Pasar al contenido principal

ATENUACION NATURAL DE PATOGENOS Y CONTAMINANTES ORGANICOS EN MEDIO POROSO DURANTE OPERACIONES DE RECARGA GESTIONADA DE ACUIFEROS

RTI2018-101990-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Coupling flow, heat, and reactive transport modeling to reproduce in situ redox potential evolution: application to an infiltration pond

  • Rodríguez Escales, Paula-Felicidad|||0000-0003-1011-5306
  • Barba Ferrer, Maria del Carme|||0000-0001-7513-3754
  • Sánchez Vila, Francisco Javier|||0000-0002-1234-9897
  • Jacques, Diederik
  • Folch Sancho, Albert|||0000-0002-8490-1038
This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Environmental science & technology, copyright © American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acs.est.0c03056, Redox potential (Eh) measurements are widely used as indicators of the dominant reduction–oxidation reactions occurring underground. Yet, Eh data are mostly used in qualitative terms, as actual values cannot be used to distinguish uniquely the dominant redox processes at a sampling point and should therefore be combined with a detailed geochemical characterization of water samples. In this work, we have intensively characterized the redox potential of the first meter of soil in an infiltration pond recharged with river water using a set of in situ sensors measuring every 12 min during a 1 year period. This large amount of data combined with hydrogeochemical campaigns allowed developing a reactive transport model capable of reproducing the redox potential in space and time together with the site hydrochemistry. Our results showed that redox processes were mainly driven by the amount of sedimentary organic matter in the system as well as by seasonal variation of temperature. As a subsidiary result, our work emphasizes the need to use a fully coupled model of flow, heat transport, solute transport, and the geochemical reaction network to fully reproduce the Eh observations in the topsoil., This work was financially supported by MONOPOLIOS (RTI2018-101990-B-100, MINECO/FEDER), the EU project MARADENTRO (PCI2019-103425-WW2017), the Catalan Research Project RESTORA (ACA210/18/00040), and AGAUR (AQU - 2017 SGR 1485). The authors wish to acknowledge Comunitat d’Usuaris d’Aigües de la Cubeta de Sant Andreu de la Barca (CUACSA) and the Agència Catalana de l’Aigua for their cooperation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Lagrangian modeling of mixing-limited reactive transport in porous media: multirate interaction by exchange with the mean

  • Solé Marí, Guillem|||0000-0002-9890-079X
  • Fernández García, Daniel|||0000-0002-4667-3003
  • Sánchez Vila, Francisco Javier|||0000-0002-1234-9897
  • Bolster, Diogo
The presence of solute concentration fluctuations at spatial scales much below the scale of resolution is a major challenge for modeling reactive transport in porous media. Overlooking small-scale fluctuations, which is the usual procedure, often results in strong disagreements between field observations and model predictions, including, but not limited to, the overestimation of effective reaction rates. Existing innovative approaches that account for local reactant segregation do not provide a general mathematical formulation for the generation, transport, and decay of these fluctuations and their impact on chemical reactions. We propose a Lagrangian formulation based on the random motion of fluid particles carrying solute concentrations whose departure from the local mean is relaxed through multirate interaction by exchange with the mean (MRIEM). We derive and analyze the macroscopic descriptionof the local concentration covariance that emerges from the model, showing its potential to simulate the dynamics of mixing-limited processes. The action of hydrodynamic dispersion on coarse-scale concentration gradients is responsible for the production of local concentration covariance, whereas covariance destruction stems from the local mixing process represented by the MRIEM formulation. The temporal evolution of integrated mixing metrics in two simple scenarios shows the trends that characterize fully resolved physical systems, such as a late-time power law decay of the relative importance of incomplete mixing with respect to the total mixing. Experimental observations of mixing-limited reactive transport are successfully reproduced by the model., The authors thank the reviewers DavidBenson, Nick Engdahl, and Tim Ginnfor their very useful comments andsuggestions. This work was partiallysupported by the EuropeanComission,through Grant H2020‐MSCA‐ITN‐2018; by the Spanish Ministry ofEconomy and Competitiveness,through Grant PCIN‐2015‐248; by theSpanish Ministry of Science, Innovationand Universities, through GrantRTI2018‐101990‐B‐I00; and by theCatalan Agency for Management ofUniversity and Research Grants,through Grant 2017‐SGR‐1485. D. B.and G. S. M. acknowledge financialsupport by the U.S. Army ResearchOffice under Contract/GrantW911NF‐18‐1‐0338., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modeling reactive multi-component multi-phase flow for Geological Carbon Sequestration (GCS) with Matlab

