Pasar al contenido principal

CARGADORES DE BATERIAS BIDIRECCIONALES PARA LA INTEGRACION EN MICRORREDES DE VEHICULOS ELECTRICOS Y ESTACIONES DE CARGA ULTRARRAPIDA CON BATERIAS DE RESPALDO

RTI2018-100732-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Control Stage for Parallel-Connected Interlinking Converters in Hybrid AC-DC Microgrids

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Torán, Enric|||0000-0002-0868-9856
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
[EN] Having two or more interlinking converters connected in parallel in hybrid microgrids has some benefits, like modularity, flexibility, and redundancy. However, the parallelization of the inverters leads to circulating currents that can cause system malfunctions. This work uses a method for suppressing low-frequency circulating currents in interlinking converters by controlling the zero-sequence component of the phase currents, showing that the control structure is valid for interlinking converters. The proposed control scheme has been applied to two parallel interlinking inverters of 5 kW and 2.5 kW, respectively. The interlinking inverters are connected to the grid, and they control the voltage in the DC bus of the hybrid microgrid. To validate the concept, simulation and experimental results are shown., This work was supported by the Spanish "Ministerio de Ciencia e Innovacion" and the European Regional Development Fund (ERDF) under Grant RTI2018-100732-B-C21 and Grant PID2021-122835OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Coordination of different agents in a microgrid using DC-Bus Signaling

  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Liberos, Marian|||0000-0001-6574-1158
  • Torán, Enric|||0000-0002-0868-9856
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
  • Garcerá, Gabriel|||0000-0002-5507-4379
[EN] The DC-Bus Signaling (DBS) is a proven method to coordinate different agents in a microgrid, using the DCvoltage of the microgrid as a communication signal. The droop control applied in a dc-microgrid leads to an error in the voltage regulation of the microgrid, while the power sharing among converters in such microgrid is achieved. By using the voltage at each node of the grid as the DBS signal, the behavior of the different agents in a microgrid can be managed. In this paper the DBS technique is used to coordinate conventional generators, Energy Storage Systems and loads in a microgrid. The control laws proposed are tested in an experimental microgrid., This research was funded by the Spanish Ministerio de Asuntos Económicos y Transformación Digital and the European Regional Development Fund (ERDF) under Grants RTI2018-100732-B-C21 and PID2021-122835OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving the energy efficiency of slightly inductive three-phase three-wire linear systems through single-phase capacitors banks

  • Blasco Espinosa, Pedro Angel|||0000-0002-0986-9154
  • Montoya-Mira, Rafael
  • Diez-Aznar, José-Manuel|||0000-0002-9414-3517
  • Montoya Villena, Rafael|||0000-0003-1400-4064
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
[EN] Recent low-voltage, three-phase distribution networks carry inefficient power, which can be attributed to the reactive power, imbalance of linear loads, and increase in non-linear loads. Researchers have mainly focused on developing active filters to improve the quality of electrical energy. However, in most cases, compensating for the reactive power is sufficient, considering cost and quality. Active filters are expensive, thus, passive compensators are more appealing. These devices are composed of single-phase or three-phase capacitor banks that act on the reactive power consumed by the load. The operation of these devices has been sufficiently validated owing to their long-term use. For unbalanced power, compensators that contain coils are used. A methodology to obtain compensators comprising only single-phase capacitors for the inductive reactive power consumed by the load is presented here; if designed appropriately, these compensators can compensate for a part of or the entire unbalanced power, resulting in greater efficiency in the transfer of electrical energy., Spanish Ministry of Science, Innovation, and Universities (MICINN); European Regional Development Fund (ERDF), Grant/AwardNumber: RTI2018100732-B-C21
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unbalanced and Reactive Currents Compensation in Three-Phase Four-Wire Sinusoidal Power Systems

