Pasar al contenido principal

Diseño integral de catalizadores para aplicaciones energéticas y mediambientales: Desde el diseño racional de sitios activos hasta la fabricación de prototipos

RYC2021-034791-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Low pressure-drop CuO/CeO2/UiO-66 catalysts for H2 purification

  • Moraes, Carlos W. Dos Santos
  • Gómez Bernabéu, P.
  • Gómez Villegas, Katia J.
  • Guillén-Bas, Esteban
  • Martínez López, Iván
  • López Suárez, Franz Edwin
  • Davó-Quiñonero, Arantxa
  • Fairen-Jimenez, David
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Gómez Villegas, Katia J.|||/items/80196532-578e-408c-83fe-027add2b27cb
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • López Suárez, Franz Edwin|||/items/03f755cb-b680-4427-982f-28b377a4ce3b
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Moraes, Carlos W. Dos Santos|||/items/d7f8b121-2eac-4bd5-97b1-e25b6234bb14
Pressure drop is responsible of a great part of the energy cost in industry due the energy consumed by pumps driving a fluid through the installation, and heterogeneous catalysis industrial processes suffer from this pressure drop penalty. This study demonstrates that UiO-66 significantly improves the catalytic performance of the CuO/CeO2 active phase for preferential CO oxidation in H2 streams with regard to a conventional γ-Al2O3 carrier due to the particular porous and crystalline properties of MOF materials. A packed bed of UiO-66 produces very low-pressure drop in comparison to conventional catalytic carriers, such as γ-Al2O3 or beta zeolite, being 4 times lower for UiO-66 than for γ-Al2O3 under 2 L/min flow of N2, and this ratio increases and approaches ∞ for lower gas flow rates. This feature of UiO-66 not only decreases the energy required to pump gases through the catalytic bed, but also improves catalytic performance of UiO-66-supported catalysts due to the enhanced gas diffusion into the catalytic bed. The reaction gases flow through the interparticle space left by the catalyst in a packed bed of CuO/CeO2/γ-Al2O3, and this produces high pressure drop, preferential gas pathways and mass transport limitations, negatively affecting the reaction rate. On the contrary, the reaction gases are able to flow through the UiO-66 material without channel constrictions, and the CuO/CeO2/UiO-66 catalysts avoid the gas diffusion restrictions of conventional catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Scaling up Ru/NiO-CeO2 CO2 methanation catalysts. Comparison of 3D printed steel and carbon monolith supports

  • Bueno-Ferrer, Juan
  • De-La-Torre, Unai
  • Onrubia-Calvo, Jon A.
  • Martínez-Fuentes, José Clemencio
  • Martínez López, Iván
  • Davó-Quiñonero, Arantxa
  • Pereda-Ayo, Beñat
  • González-Marcos, José A.
  • Lozano-Castello, Dolores
  • González-Velasco, Juan R.
  • Bueno López, Agustín
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
The CO2 methanation reaction was studied using supported catalysts on monolithic structures under high space velocities (11,000 – 56,700 h-1), and the effect of the exothermicity of the reaction on the catalyst temperature and the catalytic performance was evaluated. A Ru/NiO-CeO2 nanoparticles (NP) catalyst was supported on steel and carbon monoliths, which were fabricated using 3D printing. The results demonstrate that the performance of the active phase is affected by the support material. Better results were achieved with carbon monoliths than with steel monoliths, due to the lower thermal conductivity of carbon (0.43 and 1.20 W m-1 K-1, respectively). Steel dissipates the energy released by the exothermic methanation reaction more effectively, while carbon monoliths retain this energy within the structure, favoring local heating of the active phase. The positive effect of carbon support leads to energy savings, as the power consumed to heat the furnace remains constant regardless of the support material. Meanwhile, the energy released by the reaction is dissipated less and used more efficiently by carbon supports. The design of the channel network of supports has a minimal impact on catalytic performance under the high flow rates employed in this study.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Positive Effect of Carbon Monolith Porosity Sealing with MgO in the CO2 Hydrogenation to CH4 Using NiO-CeO2 Active Phase

