Pasar al contenido principal

Development of microalgae-based processes to increase the sustainability of the food industry

RYC2021-031061-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALMERIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Production of techno-functional proteins and plant biostimulants from Nannochloropsis gaditana

  • Valero-Vizcaino, Alicia
  • Villaró-Cos, Silvia
  • Morillas-España, Ainoa
  • Cerdá-Moreno, Cristina
  • Lafarga, Tomás
[EN] Nannochloropsis gaditana is produced mainly for its lipid content and fatty acid profile. However, its protein content is comparable to or even higher than that of most conventional protein sources. In this work, the microalga N. gaditana BEA 1202B purchased from the Spanish Bank of Algae (BEA) was produced using 3.4 m 3 tubular photobioreactors achieving a biomass productivity of 0.1 g L - 1 & sdot; day - 1 and a protein content of 29.2 +/- 4.5 % (d.w.). The biomass produced was used as a source of proteins; the protein recovery was optimised following a response surface methodology. Under optimal conditions, which were solubilisation at pH = 10.2 and precipitation at pH = 3.1, the protein recovery yield was 17.5 g & sdot; 100 g -1 . The extract exhibited a water -holding and an oil -holding capacity of 2.1 and 3.0 g g -1 , respectively. The leftovers from protein extraction were assessed as plant biostimulants and demonstrated a positive effect on root development, weight gain, and chlorophyll retention. The process described in this work presents a sustainable and environmentally friendly approach to harness the potential of the microalga N. gaditana in producing high -value food proteins and plant biostimulants. The integration of this microalgal-based biorefinery concept could contribute to more sustainable agriculture and address the growing global demand for protein -rich products and plant promoters., This work forms part of the CLEAN.AIR (TED2021-131511A-I00) and SOLAR center dot FOODS (PID2022-136292OB-I00) projects, both funded by the Spanish Ministry of Science and Innovation-MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. This work was also funded by the BLUE center dot FUTURE (PCM_00083) project, funded by the Regional Government of Andalusia and the European Union's NextGenerationEU/PRTR. Tomas Lafarga would like to thank PPIT-UAL, Junta de Andalucia-FEDER 2021-2027, and the Ramon y Cajal Programme (RYC2021-031061-I) funded by MCIN/AEI/10.13039/501100011033 and European Union's NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High Added Value Products from Agroindustrial Residues: Study on Microfibrillated Cellulose for Food Applications

  • Aguiló-Aguayo, I.
  • Albaladejo, P.
  • Gallur, M.
  • Abadias, M.
  • Ortiz, J.
  • Viñas, I.
  • Lafarga, T.
[EN] Waste composition range from simple sugars to complex polysaccharides such as starch, cellulose, and hemicellulose, including more complex sources such as lignin, lipids, and proteins. This composition suggests its use as raw materials that can potentially be valued by different techniques and used as resources for new food additives, leading to economic and environmental benefits. In this work, the extraction and production of microfibrillated cellulose (MFC) as the way forward to valorise agroindustrial residues. The high surface area and aspect ratio, rheological behaviour, water absorption and absence of cytotoxic and genotoxic properties of MFC studied in the present study facilitate its use in food applications as stabilizing and texturizer agent. This work has two main goals: The first goal is the production of MFC using a method based on the combination of green chemical and mechanical pre-treatment of the feedstock followed by a disintegration process of the cellulose obtained from agroindustrial residues. The results revealed that the different MFC obtained have a quality comparable with commercial MFC, which is reported by the determination of the Quality Index (QI). QI values between 50 and 63 are obtained with the agroindustrial subproducts tested. The MFC was also characterized using several techniques such as FTIR, SEM and TGA. The second goal is the MFC validation as thickener agent in food (mayonnaise, peach nectar, strawberry syrup and puree apple). First, a rheological study was carried out to observe the MFC thixotropic behaviour. Second, to evaluate techno-functional properties in-vivo, MFC was compared in terms of functionality with the seven additives commonly used in the industry: tare gum, xanthan gum, guar gum, carrageenan, pectin, agar and gelatine. The results revealed that the sample with 0.1% MFC exhibited a reduced thixotropic behavior compared to the other samples (1, 1.5 and 2%). Compared with commercial gums, MFC exhibits the highest water activity (0.87 +/- 0.00) and the most alkaline pH value (10.10 +/- 0.01). In the in vivo dietary models, thermal stabilization values after 15 min at 85 degrees C indicate that gums perform better than MFC and carrageenan in mayonnaise stabilization. This study also reveals that gums are more effective in stabilizing the cloud, while gelatine or MFC-containing samples exhibit a higher cloud volume after 30 min of stabilization. Notably, the cloud suspension of peach nectar with MFC-containing samples compares favorably to the control without gums (20 to 40%). This comprehensive study underscores the potential of MFC as a versatile and eco-friendly alternative in food applications, aligning with the broader goals of sustainable waste management and environmentally conscious practices in the agroindustrial sector., The authors would like to thank the AGRIMAX and AGROMATTER project for funding the research. AGRIMAX is funded by the Bio Based Industries Joint Undertaking under the European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 720719. Cervera Network AGROMATTER is a strategic research and development program funded by CDTI State Program for the Generation of Knowledge and Scientific and Technological Strengthening of the R&I System, of the State Plan for Scientific and Technical Research and Innovation 2021-2023. This work was also supported by the CERCA Programme of 'Generalitat de Catalunya'. The authors thank the support of Mariona Segura in the experimental part. I. Aguilo-Aguayo and T. Lafarga thanks the Spanish Ministry of Economy, Industry, and Competitiveness and the European Social Fund for the Postdoctoral Senior Grants Ramon y Cajal (RYC-2016-19949 and RYC2021-031061-I, respectively).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Airborne transport and characterization of microalgal bioaerosols generated in raceway and tubular photobioreactors

  • Marina-Montes, César
  • Lafarga, Tomas
  • Salinas-García, María
  • Anzano, Jesús
  • Acién, Gabriel
The increasing demand for natural products has attracted special attention to microalgal biomass, which is often cultivated in open ponds. These systems are vulnerable to biological contamination, which reduces both the yield and quality of the biomass. The contamination process, particularly through airborne transport of unwanted microalgae, fungi, or bacteria, is poorly understood. In this study, bioaerosols were collected in quartz filters through a low-volume sampler located at different locations at the CIESOL demonstration plant (Almeria, Spain). The samples were analysed using metagenomics and SEM-EDS to assess the number of cells and the microbial diversity of the filters. The results revealed airborne transport of microalgae across different locations, with a gradual decrease in cell numbers as the distance from the source increased (p < 0.05). Additionally, although different microalgal strains were detected in the filters, the most abundant belonged to the Chlorellaceae family. The results of this study highlight, for the first time, that the paddlewheels of raceway ponds and the bubbling columns of tubular reactors act as significant sources of bioaerosols, which have the potential to travel considerable distances and contaminate open ponds and even closed photobioreactors.