Pasar al contenido principal

DEVELOPMENT OF NANOPARTICLE ENHANCED FUNCTIONAL MATERIALS, AND GREEN METHODOLOGIES FROM SUSTAINABLE POLYMERIC AND BIORENEWABLE SOURCES

RYC-2014-16759

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of Density on Microwave Pyrolysis of Cellulose

  • Fan, J.
  • Shuttleworth, Peter S.
  • Gronnow, Mark
  • Breeden, S. W.
  • Clark, James H.
  • Macquarrie, Duncan J.
  • Budarin, Vitaliy L.
Herein we present the influence of sample density on the microwave induced pyrolysis of crystalline cellulose, with heating rate, biochar and bio-oil yields investigated. This Letter demonstrates that sample density is a fundamental parameter influencing microwave-assisted biomass pyrolysis, with a direct impact on heating rate, the speed of volatiles diffusion through the sample matrix and distribution of products. Of significant interest was that the maximum heating rate and bio-oil yield corresponded to an optimum sample density as a result of heat and mass transfer effects. Increase in density above this value stimulated a rise in biochar yield. The increased understanding of the mechanisms influenced by sample density in a microwave field gives increased ability for users to produce bio-oil or biochar, giving rise to improved microwave-based biorefineries for future energy and chemical needs., This work is financially supported by EPSRC for research grant no. EP/K014773/1, the Industrial Biotechnology Catalyst (Innovate UK, BBSRC, EPSRC) to support the translation, development and commercialization of innovative industrial Biotechnology processes (EP/N013522/1). P.S.S. also gratefully acknowledges the Spanish Ministry Economy and Competitivity (MINECO) for a Ramón y Cajal senior research fellowship (RYC-2014-16759) and a proyecto de I+D+I para jóvenes investigadores (MAT2014-59674-JIN), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adamantane-Based Micro- and Ultra-Microporous Frameworks for Efficient Small Gas and Toxic Organic Vapor Adsorption

  • Jiang, Wenzhao
  • Yue, Hangbo
  • Shuttleworth, Peter S.
  • Xie, Pengbo
  • Li, Shanji
  • Guo, Jianwei
Microporous organic polymers and related porous materials have been applied in a wide range of practical applications such as adsorption, catalysis, adsorption, and sensing fields. However, some limitations, like wide pore size distribution, may limit their further applications, especially for adsorption. Here, micro- and ultra-microporous frameworks (HBPBA-D and TBBPA-D) were designed and synthesized via Sonogashira–Hagihara coupling of six/eight-arm bromophenyl adamantane-based “knots” and alkynes-type “rod” monomers. The BET surface area and pore size distribution of these frameworks were in the region of 395–488 m2 g−1, 0.9–1.1 and 0.42 nm, respectively. The as-made prepared frameworks also showed good chemical ability and high thermal stability up to 350 ◦C, and at 800 ◦C only 30% mass loss was observed. Their adsorption capacities for small gas molecules such as CO2 and CH4 was 8.9–9.0 wt % and 1.43–1.63 wt % at 273 K/1 bar, and for the toxic organic vapors n-hexane and benzene, 104–172 mg g−1 and 144–272 mg g−1 at 298 K/0.8 bar, respectively. These are comparable to many porous polymers with higher BET specific surface areas or after functionalization. These properties make the resulting frameworks efficient absorbent alternatives for small gas or toxic vapor capture, especially in harsh environments., This research was funded by National Natural Science Foundation of China (Nos. 21476051, 21706039), Natural Science Foundation of Guangdong Province (No. 2017A030310300, 2016A030310349), Science and Technology Program of Guangzhou City (No. 201704030075), and an Innovation Team Project in Universities of Guangdong Province (No. 2017GKCXTD006). PSS also acknowledges the Spanish Ministry Economy and Competitivity (MINECO) for a Ramón y Cajal fellowship (RYC-2014-16759) and a Proyecto de Investigación en el Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia (MAT2017-88382-P)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrothermal base catalysed treatment of Kraft Lignin for the preparation of a sustainable carbon fibre precursor