  • Martínez López, Iván
  • Davó-Quiñonero, Arantxa
  • Guillén-Bas, Esteban
  • Martín-García, Iris
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
Carbon monolith supports have been manufactured using 3D printed channels template and resorcinol-formaldehyde carbonizable resin. These carbon monoliths were loaded with NiO-CeO2 nanoparticles (Np) as the active phase and tested for CO2 hydrogenation to CH4, focusing on the effect of sealing the carbon porosity with MgO. The MgO coating improves CO2 conversion to CH4 by preventing the NiO-CeO2 nanoparticles from settling within the microporous structure of the carbon support, where gas diffusion limitations hinder access to the active phase. This was confirmed by SEM images, which evidence the introduction of NiO-CeO2 (Np) into the carbon matrix of the bare carbon monolith support and the accumulation of the active phase at the surface of the monolith channels once the porosity is sealed. Other characterization techniques, like N2 adsorption and Hg porosimetry, confirm that the porosity is blocked by MgO. On the other hand, it has been demonstrated that there is not a relevant chemical effect of MgO on the NiO-CeO2 (Np) catalytic performance for the carbon monoliths-supported catalysts, because the contact between the MgO and NiO-CeO2 phases is poor due to the dispersing effect of carbon.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Structural design and particle size examination on NiO-CeO2 catalysts supported on 3D-printed carbon monoliths for CO2 methanation

  • Martínez López, Iván
  • Martínez-Fuentes, José Clemencio
  • Bueno-Ferrer, Juan
  • Davó-Quiñonero, Arantxa
  • Guillén-Bas, Esteban
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
3D-printed high-surface carbon monoliths have been fabricated and tested as catalyst supports of CO2 metha nation active phases (NiO-CeO2, 12 wt% Ni). The carbon carriers show a developed microporosity and good adherence to the catalytic phases of NiO-CeO2, showing great stability and cyclability. Two monolith designs were used: a conventional parallel-channeled structure (honeycomb) and a complex 3D network of non-linear channels built upon interconnected circular sections (circles), where flow turbulences along the reactant gas path are spurred. The effect of the active phases particle size on the catalyst distribution and the overall per formance has been assessed by comparing NiO-CeO2 nanoparticles of 7 nm verage (Np), with a reference counterpart of uncontrolled structure (Ref). The improved radial gases diffusion in the circles monolith design is confirmed, and nanoparticles show enhanced CO2 methanation activity than the uncontrolled-size active phase at low temperatures (< 300 ºC). On the contrary, the Ref catalysts achieve higher CH4 production at higher temperatures, where the reaction kinetics is controlled by mass transfer limitations (T > 300 ºC). SEM and Hg porosimetry evidence that nanoparticles are deposited at deeper penetration through the narrow micropores of the carbon matrix of the monolithic supports, which tend to accumulate on the channels surface remaining more accessible to the reactant molecules. Altogether, this study examines the impact of the channel tortuosity and the active phase sizing on the CO2 methanation activity, serving as ground knowledge for the further rational and scalable fabrication of carbon monolith for catalytic applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly active, selective and stable Ru/NiO-CeO2 catalyst for low-temperature CO2 methanation

  • Bueno-Ferrer, Juan
  • López-Rodríguez, Sergio
  • Martínez López, Iván
  • Martín-García, Iris
  • Guillén-Bas, Esteban
  • Perez Dieste, Virginia
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
Ni, Ru and CeO2-based bimetallic catalysts have been prepared and studied for low-temperature CO2 methanation, optimizing both the composition and synthesis method. The most active catalyst obtained, with 1.6 % wt. Ru and 10 % wt. Ni, was synthesized by ruthenium impregnation on NiO-CeO2 mixed oxide nanoparticles, which were prepared by reversed microemulsion. The onset reaction temperature is 190 °C and yields 26 μmol CH4·s−1·gcat−1 at 250 °C and atmospheric pressure, with 100 % selectivity to CH4, being among the most active reported catalysts at low temperature. The high catalytic activity is attributed to the intimate contact between Ni and Ce cations on solid solution nanoparticles (7–8 nm), which promotes the creation of vacant sites for CO2 chemisorption and dissociation, and further impregnation of ruthenium generates a synergy that facilitates low-temperature reducibility. In situ DRIFTS experiments confirmed that CeO2 doping with Ni2+ promotes CO2 chemisorption, while ruthenium improves further hydrogenation of the surface carbon species. Isotopic 13C18O2 pulse experiments and NAP-XPS experiments with synchrotron radiation evidence that oxygen from CO2 is retained on the catalyst upon dissociation, and that H2O evolves with catalyst oxygen. The Ce3+/Ce4+ cations play the main role in this oxygen exchange process, Ni2+ improves CeO2 reduction and promotes the creation of oxygen vacancies where CO2 is evenly chemisorbed and dissociated, and ruthenium is highly reduced to metal state under reaction conditions, which explains the effective dissociation of H2 and fast hydrogenation of the surface carbon intermediates.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

