Pasar al contenido principal

SYSTEM OF MODELS FOR SPATIOTEMPORAL EXPLORATION OF JOINT DISEASES IN THE MUSCULOSKELETAL SYSTEM

RYC-2015-18888

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSITAT POMPEU FABRA CCT
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Image-based 3D characterization of abdominal aortic aneurysm deformation after endovascular aneurysm repair

  • López-Linares, Karen
  • García, Inmaculada
  • García, Ainhoa
  • Cortes, Camilo
  • Macía, Iván
  • González Ballester, Miguel Ángel, 1973-
An abdominal aortic aneurysm (AAA) is a focal dilation of the abdominal aorta, that if not treated, tends to grow and may rupture. The most common treatment for AAAs is the endovascular aneurysm repair (EVAR), which requires that patients undergo Computed Tomography Angiography (CTA)-based post-operative lifelong surveillance due to the possible appearance of complications. These complications may again lead to AAA dilation and rupture. However, there is a lack of advanced quantitative image-analysis tools to support the clinicians in the follow-up. Currently, the approach is to evaluate AAA diameter changes along time to infer the progress of the patient and the post-operative risk of AAA rupture. An increased AAA diameter is usually associated with a higher rupture risk, but there are some small AAAs that rupture, whereas other larger aneurysms remain stable. This means that the diameter-based rupture risk assessment is not suitable for all the cases, and there is increasing evidence that the biomechanical behavior of the AAA may provide additional valuable information regarding the progression of the disease and the risk of rupture. Hence, we propose a promising methodology for post-operative CTA time-series registration and subsequent aneurysm biomechanical strain analysis. From these strains, quantitative image-based descriptors are extracted using a principal component analysis of the tensile and compressive strain fields. Evaluated on 22 patients, our approach yields a mean area under the curve of 88.6% when correlating the strain-based quantitative descriptors with the long-term patient prognosis. This suggests that the strain information directly extracted from the CTA images is able to capture the biomechanical behavior of the aneurysm without relying on finite element modeling and simulation. Furthermore, the extracted descriptors set the basis for possible future imaging biomarkers that may be used in clinical practice. Apart from the diameter, these biomarkers may be used to assess patient prognosis and to enable informed decision making after an EVAR intervention, especially in difficult uncertain cases., This research was undertaken as part of the MEASURE-Análisis basado en iMagen de la Evolución de Aneurismas de aorta abdominal tratados mediante Reparación Endovascular project funded by the Basque Government. Funding from the Spanish Government (RYC-2015-18888) is also acknowledged.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Fragilidad relativa de fémures osteoporóticos evaluados con DXA y simulación de caídas con elementos finitos guiados por radiografías de urgencias, Relative fragility of osteoporotic femurs assessed with DXA and simulation of finite element falls guided by emergency X-rays

  • Ruiz Wills, Carlos
  • Tassani, Simone
  • Di Gregorio, Silvana
  • Martínez, Silvia
  • González Ballester, Miguel Ángel, 1973-
  • Humbert, Ludovic
  • Noailly, Jérôme
  • del Río Barquero, Luis Miguel
Objetivo: El diagnóstico de osteoporosis se ha fundamentado en la medición de la densidad mineral ósea, si bien esta variable tiene una capacidad limitada en la discriminación de pacientes con o sin fracturas. La aplicación del análisis de elementos finitos (FE) sobre imágenes volumétricas de tomografía computarizada ha mejorado la clasificación de sujetos hasta 90%, aunque la dosis de radiación, complejidad y coste no aconsejan su práctica regular. Nuestro objetivo es aplicar el análisis FE a modelos tridimensionales con absorciometría radiológica dual (3DDXA), para clasificar pacientes con fractura osteoporótica de fémur proximal y sin fractura. Material y métodos: Se selecciónó una cohorte de 111 pacientes con osteoporosis densitométrica: 62 con fractura y 49 sin ella. Se utilizaron modelos FE sujetoespecíficos para el impacto, como la simulación estática de la caída lateral. Las simulaciónes de impacto permiten identificar la región crítica en el 95% de los casos, y la respuesta mecánica a una fuerza lateral máxima. Se realizó un análisis mediante un clasificador discriminativo (Support Vector Machine) por tipo de fractura, tejido y género, utilizando las mediciónes DXA y parámetros biomecánicos. Resultados: Los resultados mostraron una sensibilidad de clasificación del 100%, y una tasa de falsos negativos de 0% para los casos de fractura de cuello para el hueso trabecular en las mujeres. Se identifica la variable tensión principal mayor (MPS) como el mejor parámetro para la clasificación. Conclusión: Los resultados sugieren que el uso de modelos 3DDXA podría ayudar a discriminar mejor a los pacientes con elevado riesgo de fracturarse., Objetive: The diagnosis of osteoporosis has been based on the measurement of bone mineral density, although this variable has a limited capacity in discriminating patients with or without fractures. The application of finite element analysis (FE) on computed tomography volumetric images has improved the classification of subjects by up to 90%, although the radiation dose, complexity, and cost do not favor their regular practice. Our objective is to apply FE analysis to threedimensional models with dualenergy xray absorptiometry (3DDXA), to classify patients who present osteoporotic fracture of the proximal femur and those without fracture. Material and methods: A cohort of 111 patients with densitometric osteoporosis was selected: 62 with fracture and 49 without it. Subjectspecific FE models for impact were used, such as static simulation of lateral fall. Impact simulations allow identifying the critical region in 95% of cases, and the mechanical response to maximum lateral force. An analysis was performed using a discriminative classifier (Support Vector Machine) by fracture type, tissue and gender, using DXA measurements and biomechanical parameters. Results: The results showed a classification sensitivity of 100%, and a false negative rate of 0% for cases of neck fracture for trabecular bone in women. The variable major main stress (MPS) is identified as the best parameter for the classification. Conclusion: The results suggest that using 3DDXA models help in order to better discriminate patients with raised fracture risk., Este estudio ha sido posible gracias al soporte a la investigación que ha supuesto la beca FEIOMM y ayuda financiera del MINECO (RYC-2015-18888).
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Theoretical explorations generate new hypotheses about the role of the cartilage endplate in early intervertebral disk degeneration