  • Montoya-Mira, Rafael
  • Blasco Espinosa, Pedro Angel|||0000-0002-0986-9154
  • Diez-Aznar, José-Manuel|||0000-0002-9414-3517
  • Montoya Villena, Rafael|||0000-0003-1400-4064
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
[EN] In an unbalanced linear three-phase electrical system, there are inefficient powers that increase the apparent power supplied by the network, line losses, machine malfunctions, etc. These inefficiencies are mainly due to the use of unbalanced loads. Unlike a three-wire unbalanced system, a four-wire system has zero sequence currents that circulate through the neutral wire and can be compensated by means of compensation equipment, which prevents it from being delivered by the network. To design a compensator that works with unbalanced voltages, it is necessary to consider the interactions between it and the other compensators used to compensate for negative-sequence currents and positive-sequence reactive currents. In this paper, through passive compensation, a new method is proposed to develop the zero sequence current compensation equipment. The method does not require iteration algorithms and is valid for unbalanced voltages. In addition, the interactions between all compensators are analyzed, and the necessary modifications in the calculations are proposed to obtain a total compensation. To facilitate the application of the method and demonstrate its validity, a case study is developed from a three-phase linear four-wire system with unbalanced voltages and loads. The results obtained are compared with other compensation methods that also use passive elements., This work is supported by the Spanish Ministry of Science, Innovation and Universities (MICINN) and the European Regional Development Fund (ERDF) under grant RTI2018-100732-B-C21.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Control Scheme to Suppress Circulating Currents in Parallel-Connected Three-Phase Inverters

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
[EN] The parallel operation of inverters has many benefits, such as modularity and redundancy. However, the parallel connection of inverters produces circulating currents that may result in malfunctions of the system. In this work, a control technique for the elimination of the low-frequency components of the circulating currents in grid-connected inverters is presented. The proposed control structure contains n - 1 zero-sequence control loops, with n being the number of inverters connected in parallel. Simulation and experimental results have been carried out on a prototype composed of two 5 kW inverters connected in parallel. The results have been obtained by considering the following mismatches between both inverters: inductance values of the grid filters, unbalance of the delivered power, and the use of different modulation techniques., This research was funded by the Spanish "Ministerio de Asuntos Economicos y Transformacion Digital" and the European Regional Development Fund (ERDF), under grants RTI2018100732-B-C21 and PID2021-122835OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compensation of Reactive Power and Unbalanced Power in Three-Phase Three-Wire Systems Connected to an Infinite Power Network

  • Blasco Espinosa, Pedro Angel|||0000-0002-0986-9154
  • Montoya-Mira, Rafael
  • Diez-Aznar, José-Manuel|||0000-0002-9414-3517
  • Montoya Villena, Rafael|||0000-0003-1400-4064
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
[EN] The compensation of an electrical system from passive compensators mainly focuses on linear systems where the consumption of charges does not vary significantly over time. In three-phase three-wire systems, when the network voltages are unbalanced, negative-sequence voltages and currents appear, which can significantly increase the total apparent power supplied by the network. This also increases the network losses. This paper presents a method for calculating the compensation of the positive-sequence reactive power and unbalanced powers caused by the negative-sequence line currents using reactive elements (coils and/or capacitors). The compensation is applied to three-phase three-wire linear systems with unbalanced voltages and loads, which are connected to an infinite power network. The method is independent of the load characteristics, where only the line-to-line voltages and line currents, at the point where compensation is desired, need to be known in advance. The solution obtained is optimal, and the system observed from the network behaves as one that only consumes the active power required by a load with a fully balanced current system. To understand the proposed method and demonstrate its validity, a case study of a three-phase three-wire linear system connected to an infinite power network with unbalanced voltages and currents is conducted., This work is supported by the Spanish Ministry of Science, Innovation and Universities (MICINN) and the European Regional Development Fund (ERDF) under Grant RTI2018-100732-B-C21.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Method to Enhance the Global Efficiency of High-Power Photovoltaic Inverters Connected in Parallel

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
[EN] Central inverters are usually employed in large photovoltaic farms because they offer a good compromise between costs and efficiency. However, inverters based on a single power stage have poor efficiency in the low power range, when the irradiation conditions are low. For that reason, an extended solution has been the parallel connection of several inverter modules that manage a fraction of the full power. Besides other benefits, this power architecture can improve the efficiency of the whole system by connecting or disconnecting the modules depending on the amount of managed power. In this work, a control technique is proposed that maximizes the global efficiency of this kind of systems. The developed algorithm uses a functional model of the inverters¿ efficiency to decide the number of modules on stream. This model takes into account both the power that is instantaneously processed and the maximum power point tracking (MPPT) voltage that is applied to the photovoltaic field. A comparative study of several models of efficiency for photovoltaic inverters is carried out, showing that bidimensional models are the best choice for this kind of systems. The proposed algorithm has been evaluated by considering the real characteristics of commercial inverters, showing that a significant improvement of the global efficiency is obtained at the low power range in the case of sunny days. Moreover, the proposed technique dramatically improves the global efficiency in cloudy days., This work is supported by the Spanish Ministry of Economy and Competitiveness (MINECO), the European Regional Development Fund (ERDF) under Grants ENE2015-64087-C2-2-R and RTI2018-100732-B-C21, and the Spanish Ministry of Education (FPU15/01274).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DC-Bus Signaling control laws for the operation of DC-microgrids with renewable power sources

