Pasar al contenido principal

MISIONES COORDINADAS COMPLEJAS DE INSPECCION Y SEGURIDAD DESARROLLADAS POR UAVS EN COOPERACION CON UGV

RTI2018-100847-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building the executive system of autonomous aerial robots using the Aerostack open-source framework

  • Molina González, Martín
  • Carrera, Abraham
  • Camporredondo Portela, Alberto
  • Bavle, Hriday
  • Rodriguez Ramos, Alejandro
  • Campoy Cervera, Pascual
A variety of open-source software tools are currently available to help building autonomous mobile robots. These tools have proven their effectiveness in developing different types of robotic systems, but there are still needs related to safety and efficiency that are not sufficiently covered. This article describes recent advances in the Aerostack software framework to address part of these needs, which may become critical in the case of aerial robots. The article describes a software tool that helps to develop the executive system, an important component of the control architecture whose characteristics significantly affect the quality of the final autonomous robotic system. The presented tool uses an original solution for execution control that aims at simplifying mission specification and protecting against errors, considering also the efficiency needs of aerial robots. The effectiveness of the tool was evaluated by building an experimental autonomous robot. The results of the evaluation show that it provides significant benefits about usability and reliability with acceptable development effort and computational cost. The tool is based on Robot Operating System and it is publicly available as part of the last release of the Aerostack software framework (version 3.0)., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: Part of the work presented in this article has been developed as a project supported by the European Union’s Horizon 2020 Research and Innovation Program under the Project ROSIN (no. 732287). This work has also received funding from the Spanish Ministry of Science, Innovation and Universities through the project RTI2018-100847-B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

VPS-SLAM: Visual Planar Semantic SLAM for Aerial Robotic Systems

  • Bavle, H.
  • De La Puente, P.
  • How, J. P.
  • Campoy, P.
Indoor environments have abundant presence of high-level semantic information which can provide a better understanding of the environment for robots to improve the uncertainty in their pose estimate. Although semantic information has proved to be useful, there are several challenges faced by the research community to accurately perceive, extract and utilize such semantic information from the environment. In order to address these challenges, in this paper we present a lightweight and real-time visual semantic SLAM framework running on board aerial robotic platforms. This novel method combines low-level visual/visual-inertial odometry (VO/VIO) along with geometrical information corresponding to planar surfaces extracted from detected semantic objects. Extracting the planar surfaces from selected semantic objects provides enhanced robustness and makes it possible to precisely improve the metric estimates rapidly, simultaneously generalizing to several object instances irrespective of their shape and size. Our graph-based approach can integrate several state of the art VO/VIO algorithms along with the state of the art object detectors in order to estimate the complete 6DoF pose of the robot while simultaneously creating a sparse semantic map of the environment. No prior knowledge of the objects is required, which is a significant advantage over other works. We test our approach on a standard RGB-D dataset comparing its performance with the state of the art SLAM algorithms. We also perform several challenging indoor experiments validating our approach in presence of distinct environmental conditions and furthermore test it on board an aerial robot., This work was supported by the MISTI-Spain for the financial support in the project entitled Drone Autonomy and the Spanish Ministry of Economy and Competitivity for its funding Project (Complex Coordinated Inspection and Security missions by UAVs in cooperation with UGV) under Grant RTI2018-100847-B-C21. The work of Paloma de la Puente was supported in part by the Spanish Ministry of Economics and Competitivity under Grant DPI2017-86915-C3-3-R COGDRIVE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal Frontier-Based Autonomous Exploration in Unconstructed Environment Using RGB-D Sensor

  • Lu, Liang
  • Redondo, Carlos
  • Campoy, Pascual
Aerial robots are widely used in search and rescue applications because of their small size and high maneuvering. However, designing an autonomous exploration algorithm is still a challenging and open task, because of the limited payload and computing resources on board UAVs. This paper presents an autonomous exploration algorithm for the aerial robots that shows several improvements for being used in the search and rescue tasks. First of all, an RGB-D sensor is used to receive information from the environment and the OctoMap divides the environment into obstacles, free and unknown spaces. Then, a clustering algorithm is used to filter the frontiers extracted from the OctoMap, and an information gain based cost function is applied to choose the optimal frontier. At last, the feasible path is given by A* path planner and a safe corridor generation algorithm. The proposed algorithm has been tested and compared with baseline algorithms in three different environments with the map resolutions of 0.2 m, and 0.3 m. The experimental results show that the proposed algorithm has a shorter exploration path and can save more exploration time when compared with the state of the art. The algorithm has also been validated in the real flight experiments., This research was funded by the Spanish Ministry of Science, Innovation and Universities (COMCISE RTI2018-100847-B-C21, MCIU/AEI/FEDER, UE) and the Chinese Scholarship Council (CSC) for the Scholarship of the first author., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Autonomous aerial robot for high-speed search and intercept applications

  • Rodríguez Ramos, Alejandro
  • Álvarez Fernández, Adrián
  • Bavle, Hriday
  • Rodríguez Vázquez, Javier
  • Lu, Liang
  • Fernández Cortizas, Miguel
  • Suárez Fernández, Ramón A.
  • Rodelgo, Alberto
  • Santos Pérez, Carlos
  • Molina, Martin
  • Merino Martín, Luis
  • Caballero, Fernando
  • Campoy, Pascual
In recent years, high-speed navigation and environment interaction in the context of aerial robotics has become a field of interest for several academic and industrial research studies. In particular, Search and Intercept (SaI) applications for aerial robots pose a compelling research area due to their potential usability in several environments. Nevertheless, SaI tasks involve a challenging development regarding sensory weight, onboard computation resources, actuation design, and algorithms for perception and control, among others. In this work, a fully autonomous aerial robot for high-speed object grasping has been proposed. As an additional subtask, our system is able to autonomously pierce balloons located in poles close to the surface. Our first contribution is the design of the aerial robot at an actuation and sensory level consisting of a novel gripper design with additional sensors enabling the robot to grasp objects at high speeds. The second contribution is a complete software framework consisting of perception, state estimation, motion planning, motion control, and mission control in order to rapidly and robustly perform the autonomous grasping mission. Our approach has been validated in a challenging international competition and has shown outstanding results, being able to autonomously search, follow, and grasp a moving object at 6 m/s in an outdoor environment., Agencia Estatal de Investigación, Khalifa University