  • Ruiz Wills, Carlos
  • Foata, Baptiste
  • González Ballester, Miguel Ángel, 1973-
  • Karppinen, Jaro
  • Noailly, Jérôme
Altered cell nutrition in the intervertebral disk (IVD) is considered a main cause for disk degeneration (DD). The cartilage endplate (CEP) provides a major path for the diffusion of nutrients from the peripheral vasculature to the IVD nucleus pulposus (NP). In DD, sclerosis of the adjacent bony endplate is suggested to be responsible for decreased diffusion and disk cell nutrition. Yet, experimental evidence does not support this hypothesis. Hence, we evaluated how moderate CEP composition changes related to tissue degeneration can affect disk nutrition and cell viability. A novel composition-based permeability formulation was developed for the CEP, calibrated, validated, and used in a mechano-transport finite element IVD model. Fixed solute concentrations were applied at the outer surface of the annulus and the CEP, and three cycles of daily mechanical load were simulated. The CEP model indicated that CEP permeability increases with the degeneration/aging of the tissue, in accordance with recent measurements reported in the literature. Additionally, our results showed that CEP degeneration might be responsible for mechanical load-induced NP dehydration, which locally affects oxygen and lactate levels, and reduced glucose concentration by 16% in the NP-annulus transition zone. Remarkably, CEP degeneration was a condition sine-qua-non to provoke cell starvation and death, while simulating the effect of extracellular matrix depletion in DD. This theoretical study cast doubts about the paradigm that CEP calcification is needed to provoke cell starvation, and suggests an alternative path for DD whereby the early degradation of the CEP plays a key role., Funding was received from the European Commission (MySpine FP7-ICT-269909), and from the Spanish Ministry of Economy and Competitiveness (RYC-2015-18888, HOLOA-DPI2016-80283-C2-1-R and María de Maeztu Units of Excellence Program MDM-2015-0502). BF has collaborated to this work at IBEC with a studentship from the Erasmus mobility program.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Multiscale regulation of the intervertebral disc: achievements in experimental, in silico, and regenerative research

  • Baumgartner, Laura
  • Wuertz-Kozak, Karin
  • Le Maitre, Christine L.
  • Wignall, Francis
  • Richardson, Stephen M.
  • Hoyland, Judith
  • Ruiz Wills, Carlos
  • González Ballester, Miguel Ángel, 1973-
  • Neidlin, Michael
  • Alexopoulos, Leonidas G.
  • Noailly, Jérôme
Intervertebral disc (IVD) degeneration is a major risk factor of low back pain. It is defined by a progressive loss of the IVD structure and functionality, leading to severe impairments with restricted treatment options due to the highly demanding mechanical exposure of the IVD. Degenerative changes in the IVD usually increase with age but at an accelerated rate in some individuals. To understand the initiation and progression of this disease, it is crucial to identify key top-down and bottom-up regulations’ processes, across the cell, tissue, and organ levels, in health and disease. Owing to unremitting investigation of experimental research, the comprehension of detailed cell signaling pathways and their effect on matrix turnover significantly rose. Likewise, in silico research substantially contributed to a holistic understanding of spatiotemporal effects and complex, multifactorial interactions within the IVD. Together with important achievements in the research of biomaterials, manifold promising approaches for regenerative treatment options were presented over the last years. This review provides an integrative analysis of the current knowledge about (1) the multiscale function and regulation of the IVD in health and disease, (2) the possible regenerative strategies, and (3) the in silico models that shall eventually support the development of advanced therapies, M.N. acknowledges financial support from the German Research Foundation (DFG) via the scholarship “Forschungsstipendium” (PN: 387071423). L.G.A. acknowledges funding through the Operational Program Competitiveness, Entrepreneurship and Innovation, under the call RESEARCH–CREATE–INNOVATE co-financed by the European Union and Greek national funds (Project Code: T1EDK-02829). K.W. acknowledges funding from the Swiss National Science Foundation (SNF PP00P2_163678/1). L.B., C.R.W., M.A.G.B., and J.N. acknowledge financial support from the Spanish Ministry of Science and Innovation (HOLOA-DPI2016-80283-C2-1-R, RYC-2015-18888). L.B., C.L.M., C.R.W., L.G.A., M.A.G.B., and J.N. further acknowledge financial support from the European Commission (Disc4All-H2020-MSCA-ITN-ETN-2020 GA: 955735).
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Sensitivity analysis of in silico fluid simulations to predict thrombus formation after left atrial appendage occlusion