  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Torán, Enric|||0000-0002-0868-9856
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Liberos, Marian|||0000-0001-6574-1158
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
  • Garcerá, Gabriel|||0000-0002-5507-4379
[EN] DC-Bus Signaling (DBS) is a proven method to coordinate different microgrid agents, using the DC voltage of the microgrid as a communication signal. The droop control applied in a DC microgrid achieves accurate power-sharing among converters while leading to a certain voltage regulation error in the microgrid bus. The behaviour of the different agents in a microgrid is managed by using the voltage at each node of the microgrid as the DBS signal. The technique proposed in this paper uses an improved DBS technique to coordinate interlinking converters, photovoltaic generators, Energy Storage Systems and loads in a microgrid. The operation of the renewable power sources of a microgrid at the full generated power is desired due to economic and environmental reasons. The DBS technique proposed in this paper is adapted to integrate renewable power sources in the microgrid. The DBS-controlled Energy Storage Systems (ESS) will store the surplus energy if the generated power exceeds consumption. In the case of fully charged ESS, the renewable generators will limit their output power to those demanded by the loads. The proposed control laws have been tested in an experimental microgrid., This research was funded by the Spanish Ministerio de Asuntos Económicos y Transformación Digital and the European Regional Development Fund (ERDF) under Grants RTI2018-100732-B-C21 and PID2021-122835OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 5 REMOTEWEAK Control Scheme Surpress Circulating Currents Parallel 3Phase Inverters [Dataset]

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
This dataset is about the experimental results obtained and published in the article "A Control Scheme to Suppress Circulating Currents in Parallel-Connected Three-Phase Inverters": Liberos, M.; Gonzalez-Medina, R.; Patrao, I.; Garcera , G.; Figueres, E. Electronics 2022, 11, 3720. DOI: 10.3390/electronics11223720 The parallel operation of inverters has many benefits, such as modularity and redundancy. However, the parallel connection of inverters produces circulating currents that may result in malfunctions of the system. In this work, a control technique for the elimination of the low-frequency components of the circulating currents in grid-connected inverters is presented. The proposed control structure contains n - 1 zero-sequence control loops, with n being the number of inverters connected in parallel. Simulation and experimental results have been carried out on a prototype composed of two 5 kW inverters connected in parallel. The results have been obtained by considering the following mismatches between both inverters: inductance values of the grid filters, unbalance of the delivered power, and the use of different modulation techniques.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Study of the Parameter Mismatch Effects on the Low Frequency Circulating Currents of Parallel Three Phase Inverters

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Torán, Enric|||0000-0002-0868-9856
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
[EN] When converters are connected in parallel, a system with some benefits, including modularity and redundancy, is obtained. However, in these circumstances, circulating currents can appear that produce some adverse effects. In this work, a study of the low-frequency circulating currents that appear in three-phase inverters connected in parallel is performed. The study is focused on the effects produced by the parameter mismatch, namely inductance mismatches, power imbalance, and the use of different pulse with modulation (PWM) techniques. The nature of the circulating current produced by each of these factors were analyzed separately. Both simulation and experimental results are shown, which were obtained using a three-phase 10-kW prototype composed of two 5-kW inverters connected in parallel., This work was supported by the Spanish Ministerio de Asuntos Económicos y Transformación Digital and the European Regional Development Fund (ERDF) under Grants RTI2018- 100732-B-C21 and PID2021-122835OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 6 REMOTEWEAK Experimental Study of the Parameter Mismatch Effects on the Low Frequency Circulating Currents of Parallel Three Phase Inverters [Dataset]

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Torán, Enric|||0000-0002-0868-9856
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
This dataset is about the experimental results obtained and published in the article "Experimental Study of the Parameter Mismatch Effects on the Low Frequency Circulating Currents of Parallel Three Phase Inverters":Liberos, M.; González-Medina, R.; Patrao, I.; Torán, E.; Garcerá, G.; Figueres, E. Eng 2023, 4, 1356-1376. DOI: 10.3390/eng4020079 When converters are connected in parallel, a system with some benefits, including modularity and redundancy, is obtained. However, in these circumstances, circulating currents can appear that produce some adverse effects. In this work, a study of the low-frequency circulating currents that appear in three-phase inverters connected in parallel is performed. The study is focused on the effects produced by the parameter mismatch, namely inductance mismatches, power imbalance, and the use of different pulse with modulation (PWM) techniques. The nature of the circulating current produced by each of these factors were analyzed separately. Both simulation and experimental results are shown, which were obtained using a three-phase 10-kW prototype composed of two 5-kW inverters connected in parallel
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 9 REMOTEWEAK: Comparative Analysis B4 and B6 Grid Connected Inverters [Dataset]

