marc
  • Jorba Casellas, Oriol
  • Serradell Maronda, Kim
  • Pérez García-Pando, Carlos
The spread of the new coronavirus SARS-CoV-2 that causes COVID-19 forced the Spanish Government to implement extensive lockdown measures to reduce the number of hospital admissions, starting on 14 March 2020. Over the following days and weeks, strong reductions in nitrogen dioxide (NO2) pollution were reported in many regions of Spain. A substantial part of these reductions was obviously due to decreased local and regional anthropogenic emissions. Yet, the confounding effect of meteorological variability hinders a reliable quantification of the lockdown's impact upon the observed pollution levels. Our study uses machine-learning (ML) models fed by meteorological data along with other time features to estimate the “business-as-usual” NO2 mixing ratios that would have been observed in the absence of the lockdown. We then quantify the so-called meteorology-normalized NO2 reductions induced by the lockdown measures by comparing the estimated business-as-usual values with the observed NO2 mixing ratios. We applied this analysis for a selection of urban background and traffic stations covering the more than 50 Spanish provinces and islands. The ML predictive models were found to perform remarkably well in most locations, with an overall bias, root mean square error and correlation of +4 %, 29 % and 0.86, respectively. During the period of study, from the enforcement of the state of alarm in Spain on 14 March to 23 April, we found the lockdown measures to be responsible for a 50 % reduction in NO2 levels on average over all provinces and islands. The lockdown in Spain has gone through several phases with different levels of severity with respect to mobility restrictions. As expected, the meteorology-normalized change in NO2 was found to be stronger during phase II (the most stringent phase) and phase III of the lockdown than during phase I. In the largest agglomerations, where both urban background and traffic stations were available, a stronger meteorology-normalized NO2 change is highlighted at traffic stations compared with urban background sites. Our results are consistent with foreseen (although still uncertain) changes in anthropogenic emissions induced by the lockdown. We also show the importance of taking the meteorological variability into account for accurately assessing the impact of the lockdown on NO2 levels, in particular at fine spatial and temporal scales. Meteorology-normalized estimates such as those presented here are crucial to reliably quantify the health implications of the lockdown due to reduced air pollution., This project has received funding from the European Union's Horizon 2020 (H2020) research and innovation program under the Marie Skłodowska-Curie Actions (grant no. H2020-MSCA-COFUND-2016-754433) and the H2020 ACTRIS IMP project (grant no. 871115). We also acknowledge support from the European Research Council (grant no. 773051; FRAGMENT); the AXA Research Fund; the Spanish Ministry of Science, Innovation and Universities (grant nos. RYC-2015-18690, CGL2017-88911-R, RTI2018-099894-B-I00 and Red Temática ACTRIS España CGL2017-90884-REDT); and the BSC-CNS “Centro de Excelencia Severo Ochoa 2015-2019” program (grant no. SEV-2015-0493). The authors are grateful to PRACE for awarding us access to MareNostrum Supercomputer in the Barcelona Supercomputing Center., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A global catalogue of CO2 emissions and co-emitted species from power plants, including high-resolution vertical and temporal profiles