  • Otromke, M.
  • Shuttleworth, Peter S.
  • Sauer, J.
  • White, R. J.
Industrial Kraft Lignin (KL) prepared by LignoBoost® technology was treated via hydrothermal base catalysed depolymerisation (HBCD). KL was dried and divided into methanol soluble and insoluble fractions. The insoluble fraction was treated in 1 M NaOH (aq) at 300 °C. After precipitation with HCl (aq), the solids yield was ca. 60 wt%. These solids demonstrated improved thermal stability and carbon content, increased solubility in MeOH and reduction in polydispersity. With a view to the use of the product in the preparation of carbon-based materials (e.g. carbon fibres (CF)), thermal analysis was undertaken, revealing a lack of a glass transition below the decomposition temperature, excluding melt pinning. However, a high solubility in organic solvents renders the product a suitable candidate for solvent spinning and for the production of renewable low-cost CFs. Additionally, the process generated an oily liquid phase with yields of ca. 10 wt% containing valuable catechol and methylated derivatives., RJW acknowledges financial support of the Fraunhofer Society and Fraunhofer Institute for Solar Energy Systems ISE through an “ATTRACT” award. PSS gratefully acknowledges the Spanish Ministry for Economy and Enterprise (MINECO) for a Ramón y Cajal fellowship (RYC-2014-16759) and a proyecto de I+D+I para jóvenes investigadores (MAT2014-59674-JIN). RJW and MO would also like to acknowledge the support of the joint Max Planck Society/Fraunhofer Society project “Dendrorefining”. Dr. H. Scherer (AK Krossing; University of Freiburg, Germany) is especially thanked for his assistance with NMR measurements. The authors would like to thank the ICTP-CSIC characterisation service for their help in measuring the DSCs of the samples. The Fraunhofer IAP (Potsdam, Germany) is thanked for assistance with GPC measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrothermal base catalysed treatment of Kraft lignin - time dependent analysis and a techno-economic evaluation for carbon fibre applications

  • Otromke, M.
  • Shuttleworth, Peter S.
  • Sauer, J.
  • White, R. J.
The hydrothermal base-catalysed treatment of industrial Kraft lignin (KL) is investigated as a basis for production of a sustainable carbon fibre precursor, with a focus on the time-dependent evolution and impact on precursor properties. Hydrothermal treatment was performed at T = 300 °C and p = 180 bar, with the retention time (t) varied between 8, 12, 16, 20, and 24 mins. Molecular weight distribution and thermal stability of the processed lignin were close to maximum after 8 min, and 12–16 min respectively. Chemical modification was found to continue (e.g. demethoxylation) over the entire t range (24 min). Analysis of the recovered oily phase indicated catechol derivatives were stable end-products with, e.g., vanillin and guaiacol as intermediates. A techno-economic analysis indicated a price of ca. 1600 €/t at a production capacity of 10 kt/a is achievable, with main cost-drivers being lignin (60%), fixed costs (20%), and energy (10%)., RJW acknowledges financial support of the Fraunhofer Society and Fraunhofer Institute for Solar Energy Systems ISE through an “ATTRACT” award. PSS gratefully acknowledges the Spanish Ministry for Economy and Enterprise (MINECO) for a Ramón y Cajal fellowship (RYC-2014-16759) and a proyecto de I+D+I para jóvenes investigadores (MAT2014-59674-JIN). RJW and MO would also like to acknowledge the support of the joint Max Planck Society/Fraunhofer Society project “Dendrorefining”. Dr. H. Scherer (AK Krossing; University of Freiburg, Germany) is thanked for his assistance with NMR measurements. The authors would like to thank the ICTP-CSIC characterisation service for their help in measuring the DSCs of the samples. The Fraunhofer IAP (Potsdam, Germany) is thanked for assistance with GPC measurement
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physically-crosslinked polyvinyl alcohol composite hydrogels containing clays, carbonaceous materials and magnetic nanoparticles as fillers