  • Mill, Jordi
  • Agudelo, Victor
  • Olivares Miyares, Andy Luis
  • Pons Vidal, Maria Isabel
  • Silva, Etelvino
  • Nuñez-Garcia, Marta
  • Morales Ferez, Xabier
  • Arzamendi, Dabit
  • Freixa, Xavier
  • Noailly, Jérôme
  • Camara, Oscar
Atrial fibrillation (AF) is nowadays the most common human arrhythmia and it is considered a marker of an increased risk of embolic stroke. It is known that 99% of AF-related thrombi are generated in the left atrial appendage (LAA), an anatomical structure located within the left atrium (LA). Left atrial appendage occlusion (LAAO) has become a good alternative for nonvalvular AF patients with contraindications to anticoagulants. However, there is a non-negligible number of device-related thrombus (DRT) events, created next to the device surface. In silico fluid simulations can be a powerful tool to better understand the relation between LA anatomy, haemodynamics, and the process of thrombus formation. Despite the increasing literature in LA fluid modelling, a consensus has not been reached yet in the community on the optimal modelling choices and boundary conditions for generating realistic simulations. In this line, we have performed a sensitivity analysis of several boundary conditions scenarios, varying inlet/outlet and LA wall movement configurations, using patient-specific imaging data of six LAAO patients (three of them with DRT at follow-up). Mesh and cardiac cycle convergence were also analysed. The boundary conditions scenario that better predicted DRT cases had echocardiography-based velocities at the mitral valve outlet, a generic pressure wave from an AF patient at the pulmonary vein inlets, and a dynamic mesh approach for LA wall deformation, emphasizing the need for patient-specific data for realistic simulations. The obtained promising results need to be further validated with larger cohorts, ideally with ground truth data, but they already offer unique insights on thrombogenic risk in the left atria., This work was supported by the Spanish Ministry of Science, Innovation and Universities under the Retos I+D Programme (RTI2018-101193-B-I00), the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502), the Spanish Ministry of Economy and Competitiveness under the Programme for the Formation of Doctors (PRE2018-084062), and MINECO (RYC-2015-18888). Additionally, this work was supported by the H2020 EU SimCardioTest project (Digital transformation in Health and Care SC1-DTH-06-2020; grant agreement No. 101016496).
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Trabecular fracture zone might not be the higher strain region of the trabecular framework

  • Tassani, Simone
  • Pani, Martino
  • Noailly, Jérôme
  • González Ballester, Miguel Ángel, 1973-
Trabecular bone fracture is a traumatic and localized event studied worldwide in order to predict it. During the years, researchers focused over the mechanical characterization of the trabecular tissue to understand its mechanics. Several studies pointed out the very local nature of the trabecular failure, finally identifying the fracture zone with the aim to study it separately. The complexity of the three-dimensional trabecular framework and the local nature of the fracture event do not allow the direct evaluation of a single trabecula’s behavior within its natural environment. For this reason, micro-Finite Element Modeling has been seen as the best way to investigate this biomechanical issue. Mechanical strain analysis is adopted in the literature for the identification of micro fracture using criteria based on principal strains. However, it was never verified if the fracture zone is actually the zone where principal strains are concentrated. Here, we show how the maximum strain of the tissue might not be directly correlated to the fracture. In the present work, a previously validated technique was used to identify the fracture zone of 10 trabecular specimen mechanically tested in compression and scanned in micro-CT before and after the mechanical test. Before-compression datasets were used to develop 10 micro-FE models were the same boundary conditions of the mechanical test were reproduced. Our results show how the known linear behavior of the trabecular framework might not be directly related to the development of the fracture suggesting other non-linear phenomenon, like buckling or microdamage, as actual cause of the traumatic event. This result might have several implications both in micro-modeling and in clinical applications for the study of fracture related pathology, like osteoporosis., The micro-CT datasets were produced by Laboratorio di Tecnologia Medica, Istituto Ortopedico Rizzoli, Bologna, Italy, with the financial support of the EU project LHDL (IST-2004-026932). This work was partially supported by the Spanish Government (project number RYC—2015-18888) and by Chair QUAES-UPF Computational Technologies for Healthcare.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Joint analysis of morphological parameters and in silico haemodynamics of the left atrial appendage for thrombogenic risk assessment

  • Pons Vidal, Maria Isabel
  • Mill, Jordi
  • Fernandez-Quilez, Álvaro
  • Olivares, Andy L.
  • Silva, Etelvino
  • De Potter, Tom
  • Camara, Oscar
Background. Atrial fibrillation (AF) is considered the most common human arrhythmia. In nonvalvular AF, around 99% of thrombi are formed in the left atrial appendage (LAA). Nevertheless, there is not a consensus in the community about the relevant factors to stratify the AF population according to thrombogenic risk. Objective. To demonstrate the need for combining left atrial morphological and haemodynamics indices to improve the thrombogenic risk assessment in nonvalvular AF patients. Methods. A cohort of 71 nonvalvular AF patients was analysed. Statistical analysis, regression models, and random forests were used to analyse the differences between morphological and haemodynamics parameters, extracted from computational simulations built on 3D rotational angiography images, between patients with and without transient ischemic attack (TIA) or cerebrovascular accident (CVA). Results. The analysis showed that models composed of both morphological and haemodynamic factors were better predictors of TIA/CVA compared with models based on either morphological or haemodynamic factors separately. Maximum ostium diameter, length of the centreline, blood flow velocity within the LAA, oscillatory shear index, and time average wall shear stress parameters were found to be key risk factors for TIA/CVA prediction. In addition, TIA/CVA patients presented more flow stagnation within the LAA. Conclusion. Thrombus formation in the LAA is the result of multiple factors. Analyses based only on morphological or haemodynamic parameters are not precise enough to predict such a phenomenon, as demonstrated in our results; a better patient stratification can be obtained by jointly analysing morphological and haemodynamic features., This work was supported by the Spanish Ministry of Science, Innovation and Universities under the Retos I+D Programme (RTI2018-101193-B-I00), the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502), the Spanish Ministry of Economy and Competitiveness under the Programme for the Formation of Doctors (PRE2018-084062), and MINECO (RYC-2015-18888).
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Evidence-based network modelling to simulate nucleus pulposus multicellular activity in different nutritional and pro-inflammatory environments