  • Wang, Yufei
  • Fernández García, Daniel|||0000-0002-4667-3003
  • Saaltink, Maarten Willem|||0000-0003-0553-4573
We present a reactive multi-component multi-phase flow program for simulating Geological Carbon Sequestration (GCS), an approach that reduces carbon emissions by storing in deep subsurface formations. The program, called MRST_CO2, is implemented in the library Matlab Reservoir Simulation Toolbox (MRST). It can simulate multi-phase flow and transport of species undergoing chemical reactions and mass exchanges among gas, liquid and solid phases. Equations for flow, mass transport and chemical reactions are solved with a sequential iteration approach. The program was tested with a 1D benchmark. It has also been applied to heterogeneous 2D and 3D cases with a structured or unstructured grid., This work was partially supported by the European Commission, through project MARSOLUT (grant H2020-MSCA-ITN-2018); by the Spanish Ministry of Economy and Competitiveness, through project MONOPOLIOS (RTI 2018-101990-B-100, MINECO/ FEDER); and by the Catalan Agency for Management of University and Research Grants through FI 2017 (EMC/2199/2017)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modeling the fate of UV filters in subsurface: co-metabolic degradation and the role of biomass in sorption processes

  • Rodríguez Escales, Paula-Felicidad|||0000-0003-1011-5306
  • Sánchez Vila, Francisco Javier|||0000-0002-1234-9897
Ultraviolet filters (UVFs) are emerging organic compounds found in most water systems. They are constituents of personal care products, as well as industrial ones. The concentration of UVFs in the water bodies in space and time is mostly determined by degradation and sorption, both processes being determinant of their bioavailability and toxicity to ecosystems and humans. UVFs are a wide group of compounds, with different sorption behavior expected depending on the individual chemical properties (pKa,Koc,Kow). The goal of this work is framed in the context of improving our understanding of the sorption processes of UVFs occurring in the aquifer; that is, to evaluate the role of biomass growth, solid organic matter (SOM) and redox conditions in the characterization of sorption of a set of UVFs. We constructed a conceptual and a numerical model to evaluate the fate of selected UV filters, focused on both sorption and degradation. The models were validated with published data by Liu et al. (2013), consisting in a suite of batch experiments evaluating the fate of a cocktail of UVs under different redox conditions. The compounds evaluated included ionic UV filters (Benzophenone-3; 2-(3-t-butyl-2-hydroxy-5-methylphenyl)5-chloro-benzotriazole; 2-(2'-hydroxy-5'-octylphenyl)-benzotriazole) and neutral ones (octyl 4-methoxycinnamatte; and octocrylene)., We thank the reviewers for their comments and suggestions, which helped improve the quality of the manuscript. Financial support was provided by Spanish government, MONOPOLIOS PROJECT, RTI2018-101990-B-100 (MINECO/FEDER), MARADENTRO project (PCI2019-103425-WW2017), and Catalan government by the project 2017-SGR-1485 from Agència de Gestió d’Ajuts Universitaris i de Recerca., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Simulating degradation of organic compounds accounting for the growth of microorganisms (Monod kinetics) in a fully Lagrangian framework