  • Sánchez, Laura M.
  • Shuttleworth, Peter S.
  • Waiman, C.
  • Zanini, G.
  • Álvarez, V. A.
  • Ollier, R. P.
Polyvinyl alcohol (PVA)/ Bentonite, acid-modified Bentonite, magnetic nanoparticles and mesoporous carbonaceous composite hydrogels were synthesized via an eco-friendly freeze-thawing technique, which is a simple and non-toxic crosslinking methodology. After thorough characterisation using X-Ray Diffraction (XRD), Scanning Electron microscopy (SEM), Dynamic Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA) and swelling assessment. Furthermore, the prepared materials were tested in order to explore their cadmium adsorption potential, a heavy metal usually found as a pollutant in water bodies. The data obtained showed that PVA has no affinity for cadmium ions but the incorporation of the different fillers makes the materials develop important adsorbent characteristics. Under the selected working conditions, and for a contact time of 1440 min, the maximum amount of cadmium ions adsorbed was 50.9 mg/g, 33.9 mg/g, 42.6 mg/g and 30.5 mg/g for composites containing bentonite; acid-modified bentonite; magnetic nanoparticles and carbonaceous materials, respectively. For all cases the higher the filler amounts the higher the adsorption efficiency., The authors acknowledge the financial support of CONICET, Universidad Nacional de Mar del Plata, ANPCyT and Fundación Bunge & Born. PSS also acknowledges financial support from the Spanish Ministry Economy and Competitivity (MINECO) for a Ramón y Cajal fellowship (RYC-2014-16759) and a Proyecto de Investigación en el Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia (MAT2017-88382-P).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DPD simulations and experimental study on reduction-sensitive polymeric micelles self-assembled from PCL-SS-PPEGMA for doxorubicin controlled release

  • Yang, Chufen
  • Yin, Li
  • Yuan, Cong
  • Liu, Wenyao
  • Guo, Jianwei
  • Shuttleworth, Peter S.
  • Yue, Hangbo
  • Lin, Wenjing
Delivery of anticancer drugs by amphiphilic polymeric micelles with disulfide bonds as the reduction-responsive groups has potential application in the field of drug-controlled release. In this study, three disulfide-linked polycaprolactone-b-polyethylene glycol methyl ether methacrylate (PCL-SS-PPEGMA) were synthesized and confirmed by 1H NMR and GPC, and then used for doxorubicin (DOX) delivery. The CMC values of the three PCL- SS-PPEGMA micelles were low (0.71–4.56 mg/L), indicative of the good stability of micelles in aqueous solution. The drug loading content (LC) and encapsulation efficiency (EE), together with the DOX accelerated release profiles were determined, with good drug loading capacity and well drug-controlled release performance. And to explore the mesoscopic behavior of reduction-responsive drug-loaded polymeric micelles, by using a dedicated disulfide bond-breaking model and script, dissipative particle dynamics (DPD) simulations were carried out on the three PCL-SS-PPEGMA polymers. Their self-assembled behavior, formation of DOX-loaded micelles, the di-sulfide bond-breaking process, as well as the DOX reduction-responsive release process were simulated and assessed. Comparing the DPD simulation results with the experimental data, we found that they were in good agreement, effectively demonstrating that the DPD simulation method developed can provide a practical mesoscopic approach for the reduction-responsive drug-loaded polymeric micelles that involved the cleavage of dynamic covalent bonds., The authors gratefully acknowledged the financial support from the National Natural Science Foundation of China (No. 21676058, 21706039 and 21808039) and the Natural Science Foundation of Guangdong Province (No. 2017A030310300 and 2018A030310525). P. S.S. acknowledges support from the Spanish Ministry of Economy, In-dustry, and Competitiveness (MINECO) through a Ramon y Cajal Fellowship (RYC-2014-16759), Peer reviewed