  • Baumgartner, Laura
  • Sadowska, Aleksandra
  • González Ballester, Miguel Ángel, 1973-
  • Wuertz-Kozak, Karin
  • Noailly, Jérôme
Initiation of intervertebral disc degeneration is thought to be biologically driven. This reflects a process, where biochemical and mechanical stimuli affect cell activity (CA) that compromise the tissue strength over time. Experimental research enhanced our understanding about the effect of such stimuli on different CA, such as protein synthesis or mRNA expression. However, it is still unclear how cells respond to their native environment that consists of a “cocktail” of different stimuli that might locally vary. This work presents an interdisciplinary approach of experimental and in silico research to approximate Nucleus Pulposus CA within multifactorial biochemical environments. Thereby, the biochemical key stimuli glucose, pH, and the proinflammatory cytokines TNF-α and IL1β were considered that were experimentally shown to critically affect CA. To this end, a Nucleus Pulposus multicellular system was modelled. It integrated experimental findings from in vitro studies of human or bovine Nucleus Pulposus cells, to relate the individual effects of targeted stimuli to alterations in CA. Unknown stimulus-CA relationships were obtained through own experimental 3D cultures of bovine Nucleus Pulposus cells in alginate beads. Translation of experimental findings into suitable parameters for network modelling approaches was achieved thanks to a new numerical approach to estimate the individual sensitivity of a CA to each stimulus type. Hence, the effect of each stimulus type on a specific CA was assessed and integrated to approximate a multifactorial stimulus environment. Tackled CA were the mRNA expressions of Aggrecan, Collagen types I & II, MMP3, and ADAMTS4. CA was assessed for four different proinflammatory cell states; non-inflamed and inflamed for IL1β, TNF-α or both IL1β&TNF-α. Inflamed cell clusters were eventually predicted in a multicellular 3D agent-based model. Experimental results showed that glucose had no significant impact on proinflammatory cytokine or ADAMTS4 mRNA expression, whereas TNF-α caused a significant catabolic shift in most explored CA. In silico results showed that the presented methodology to estimate the sensitivity of a CA to a stimulus type importantly improved qualitative model predictions. However, more stimuli and/or further experimental knowledge need to be integrated, especially regarding predictions about the possible progression of inflammatory environments under adverse nutritional conditions. Tackling the multicellular level is a new and promising approach to estimate manifold responses of intervertebral disc cells. Such a top-down high-level network modelling approach allows to obtain information about relevant stimulus environments for a specific CA and could be shown to be suitable to tackle complex biological systems, including different proinflammatory cell states. The development of this methodology required a close interaction with experimental research. Thereby, specific experimental needs were derived from systematic in silico approaches and obtained results were directly used to enhance model predictions, which reflects a novelty in this research field. Eventually, the presented methodology provides modelling solutions suitable for multiscale approaches to contribute to a better understanding about dynamics over multiple spatial scales. Future work should focus on an amplification of the stimulus environment by integrating more key relevant stimuli, such as mechanical loading parameters, in order to better approximate native physiological environments., In vitro experimental research was possible through the 2018 Mobility Award of the European Society of Biomechanics. Moreover, this work was supported by the Department of Information and Communication Technologies of the Universitat Pompeu Fabra, the Spanish Government (RYC- 2015-18888, HOLOA-DPI2016-80283-C2-1/2-R) and the European Commission (Disc4All-MSCA-2020-ITN-ETN 955735).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Trabecular fracture zone might not be the higher strain region of the trabecular framework