  • Guevara Vilardell, Marc
  • Enciso Morales, Santiago Adolfo
  • Tena Medina, Carles
  • Jorba Casellas, Oriol
  • Dellaert, Stijn
  • Denier Van der Gon, Hugo
  • García Pando, Carlos Pérez
We present a high-resolution global emission catalogue of CO2 and co-emitted species (NOx, SO2, CO, CH4) from thermal power plants for the year 2018. The construction of the database follows a bottom-up approach, which combines plant-specific information with national energy consumption statistics and fuel-dependent emission factors for CO2 and emission ratios for co-emitted species (e.g. the amount of NOx emitted relative to CO2: NOx/CO2 ). The resulting catalogue contains annual emission information for more than 16 000 individual facilities at their exact geographical locations. Each facility is linked to a country- and fuel-dependent temporal profile (i.e. monthly, day of the week and hourly) and a plant-level vertical profile, which were derived from national electricity generation statistics and plume rise calculations that combine stack parameters with meteorological information. The combination of the aforementioned information allows us to derive high-resolution spatial and temporal emissions for modelling purposes. Estimated annual emissions were compared against independent plant- and country-level inventories, including Carbon Monitoring for Action (CARMA), the Global Infrastructure emission Database (GID) and the Emissions Database for Global Atmospheric Research (EDGAR), as well as officially reported emission data. Overall good agreement is observed between datasets when comparing the CO2 emissions. The main discrepancies are related to the non-inclusion of auto-producer or heat-only facilities in certain countries due to a lack of data. Larger inconsistencies are obtained when comparing emissions from co-emitted species due to uncertainties in the fuel-, country- and region-dependent emission ratios and gap-filling procedures. The temporal distribution of emissions obtained in this work was compared against traditional sector-dependent profiles that are widely used in modelling efforts. This highlighted important differences and the need to consider country dependencies when temporally distributing emissions. The resulting catalogue (https://doi.org/10.24380/0a9o-v7xe, Guevara et al., 2023) is developed in the framework of the Prototype System for a Copernicus CO2 service (CoCO2) European Union (EU)-funded project to support the development of the Copernicus CO2 Monitoring and Verification Support capacity (CO2MVS)., This research has been supported by the Horizon 2020 research and innovation programme (grant no. 958927), the European Centre for Medium-Range Weather Forecasts (grant no. CAMS2_61), the Agencia Estatal de Investigación (grant no. PID2019-108086RA-I00), the Ministerio de Ciencia, Innovación y Universidades (grant no. RTI2018099894-BI00), the AXA Research Fund (AXA Chair on Sand and Dust Storms) and the European Research Council (grant no. 773051)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

HERMESv3, a stand-alone multi-scale atmospheric emission modelling framework – part 2: the bottom–up module

  • Guevara Vilardell, Marc
  • Tena, Carles
  • Porquet, Manuel
  • Jorba Casellas, Oriol
  • Pérez García-Pando, Carlos
We describe the bottom–up module of the High-Elective Resolution Modelling Emission System version 3 (HERMESv3), a Python-based and multi-scale modelling tool intended for the processing and computation of atmospheric emissions for air quality modelling. HERMESv3 is composed of two separate modules: the global_regional module and the bottom_up module. In a companion paper (Part 1, Guevara et al., 2019a) we presented the global_regional module. The bottom_up module described in this contribution is an emission model that estimates anthropogenic emissions at high spatial- (e.g. road link level,) and temporal- (hourly) resolution using state-of-the-art calculation methods that combine local activity and emission factors along with meteorological data. The model computes bottom–up emissions from point sources, road transport, residential and commercial combustion, other mobile sources, and agricultural activities. The computed pollutants include the main criteria pollutants (i.e. NOx, CO, NMVOCs (non-methane volatile organic compounds), SOx, NH3, PM10 and PM2.5) and greenhouse gases (i.e. CO2 and CH4, only related to combustion processes). Specific emission estimation methodologies are provided for each source and are mostly based on (but not limited to) the calculation methodologies reported by the European EMEP/EEA air pollutant emission inventory guidebook. Meteorologically dependent functions are also included to take into account the dynamical component of the emission processes. The model also provides several functionalities for automatically manipulating and performing spatial operations on georeferenced objects (shapefiles and raster files). The model is designed so that it can be applicable to any European country or region where the required input data are available. As in the case of the global_regional module, emissions can be estimated on several user-defined grids, mapped to multiple chemical mechanisms and adapted to the input requirements of different atmospheric chemistry models (CMAQ, WRF-Chem and MONARCH) as well as a street-level dispersion model (R-LINE). Specific emission outputs generated by the model are presented and discussed to illustrate its capabilities., This research has been supported by the Ministerio de Ciencia, Innovación y Universidades (grant no. CGL2016-75725-R), the Ministerio de Ciencia, Innovación y Universidades (grant no. RTI2018-099894-B-I00), the Ministerio de Ciencia, Innovación y Universidades (grant no. RYC-2015-18690), and the AXA Research Fund (grant no. AXA Research Fund)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

CALIOPE-Urban v1.0: coupling R-LINE with a mesoscale air quality modelling system for urban air quality forecasts over Barcelona city (Spain)

