Pasar al contenido principal

Coupled processes in geo-energies

RYC2021-032780-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physics‐Based Modeling to Understand and to Propose Forecasting Methods of Induced Seismicity

  • Boyet, Auregan
  • Vilarrasa, Víctor
  • De Simone, Silvia
Induced seismicity compromises the widespread deployment of geoenergy applications that contribute to mitigate climate change. In particular, the development of Enhanced Geothermal Systems (EGS) has been hindered by the risk of induced seismicity, mostly caused by hydraulic stimulation aimed at enhancing the permeability of deep hot crystalline rocks. Injection‐induced seismicity has been traditionally attributed to fluid pressure buildup, which destabilizes fractures and faults. However, the largest seismic events commonly occur after the stop of injection, when pore pressure drops and both the magnitude and frequency of induced seismicity is expected to decrease. This counterintuitive phenomenon is not well understood. Yet, understanding the triggering mechanisms is the key to reliably forecast and manage induced seismicity. Here, we investigate the triggering mechanisms of co‐ and post‐injection seismicity using coupled hydromechanical models, considering both a homogeneous and a fault‐crossed domain, based on the case of Basel EGS (Switzerland). We find that the combination of pressure diffusion, poroelastic stressing, and static stress transfer explains the occurrence of induced seismicity, especially after the stop of injection, significantly better than the pore pressure alone. Considering a fault zone, which is more permeable and deformable than the surrounding rock, amplifies pressure diffusion along the fault and causes anisotropic variations of the stress field that lead to an increase in the seismicity rate that is orders of magnitude larger than for the homogeneous domain. These results point out that identifying the main geological structures through subsurface characterization is key to improve physics‐based induced seismicity forecasting., A.B. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) under Grant agreement No. 801809. IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Grant CEX2018-000794-S funded by MCIN/AEI/ 10.13039/501100011033). IMEDEA is an accredited"Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033) S.D.S. acknowledges the support of the European Union “Next Generation EU”/PRTR and the Spanish Ministry of Science and Innovation through the ‘Ramón y Cajal’ fellowship (reference RYC2021-032780-I)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001198-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding post-injection seismicity: Causes and mechanisms of trailing earthquakes in Enhanced Geothermal Systems

  • Boyet, Auregan
  • De Simone, Silvia
  • Cappa, Frédéric
  • Vilarrasa, Víctor
Enhanced Geothermal Systems (EGS) employ fluid injection for both reservoir stimulation and circulation, a practice that may sometimes induce earthquakes. Paradoxically, numerous EGS projects have observed the occurrence of the largest-magnitude earthquake (LME, 1.6 < M < 5.5) after injection cessation, posing a significant challenge for the development of geothermal power plants. This paper aims to examine the cases of postinjection LME observed in EGS, and provide a detailed understanding of the coupled mechanisms responsible for seismic activity during and after fluid injection. We report the mechanisms that have been hypothesised for different cases of LME emerging in the post-injection phase of EGS. The analysis of post-injection LME cases reveals two types of seismicity, early and late, differentiated by the time at which pore pressure changes become negligible, i.e., a post-injection time longer than the injection time. Notably, we remark that, for most cases of early post-injection high-magnitude earthquakes, the primary triggering mechanisms involve pore pressure diffusion, thermal effects, poromechanical stress relaxation and static stress transfer resulting from seismic fault slip. Conversely, prolonged fluid injections could lead to the gradual accumulation of stress on faults, mainly due to aseismic slip, causing late post-injection LME. Furthermore, recent studies have also demonstrated the importance of the initial fault stress criticality in influencing the post-injection behaviour of fault aseismic slip and trailing seismicity. Finally, we present recent efforts devoted to develop effective methodologies for mitigating induced seismicity, and the current research perspectives aimed at forecasting and minimizing seismic activity associated with EGS., A.B. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) under Grant agreement No. 801809. S.D.S. and V.V. acknowledge support from the Spanish Ministry of Science, Innovation and Universities through project HydroPoreII (PID2022-137652NB- C44). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MICIU/AEI/10.13039/ 501100011033). S.D.S. acknowledges the support by MICIU/AEI/ 10.13039/501100011033 and by the “European Union Next Generation EU/PRTR” through the ‘Ramón y Cajal’ fellowship (reference RYC2021- 032780-I). F.C. acknowledges the financial support by the Agence Nationale de la Recherche (ANR) through the INSeiS project under contract ANR-22-CE49-0018 (PI: L. De Barros, Universit´e Cˆote d’Azur, France) and the Institut Universitaire de France (IUF)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review of thermo-hydro-mechanical modeling of coupled processes in fractured rock: From continuum to discontinuum perspective