  • Tassani, Simone
  • Pani, Martino
  • Noailly, Jérôme
  • González Ballester, Miguel Ángel, 1973-
Trabecular bone fracture is a traumatic and localized event studied worldwide in order to predict it. During the years, researchers focused over the mechanical characterization of the trabecular tissue to understand its mechanics. Several studies pointed out the very local nature of the trabecular failure, finally identifying the fracture zone with the aim to study it separately. The complexity of the three-dimensional trabecular framework and the local nature of the fracture event do not allow the direct evaluation of a single trabecula’s behavior within its natural environment. For this reason, micro-Finite Element Modeling has been seen as the best way to investigate this biomechanical issue. Mechanical strain analysis is adopted in the literature for the identification of micro fracture using criteria based on principal strains. However, it was never verified if the fracture zone is actually the zone where principal strains are concentrated. Here, we show how the maximum strain of the tissue might not be directly correlated to the fracture. In the present work, a previously validated technique was used to identify the fracture zone of 10 trabecular specimen mechanically tested in compression and scanned in micro-CT before and after the mechanical test. Before-compression datasets were used to develop 10 micro-FE models were the same boundary conditions of the mechanical test were reproduced. Our results show how the known linear behavior of the trabecular framework might not be directly related to the development of the fracture suggesting other non-linear phenomenon, like buckling or microdamage, as actual cause of the traumatic event. This result might have several implications both in micro-modeling and in clinical applications for the study of fracture related pathology, like osteoporosis., The micro-CT datasets were produced by Laboratorio di Tecnologia Medica, Istituto Ortopedico Rizzoli, Bologna, Italy, with the financial support of the EU project LHDL (IST-2004-026932). This work was partially supported by the Spanish Government (project number RYC—2015-18888) and by Chair QUAES-UPF Computational Technologies for Healthcare.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fragilidad relativa de fémures osteoporóticos evaluados con DXA y simulación de caídas con elementos finitos guiados por radiografías de urgencias, Relative fragility of osteoporotic femurs assessed with DXA and simulation of finite element falls guided by emergency X-rays

  • Ruiz Wills, Carlos
  • Tassani, Simone
  • Di Gregorio, Silvana
  • Martínez, Silvia
  • González Ballester, Miguel Ángel, 1973-
  • Humbert, Ludovic
  • Noailly, Jérôme
  • del Río Barquero, Luis Miguel
Objetivo: El diagnóstico de osteoporosis se ha fundamentado en la medición de la densidad mineral ósea, si bien esta variable tiene una capacidad limitada en la discriminación de pacientes con o sin fracturas. La aplicación del análisis de elementos finitos (FE) sobre imágenes volumétricas de tomografía computarizada ha mejorado la clasificación de sujetos hasta 90%, aunque la dosis de radiación, complejidad y coste no aconsejan su práctica regular. Nuestro objetivo es aplicar el análisis FE a modelos tridimensionales con absorciometría radiológica dual (3DDXA), para clasificar pacientes con fractura osteoporótica de fémur proximal y sin fractura. Material y métodos: Se selecciónó una cohorte de 111 pacientes con osteoporosis densitométrica: 62 con fractura y 49 sin ella. Se utilizaron modelos FE sujetoespecíficos para el impacto, como la simulación estática de la caída lateral. Las simulaciónes de impacto permiten identificar la región crítica en el 95% de los casos, y la respuesta mecánica a una fuerza lateral máxima. Se realizó un análisis mediante un clasificador discriminativo (Support Vector Machine) por tipo de fractura, tejido y género, utilizando las mediciónes DXA y parámetros biomecánicos. Resultados: Los resultados mostraron una sensibilidad de clasificación del 100%, y una tasa de falsos negativos de 0% para los casos de fractura de cuello para el hueso trabecular en las mujeres. Se identifica la variable tensión principal mayor (MPS) como el mejor parámetro para la clasificación. Conclusión: Los resultados sugieren que el uso de modelos 3DDXA podría ayudar a discriminar mejor a los pacientes con elevado riesgo de fracturarse., Objetive: The diagnosis of osteoporosis has been based on the measurement of bone mineral density, although this variable has a limited capacity in discriminating patients with or without fractures. The application of finite element analysis (FE) on computed tomography volumetric images has improved the classification of subjects by up to 90%, although the radiation dose, complexity, and cost do not favor their regular practice. Our objective is to apply FE analysis to threedimensional models with dualenergy xray absorptiometry (3DDXA), to classify patients who present osteoporotic fracture of the proximal femur and those without fracture. Material and methods: A cohort of 111 patients with densitometric osteoporosis was selected: 62 with fracture and 49 without it. Subjectspecific FE models for impact were used, such as static simulation of lateral fall. Impact simulations allow identifying the critical region in 95% of cases, and the mechanical response to maximum lateral force. An analysis was performed using a discriminative classifier (Support Vector Machine) by fracture type, tissue and gender, using DXA measurements and biomechanical parameters. Results: The results showed a classification sensitivity of 100%, and a false negative rate of 0% for cases of neck fracture for trabecular bone in women. The variable major main stress (MPS) is identified as the best parameter for the classification. Conclusion: The results suggest that using 3DDXA models help in order to better discriminate patients with raised fracture risk., Este estudio ha sido posible gracias al soporte a la investigación que ha supuesto la beca FEIOMM y ayuda financiera del MINECO (RYC-2015-18888).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sensitivity analysis of in silico fluid simulations to predict thrombus formation after left atrial appendage occlusion

