Pasar al contenido principal

Exploring Frontiers in Particle Physics Research

RYC2023-044327-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The influence of pixel cell layout on the timing performance of 3D sensors

  • Lasaosa, Clara
  • Duarte Campderros, J.
  • Fernández-García, Marcos
  • Gómez, Gervasio
  • Vila, Iván
  • Hidalgo, Salvador
  • Pellegrini, Giulio
Trabajo presentado al 20th Anniversary Trento Workshop on Advanced Silicon Radiation Detectors (TREDI2025), celebrado del 4 al 6 de febrero de 2025 en Trento, Italy., Three-dimensional (3D) pixel sensors are a promising technology for implementing the 4D-tracking paradigm in high-radiation environments. Despite their advantages in radiation tolerance, 3D pixel sensors exhibit non-uniform electric and weighting fields that can degrade timing performance. This study explores the impact of pixel cell geometry on the timing characteristics of 3D columnar-electrode sensors fabricated by IMB-CNM, comparing square and hexagonal layouts. The sensors were characterized using the Two-Photon Absorption Transient Current Technique (TPA-TCT), providing high-resolution three-dimensional maps of the Time-of-Arrival (ToA) of charge carriers. Measurements at multiple depths and bias voltages reveal that the square geometry yields a more uniform temporal response compared to the hexagonal configuration. Additionally, a novel TPA-TCT-based method was introduced to determine the sensor jitter, relying on the analysis of the time difference between consecutive pulses in the TPA-TCT pulse train acquired under identical conditions. These findings underline the importance of pixel design optimization for future 4D-tracking detectors and confirm the TPA-TCT method as a powerful tool for detailed timing characterization., This work was partially supported by the AIDAInnova project, funded by the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement No. 101004761. Additional funding was provided through Grants PID2023-148418NB-C41 and PID2023-148418NB-C42, financed by MCIN/AEI/10.13039/501100011033, and by the Complementary Plan in Astrophysics and HighEnergy Physics (CA25944), project C17.I02.P02.S01.S03 CSIC, supported by the Next Generation EU funds, RRF and PRTR mechanisms, and the Government of the Autonomous Community of Cantabria. This work has also received partial support from the Spanish Ministry of Science and Innovation through the Ramón y Cajal Programme [RYC2023-044327-I]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of neutron irradiation on LGADs with broad multiplication layer and varied carbon-enriched doses: A study on timing performance and gain deterioration

  • Navarrete Ramos, Efrén
  • Villegas, Jairo
  • Duarte Campderros, J.
  • Fernández-García, Marcos
  • Gómez-Carrera, A.
  • Gómez, Gervasio
  • González, Javier
  • Hidalgo, Salvador
  • Jaramillo, R.
  • Martínez Ruiz del Arbol, P.
  • Merlos Domingo, Ángel
  • Quintana San Emeterio, Cristian
  • Vila, Iván
Data will be made available on request., In this radiation tolerance study, Low Gain Avalanche Detectors (LGADs) with a carbon-enriched broad and shallow multiplication layer were examined in comparison to identical non-carbonated LGADs. Manufactured at IMB-CNM, the sensors underwent neutron irradiation at the TRIGRA reactor in Ljubljana, reaching a fluence of 2.5 × 1015 neq cm-2. The results revealed a smaller deactivation of Boron and improved resistance to radiation in carbonated LGADs. The study demonstrated the potential benefits of carbon enrichment in mitigating radiation damage effects, particularly the acceptor removal mechanism, reducing the acceptor removal constant by more than a factor of two. Additionally, time resolution and collected charge degradation due to irradiation were observed, with carbonated samples exhibiting better radiation tolerance. A noise analysis focused on baseline noise and thermally generated pulses showed the presence of spurious thermal-generated pulses attributed to a excessive small distance between the gain layer end and the p-stop implant at the periphery of the pad for the characterized LGAD design; however, the operation performance of the devices was unaffected., This work was developed in the framework of the CERN DRD3 collaboration and has been funded by the Spanish Ministry of Science and Innovation (MICIU/AEI/10.13039/501100011033/) and by the European Union’s ERDF program “A way of making Europe”. Grant references: CEX2023-001397-M, PID2023-148418NB-C41, PID2023-148418NB-C42, PDC2023-145925-C31 and PDC2023-145925-C32. Also, it was supported by the European Union’s Horizon 2020 Research and Innovation funding program (Grant Agreement No. 101004761, AIDAInnova)., This work has also been supported by the European Union NextGenerationEU/PRTR project C17.I02.P02 - SGI_GICS_Nuevas actuaciones en grandes infraestructuras de investigación europeas e internacionales, the Complementary Plan in Astrophysics and High-Energy Physics (CA25944), project C17.I02.P02.S01.S03 CSIC CERN, funded by the Next Generation EU funds, RRF and PRTR funds, and the Autonomous Community of Cantabria., This work has been developed in the framework of the Grant RyC-2023-044327-I funded by the Spanish Ministry of Science, Innovation and Universities (MICIU/AEI/10.13039/501100011033) and by FSE+, and co-funded by the European Social Fund program “El FSE invierte en tu futuro” with grant reference: PRE2019-087514., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tracking and timing measurements on irradiated TI-LGADs