  • Benavides, Jaime
  • Snyder, Michelle
  • Guevara Vilardell, Marc
  • Soret, Albert
  • Pérez García-Pando, Carlos
  • Amato, Fulvio
  • Querol, Xavier
  • Jorba Casellas, Oriol
he NO2 annual air quality limit value is systematically exceeded in many European cities. In this context, understanding human exposure, improving policy and planning, and providing forecasts requires the development of accurate air quality models at the urban (street level) scale. We describe CALIOPE-Urban, a system coupling CALIOPE – an operational mesoscale air quality forecast system based on the HERMES (emissions), WRF (meteorology) and CMAQ (chemistry) models – with the urban roadway dispersion model R-LINE. Our developments have focused on Barcelona city (Spain), but the methodology may be replicated for other cities in the future. WRF drives pollutant dispersion and CMAQ provides background concentrations to R-LINE. Key features of our system include the adaptation of R-LINE to street canyons, the use of a new methodology that considers upwind grid cells in CMAQ to avoid double counting traffic emissions, a new method to estimate local surface roughness within street canyons, and a vertical mixing parameterisation that considers urban geometry and atmospheric stability to calculate surface level background concentrations. We show that the latter is critical to correct the night-time overestimations in our system. Both CALIOPE and CALIOPE-Urban are evaluated using two sets of observations. The temporal variability is evaluated against measurements from five traffic sites and one urban background site for April–May 2013. While both systems show a fairly good agreement at the urban background site, CALIOPE-Urban shows a better agreement at traffic sites. The spatial variability is evaluated using 182 passive dosimeters that were distributed across Barcelona during 2 weeks for February–March 2017. In this case, the coupled system also shows a more realistic distribution than the mesoscale system, which systematically underpredicts NO2 close to traffic emission sources. Overall CALIOPE-Urban improves mesoscale model results, demonstrating that the combination of both scales provides a more realistic representation of NO2 spatio-temporal variability in Barcelona., Jaime Benavides' PhD work is funded by grant BES-2014-070637 from the FPI programme by the Spanish Ministry of the Economy and Competitiveness. Jaime Benavides developed part of this work as a research visitor at the Institute for the Environment at UNC funded by mobility grant EEBB-I-17-12296 from the same ministry. IDAEA-CSIC acknowledges the Barcelona City Council for their support to the experimental campaign. Carlos Pérez García-Pando acknowledges the long-term support from the AXA Chair in Sand and Dust Storms (AXA Research Fund), as well as the support received through the Ramón y Cajal programme (grant RYC-2015-18690) of the Spanish Ministry of Economy and Competitiveness. This research has been supported by the Spanish Ministry of the Economy and Competitiveness (grant nos. CGL2013-46736-R, CGL2016-75725-R and RTI2018-099894-BI00), as well as the Catalan Government (grant no. RIS3CAT-COM15-1-0011-04)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Data fusion uncertainty-enabled methods to map street-scale hourly NO2 in Barcelona: a case study with CALIOPE-Urban v1.0

  • Criado, Alvaro
  • Mateu Armengol, Jan
  • Petetin, Hervé
  • Rodriguez Rey, Daniel
  • Benavides, Jaime
  • Guevara Vilardell, Marc
  • Pérez García-Pando, Carlos
  • Soret, Albert
  • Jorba, Oriol
Comprehensive monitoring of NO2 exceedances is imperative for protecting human health, especially in urban areas with traffic. However, an accurate spatial characterization of the exceedances is challenging due to the typically low density of air quality monitoring stations and the inherent uncertainties in urban air quality models. We study how observational data from different sources and timescales can be combined with a dispersion air quality model to obtain bias-corrected NO2 hourly maps at the street scale. We present a kriging-based data fusion workflow that merges dispersion model output with continuous hourly observations and uses a machine-learning-based land use regression (LUR) model constrained with past short intensive passive dosimeter campaign measurements. While the hourly observations allow the bias adjustment of the temporal variability in the dispersion model, the microscale LUR model adds information on the NO2 spatial patterns. Our method includes an uncertainty calculation based on the estimated error variance of the universal kriging technique, which is subsequently used to produce urban maps of probability of exceeding the 200 µg m−3 hourly and the 40 µg m−3 annual NO2 average limits. We assess the statistical performance of this approach in the city of Barcelona for the year 2019. Our results show that simply merging the monitoring stations with the model output already significantly increases the correlation coefficient (r) by +29 % and decreases the root mean square error (RMSE) by −32 %. When adding the time-invariant microscale LUR model in the data fusion workflow, the improvement is even more remarkable, with +46 % and −48 % for the r and RMSE, respectively. Our work highlights the usefulness of high-resolution spatial information in data fusion methods to better estimate exceedances at the street scale., We have received support from the Barcelona City Council through the UncertAIR project (ID 22S09501-001; Recerca Jove i emergent 2022). This research has been supported by the Ministerio de Ciencia e Innovación through the BROWNING project (grant no. RTI2018-099894-BI00), the Agencia Estatal de Investigación as part of the VITALISE project (grant no. PID2019-108086RA-I00) and the MITIGATE project (grant no. PID2020-116324RA695 I00), the H2020 Marie Skłodowska-Curie Actions (grant no. H2020-MSCA-COFUND-2016-754433), the AXA Research Fund, and the Barcelona Supercomputing Center (grant nos. RES-AECT-2021-1-0027 and RES-AECT-2021-2-0001)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

