Pasar al contenido principal

Micro and nano technologies applied to the integration functional materials and their devices

RYC2022-037016-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel approach to micro-fabricated thermoelectric generators with SrTiO3

  • Santander, Joaquin
  • Martín Fernández, Íñigo
  • Carbonell, Carlos
  • Rodríguez-Iglesias, Alex
  • Fuentes Rodríguez, Laura
  • Fernández-Regúlez, Marta
  • Abad Muñoz, Llibertat
  • Lopeandía, Aitor
  • Chatterjee, Arindom
  • Pryds, Nini
  • Fonseca, Luis
  • Salleras Freixes, Marc
The growing demand for autonomous, sustainable, and delocalized power sources for low-power-consuming electronic devices is driving a significant research effort on energy harvesting technologies. Among these, micro-thermoelectric generators (µTEGs) emerge as an appealing solution because of the abundance of residual latent heat sources. This paper proposes an approach to combine high-performance thermoelectric oxides with Si-based µTEGs, leveraging the miniaturization and high-density integration of CMOS-like technologies. The approach is applied to the integration of niobium-doped strontium titanate (Nb:STO) thin films on Si-based planar µTEG structures. The Nb:STO-based µTEG achieves a specific power density Γ = 0.36 nW·cm-2·K-2 under controlled temperature gradients, which is below state-of-the-art performance probably due to lower electrical conductivity from polycrystalline growth. When the chips were tested under realistic operating conditions - placed on a hot surface at 175°C - a maximum power output of p = 0.07 nW was obtained. Nonetheless, by implementing a technological solution for thermal dissipation, the temperature gradient across the thermoelectric material improved by a factor of 110, resulting in a significantly higher extracted power of p = 7.75 nW., The research leading to these results has received funding from the European Union’s H2020 Programme under Grant Agreement no 824072 – HARVESTORE. Also supported by the project ThinTEG (PID2022-142003OB-C22) financed by MCIN/AEI/10.13039/501100011033/FEDER, UE, by the European Social Fund Plus (ESF+) through grants RYC2022-038370-I and RYC2022-037016-I, and by CEX2023-001397-M, financed by MICIU/AEI/10.13039/501100011033. This work acknowledges the financial support from the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) of the Generalitat de Catalunya (2021 SGR 00497). This research has used the Spanish ICTS Network MICRO-NANOFABS, partially funded by FEDER funds through MINATEC-PLUS-2 project FICTS2019-02–40., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary Information: A novel approach to micro-fabricated thermoelectric generators with SrTiO3

  • Santander, Joaquin
  • Martín Fernández, Íñigo
  • Carbonell, Carlos
  • Rodríguez-Iglesias, Alex
  • Fuentes Rodríguez, Laura
  • Fernández-Regúlez, Marta
  • Abad Muñoz, Llibertat
  • Lopeandía, Aitor
  • Chatterjee, Arindom
  • Pryds, Nini
  • Fonseca, Luis
  • Salleras Freixes, Marc
We present a versatile microfabricated platform to assess thermoelectric performance of diverse thin films, enabling sustainable energy harvesting solutions for IoT and autonomous devices., The growing demand for autonomous, sustainable, and delocalized power sources for low-power-consuming electronic devices is driving a significant research effort on energy harvesting technologies. Among these, micro-thermoelectric generators (µTEGs) emerge as an appealing solution because of the abundance of residual latent heat sources. This paper proposes an approach to combine high-performance thermoelectric oxides with Si-based µTEGs, leveraging the miniaturization and high-density integration of CMOS-like technologies. The approach is applied to the integration of niobium-doped strontium titanate (Nb:STO) thin films on Si-based planar µTEG structures. The Nb:STO-based µTEG achieves a specific power density Γ = 0.36 nW·cm−2·K−2 under controlled temperature gradients, which is below state-of-the-art performance probably due to lower electrical conductivity from polycrystalline growth. When the chips were tested under realistic operating conditions – placed on a hot surface at 175°C – a maximum power output of p = 0.07 nW was obtained. Nonetheless, by implementing a technological solution for thermal dissipation, the temperature gradient across the thermoelectric material improved by a factor of 110, resulting in a significantly higher extracted power of p = 7.75 nW., The work was supported by the Agencia Estatal de Investigación [CEX2023-001397-M]; Agencia Estatal de Investigación [PID2022-142003OB-C22]; Agència de Gestiód’Ajuts Universitaris ide Recerca [2021 SGR 00497]; European Regional Development Fund [FICTS2019-02–40]; European Social Fund Plus [RYC2022-037016-I]; European Social Fund Plus [RYC2022-038370-I]; H2020 Future and Emerging Technologies [824072]., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed