Pasar al contenido principal

-

RYC-2012-11856

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Contratación e Incorporación de RRHH
Subprograma Subprograma Ramón y Cajal (RYC)
Convocatoria Ramón y Cajal
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ZARAGOZA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Determination of volatile non intentionally added substances coming from a starch-based biopolymer intended for food contact by different gas chromatography-mass spectrometry approaches

  • Osorio, J.
  • Dreolin, N.
  • Aznar, M.
  • Nerín, C.
  • Hancock, P.
The rapid growth of polymer technology in the field of food contact materials (FCMs) needs to be supported by continuous improvement in material testing, in order to ensure the safety of foodstuff. In this work, a range of different starch-based biopolymer samples, in the shape of pellets and retail samples (cups and dishes) were studied. The optimized extraction process was performed on three different pellet shapes: pellets with no modification (spherical), pellets shattered under high pressure (lentils), and pellets cryogenically ground (powder). The analysis of unknown volatile and semi-volatile compounds was carried out by gas chromatography-mass spectrometry, using both electron ionization with a single quadrupole mass analyzer (GC-EI-MS), and atmospheric pressure gas chromatography with a quadrupole/time of flight mass analyzer (APGC-Q/ToF). The identification process was implemented using the latest advances in the understanding of APGC ionization pathways. Chemical migration was also assessed on prototype samples using the food simulants: ethanol 10% v/v, acetic acid 3% w/V, ethanol 95% v/v, isooctane, and vegetable oil. Each migration test was performed three consecutive times, as recommended for materials intended for repeated use.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Raman spectroscopy, electronic microscopy and SPME-GC-MS to elucidate the mode of action of a new antimicrobial food packaging material

  • Clemente, Isabel
  • Aznar, Margarita
  • Salafranca, Jesús
  • Nerín, Crisitna
One critical challenge when developing a new antimicrobial packaging material is to demonstrate the mode of action of the antimicrobials incorporated into the packaging. For this task, several analytical techniques as well as microbiology are required. In this work, the antimicrobial properties of benzyl isothiocyanate, allyl isothiocyanate and essential oils of cinnamon and oregano against several moulds and bacteria have been evaluated. Benzyl isothiocyanate showed the highest antimicrobial activity and it was selected for developing the new active packaging material. Scanning electron microscopy and Raman spectroscopy were successfully used to demonstrate the mode of action of benzyl isothiocyanate on Escherichia coli. Bacteria exhibited external modifications such as oval shape and the presence of septum surface, but they did not show any disruption or membrane damage. To provide data on the in vitro action of benzyl isothiocyanate and the presence of inhibition halos, the transfer mechanism to the cells was assessed using solid-phase microextraction–gas chromatography–mass spectrometry. Based on the transfer system, action mechanism and its stronger antimicrobial activity, benzyl isothiocyanate was incorporated to two kinds of antimicrobial labels. The labels were stable and active for 140 days against two mould producers of ochratoxin A; Penicillium verrucosum is more sensitive than Aspergillus ochraceus. Details about the analytical techniques and the results obtained are shown and discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Release of volatile compounds from cooking plastic bags under different heating sources

  • Aznar, Margarita
  • Domeño, Celia
  • Osorio, Jazmín
  • Nerin, Cristina
The use of packaging materials at very high temperatures, such as in-pack cooking, could lead to the formation of odorous compounds and also to the transference of migrants to food. In this work, the effect of high temperature or microwave cooking has been studied for 2 different cooking bags. The study was performed by gas-chromatography coupled to mass spectrometry and to olfactometric detection (GC-MS-O). The results showed that the bags heated in a conventional oven had a higher effect on the increment of odor impact compounds from the packaging than those heated in microwaves. Aldehydes and ketones were the major responsible for the odors detected in the olfactometry. Migration experiments to different food simulants (ethanol 10%, vegetable oil and ethanol 95%) and food samples (chicken) were also performed. In migration to food simulants, migrants were only detected in ethanol 10 %: 1-nonanol was detected below the specific migration limit established in the European Regulations and nonanal and decanal were below 10 ng/g. In migration to chicken a total of 27 compounds, mostly aldehydes, were transferred to it under the worst case migration conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fabric phase sorptive extraction as a reliable tool for rapid screening and detection of freshness markers in oranges