European primary emissions of criteria pollutants and greenhouse gases in 2020 modulated by the COVID-19 pandemic disruptions

  • Guevara Vilardell, Marc
  • Petetin, Hervé
  • Jorba Casellas, Oriol
  • van der Gon, Hugo Denier
  • Kuenen, Jeroen
  • Super, Ingrid
  • Jalkanen, Jukka-Pekka
  • Majamäki, Elisa
  • Johansson, Lasse
  • Peuch, Vincent-Henri
  • Pérez García-Pando, Carlos
We present a European dataset of daily sector-, pollutant- and country-dependent emission adjustment factors associated with the COVID-19 mobility restrictions for the year 2020. We considered metrics traditionally used to estimate emissions, such as energy statistics or traffic counts, as well as information derived from new mobility indicators and machine learning techniques. The resulting dataset covers a total of nine emission sectors, including road transport, the energy industry, the manufacturing industry, residential and commercial combustion, aviation, shipping, off-road transport, use of solvents, and fugitive emissions from transportation and distribution of fossil fuels. The dataset was produced to be combined with the Copernicus CAMS-REG_v5.1 2020 business-as-usual (BAU) inventory, which provides high-resolution () emission estimates for 2020 omitting the impact of the COVID-19 restrictions. The combination of both datasets allows quantifying spatially and temporally resolved reductions in primary emissions from both criteria pollutants (NOx, SO2, non-methane volatile organic compounds – NMVOCs, NH3, CO, PM10 and PM2.5) and greenhouse gases (CO2 fossil fuel, CO2 biofuel and CH4), as well as assessing the contribution of each emission sector and European country to the overall emission changes. Estimated overall emission changes in 2020 relative to BAU emissions were as follows: −10.5 % for NOx (−602 kt), −7.8 % (−260.2 Mt) for CO2 from fossil fuels, −4.7 % (−808.5 kt) for CO, −4.6 % (−80 kt) for SO2, −3.3 % (−19.1 Mt) for CO2 from biofuels, −3.0 % (−56.3 kt) for PM10, −2.5 % (−173.3 kt) for NMVOCs, −2.1 % (−24.3 kt) for PM2.5, −0.9 % (−156.1 kt) for CH4 and −0.2 % (−8.6 kt) for NH3. The most pronounced drop in emissions occurred in April (up to −32.8 % on average for NOx) when mobility restrictions were at their maxima. The emission reductions during the second epidemic wave between October and December were 3 to 4 times lower than those occurred during the spring lockdown, as mobility restrictions were generally softer (e.g. curfews, limited social gatherings). Italy, France, Spain, the United Kingdom and Germany were, together, the largest contributors to the total EU27 + UK (27 member states of the European Union and the UK) absolute emission decreases. At the sectoral level, the largest emission declines were found for aviation (−51 % to −56 %), followed by road transport (−15.5 % to −18.8 %), the latter being the main driver of the estimated reductions for the majority of pollutants. The collection of COVID-19 emission adjustment factors (https://doi.org/10.24380/k966-3957, Guevara et al., 2022) and the CAMS-REG_v5.1 2020 BAU gridded inventory (https://doi.org/10.24380/eptm-kn40, Kuenen et al., 2022b) have been produced in support of air quality modelling studies., This research has been supported by the H2020 European Research Council (FRAGMENT (grant no. 773051)); the Ministerio de Ciencia, Innovación y Universidades (grant no. RTI2018-099894-B-I00); the Agencia Estatal de Investigación (grant nos. PID2019-108086RA-I00, PID2020-116324RA695-I00); the AXA Research Fund (Professor on Sand and Dust Storms); the H2020 Marie Skłodowska-Curie Actions (grant no. H2020-MSCA-COFUND-2016-754433); the European Union’s Horizon 2020 research and innovation programme (SCIPPER (grant no. 814893)); the H2020 European Research Council (VERIFY (grant no. 776810)); and the Copernicus Atmosphere Monitoring Service (CAMS), which is implemented by the European Centre for Medium-Range Weather Forecasts (ECMWF) on behalf of the European Commission (grant nos. ECMWF/RFQ/2020/COP_079 and ECMWF/RFQ/2020/COP_066)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A new NMVOC speciated inventory for a reactivity-based approach to support ozone control strategies in Spain