3D-printed high-reliability alloy-based monoliths as structured supports for CO2 methanation catalysts

  • Martínez-Fuentes, José Clemencio
  • Chirita, Diana Alexandra
  • Martínez López, Iván
  • Bueno-Ferrer, Juan
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Davó-Quiñonero, Arantxa
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
Metallic monolithic substrates are emerging as a next-generation platform for structured catalysts due to their high thermal conductivity, mechanical robustness, and excellent mass-transfer characteristics. Here, metal honeycomb monoliths based on 17–4PH, 316 L, and Inconel 718 alloys were fabricated by fused deposition modeling (FDM)-based metal additive manufacturing (AM) and employed as support for NiO-CeO2 nanoparticulate catalysts in CO2 methanation reaction. Particular emphasis was placed on correlating the microstructural, mechanical, thermal, and corrosion properties of the printed alloys with their suitability as catalytic supports. Although all monoliths exhibited thermal expansion coefficients close to those of fully dense alloys, markedly lower flexural Young's modulus and hardness (HRB) values were obtained because of the residual porosity and microstructural heterogeneity inherent to the FDM printing and sintering route. These results underline the high sensitivity of the mechanical properties to incomplete densification in additively manufactured metals, while still providing sufficient mechanical integrity for catalyst handling, coating and stable operation under the CO2 methanation reaction conditions investigated in this work. H2-TPR, TEM, and XPS analyses confirmed that catalytic behavior was governed by the NiO-CeO2 active phase and remained essentially independent of the metallic substrate, resulting in comparable catalytic activity and methane selectivity among the three alloys. In contrast, accelerated corrosion tests revealed pronounced alloy-dependent durability, with 316 L providing the most favorable balance between oxidation resistance, mechanical stability, and material cost. These results demonstrate the potential of metal additive manufacturing to produce robust and application-oriented catalytic monoliths for CO2 conversion under harsh industrial conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Three-dimensionally ordered macroporous MgO on NiO-CeO2 nanoparticles for the integrated CO2 capture and methanation

  • Davó-Quiñonero, Arantxa
  • Martínez López, Iván
  • Berenguer-López, José
  • Martín-García, Iris
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
Integrated CO2 capture and methanation using dual-function materials (DFMs) offers a route for the direct conversion of diluted CO2 streams into synthetic methane. In this work, novel DFMs consisting of NiO-CeO2 nanoparticles combined with three-dimensionally ordered macroporous (3DOM) MgO were prepared using a polymethyl methacrylate (PMMA) hard-templating method. The influence of MgO loading and structure on CO2 capture and methanation performance was investigated and compared with a non-templated MgO reference. MgO incorporation increased the CO2 uptake capacity, reaching 120 μmol CO2 g−1 at 200 °C for the 30% 3DOM material, but partially reduced the intrinsic methanation activity of the NiO-CeO2 phase. Nevertheless, the 3DOM architecture outperformed the corresponding reference material at the same MgO loading, demonstrating the beneficial role of the ordered macroporous structure. X-ray photoelectron spectroscopy (XPS) and H2 temperature-programmed reduction (H2-TPR) showed that MgO does not significantly modify the electronic properties of the NiO-CeO2 nanoparticles. The results show that the balance between CO2 adsorption and catalytic conversion is strongly influenced by the MgO structure, with the 30% 3DOM material providing the best overall compromise between CO2 capture and methanation performance. Integrated capture-methanation performance remained stable over two consecutive cycles. These results highlight the potential of these materials for integrated CO2 capture and methanation applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Poisoning effect of chlorine anions in the catalytic activity of CuO/CeO2/UiO-66 for CO-PROX reaction and strategy for catalyst activation