  • Mill, Jordi
  • Agudelo, Victor
  • Olivares Miyares, Andy Luis
  • Pons Vidal, Maria Isabel
  • Silva, Etelvino
  • Nuñez-Garcia, Marta
  • Morales Ferez, Xabier
  • Arzamendi, Dabit
  • Freixa, Xavier
  • Noailly, Jérôme
  • Camara, Oscar
Atrial fibrillation (AF) is nowadays the most common human arrhythmia and it is considered a marker of an increased risk of embolic stroke. It is known that 99% of AF-related thrombi are generated in the left atrial appendage (LAA), an anatomical structure located within the left atrium (LA). Left atrial appendage occlusion (LAAO) has become a good alternative for nonvalvular AF patients with contraindications to anticoagulants. However, there is a non-negligible number of device-related thrombus (DRT) events, created next to the device surface. In silico fluid simulations can be a powerful tool to better understand the relation between LA anatomy, haemodynamics, and the process of thrombus formation. Despite the increasing literature in LA fluid modelling, a consensus has not been reached yet in the community on the optimal modelling choices and boundary conditions for generating realistic simulations. In this line, we have performed a sensitivity analysis of several boundary conditions scenarios, varying inlet/outlet and LA wall movement configurations, using patient-specific imaging data of six LAAO patients (three of them with DRT at follow-up). Mesh and cardiac cycle convergence were also analysed. The boundary conditions scenario that better predicted DRT cases had echocardiography-based velocities at the mitral valve outlet, a generic pressure wave from an AF patient at the pulmonary vein inlets, and a dynamic mesh approach for LA wall deformation, emphasizing the need for patient-specific data for realistic simulations. The obtained promising results need to be further validated with larger cohorts, ideally with ground truth data, but they already offer unique insights on thrombogenic risk in the left atria., This work was supported by the Spanish Ministry of Science, Innovation and Universities under the Retos I+D Programme (RTI2018-101193-B-I00), the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502), the Spanish Ministry of Economy and Competitiveness under the Programme for the Formation of Doctors (PRE2018-084062), and MINECO (RYC-2015-18888). Additionally, this work was supported by the H2020 EU SimCardioTest project (Digital transformation in Health and Care SC1-DTH-06-2020; grant agreement No. 101016496).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multiscale regulation of the intervertebral disc: achievements in experimental, in silico, and regenerative research

  • Baumgartner, Laura
  • Wuertz-Kozak, Karin
  • Le Maitre, Christine L.
  • Wignall, Francis
  • Richardson, Stephen M.
  • Hoyland, Judith
  • Ruiz Wills, Carlos
  • González Ballester, Miguel Ángel, 1973-
  • Neidlin, Michael
  • Alexopoulos, Leonidas G.
  • Noailly, Jérôme
Intervertebral disc (IVD) degeneration is a major risk factor of low back pain. It is defined by a progressive loss of the IVD structure and functionality, leading to severe impairments with restricted treatment options due to the highly demanding mechanical exposure of the IVD. Degenerative changes in the IVD usually increase with age but at an accelerated rate in some individuals. To understand the initiation and progression of this disease, it is crucial to identify key top-down and bottom-up regulations’ processes, across the cell, tissue, and organ levels, in health and disease. Owing to unremitting investigation of experimental research, the comprehension of detailed cell signaling pathways and their effect on matrix turnover significantly rose. Likewise, in silico research substantially contributed to a holistic understanding of spatiotemporal effects and complex, multifactorial interactions within the IVD. Together with important achievements in the research of biomaterials, manifold promising approaches for regenerative treatment options were presented over the last years. This review provides an integrative analysis of the current knowledge about (1) the multiscale function and regulation of the IVD in health and disease, (2) the possible regenerative strategies, and (3) the in silico models that shall eventually support the development of advanced therapies, M.N. acknowledges financial support from the German Research Foundation (DFG) via the scholarship “Forschungsstipendium” (PN: 387071423). L.G.A. acknowledges funding through the Operational Program Competitiveness, Entrepreneurship and Innovation, under the call RESEARCH–CREATE–INNOVATE co-financed by the European Union and Greek national funds (Project Code: T1EDK-02829). K.W. acknowledges funding from the Swiss National Science Foundation (SNF PP00P2_163678/1). L.B., C.R.W., M.A.G.B., and J.N. acknowledge financial support from the Spanish Ministry of Science and Innovation (HOLOA-DPI2016-80283-C2-1-R, RYC-2015-18888). L.B., C.L.M., C.R.W., L.G.A., M.A.G.B., and J.N. further acknowledge financial support from the European Commission (Disc4All-H2020-MSCA-ITN-ETN-2020 GA: 955735).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Theoretical explorations generate new hypotheses about the role of the cartilage endplate in early intervertebral disk degeneration

  • Ruiz Wills, Carlos
  • Foata, Baptiste
  • González Ballester, Miguel Ángel, 1973-
  • Karppinen, Jaro
  • Noailly, Jérôme
Altered cell nutrition in the intervertebral disk (IVD) is considered a main cause for disk degeneration (DD). The cartilage endplate (CEP) provides a major path for the diffusion of nutrients from the peripheral vasculature to the IVD nucleus pulposus (NP). In DD, sclerosis of the adjacent bony endplate is suggested to be responsible for decreased diffusion and disk cell nutrition. Yet, experimental evidence does not support this hypothesis. Hence, we evaluated how moderate CEP composition changes related to tissue degeneration can affect disk nutrition and cell viability. A novel composition-based permeability formulation was developed for the CEP, calibrated, validated, and used in a mechano-transport finite element IVD model. Fixed solute concentrations were applied at the outer surface of the annulus and the CEP, and three cycles of daily mechanical load were simulated. The CEP model indicated that CEP permeability increases with the degeneration/aging of the tissue, in accordance with recent measurements reported in the literature. Additionally, our results showed that CEP degeneration might be responsible for mechanical load-induced NP dehydration, which locally affects oxygen and lactate levels, and reduced glucose concentration by 16% in the NP-annulus transition zone. Remarkably, CEP degeneration was a condition sine-qua-non to provoke cell starvation and death, while simulating the effect of extracellular matrix depletion in DD. This theoretical study cast doubts about the paradigm that CEP calcification is needed to provoke cell starvation, and suggests an alternative path for DD whereby the early degradation of the CEP plays a key role., Funding was received from the European Commission (MySpine FP7-ICT-269909), and from the Spanish Ministry of Economy and Competitiveness (RYC-2015-18888, HOLOA-DPI2016-80283-C2-1-R and María de Maeztu Units of Excellence Program MDM-2015-0502). BF has collaborated to this work at IBEC with a studentship from the Erasmus mobility program.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Image-based 3D characterization of abdominal aortic aneurysm deformation after endovascular aneurysm repair