  • Dawi, Malik Ali A.
  • Sánchez Vila, Francisco Javier|||0000-0002-1234-9897
Biologically mediated degradation of organic compounds in porous media is a complex mathematical problem, described by a non-linear differential equation. The organic compound gets in contact with the biomass, and an enzyme-catalysed reaction takes place. The net result is that part of the parent compound degrades into some daughter product, while some of the organic carbon is used for microbial growth. The rate of biomass growth in the presence of a limiting nutrient supply is usually modelled with the experimentally derived Monod equation, i.e., it is proportional to the actual existing biomass multiplied by a factor that is non-linear in terms of available organic matter. This non-linearity in the degradation equation implies a strong difficulty in directly implementing a numerical solution within a fully Lagrangian framework, and thus, numerical solutions have traditionally been sought in either an Eulerian, or else an Eulerian–Lagrangian framework. Here we pursue a fully Lagrangian solution to the problem. First, the Monod empirical equation is formulated as the outcome of a two-step reaction; while the approach is less general than other derivations existing in the literature based on a full understanding of the thermodynamics of the process, it allows two things: 1) providing some physical meaning to the actual parameters in the Monod equation, and more interestingly, 2) formulating a methodology for the solution of the degradation equation incorporating Monod kinetics by means of a particle tracking formulation. For the latter purpose, both reactants and biomass are represented by particles, and their location at any given time is represented by a kernel that accounts for the uncertainty in the actual physical location. By solving the reaction equation in a kernel framework, we can reproduce the Monod kinetics and, as a particular result in the case no biomass growth is allowed, the Michaelis–Menten kinetics. The methodology proposed is then successfully applied to reproduce two studies of microbially induced degradation of organic compounds in porous media, first, the observed kinetics of Pseudomonas putida F1 in batch reactors while growing on benzene, toluene and phenol, and second, the column study of carbon tetrachloride biodegradation by the denitrifying bacterium Pseudomonas Stutzeri KC., This work was partially supported by the Spanish Ministry of Economy and Competitiveness, project MONOPOLIOS (RTI 2018–101990-B-I00, MINECO/FEDER); and by the Catalan Agency for Management of University and Research Grants through FI 2017 (EMC/2199/2017). M. D. acknowledges the support of the Grant CEX2018-000797-S funded by MCIN/AEI/10.13039/501100011033., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modeling reactive multi-component multi-phase flow for Geological Carbon Sequestration (GCS) with Matlab

  • Wang, Yufei
  • Fernández García, Daniel
  • Saaltink, Maarten Willem
We present a reactive multi-component multi-phase flow program for simulating Geological Carbon Sequestration (GCS), an approach that reduces carbon emissions by storing in deep subsurface formations. The program, called MRST_CO2, is implemented in the library Matlab Reservoir Simulation Toolbox (MRST). It can simulate multi-phase flow and transport of species undergoing chemical reactions and mass exchanges among gas, liquid and solid phases. Equations for flow, mass transport and chemical reactions are solved with a sequential iteration approach. The program was tested with a 1D benchmark. It has also been applied to heterogeneous 2D and 3D cases with a structured or unstructured grid., This work was partially supported by the European Commission, through project MARSOLUT (grant H2020-MSCA-ITN-2018); by the Spanish Ministry of Economy and Competitiveness, through project MONOPOLIOS (RTI 2018-101990-B-100, MINECO/ FEDER); and by the Catalan Agency for Management of University and Research Grants through FI 2017 (EMC/2199/2017)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Simulating degradation of organic compounds accounting for the growth of microorganisms (Monod kinetics) in a fully Lagrangian framework