  • Moraes, Carlos W. Dos Santos
  • Gómez Bernabéu, P.
  • Gómez Villegas, Katia J.
  • Guillén-Bas, Esteban
  • Martínez López, Iván
  • Davó-Quiñonero, Arantxa
  • Fairen-Jimenez, David
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Gómez Villegas, Katia J.|||/items/80196532-578e-408c-83fe-027add2b27cb
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Moraes, Carlos W. Dos Santos|||/items/d7f8b121-2eac-4bd5-97b1-e25b6234bb14
UiO-66 was synthesized using ZrOCl2·8H2O as metal precursor, and CuO/CeO2/UiO-66 catalysts were prepared and tested for preferential CO oxidation in H2-rich streams (CO-PROX reaction), a reaction of practical significance in hydrogen purification for fuel cells. The study highlights the detrimental effect of residual chlorine anions from UiO-66 synthesis and DMF washing on the catalytic performance of CuO/CeO2/UiO-66. An activation strategy involving rigorous water washing and thermal treatment at 160 °C under CO-PROX conditions was developed. Both steps were deemed necessary, as employing only one proved insufficient to reduce chlorine levels to non-poisoning thresholds. This activation procedure does compromise UiO-66 crystallinity and porosity, but it is justified by achieving a fully functional catalyst. TEM images confirm the uniform dispersion of the CuO/CeO2 active phase on the UiO-66 matrix post-activation and after catalytic testing. A 16-h CO-PROX test at 160 °C with the CuO/CeO2/UiO-66 catalyst, once activated, demonstrated stable performance throughout the extended long-term experiment. This research provides valuable insights into optimizing CuO/CeO2/UiO-66 catalysts for CO-PROX application.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ru/NiO-CeO2-catalyzed CO and CO2 CO-methanation

  • Bueno-Ferrer, Juan
  • Martínez López, Iván
  • Martín-García, Iris
  • Guillén-Bas, Esteban
  • Perez Dieste, Virginia
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
A highly active Ru/NiO-CeO2 (NP) catalyst, synthesized by ruthenium impregnation on NiO-CeO2 mixed oxide 7–8 nm nanoparticles, has been studied for the individual and simultaneous methanation of CO and CO2, showing onset CH4 production in co-methanation at 200 °C, and maximum CH4 production at 350 °C. Isotopic gas pulse experiments indicated that the catalyst is continuously reduced by H2, yielding catalyst oxygen (16O)-containing water, and it is re-oxidised with 18O once 12C18O or 13C18O2 are pulsed. The catalyst exchanges 16O atoms with the 12C18O and 13C18O2 pulsed gases simultaneously to the hydrogenation to methane. Ru improves the hydrogenation steps and methane production, which is mainly relevant during the CO + CO2 co-methanation, and the formation of NiO-CeO2 solid solution improves the COx chemisorption and favors the hydrogenation of the surface carbon reaction intermediates. DRIFTS experiments indicated that chemisorption of CO and CO2 yields the same surface species (bicarbonates and carbonyls), which means that the catalyst dissociates the CO2 molecule to yield carbonyls and it is also able to oxidize CO with catalyst oxygen to yield bicarbonates. NAP-XPS experiments evidenced that the main redox process during the solo CO2 methanation occurs at the Ni2+-CeO2 interface, and that ruthenium is highly and homogeneously reduced, keeping Ru0 stable under reaction conditions. The effect of CO in the oxidation state of the catalyst surface is negligible using pure CO, a CO methanation mixture (CO + H2), and a co-methanation mixture (CO + CO2 + H2), and the reducing effect of H2 always prevails.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