  • Gómez-Carrera, A.
  • Diehl, L.
  • Duarte Campderros, J.
  • Fernández-García, Marcos
  • Gkougkousis, V.
  • Hiti, B.
  • Kramberger, G.
  • Macchiolo, A.
  • Padniuk, Y.
  • Puklavec, M.
  • Torres Muñoz, Carmen
  • Velkovska, I.
  • Vila, Iván
21st Trento Workshop on Advanced Silicon Radiation Detectors (TREDI 2026), Trench-isolated (TI) LGADs, developed at FBK, are pixelated LGAD implementations where pads are separated by physical trenches etched within the silicon substrate and filled with a dielectric material. Developed as a solution to the LGAD fill factor problem, this technology provides a path towards 4D tracking with reduced inefficiencies in the interpad regions. Through a dedicated 120 GeV SPS pion test beam campaign, the time resolution, efficiency, and inter-pad distance of carbon infused irradiated TI-LGADs is presented. Fluences up to 2.5 × 1015 neqcm-2 are evaluated, for single trench implementations with varied trench width at a temperature of -25°C. The results show an interpad distance degradation with the irradiation of the detector and an optimal time resolution between 35 ps and 45 ps for all studied devices., This work was supported by the Programa de Ayudas Predoctorales Concepción Arenal of the University of Cantabria, co-funded by the Government of Cantabria. It was also co-funded by the Complementary Plan in Astrophysics and High-Energy Physics (CA25944), project C17.I02.P02.S01.S03 CSIC CERN, supported by the Next Generation EU funds, RRF and PRTR mechanisms, and the Government of the Autonomous Community of Cantabria. This work was developed within the framework of the CERN DRD3 collaboration and was funded by the Spanish Ministry of Science, Innovation and Universities (MICIU/AEI/10.13039/501100011033) and by the European Regional Development Fund (ERDF) program “A way of making Europe” under Grant PID2023-148418NB-C41. Additional support was provided by the European Union’s Horizon 2020 Research and Innovation Programme through AIDAinnova (Grant Agreement No. 101004761). This work also received support from the European Union NextGenerationEU/PRTR project C17.I02.P02 – SGI_GICS_Nuevas actuaciones en grandes infraestructuras de investigación europeas e internacionales, and from Grant RyC-2023-044327-I funded by MICIU/AEI/10.13039/501100011033 and by FSE+, co-funded by the European Social Fund program “El FSE invierte en tu futuro”, as well as grant PRE2019-087514. This work was supported by Grant CSN2024-154303 funded by MICIU/AEI/10.13039/501100011033., Peer reviewed