  • Aznar, M.
  • Úbeda, S.
  • Nerin, C.
  • Kabir, A.
  • Furton, K.G.
A simple, fast and sensitive analyte extraction method based on fabric phase sorptive extraction (FPSE) followed by gas chromatography-mass spectrometry (GC–MS) and ultra-performance liquid chromatography-quadrupole time of flight mass spectrometry (UPLC–QTOF–MS) analysis was developed for the analysis of 12 volatile compounds that represent most of the principal chemical families possessing different polarities and volatilities. Five FPSE media coated with different sol-gel sorbent chemistries having different polarities and selectivities were studied: long chain poly(dimethylsiloxane) (PDMS), short chain poly(tetrahydrofuran) (PTHF), Carbowax 20M (CW20M), short chain poly(dimethyl siloxane) (SC PDMS) and polyethylene glycol-polypropylene glycol-polyethylene glycol triblock copolymer (PEG-PPG-PEG). CW20M coated FPSE media was found to be the most efficient extraction media for the analytes of interest in the intended study. The developed methodology was applied to the analysis of orange juice obtained from fresh oranges and oranges after storing at 5 °C for two months in order to identify the best chemical markers, both volatiles and non-volatiles, attributed to the freshness of orange. For this purpose, aliquots of the same juice extracts were analysed by GC–MS as well as by UPLC–QTOF–MS. Monoterpenes and terpenoids, such as terpinene, citronellal or estragole were among the volatile compounds that endured the biggest decrease after the extended storage period. Three non-volatile compounds including one amide (subaphyllin) and two flavanoids (tangeretin and nobiletin) also showed a clear decrease in signal intensity (>70%) after orange stored for two months.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Determination of oligomers in virgin and recycled polyethylene terephthalate (PET) samples by UPLC-MS-QTOF

  • Ubeda, Sara
  • Aznar, Margarita
  • Nerín, Cristina
An oligomer is a molecule that consists of a few monomer units. It can be formed during polymer manufacturing and also due to polymer degradation processes or even during use conditions. Since oligomers are not included in chemical databases, their identification is a complex process. In this work, the oligomers present in 20 different PET pellet samples have been determined. Two different sample treatment procedures, solvent extraction and total dissolution, were applied in order to select the most efficient one. The analyses were carried out by UPLC-MS-QTOF. The use of high resolution mass spectrometry allowed the structural elucidation of these compounds and their correct identification. The main oligomers identified were cyclic as well as lineal from the first, second, and third series. All of them were composed of terephthalic acid (TPA), diethylene glycol (DEG), and ethylene glycol (EG). Quantitative values were very different in both procedures. In total dissolution of PET samples, the concentration of oligomers was always, at least, 10 times higher than in solvent extraction; some of the compounds were only detected when total dissolution was used. Results showed that the oligomers with the highest concentration values were dimers and trimers, cyclic, as well as lineal, from the first and second series. The oligomer with the maximum concentration value was TPA2-EG-DEG that was found in all the samples in a concentration range from 2493 to 19, 290 ng/g PET. No differences between virgin and recycled PET were found. Migration experiments were performed in two PET bottles, and results showed the transference of most of these oligomers to a fat food simulant (ethanol 95%).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Migration of oligomers from a food contact biopolymer based on polylactic acid (PLA) and polyester