  • Torán, Enric|||0000-0002-0868-9856
  • Liberos, Marian|||0000-0001-6574-1158
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
A theoretical analysis of a three-phase grid-connected B4 photovoltaic inverter was carried out, including modeling, control design, and stability assessment of the current and voltage control loops. The influence of photovoltaic voltage and grid inductance variations was analyzed through a parametric stability study. Finally, simulation-based evaluations were performed under ideal and distorted grid conditions to assess harmonic behavior, DC bus voltage ripple, and overall system performance., Funded by the Ministerio de Ciencia e Innovacion of Spain and the European Regional Development Fund (ERDF) under Grant RTI2018-100732-B-C21-AR. Funded by the Ministerio de Ciencia e Innovacion of Spain and the European Regional Development Fund (ERDF) under Grant PID2021-122835OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Otro producto de investigación Plan de Gestión de Datos (DataManagementPlan)

Remoteweak-Improvement of the Power Quality in Remote Power Systems with Weak Grid Connexion and High Penetration of Power Electronic Converters (PID2021-122835OB-C22) [DMP], Remoteweak-mejora de la calidad de potencia en sistemas de potencia remotos con conexión a red débil y elevada penetración de convertidores electrónicos de potencia (PID2021-122835OB-C22)

  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
  • Torán, Enric|||0000-0002-0868-9856
  • Liberos, Marian|||0000-0001-6574-1158
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • González-Medina, Raúl|||0000-0003-0378-5045
Remote power systems require the operation of local generation resources, energy storage systems and loads in a harsh environment in which either there is no connection to the public electric grid (off-grid systems) or the grid is extremely weak and full of abnormalities. The general goal of this project is to improve the characteristics of remote power systems by means of power electronics converters. The data are organized in 9 main folders, each folder corresponding to a publication derived from the REMOTEWEAK project. The publications are journal papers or papers published in proceedings of international conferences, This project was funded by the Ministerio de Ciencia e Innovación of Spain and the European Regional Development Fund (ERDF) under Grant PID2021-122835OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comparative analysis of B4 and B6 inverter topologies for grid-connected operation

  • Torán, Enric|||0000-0002-0868-9856
  • Liberos, Marian|||0000-0001-6574-1158
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
[EN] This paper analyzes the performance of several topologies of grid-connected inverters. For that purpose, a comparative analysis has been carried out among a classical sixswitch three-phase inverter (B6) and several alternatives of the four-switch three-phase inverter topology (B4). As figures of merit to carry out the comparative study, the efficiency, the total harmonic distortion of the current in the grid, the unbalance of the grid currents and the cost of each alternative have been considered. The performance of the inverters has been evaluated by means of realistic simulations, which have been carried out with PSIMTM software., This research was funded by the Spanish Ministerio de Asuntos Económicos y Transformación Digital and the European Regional Development Fund (ERDF) under Grants RTI2018-100732-B-C21 and PID2021-122835OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Suppression of circulating currents in islanded parallel inverters

  • Liberos, Marian|||0000-0001-6574-1158
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Torán, Enric|||0000-0002-0868-9856
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
[EN] The parallel connection of inverters has some advantages like modularity and redundancy. Nevertheless, the connection in parallel of inverters produces circulating currents that cause adverse effects in the system. In this work, it is presented a control technique for the elimination of the circulating currents. In parallel inverters, the circulating currents agree with the zero-sequence component of the phase currents, so they are suppressed by controlling the zerosequence component of the phase currents of the inverters. Simulation results have been presented considering the connection in parallel of two 5 kW inverters connected in parallel in islanded mode. The results have been obtained by considering linear and non-linear AC loads., This research was funded by the Spanish Ministerio de Asuntos Económicos y Transformación Digital and the European Regional Development Fund (ERDF) under Grants RTI2018-100732-B-C21 and PID2021-122835OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Control Scheme without Sensors at the PV Source for Cost and Size Reduction in Two-Stage Grid Connected Inverters