  • Dawi, Malik Ali A.
  • Sánchez Vila, Francisco Javier
Biologically mediated degradation of organic compounds in porous media is a complex mathematical problem, described by a non-linear differential equation. The organic compound gets in contact with the biomass, and an enzyme-catalysed reaction takes place. The net result is that part of the parent compound degrades into some daughter product, while some of the organic carbon is used for microbial growth. The rate of biomass growth in the presence of a limiting nutrient supply is usually modelled with the experimentally derived Monod equation, i.e., it is proportional to the actual existing biomass multiplied by a factor that is non-linear in terms of available organic matter. This non-linearity in the degradation equation implies a strong difficulty in directly implementing a numerical solution within a fully Lagrangian framework, and thus, numerical solutions have traditionally been sought in either an Eulerian, or else an Eulerian–Lagrangian framework. Here we pursue a fully Lagrangian solution to the problem. First, the Monod empirical equation is formulated as the outcome of a two-step reaction; while the approach is less general than other derivations existing in the literature based on a full understanding of the thermodynamics of the process, it allows two things: 1) providing some physical meaning to the actual parameters in the Monod equation, and more interestingly, 2) formulating a methodology for the solution of the degradation equation incorporating Monod kinetics by means of a particle tracking formulation. For the latter purpose, both reactants and biomass are represented by particles, and their location at any given time is represented by a kernel that accounts for the uncertainty in the actual physical location. By solving the reaction equation in a kernel framework, we can reproduce the Monod kinetics and, as a particular result in the case no biomass growth is allowed, the Michaelis–Menten kinetics. The methodology proposed is then successfully applied to reproduce two studies of microbially induced degradation of organic compounds in porous media, first, the observed kinetics of Pseudomonas putida F1 in batch reactors while growing on benzene, toluene and phenol, and second, the column study of carbon tetrachloride biodegradation by the denitrifying bacterium Pseudomonas Stutzeri KC., This work was partially supported by the Spanish Ministry of Economy and Competitiveness, project MONOPOLIOS (RTI 2018–101990-B-I00, MINECO/FEDER); and by the Catalan Agency for Management of University and Research Grants through FI 2017 (EMC/2199/2017). M. D. acknowledges the support of the Grant CEX2018-000797-S funded by MCIN/AEI/10.13039/501100011033., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Coupling flow, heat, and reactive transport modeling to reproduce in situ redox potential evolution: application to an infiltration pond

  • Rodríguez Escales, Paula-Felicidad
  • Barba Ferrer, Maria del Carme
  • Sánchez Vila, Francisco Javier
  • Jacques, Diederik
  • Folch Sancho, Albert
This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Environmental science & technology, copyright © American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acs.est.0c03056, Redox potential (Eh) measurements are widely used as indicators of the dominant reduction–oxidation reactions occurring underground. Yet, Eh data are mostly used in qualitative terms, as actual values cannot be used to distinguish uniquely the dominant redox processes at a sampling point and should therefore be combined with a detailed geochemical characterization of water samples. In this work, we have intensively characterized the redox potential of the first meter of soil in an infiltration pond recharged with river water using a set of in situ sensors measuring every 12 min during a 1 year period. This large amount of data combined with hydrogeochemical campaigns allowed developing a reactive transport model capable of reproducing the redox potential in space and time together with the site hydrochemistry. Our results showed that redox processes were mainly driven by the amount of sedimentary organic matter in the system as well as by seasonal variation of temperature. As a subsidiary result, our work emphasizes the need to use a fully coupled model of flow, heat transport, solute transport, and the geochemical reaction network to fully reproduce the Eh observations in the topsoil., This work was financially supported by MONOPOLIOS (RTI2018-101990-B-100, MINECO/FEDER), the EU project MARADENTRO (PCI2019-103425-WW2017), the Catalan Research Project RESTORA (ACA210/18/00040), and AGAUR (AQU - 2017 SGR 1485). The authors wish to acknowledge Comunitat d’Usuaris d’Aigües de la Cubeta de Sant Andreu de la Barca (CUACSA) and the Agència Catalana de l’Aigua for their cooperation., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modeling the fate of UV filters in subsurface: co-metabolic degradation and the role of biomass in sorption processes