  • Vaezi, Iman
  • Yoshioka, Keita
  • De Simone, Silvia
  • Gómez-Castro, Berta María
  • Paluszny, Adriana
  • Jalali, Mohammadreza
  • Berre, Inga
  • Rutqvist, Jonny
  • Min, Ki Bok
  • Lei, Qinghua
  • Makhnenko, Roman Y.
  • Hu, Mengsu
  • Tsang, Chin Fu
  • Vilarrasa, Víctor
Coupled thermo-hydro-mechanical (THM) processes in fractured rock are playing a crucial role in geoscience and geoengineering applications. Diverse and conceptually distinct approaches have emerged over the past decades in both continuum and discontinuum perspectives leading to significant progress in their comprehending and modeling. This review paper offers an integrated perspective on existing modeling methodologies providing guidance for model selection based on the initial and boundary conditions. By comparing various models, one can better assess the uncertainties in predictions, particularly those related to the conceptual models. The review explores how these methodologies have significantly enhanced the fundamental understanding of how fractures respond to fluid injection and production, and improved predictive capabilities pertaining to coupled processes within fractured systems. It emphasizes the importance of utilizing advanced computational technologies and thoroughly considering fundamental theories and principles established through past experimental evidence and practical experience. The selection and calibration of model parameters should be based on typical ranges and applied to the specific conditions of applications. The challenges arising from inherent heterogeneity and uncertainties, nonlinear THM coupled processes, scale dependence, and computational limitations in representing field scale fractures are discussed. Realizing potential advances on computational capacity calls for methodical conceptualization, mathematical modeling, selection of numerical solution strategies, implementation, and calibration to foster simulation outcomes that intricately reflect the nuanced complexities of geological phenomena. Future research efforts should focus on innovative approaches to tackle the hurdles and advance the state-of-the-art in this critical field of study., I.V. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (grant agreement No. 801809). S.D.S. acknowledges the support by MICIU/AEI/10.13039/501100011033 and by "European Union Next Generation EU/PRTR" through the ‘Ramón y Cajal’ fellowship (reference RYC2021-032780-I). S.D.S. and V.V. acknowledge the funding by MICIU/AEI/10.13039/501100011033 and by “ERDF, EU” through the ‘HydroPoreII’ project (reference PID2022-137652NB-C44). K.B.M. is grateful for the support by the Institute for Korea Spent Nuclear Fuel (iKSNF) and National Research Foundation of Korea (NRF) grant funded by the Korea government (Ministry of Science and ICT, MSIT) (2021M2E1A1085196). Q.L. is grateful for the support by the Swedish Radiation Safety (SSM), Swedish Transport Administration (Trafikverket), Swedish Rock Engineering Foundation (BeFo), and Nordic Energy Research (Grant 187658). M.H.’s and J.R.’s contribution to this review was supported by the US Department of Energy (DOE), the Office of Nuclear Energy, Spent Fuel and Waste Science and Technology Campaign, and by the US Department of Energy (DOE), the Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division both under Contract Number DE-AC02-05CH11231 with Lawrence Berkeley National Laboratory. R.M. acknowledges the support from the US National Science Foundation (grant CMMI-2239630). I.B. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 101002507). A.P. thanks the UK Natural Environment Research Council (NERC) for funding SeisGreen Project (Grant No. NE/W009293/1) which supported this work. A.P. also thanks the Royal Society UK for supporting this research through fellowship UF160443. IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MICIU/AEI/10.13039/501100011033)., Peer reviewed