Pasar al contenido principal

Development of advanced energy conversion processes with reduced carbon footprint

RYC2019-026929-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Producción de metano puro a partir de H2/CO2 mediante un proceso de metanación asistida con adsorción de H2O

  • Gómez Alonso, Laura
  • Martínez Berges, Isabel
  • Navarro López, María Victoria
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
1 figura y 1 tabla.-- Póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis - SECAT 2021, celebrada en Valencia, del 18 al 20 de octubre 2021., Uno de los principales inconvenientes del uso de combustibles fósiles para la obtención de energía es la emisión de CO2 a la atmósfera. Para combatir los efectos negativos de dichas emisiones, se están desarrollando nuevas tecnologías de producción de biocombustibles a partir de residuos o biomasa que ayudarían a descarbonizar el sistema energético actual. La producción de CH4 presenta grandes ventajas en lo que respecta a su uso y almacenamiento ya que puede sustituir directamente al gas natural, mientras que puede ser almacenado sin ninguna restricción en la red de transporte de gas. Una alternativa poco explorada para aumentar la eficiencia del proceso de metanación convencional (CO2+ 4H2↔CH4+2H2O) es el proceso de metanación asistida o mejorada (SEM), en el que se propone llevar a cabo la metanación en presencia de un material adsorbente que retira el H2O generada en la reacción desplazando el equilibrio hacia la formación de CH4. De esta forma, se conseguirían mayores conversiones a CH4 operando en condiciones menos exigentes de presión y temperatura. El objetivo de este trabajo fue demostrar el potencial del proceso SEM para una mezcla H2/CO2 utilizando un catalizador comercial de Rodio y una zeolita 5A como adsorbente de H2O., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación, la Agencia de Investigación del Estado y los Fondos FEDER a través del proyecto WASYNG (No. RTI2018-095575-BI00, MCI/AEI/FEDER, UE) y por la Diputación General de Aragón (DGA) a través del proyecto INV01B2 de los proyectos I+D centrados en las líneas RIS3. Laura Gómez agradece a la DGA por la beca predoctoral recibida. Isabel Martínez agradece también al Ministerio de Ciencia e Innovación su contrato Ramón y Cajal (RYC2019-026929-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sorption-enhanced gasification (SEG) of agroforestry residues: Influence of feedstock and main operating variables on product gas quality

  • Martínez Berges, Isabel
  • Callén Romero, M. Soledad
  • Grasa Adiego, Gemma
  • López Sebastián, José Manuel
  • Murillo Villuendas, Ramón
8 figures, 5 tables., Sorption-enhanced gasification (SEG) is a promising route for the conversion of biomass into synthetic fuels. There are important aspects regarding syngas quality (e.g. tar composition and/or gaseous contaminants such as H2S) that may influence the scaling-up of the process and should be assessed. Experiments were performed in a 30 kWth bubbling fluidised gasifier to evaluate the effect of the feedstock used, temperature, sorbent-to-biomass (S/B) ratio and/or steam excess on such quality aspects. Larger amounts of tars were found for straw, which corresponded to highly stable tars (benzene, toluene, naphthalene and phenanthrene). Temperature, S/B ratio and steam excess favoured tar decomposition, causing the contribution of PAHs to total tar to increase. PAHs and phenol contents were found to be related to and dependant on the temperature and S/B ratio. Elutriated CaO particles reacted with the H2S formed until equilibrium conditions were reached, leading to syngas H2S contents of between 15 and 85 ppm. Sulphur in the syngas represented no more than 15% of the total sulphur introduced into the reactor, whereas 65–85% ended up as CaS with the partially converted sorbent particles leaving the reactor., Authors acknowledge the financial support given by the Spanish Ministry of Science and Innovation, the State Research Agency and the European Funds for Regional Development (No. RTI2018-095575-B-I00, MCI/AEI/FEDER, UE), as well as the Regional Aragon Government (DGA) under the research groups' support programme and the research project LMP178_18. Isabel Martínez thanks also the Spanish Ministry of Science and Innovation for her Ramón y Cajal contract (RYC2019-026929-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selection and optimisation of a zeolite/catalyst mixture for sorption-enhanced CO2 methanation (SEM) process

  • Gómez Alonso, Laura
  • Martínez Berges, Isabel
  • Navarro López, María Victoria
  • Murillo Villuendas, Ramón
10 figures, 8 tables., The sorption-enhanced methanation (SEM) process has emerged as a promising technology to produce high quality synthetic natural gas (SNG) from renewable sources under milder conditions than conventional methanation technologies. During the SEM process developed in this paper, an H2O adsorbent is combined with a Rhodium-based catalyst to remove the H2O generated during the CO2 methanation reaction, shifting the equilibrium towards CH4 formation. In this work, several commercial zeolites (3A, 4A, 5A and 13X) were studied as H2O adsorbents under SEM conditions. Based on the study performed, zeolite 4A demonstrated to be the most suitable zeolite which, combined with the proposed catalyst, allowed maximising the production and purity of the obtained CH4. The influence of gas space velocity, H2/CO2 ratio in the feed gas, zeolite/catalyst proportion and cyclic stability were analysed and optimized to maximise CH4 production. When the process was run under SEM conditions using zeolite 4A as sorbent at 275 °C and a gas space velocity of 230 Nml/h·gcat, the CH4 content increased from 10.6 vol% in conventional methanation up to 85 vol% in the SEM conditions. Thus, the enhanced performance of the SEM process was demonstrated, Authors acknowledge the grant PID2021–123878OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by "ERDF A way of making Europe. Authors thanks also the Regional Government of Aragon (DGA) under the research groups programme. Laura Gómez thanks the DGA for her pre-doctoral fellowship. Isabel Martínez thanks the grant RYC2019-026929-I funded by MCIN/AEI/10.13039/501100011033 and "ESF Investing in your future"., Peer reviewed