  • López-Linares, Karen
  • García, Inmaculada
  • García, Ainhoa
  • Cortes, Camilo
  • Macía, Iván
  • González Ballester, Miguel Ángel, 1973-
An abdominal aortic aneurysm (AAA) is a focal dilation of the abdominal aorta, that if not treated, tends to grow and may rupture. The most common treatment for AAAs is the endovascular aneurysm repair (EVAR), which requires that patients undergo Computed Tomography Angiography (CTA)-based post-operative lifelong surveillance due to the possible appearance of complications. These complications may again lead to AAA dilation and rupture. However, there is a lack of advanced quantitative image-analysis tools to support the clinicians in the follow-up. Currently, the approach is to evaluate AAA diameter changes along time to infer the progress of the patient and the post-operative risk of AAA rupture. An increased AAA diameter is usually associated with a higher rupture risk, but there are some small AAAs that rupture, whereas other larger aneurysms remain stable. This means that the diameter-based rupture risk assessment is not suitable for all the cases, and there is increasing evidence that the biomechanical behavior of the AAA may provide additional valuable information regarding the progression of the disease and the risk of rupture. Hence, we propose a promising methodology for post-operative CTA time-series registration and subsequent aneurysm biomechanical strain analysis. From these strains, quantitative image-based descriptors are extracted using a principal component analysis of the tensile and compressive strain fields. Evaluated on 22 patients, our approach yields a mean area under the curve of 88.6% when correlating the strain-based quantitative descriptors with the long-term patient prognosis. This suggests that the strain information directly extracted from the CTA images is able to capture the biomechanical behavior of the aneurysm without relying on finite element modeling and simulation. Furthermore, the extracted descriptors set the basis for possible future imaging biomarkers that may be used in clinical practice. Apart from the diameter, these biomarkers may be used to assess patient prognosis and to enable informed decision making after an EVAR intervention, especially in difficult uncertain cases., This research was undertaken as part of the MEASURE-Análisis basado en iMagen de la Evolución de Aneurismas de aorta abdominal tratados mediante Reparación Endovascular project funded by the Basque Government. Funding from the Spanish Government (RYC-2015-18888) is also acknowledged.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evidence-based network modelling to simulate nucleus pulposus multicellular activity in different nutritional and pro-inflammatory environments

  • Baumgartner, Laura
  • Sadowska, Aleksandra
  • González Ballester, Miguel Ángel, 1973-
  • Wuertz-Kozak, Karin
  • Noailly, Jérôme
Initiation of intervertebral disc degeneration is thought to be biologically driven. This reflects a process, where biochemical and mechanical stimuli affect cell activity (CA) that compromise the tissue strength over time. Experimental research enhanced our understanding about the effect of such stimuli on different CA, such as protein synthesis or mRNA expression. However, it is still unclear how cells respond to their native environment that consists of a “cocktail” of different stimuli that might locally vary. This work presents an interdisciplinary approach of experimental and in silico research to approximate Nucleus Pulposus CA within multifactorial biochemical environments. Thereby, the biochemical key stimuli glucose, pH, and the proinflammatory cytokines TNF-α and IL1β were considered that were experimentally shown to critically affect CA. To this end, a Nucleus Pulposus multicellular system was modelled. It integrated experimental findings from in vitro studies of human or bovine Nucleus Pulposus cells, to relate the individual effects of targeted stimuli to alterations in CA. Unknown stimulus-CA relationships were obtained through own experimental 3D cultures of bovine Nucleus Pulposus cells in alginate beads. Translation of experimental findings into suitable parameters for network modelling approaches was achieved thanks to a new numerical approach to estimate the individual sensitivity of a CA to each stimulus type. Hence, the effect of each stimulus type on a specific CA was assessed and integrated to approximate a multifactorial stimulus environment. Tackled CA were the mRNA expressions of Aggrecan, Collagen types I & II, MMP3, and ADAMTS4. CA was assessed for four different proinflammatory cell states; non-inflamed and inflamed for IL1β, TNF-α or both IL1β&TNF-α. Inflamed cell clusters were eventually predicted in a multicellular 3D agent-based model. Experimental results showed that glucose had no significant impact on proinflammatory cytokine or ADAMTS4 mRNA expression, whereas TNF-α caused a significant catabolic shift in most explored CA. In silico results showed that the presented methodology to estimate the sensitivity of a CA to a stimulus type importantly improved qualitative model predictions. However, more stimuli and/or further experimental knowledge need to be integrated, especially regarding predictions about the possible progression of inflammatory environments under adverse nutritional conditions. Tackling the multicellular level is a new and promising approach to estimate manifold responses of intervertebral disc cells. Such a top-down high-level network modelling approach allows to obtain information about relevant stimulus environments for a specific CA and could be shown to be suitable to tackle complex biological systems, including different proinflammatory cell states. The development of this methodology required a close interaction with experimental research. Thereby, specific experimental needs were derived from systematic in silico approaches and obtained results were directly used to enhance model predictions, which reflects a novelty in this research field. Eventually, the presented methodology provides modelling solutions suitable for multiscale approaches to contribute to a better understanding about dynamics over multiple spatial scales. Future work should focus on an amplification of the stimulus environment by integrating more key relevant stimuli, such as mechanical loading parameters, in order to better approximate native physiological environments., In vitro experimental research was possible through the 2018 Mobility Award of the European Society of Biomechanics. Moreover, this work was supported by the Department of Information and Communication Technologies of the Universitat Pompeu Fabra, the Spanish Government (RYC- 2015-18888, HOLOA-DPI2016-80283-C2-1/2-R) and the European Commission (Disc4All-MSCA-2020-ITN-ETN 955735).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Joint analysis of morphological parameters and in silico haemodynamics of the left atrial appendage for thrombogenic risk assessment