  • González-Medina, Raúl|||0000-0003-0378-5045
  • Liberos, Marian|||0000-0001-6574-1158
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Marzal Romeu, Silvia
[EN] In order to reduce the cost of PV facilities, the market requires low cost and highly reliable PV inverters, which must comply with several regulations. Some research has focused on decreasing the distortion of the current injected into the grid, reducing the size of the DC-link capacitors and removing sensors, while keeping a good performance of the maximum power point tracking (MPPT) algorithms. Although those objectives are different, all of them are linked to the inverter DC-link voltage control loop. Both the reduction of the DC-link capacitance and the use of sensorless MPPTalgorithms require a voltage control loop faster than that of conventional implementations in order to perform properly, but the distortion of the current injected into the grid might rise as a result. This research studies a complete solution for two-stage grid-connected PV inverters, based on the features of second-order generalized integrators. The experimental tests show that the proposed implementation has a performance similar to that of the conventional control of two-stage PV inverters but at a much lower cost., This work has been co-financed by the Spanish Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Fund (ERDF) under Grant ENE2015-64087-C2-2-R and by the Spanish Ministry of Science, Innovation and University (MICINN) and the European Regional Development Fund (ERDF) under Grant RTI2018-100732-B-C21. The European Regional Development Fund (ERDF) and the Generalitat Valenciana (GVA) financed the purchase of the Cinergia GE&EL 50 grid emulator and electronic load used during the experimental part of this work under Grant IDIFEDER/2018/036.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Experiment 2 REMOTEWEAK Control Parallel Interlinking Inverters Hybrid ACDC Microgrid [Dataset]

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • Torán, Enric|||0000-0002-0868-9856
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
Having two or more interlinking converters connected in parallel in hybrid microgrids with AC and DC buses has some benefits, like modularity, flexibility, and redundancy. However, the parallelization of the inverters leads to circulating currents that can cause system malfunctions. This work uses a method for suppressing low-frequency circulating currents in interlinking converters by controlling the zero-sequence component of the phase currents, showing that the control structure is valid for interlinking converters. The proposed control scheme has been applied to two parallel interlinking inverters of 5 kW and 2.5 kW, respectively. The interlinking inverters are connected to the grid, and they control the voltage in the DC bus of the hybrid microgrid. To validate the concept, simulation and experimental results are shown.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Alternate Representation of the Vector of Apparent Power and Unbalanced Power in Three-Phase Electrical Systems

  • Blasco Espinosa, Pedro Angel|||0000-0002-0986-9154
  • Montoya-Mira, Rafael
  • Diez-Aznar, José-Manuel|||0000-0002-9414-3517
  • Montoya Villena, Rafael|||0000-0003-1400-4064
[EN] Low-voltage distribution systems are typically unbalanced. These ine¿ciencies cause unbalanced powers that can significantly increase the apparent power of the system. Analysing and measuring these ine¿cient powers appropriately allows us to compensate for them and obtain a more e¿cient system. Correcting the imbalance at some nodes can worsen the rest of the system; therefore, it is essential that all nodes are analysed such that action can be taken when necessary. In most studies, the unbalanced power is measured from the modulus. Other more recent studies have proposed phasor expressions of unbalanced powers; however, in both cases, these are not enough to address the compensation of unbalanced powers in systems with unbalanced voltages. In this work, a di¿erent representation of the vector expressions for analysis of the unbalanced powers and the apparent powers of the three-phase linear systems is proposed. Additionally, these vector expressions are extended to nonlinear systems to quantify the harmonic apparent powers. These expressions have been formulated from the power of Buchholz and are valid for systems with unbalanced voltages and currents. To help understand the use of the proposed formulation, a practical case of a three-phase four-wire system with unbalanced loads and voltages is demonstrated., This work is supported by the Spanish Ministry of Science, Innovation and Universities (MICINN) and the European Regional Development Fund (ERDF) under Grant RTI2018-100732-B-C21.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Algorithm for Emulating Photovoltaic Strings With Dynamic Partial Shadowing Capability: A Practical Study

  • Patrao Herrero, Iván|||0000-0003-4412-0365
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
[EN] In photovoltaic (PV) systems, a maximum power point tracking (MPPT) algorithm is needed to maximize the energy obtained from the PV strings [1] , [2] . A bad tracking of the maximum power point (MPP) degrades the overall performance of the photovoltaic facilities [3] , [4] , [5] , [6] . The panels in a PV string may be working under different operating conditions of irradiance and temperature because of eventual shades produced by near obstacles, different orientation of modules or dusting, resulting in the partial shadowing phenomenon [7] , [8] ., This work has been supported by the Spanish Ministry of Science and Innovation and by the European Regional Development Fund under Grant RTI2018-100732-B-C21.