3D printed steel monoliths for CO2 methanation: A feasibility study

  • Martínez-Fuentes, José Clemencio
  • Martínez López, Iván
  • Bueno-Ferrer, Juan
  • Garrigós-Pastor, Germán
  • Guillén-Bas, Esteban
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
Steel honeycomb monoliths have been manufactured by Fused Deposition Modelling-FDM 3D printing technology using 90 % 17–4 PH steel nanoparticles-loaded polymer filament. Pure steel monoliths were obtained after thermal removal of the polymer and steel sintering. NiO-CeO2 active phase nanoparticles were loaded on powder steel and on the steel monoliths, and the supported catalysts were tested in the hydrogenation of CO2 to CH4, paying special attention to the steel pretreatment before active phase loading. The catalytic experiments confirm that totally functional catalysts have been prepared, showing 100 % selective conversion of CO2 to CH4 above 225 ºC and stability in long-term experiments (18 hours at 325 ºC). The catalytic behaviour is improved by H2O2-pretreatment of the steel honeycomb monoliths before the active phase loading. XPS characterization confirms that the surface of the catalysts is oxidised on the fresh catalysts and gets even more oxidised after the catalytic tests. The H2O2-pretreatment of the steel support partially avoids the additional oxidation under reaction conditions, keeping chromium and cerium cations less oxidised than on the catalyst prepared with untreated steel. In addition, evidence about the electronic interaction between the steel support and the NiO-CeO2 (np) active phase are obtained.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Understanding the CO2 methanation mechanism on nanostructured bimetallic Ru/NiO–CeO2 catalysts

  • Bueno-Ferrer, Juan
  • Martínez López, Iván
  • Martín-García, Iris
  • Guillén-Bas, Esteban
  • Pérez-Dieste, Virginia
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
The CO2 methanation reaction mechanism has been studied by isotopic pulse experiments followed by rapid scan DRIFTS-MS and NAP-XPS using synchrotron radiation for mono- and bimetallic Ru/NiO–CeO2 catalysts. CeO2 and NiO–CeO2 (10 % wt. Ni) nanoparticles (NP; 7–8 nm) were prepared by reversed microemulsion, and Ru (1.6 % wt.) was impregnated afterwards. The reaction mechanism starts with the reduction of the catalysts by H2, H2O release and generation of a high population of oxygen vacancies on the catalysts surface where CO2 is evenly chemisorbed and dissociated. The exchange of oxygen atoms between the chemisorbed CO2 molecules and the catalysts occurs simultaneously to the hydrogenation of the carbon intermediates to yield CH4. The most active catalyst (Ru/NiO–CeO2 (NP)) has the best balance between CO2 chemisorption and further hydrogenation of the reaction intermediates. NAP-XPS experiments confirm the redox participation of the Ni2+–CeO2 interface in the chemisorption and dissociation of CO2, and the importance of the Ru0 stability under reaction conditions. Ru/NiO–CeO2 (NP) combines both features, while Ru0 is not stable and is partially oxidised under reaction conditions on Ru/CeO2 and on a counterpart Ru/NiO–CeO2 catalyst prepared without particle size control. Rapid scan DRIFTS-MS confirms the efficient CO2 chemisorption and fast hydrogenation of the reaction intermediates observed (mainly carbonyls and bicarbonates) on Ru/NiO–CeO2 (NP), while the counterpart catalyst prepared without size control is not able to chemisorb CO2 so efficiently and the Ni-free catalyst is less active for CO2 methanation because the surface carbon species created upon CO2 chemisorption are more difficult to be hydrogenated.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Engineering Ni-CeO2 catalysts for coke-free ethanol steam reforming