  • Ubeda, Sara
  • Aznar, Margarita
  • Alfaro, Pilar
  • Nerín, Cristina
Polylactic acid (PLA) is a biopolymer commonly used in food packaging due to its good characteristics, similar to PET. To evaluate the safety of this material, the analysis of the non-intentionally added substances (NIAS) is required. Oligomers are NIAS and their behavior needs a deep study, especially if they migrate to the food. In this work, the analysis of the polymer and the migration to food simulants was carried out. A total dissolution/precipitation procedure was applied to PLA pellets and films, using dichloromethane and ethanol as solvent and antisolvent system respectively. The migration tests were carried out in three liquid simulants to mimic any kind of food. Since oligomers are not present in the positive list of the Directive 10/2011/EC, their concentration must be below the 0.01 mg/kg of food. UPLC-QTOF-MS, with and without ion mobility (IM), was used for the analysis. Thirty-nine different PLA oligomers made of repeated monomer units of [LA] (C3H4O2) and with different structures were identified. They corresponded to cyclic oligomers with [LA]n structure and two groups of linear oligomers, one with an hydroxyl group, OH–[LA]n–H, and the other one with an ethoxy group, CH3–CH2–O–[LA]n–H. Cyclic oligomers only appeared in the material and were not present in migration solutions. Linear oligomers HO–[LA]n–H were already present in the pellets/film and they migrated in a higher extension to aqueous food simulants (EtOH 10% and AcH 3%). However, linear oligomers CH3–CH2–O–[LA]n–H were not present initially in the pellets/film, but were detected in migration to simulants with ethanol content, EtOH 95% and EtOH 10%. Furthermore, 5 cyclic polyester oligomers were identified in migration. Ethanol 95% and ethanol 10% migration solutions were also analyzed by scanning electron microscopy (SEM), and the presence of microstructures that could be attributed to the oligomers migration was found. They could be seen as microplastics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Determination of volatile compounds and their sensory impact in a biopolymer based on polylactic acid (PLA) and polyester

  • Ubeda, S.
  • Aznar, M.
  • Nerín, C.
Polylactic acid (PLA) is one of the most commonly used biopolymers for manufacturing food packaging; its control is very important to ensure consumers’ health. In this work, a blend of PLA and polyester was studied and its volatile composition in the polymer and in the migration to food simulants was determined by gas chromatography–mass spectrometry (GC–MS) and atmospheric pressure gas chromatography–quadrupole-time of flight mass spectrometry (APGC–QTOF). The results showed that both techniques provided complementary information, to give complete information on the biopolymer''s composition. Some compounds such as lactide or cyclopentanone were detected only by GC–MS while others, such as the cyclic dimer [AA-BD] 2 (AA:adipic acid, BD:butanediol), were detected only by APGC–MS. In migration, lactide, AA-BD and [AA-BD] 2 were identified in ethanol 95%. A GC–olfactometry study was also carried out. Some compounds showed sensory impact on the polymer odor but not in migration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Determination of non-volatile components of a biodegradable food packaging material based on polyester and polylactic acid (PLA) and its migration to food simulants

  • Aznar, Margarita
  • Ubeda, Sara
  • Dreolin, Nicola
  • Nerín, Cristina
Bioplastic materials are increasingly used due to its benefits for the environment preservation. Among them, food packaging materials based on polylactic acid (PLA) are among the most employed. In this work, a sample treatment methodology based on dissolution/precipitation has been optimized, selecting finally dichloromethane/ethanol as solvent/antisolvent system. The extracts obtained were analysed by UPLC-MS(QTOF), that allowed the identification of the main PLA non-volatile components. The recovery results were between 100.9 to 114.0%. The methodology was applied to the analysis of pellets and films of a PLA-polyester blend sample. A total of 37 different compounds were detected, where the four compounds with the highest intensity in pellet samples were cyclic oligomers coming from the polyester part of the blend and composed by adipic acid (AA), phthalic acid (PA) and butanediol (BD). Migration experiments to 3 food simulants were also performed: ethanol 95% (v/v), ethanol 10% (v/v) and acetic acid 3% (w/v). The results showed that in addition to those compounds previously detected in the film, new compounds coming from the reaction of PLA components with food simulants were present in migration solutions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of an active label based on benzyl isothiocyanate on the morphology and ochratoxins production of Aspergillus ochraceus

