Pasar al contenido principal

Wireless communications-based systems performance, analysis, and design

RYC2021-031949-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

MmWave channel stationarity analysis of V2X communications in an urban environment

  • Rodríguez Corbo, Fidel Alejandro
  • Azpilicueta Fernández de las Heras, Leyre
  • Celaya Echarri, Mikel
  • Shubair, Raed M.
  • Falcone Lanas, Francisco
Vehicular communication channels are subject to high nonstationarity mainly characterized by the scatterers’ and/or transceivers’ high mobility. In this sense, this letter presents a characterization of the channel quasi-stationarity regions (QSR) in a V2X generic high-dense urban environment at millimeter wave frequencies (28 GHz). Results are extracted from multiple snapshot simulations by means of a three-dimensional ray-launching algorithm inducing the continuous mobility of the vehicles on the scene and validated with an experimental campaign of measurements in the real scenario. The average power delay profile correlation matrix is used as a descriptor of the channel nonstationarity and the mean correlation is outlined for several thresholds. The obtained QSR results are consistent with the related works reported in the literature. Finally, the effects of these QSR in small- and large-scale parameters are assessed as per threshold considerations., This work was supported under Grant RYC2021-031949-I, funded by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR; and Grant PID2021-127409OB-C31, funded by MCIU/AEI/FEDER, UE.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Digital twin modelling of open category UAV radio communications: a case study

  • Aláez Gómez, Daniel
  • Iturri López, Peio
  • Celaya Echarri, Mikel
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
  • Villadangos Alonso, Jesús
  • Astrain Escola, José Javier
The modeling of radio links plays a crucial role in achieving mission success of unmanned aerial vehicles (UAVs). By simulating and analyzing communication performance, operators can anticipate and address potential challenges. In this paper, we propose a full-featured UAV software-in-the-loop digital twin (SITL-DT) for a heavy-lifting hexacopter that integrates a radio link module based on an experimental path loss model for ‘Open’ category Visual Line of Sight (VLOS) conditions and drone-antenna radiation diagrams obtained via electromagnetic simulation. The main purpose of integrating and simulating a radio link is to characterize when the communication link can be conflicting due to distance, the attitude of the aircraft relative to the pilot, and other phenomena. The system architecture, including the communications module, is implemented and validated based upon experimental flight data., This work has been supported in part by Grant No. RYC2021-031949-I funded by MCIN/AEI/10.13039/501100011033, Spain and NextGeneration EU/PRTR; in part by the Ministerio de Ciencia e Innovación (Spain) under the research grants TED2021-131716B-C21 SARA, CONDOR-Connected PID2021-127409OB-C31; and in part by the Government of Navarre (Departamento de Desarrollo Económico), Spain under the research grant PC109-110 NAITEST. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Universal kriging for accurate shadow fading modeling in LOS/NLOS conditions

  • Diago Mosquera, Melissa
  • Cuevas-Pacheco, Francisco
  • Azpilicueta Fernández de las Heras, Leyre
Traditional path loss (PL) models often fail to capture the spatial characteristics of wireless channels in environments combining line-of-sight (LOS) and non-line-of-sight (NLOS) conditions, where shadow fading exhibits clear spatial non-stationarity. To address this limitation, we propose a Universal Kriging (UK)-based model tailored for predicting shadow fading effects in such scenarios. UK, a method well-suited for non-stationary data, enables more accurate spatial interpolation by incorporating both deterministic trends and stochastic variations. We validate the model using 28 GHz measurements collected in a library environment. Results show that UK consistently outperforms Ordinary Kriging (OK), achieving a 3.7 dB root-mean-square-error (RMSE) reduction in 90% of test cases and reducing the mean RMSE by 69.3% (from 4.85 dB to 1.49 dB). These findings highlight UK’s potential for improving PL prediction accuracy in complex LOS/NLOS propagation scenarios., This work was supported by the Chilean Research Agency ANID, through research grants ANID FONDECYT 11240070, 11240330 and ANID Basal Project AFB240002 (AC3E), and the support received by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR [Grant No. RYC2021-031949-I].
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

An acceleration approach for channel deterministic approaches based on quasi-stationary regions in V2X communications

  • Rodríguez Corbo, Fidel Alejandro
  • Celaya Echarri, Mikel
  • Shubair, Raed M.
  • Falcone Lanas, Francisco
  • Azpilicueta Fernández de las Heras, Leyre
Vehicular environments are characterized by a high mobility, which alongside with the presence of abundant dynamic scatterers, lead to vehicular communication channels to be intrinsically non-stationary. In this sense, the quasi-stationary regions (QSRs) can assess the degree of non-stationarity within a determined scenario, and ultimately assist geometrical models to increase channel sampling intervals or to develop more efficient hybrid stochastic-geometric channel models. In this work, the channel QSRs in a vehicular communication (V2X) generic highdense urban environment at millimeter wave (mmWave) frequencies (28 GHz) have been analyzed using different approaches, such as the extended channel response into a Doppler-delay domain or the shadow fading spatial auto-correlation function (SF ACF) methodology. Then, the QSRs have been used as sampling distance in an in-house developed three-dimensional ray-launching (3D-RL) algorithm as an acceleration approach. The time variant channel features have been extracted and compared with the full resolution approach, obtaining consistent results when considering the QSR sampling distances, while decreasing by 83.30% the simulation computational time for the Doppler-delay approach, and 92.86% for the SF ACF method., This work was supported by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR [Grant No. RYC2021-031949-I].
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Diffuse-scattering-informed geometric channel modeling for THz wireless communications systems

  • Azpilicueta Fernández de las Heras, Leyre
  • Schultze, Alper
  • Celaya Echarri, Mikel
  • Rodríguez Corbo, Fidel Alejandro
  • Constantinou, Costas
  • Shubair, Raed M.
  • Falcone Lanas, Francisco
  • Navarro Cía, Miguel
Surpassing 100 Gbps data throughput is a key objective and an active area of research for sixth-generation (6G) wireless networks that can only be met by exploiting the TeraHertz (THz) frequency band (0.3 - 10 THz). THz channel modeling faces new challenges given the emerging relevance of scattering and molecular absorption in this frequency range as well as the lack of a reliable library of material properties. In this work, we address these challenges by measuring systematically the dielectric properties of 27 common building and office materials and reporting an in-house three-dimensional ray-launching (3D-RL) algorithm that uses the created material library and accounts for rough surface scattering and atmospheric attenuation. In order to validate the proposed algorithm, a channel sounder measurement campaign has been performed in a typical indoor environment at 300 GHz. Simulations and measurements show good agreement, demonstrating the need for modelling scattering and atmospheric absorption in the THz band. The proposed channel model approach enables scenarios at THz frequencies to be investigated by simulation, providing a relevant knowledge for the development of ultra-high-speed wireless communication systems., This work was supported in part by the Royal Society under Grant IES\R3\183131, in part by the Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/S018395/1 and Grant EP/X014118/1, and in part by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR under Grant RYC2021-031949-I and Grant PID2021-127409OB-C31.