  • Pons Vidal, Maria Isabel
  • Mill, Jordi
  • Fernandez-Quilez, Álvaro
  • Olivares, Andy L.
  • Silva, Etelvino
  • De Potter, Tom
  • Camara, Oscar
Background. Atrial fibrillation (AF) is considered the most common human arrhythmia. In nonvalvular AF, around 99% of thrombi are formed in the left atrial appendage (LAA). Nevertheless, there is not a consensus in the community about the relevant factors to stratify the AF population according to thrombogenic risk. Objective. To demonstrate the need for combining left atrial morphological and haemodynamics indices to improve the thrombogenic risk assessment in nonvalvular AF patients. Methods. A cohort of 71 nonvalvular AF patients was analysed. Statistical analysis, regression models, and random forests were used to analyse the differences between morphological and haemodynamics parameters, extracted from computational simulations built on 3D rotational angiography images, between patients with and without transient ischemic attack (TIA) or cerebrovascular accident (CVA). Results. The analysis showed that models composed of both morphological and haemodynamic factors were better predictors of TIA/CVA compared with models based on either morphological or haemodynamic factors separately. Maximum ostium diameter, length of the centreline, blood flow velocity within the LAA, oscillatory shear index, and time average wall shear stress parameters were found to be key risk factors for TIA/CVA prediction. In addition, TIA/CVA patients presented more flow stagnation within the LAA. Conclusion. Thrombus formation in the LAA is the result of multiple factors. Analyses based only on morphological or haemodynamic parameters are not precise enough to predict such a phenomenon, as demonstrated in our results; a better patient stratification can be obtained by jointly analysing morphological and haemodynamic features., This work was supported by the Spanish Ministry of Science, Innovation and Universities under the Retos I+D Programme (RTI2018-101193-B-I00), the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502), the Spanish Ministry of Economy and Competitiveness under the Programme for the Formation of Doctors (PRE2018-084062), and MINECO (RYC-2015-18888).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sensitivity analysis of in silico fluid simulations to predict thrombus formation after left atrial appendage occlusion

  • Mill, Jordi|||0000-0003-0087-7489
  • Agudelo Montañez, Victor Hugo
  • Olivares, Andy Luis|||0000-0002-7284-0696
  • Pons, Maria Isabel
  • Silva, Etelvino
  • Nuñez-Garcia, Marta|||0000-0001-9349-3059
  • Morales Ferez, Xabier|||0000-0003-1349-2457
  • Arzamendi, Dabit|||0000-0001-7543-5867
  • Freixa, Xavier|||0000-0002-3203-9060
  • Noailly, Jérôme
  • Camara, Oscar|||0000-0002-5125-6132
Atrial fibrillation (AF) is nowadays the most common human arrhythmia and it is consid-ered a marker of an increased risk of embolic stroke. It is known that 99% of AF-related thrombi are generated in the left atrial appendage (LAA), an anatomical structure located within the left atrium (LA). Left atrial appendage occlusion (LAAO) has become a good alternative for nonvalvular AF patients with contraindications to anticoagulants. However, there is a non-negligible number of device-related thrombus (DRT) events, created next to the device surface. In silico fluid simulations can be a powerful tool to better understand the relation between LA anatomy, haemodynamics, and the process of thrombus formation. Despite the increasing literature in LA fluid modelling, a consensus has not been reached yet in the community on the optimal modelling choices and boundary conditions for generating realistic simulations. In this line, we have performed a sensitivity analysis of several boundary conditions scenarios, varying inlet/outlet and LA wall movement configurations, using patient-specific imaging data of six LAAO patients (three of them with DRT at follow-up). Mesh and cardiac cycle convergence were also analysed. The boundary conditions scenario that better predicted DRT cases had echocardiography-based velocities at the mitral valve outlet, a generic pressure wave from an AF patient at the pulmonary vein inlets, and a dynamic mesh approach for LA wall deformation, emphasizing the need for patient-specific data for realistic simulations. The obtained promising results need to be further validated with larger cohorts, ideally with ground truth data, but they already offer unique insights on thrombogenic risk in the left atria.