  • Clemente, Isabel
  • Aznar, Margarita
  • Nerín, Cristina
The aim of this work was the study of the main effects of benzyl isothiocyanate (BITC) on A. ochraceus morphology and on its production metabolism of ochratoxins. This compound was evaluated as active agent of an antimicrobial label in food packaging. Microbiological studies showed a slowdown in mould growth when the active material was applied to A. ochraceus and the presence of three different areas of growth. Scanning electron microscopy was successfully used to demonstrate the mode of action of BITC on this strain. A. ochraceus exhibited modifications in morphology compared to the control samples such as the disappearance of sclerotia or cleistothecia An extraction protocol and an analytical method by UPLC-MS/MS to determine ochratoxins (OTs) was developed. The results showed that all these morphological changes were related to a decrease on OTs production, both ochratoxin A (OTA) and ochratoxin B (OTB). The presence of BITC caused a great decrease on OTA that modified the OTA/OTB ratio, increasing the OTB proportion. Furthermore, the active packaging also modified the production of other secondary metabolites. The morphological and metabolic effects observed, as well as the relationship between them, are of great interest since they have not been reported before for A. ochraceus.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development and validation of a LC–MS/MS method for the analysis of bisphenol a in polyethylene terephthalate

  • Dreolin, Nicola
  • Aznar, Margarita
  • Moret, Sabrina
  • Nerin, Cristina
Bisphenol A (BPA) is widely recognized being an endocrine disrupter and it is employed in many food packaging applications. Although it is not intended to take part in the manufacture of polyethylene terephthalate (PET) food grade, the presence of BPA in recycled PET should not be neglected. To satisfy the increasing need to ensure “BPA-free” articles, a liquid chromatography-tandem mass spectrometry method was developed. The crucial step in the sample preparation was the total dissolution/reprecipitation of the polymer. The repeatability of the method (RSD%, n = 6) was lower than 7.6%, while HorRat values ranged between 0.3 and 0.5. Limits of detection and quantitation were 1.0 and 3.3 ng g-1, respectively. Recovery ranged from 89 to 107%. The method was applied to 23 samples of virgin and recycled pellets, preforms and bottles. Migration tests were also carried out. Results shown significantly higher levels of BPA in recycled PET.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Overall and specific migration from multilayer high barrier food contact materials–kinetic study of cyclic polyester oligomers migration

  • Úbeda, S.
  • Aznar, M.
  • Vera, P.
  • Nerín, C.
  • Henríquez, L.
  • Taborda, L.
  • Restrepo, C.
Most multilayer high barrier materials used in food packaging have a polyurethane adhesive layer in their structures. In order to assess the safety of these materials, it is important to determine the compounds intentionally added to the adhesives (IAS) as well as those non-intentionally added substances (NIAS). During the manufacture of polyurethane adhesives, some by-products can be formed, such as cyclic polyester oligomers coming from the reaction between dicarboxylic acids and glycols. Since these compounds are not listed in the Regulation 10/2011/EU, they should not be found in migration above 0.01 mg/kg of simulant. In this study two flexible multilayer packaging materials were used and migration was evaluated in simulant A (ethanol 10% v/v), simulant B (acetic acid 3% w/v) and simulant ethanol 95% v/v during 10 days at 60ºC. Identification and quantification of non-volatile compounds was carried out by UPLC-MS-QTOF. Most of migrants were oligomers such as cyclic polyesters and caprolactam oligomers. Overall migration and specific migration of adipic acid-diethylene glycol and phthalic acid-diethylene glycol were monitored over time and analysed by UPLC-MS-TQ. In most cases, ethanol 95% v/v was the simulant with the highest concentration values. Overall migration kinetics followed a similar pattern than specific migration kinetics.