  • Oliveira, Kevin de
  • Guevara Vilardell, Marc
  • Jorba Casellas, Oriol
  • Querol Carceller, Xavier
  • Pérez García-Pando, Carlos
Ozone (O3) pollution is a persistent problem in many regions of Spain, so understanding O3 precursor emissions and trends is essential to design effective control strategies. We estimated the impact of Non-Methane Volatile Organic Compounds (NMVOC) species upon O3 formation potential (OFP) using the maximum incremental reactivity approach. For this, we developed a speciated NMVOC emission inventory for Spain from 2010 to 2019 combining national reported emissions with state-of-the-art speciation profiles, which resulted in a database of emissions for over 900 individual NMVOC species and 153 individual sectors. Additionally, we analysed 2030 emission projections to quantify the expected impact of planned measures on future OFP levels. Overall, the main activities contributing to OFP in Spain are paint manufacturing and applications (20 %), manure management (16 %), and domestic solvent use (6 %). These activities contribute unevenly across regions. The more urbanised areas report a larger contribution from the solvent sector (64 % in Madrid), while in rural areas, manure management and agricultural waste burning gain importance (24 % in Extremadura), indicating that local control measures should be implemented. The top 10 NMVOC species contributing to OFP are ethanol, ethene, xylenes, propene, toluene, formaldehyde, 1,3-butadiene, styrene, n-butane, and cyclopentane, which together are responsible for 54 % of the total OFP. Our trend analysis indicates a reduction of NMVOC emissions and OFP of -5 % and -10 % between 2010 and 2019, respectively. The larger decrease in OFP is driven by a bigger reduction in xylenes (-29 %) and toluene (-28 %) from paint application industries and the road transport sector. By 2030 a significant increase (+37 %) in the OFP from the public electricity sector is expected due to the planned increase in biomass use for power generation. Our results indicate that policies should focus on paint reformulation, limiting aerosol products, and implementing NMVOC control devices in future biomass power plants., The research leading to these results has received funding from the Ministerio para la Transición Ecológica y el Reto Demográfico (MITECO) as part of the Plan Nacional del Ozono project (BOE-A-2021-20183); from the Ministerio de Ciencia, Innovación y Universidades (MICINN) as part of the BROWNING project RTI2018-099894-B-I00; from the VITALISE project (PID2019-108086RA-I00) funded by MCIN/AEI/10.13039/ 501100011033; from the AXA Research Fund; and from the European Research Council (grant no. 773051, FRAGMENT). K. Oliveira acknowledges the support received by the grant PRE2020 − 092616 funded by MCIN/ AEI/10.13039/501100011033 and ESF Investing in your future., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the uncertainty of anthropogenic aromatic volatile organic compound emissions: model evaluation and sensitivity analysis