  • Chirita, Diana Alexandra
  • Martínez López, Iván
  • Bueno-Ferrer, Juan
  • Martínez-Fuentes, José Clemencio
  • Martín-García, Iris
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
Ethanol steam reforming (ESR) is a promising pathway for renewable hydrogen production, yet the development of Ni-based catalysts that simultaneously deliver high activity and strong resistance to coke deposition remains a major challenge. This work compares three Ni-CeO2 catalysts synthesized by physical calcination, incipient wetness impregnation, and reverse microemulsion, denoted as Ni-CeO2 (ref), Ni/CeO2 (IW), and Ni-CeO2 (NPs), respectively. Their structure-performance relationships were evaluated to understand how synthesis influences ESR activity and carbon formation. All catalysts follow similar reaction mechanisms (ethoxy dehydrogenation to acetaldehyde, oxidative routes, and direct acetaldehyde decomposition), yet their behavior differs markedly due to structural features. Both Ni/CeO2 (IW) and Ni-CeO2 (NPs) reach high hydrogen production, with yields above 77%. However, the Ni-CeO2 (NPs) catalyst, composed of well-defined nanoparticles and exhibiting the highest concentration of oxygen vacancies, significantly suppresses methane formation and enhances reforming pathways. A key finding is the exceptional coke resistance of the Ni-CeO2 (NPs) material. Post-reaction analyses show substantial carbon accumulation on Ni-CeO2 (ref) and noticeable coke on Ni/CeO2 (IW), whereas Ni-CeO2 (NPs) remains essentially free of carbon deposits even after extended operation. This remarkable stability is attributed to its optimized nanostructure, finely distributed Ni domains, and enhanced redox capacity, which collectively promote continuous surface oxygen availability and hinder the buildup of carbonaceous residues. Overall, the results highlight the crucial role of rational designing Ni-CeO2 catalysts and demonstrate that nanoparticle-engineered materials offer a promising route to achieving highly active, methane-suppressing, and coke-resistant catalysts for sustainable hydrogen production via ESR.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Evaluation of Zr-based MOFs (UiO-66 and MOF-808) as Ru/NiO-CeO2 support for CO2 methanation

  • Moraes, Carlos W. Dos Santos
  • Bueno-Ferrer, Juan
  • Martínez López, Iván
  • Guillén-Bas, Esteban
  • Martín-García, Iris
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Moraes, Carlos W. Dos Santos|||/items/d7f8b121-2eac-4bd5-97b1-e25b6234bb14
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
Ru/NiO-CeO2 nanoparticles supported on Zr-MOFs (UiO-66 and MOF-808) have been prepared and studied for CO2 hydrogenation to CH4, paying special attention to the MOFs stability under reaction conditions. Both supported catalysts were active and selective, and were characterised by means of XRD, N2 physisorption isotherms at −196 ºC, TEM, XPS and DRIFTS before and after the reaction. The XRD characterization of the fresh and used supported catalysts evidences the gradual degradation of both MOF supports between 200 and 275 ºC under reaction conditions, which becomes very relevant at 300 ºC and higher temperatures. Despite this degradation, UiO-66 shows higher stability than MOF-808 under CO2 methanation conditions, which can be attributed to the rigid structure of UiO-66 compared to MOF-808. The large pores and flexibility of MOF-808 seems to weaken the framework under reaction conditions. In situ DRFIT spectra showed that some characteristic bands of UiO-66 are still observed under reaction conditions until 300 ºC, suggesting that, despite the structural modifications, UiO-66 is not totally degraded but is transformed into a derived solid. This is also in agreement with the only partial decrease of the porosity deduced from N2 adsorption characterization and with the TEM observations. On the contrary, Ru/NiCe/MOF-808 spectra evidence total degradation of this MOF-808 at 300 ºC.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fuel from air: NiO-CeO2 nanoparticles, MgO and beta zeolite dual function materials for direct CO2 capture and hydrogenation to CH4