  • Rodríguez Escales, Paula-Felicidad
  • Sánchez Vila, Francisco Javier
Ultraviolet filters (UVFs) are emerging organic compounds found in most water systems. They are constituents of personal care products, as well as industrial ones. The concentration of UVFs in the water bodies in space and time is mostly determined by degradation and sorption, both processes being determinant of their bioavailability and toxicity to ecosystems and humans. UVFs are a wide group of compounds, with different sorption behavior expected depending on the individual chemical properties (pKa,Koc,Kow). The goal of this work is framed in the context of improving our understanding of the sorption processes of UVFs occurring in the aquifer; that is, to evaluate the role of biomass growth, solid organic matter (SOM) and redox conditions in the characterization of sorption of a set of UVFs. We constructed a conceptual and a numerical model to evaluate the fate of selected UV filters, focused on both sorption and degradation. The models were validated with published data by Liu et al. (2013), consisting in a suite of batch experiments evaluating the fate of a cocktail of UVs under different redox conditions. The compounds evaluated included ionic UV filters (Benzophenone-3; 2-(3-t-butyl-2-hydroxy-5-methylphenyl)5-chloro-benzotriazole; 2-(2'-hydroxy-5'-octylphenyl)-benzotriazole) and neutral ones (octyl 4-methoxycinnamatte; and octocrylene)., We thank the reviewers for their comments and suggestions, which helped improve the quality of the manuscript. Financial support was provided by Spanish government, MONOPOLIOS PROJECT, RTI2018-101990-B-100 (MINECO/FEDER), MARADENTRO project (PCI2019-103425-WW2017), and Catalan government by the project 2017-SGR-1485 from Agència de Gestió d’Ajuts Universitaris i de Recerca., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Lagrangian modeling of mixing-limited reactive transport in porous media: multirate interaction by exchange with the mean

  • Solé Marí, Guillem
  • Fernández García, Daniel
  • Sánchez Vila, Francisco Javier
  • Bolster, Diogo
The presence of solute concentration fluctuations at spatial scales much below the scale of resolution is a major challenge for modeling reactive transport in porous media. Overlooking small-scale fluctuations, which is the usual procedure, often results in strong disagreements between field observations and model predictions, including, but not limited to, the overestimation of effective reaction rates. Existing innovative approaches that account for local reactant segregation do not provide a general mathematical formulation for the generation, transport, and decay of these fluctuations and their impact on chemical reactions. We propose a Lagrangian formulation based on the random motion of fluid particles carrying solute concentrations whose departure from the local mean is relaxed through multirate interaction by exchange with the mean (MRIEM). We derive and analyze the macroscopic descriptionof the local concentration covariance that emerges from the model, showing its potential to simulate the dynamics of mixing-limited processes. The action of hydrodynamic dispersion on coarse-scale concentration gradients is responsible for the production of local concentration covariance, whereas covariance destruction stems from the local mixing process represented by the MRIEM formulation. The temporal evolution of integrated mixing metrics in two simple scenarios shows the trends that characterize fully resolved physical systems, such as a late-time power law decay of the relative importance of incomplete mixing with respect to the total mixing. Experimental observations of mixing-limited reactive transport are successfully reproduced by the model., The authors thank the reviewers DavidBenson, Nick Engdahl, and Tim Ginnfor their very useful comments andsuggestions. This work was partiallysupported by the EuropeanComission,through Grant H2020‐MSCA‐ITN‐2018; by the Spanish Ministry ofEconomy and Competitiveness,through Grant PCIN‐2015‐248; by theSpanish Ministry of Science, Innovationand Universities, through GrantRTI2018‐101990‐B‐I00; and by theCatalan Agency for Management ofUniversity and Research Grants,through Grant 2017‐SGR‐1485. D. B.and G. S. M. acknowledge financialsupport by the U.S. Army ResearchOffice under Contract/GrantW911NF‐18‐1‐0338., Peer Reviewed, Postprint (published version)