  • Oliveira, Kevin de
  • Guevara Vilardell, Marc
  • Jorba Casellas, Oriol
  • Petetin, Hervé
  • Bowdalo, Dene
  • Tena Medina, Carles
  • Montané Pinto, Gilbert
  • Lopez, Franco
  • Pérez García-Pando, Carlos
Volatile organic compounds (VOCs) significantly impact air quality and atmospheric chemistry, influencing ozone formation and secondary organic aerosol production. Despite their importance, the uncertainties associated with representing VOCs in atmospheric emission inventories are considerable. This work presents a spatiotemporal assessment and evaluation of benzene, toluene, and xylene (BTX) emissions and concentrations in Spain by combining bottom-up emissions, air quality modelling techniques, and ground-based observations. The emissions produced by High-Elective Resolution Modelling Emission System (HERMESv3) were used as input to the Multiscale Online Nonhydrostatic AtmospheRe CHemistry (MONARCH) chemical transport model to simulate surface concentrations across Spain. Comparing modelled and observed levels revealed uncertainty in the anthropogenic emissions, which were further explored through sensitivity tests. The largest levels of observed benzene and xylene were found in industrial sites near coke ovens, refineries, and car manufacturing facilities, where the modelling results show large underestimations. Official emissions reported for these facilities were replaced by alternative estimates, resulting in varied improvements in the model's performance across different stations. However, uncertainties associated with industrial emission processes persist, emphasising the need for further refinement. For toluene, consistent overestimations in background stations were mainly related to uncertainties in the spatial disaggregation of emissions from industrial-use solvent activities, mainly wood paint applications. Observed benzene levels in Barcelona's urban traffic areas were 5 times larger than the ones observed in Madrid. MONARCH failed to reproduce the observed gradient between the two cities due to uncertainties arising from estimating emissions from motorcycles and mopeds, as well as from different measurement methods and the model's capacity to accurately simulate meteorological conditions. Our results are constrained by the spatial and temporal coverage of available BTX observations, posing a key challenge in evaluating the spatial distribution of modelled levels and associated emissions., This research has been supported by the Ministerio para la Transición Ecológica y el Reto Demográfico (grant nos. BOE-A-2021-20183 and BOE-A-2023-24403), the Ministerio de Ciencia e Innovación (grant nos. RTI2018-099894- B-I00, PID2019-108086RA-I00, CGL2017-90884-REDT, and MCIN/AEI/10.13039/501100011033), the European Research Council H2020 (grant no. 773051), the Ramon y Cajal grant MCIN/AEI/10.13039/501100011033 (grant no. RYC2021- 034511-I), the European Union NextGenerationEU/PRTR, the AXA Research Fund (grant no. AXA Research Fund), MCIN/AEI/10.13039/501100011033 and ESF “Investing in your Future” (grant no. PRE2020-092616), and the RES (grant nos. AECT-2022-2-0003 and AECT-2023-3-0018)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimized thread-block arrangement in a GPU implementation of a linear solver for atmospheric chemistry mechanisms

  • Guzmán Ruiz, Christian
  • Acosta Cobos, Mario César
  • Jorba Casellas, Oriol
  • Cesar Galobardes, Eduardo
  • Dawson, Matthew
  • Oyarzun Altamirano, Guillermo
  • García Pando, Carlos Pérez
  • Serradell Maronda, Kim
Earth system models (ESM) demand significant hardware resources and energy consumption to solve atmospheric chemistry processes. Recent studies have shown improved performance from running these models on GPU accelerators. Nonetheless, there is room for improvement in exploiting even more GPU resources. This study proposes an optimized distribution of the chemical solver's computational load on the GPU, named Block-cells. Additionally, we evaluate different configurations for distributing the computational load in an NVIDIA GPU. We use the linear solver from the Chemistry Across Multiple Phases (CAMP) framework as our test bed. An intermediate-complexity chemical mechanism under typical atmospheric conditions is used. Results demonstrate a 35× speedup compared to the single-CPU thread reference case. Even using the full resources of the node (40 physical cores) on the reference case, the Block-cells version outperforms them by 50%. The Block-cells approach shows promise in alleviating the computational burden of chemical solvers on GPU architectures., This work was partially supported by funding from the Ministerio de Ciencia, Innovación y Universidades as part of the BROWNING project (RTI2018-099894-BI00 funded by MCIN AEI/10.13039/ 501100011033) and part of the CAROL project (PID2020-113614RBC21 funded by MCIN AEI/10.13039/501100011033), the Generalitat de Catalunya (2021-SGR-00574, 2021-SGR-01550 and 2021- SGR00785) and the AXA Research Fund through the AXA Chair on Sand and Dust Storms established at the Barcelona Supercomputing Center (BSC). Matthew Dawson has received funding from the European Union’s Horizon 2020 research and innovation program under Marie Sklodowska Curie grant agreement no. 747048. Mario Acosta has received funding from the National Research Agency through OEMES (PID2020-116324RA-I00). This paper expresses the opinions of the authors and not necessarily those of the funding commissions., Peer Reviewed, Postprint (author's final draft)