  • Martínez López, Iván
  • Martín-García, Iris
  • Davó-Quiñonero, Arantxa
  • Rodríguez-Bobada, Raquel
  • Vilaplana-Ortego, Eduardo
  • Guillén-Bas, Esteban
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
Dual function materials based on NiO-CeO2 nanoparticles and MgO supported on beta zeolite have been prepared and tested for direct capture of CO2 from air and further hydrogenation to CH4. Catalysts characterisation shows highly microporous materials with good dispersion of the NiO-CeO2 active phase on the zeolite carrier and a slight blockage of zeolite pores. H2-TPR and XPS characterisation reveal that the beta zeolite improves the reducibility of the dispersed NiO-CeO2 active phase. Among the synthesis methods tested, impregnation-calcination is more convenient than zeolite crystallization in the presence of NiO-CeO2, leading to materials with higher catalytic activity in the CO2 methanation reaction. On the contrary, the NiO-CeO2 loading had little effect in the range studied (10, 20 %). The presence of MgO disrupts the intrinsic high catalytic performance of NiO-CeO2, but this penalty is not encountered when both MgO and NiO-CeO2 are dispersed on the beta zeolite support. CO2 capture from air at 35 °C, studied by thermogravimetry, suggests that CO2 chemisorption on MgO and NiO-CeO2 prevails with regard to physisorption on beta zeolite. In situ DRIFTS analysis showed that the mechanism of CO2 adsorption involved carbonate and bicarbonate species and revealed that isolated silanol groups of the beta zeolite can act as CH4 trapping sites. Therefore, the MgO and NiO-CeO2 containing beta zeolite catalyst is an adequate dual function material to capture CO2 directly from air and catalyse the hydrogenation of the CO2 captured to CH4.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Nanoshaping inverse CeO2/CuOx catalysts for the preferential CO oxidation (CO-PROX) reaction: Investigation of the interface contact

  • Gómez Villegas, Katia J.
  • Martínez-Fuentes, José Clemencio
  • Martínez López, Iván
  • Guillén-Bas, Esteban
  • Martín-García, Iris
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Davó-Quiñonero, Arantxa
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Gómez Villegas, Katia J.|||/items/80196532-578e-408c-83fe-027add2b27cb
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
Herein, we explore in the catalytic behaviour in the preferential CO oxidation (CO-PROX) reaction of “inverse catalysts” where ceria is dispersed on a copper oxide support. The loadings of CeO2 in the catalysts were optimised and different ceria nanostructures were investigated. Namely, ceria nanoparticles (NP), ceria nanorods (NR), ceria nanocubes (NC), and a polycrystalline reference (RF) were dispersed on a CuOx support. 30% CeO2 was assessed as the optimum load, while bigger and bulky polycrystalline RF particles exhibited the best performance, followed by NR, NC and ultimately, NP. While X-ray photoelectron spectroscopy (XPS) analyses revealed the enhanced surface redox features of 30% RF/CU and 30% NP/CU, CO-PROX in situ diffuse reflectance infra-red Fourier transform spectroscopy (DRIFTS) and O2(36) pulse isotopic experiments showed that carbonates formed upon CO exposure on CeO2 RF assist in the Mars-van Krevelen CO-PROX mechanism, in contrast to NP, where no carbonates were formed. This study presents a comprehensive investigation of CeO2/CU inverse catalysts for CO-PROX reaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Rh/Ce0.9Pr0.1O2 catalysts supported on carbon monoliths with complex channels network design prepared by 3D printing for N2O decomposition

  • Martínez López, Iván
  • Martínez-Fuentes, José Clemencio
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
Rh/Ce0.9Pr0.1O2/carbon monolith catalysts have been prepared and tested for N2O decomposition, using 3D printing technology to fabricate carbon supports with different channels geometry including conventional honeycomb design and a nonlinear channel of circular interconnections. The potential penalty in pressure drop of the advanced monolith design has been experimentally ruled out. The activity of the supported catalysts has been successfully tested under simulated N2O/He gas flow and in the presence of O2, NOx and H2O simulating the gas composition in an operating room in a hospital and in a nitric acid production plant, removing in both cases the 96 % of N2O at 375 °C and 400 °C respectively. The behaviour of the catalyst with honeycomb support is improved with the advanced support with the 3D network of nonlinear channels of circular interconnections due to the promotion of gas turbulences that diminish gas diffusion limitations generated in the honeycomb channels, allowing conversion increase by 15 %. The stability of the Rh/Ce0.9Pr0.1O2/carbon monolith catalysts was studied by TGA under air flow and the combustion occurred above 435 °C, indicating that the stability window is high enough for the applications tested in this study. The catalysts characterisation indicated that the active phase loaded on the carbon monoliths is located both in the channels where the reaction gases flow through and into the carbon bulk, while the amount located into the carbon bulk generates certain diffusion limitations in the catalytic tests. The accumulation of active phase in the channels is favoured by increasing the active phase loading.