Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low-cost variable-speed wind turbines design by recycling small electrical machines. Arrangement of permanent magnets in the rotor

  • Ballestín-Bernad, V.
  • Artal-Sevil, J.
  • Domínguez-Navarro, J. A.
  • Bernal-Agustín, J. L.
This paper describes the design of low-cost variable-speed wind turbines by recycling small electrical machines. In this way, electrical machines such as automobile claw-pole alternators, induction motors for domestic applications, or simply electric motors for some industrial applications are studied, considering their reuse as permanent magnet synchronous generators (PMSG) in small wind turbines or hydro-power turbines. The main purpose is the integration of hybrid energy conversion systems (wind and hydraulic turbines) in small stand-alone microgrids within the rural environment. Likewise, in order to optimize the design, the arrangement of the permanent magnets in the rotor is analyzed. The analysis has been carried out using the FluxMotor simulation software, which is based on the 2D finite element method. At the same time, the FEM software provides a lot of information about the optimization of the electrical machine and its multiple design options and topologies. Suggested designs have similar performance as well as a similar size and weight. The purpose has been to explore different topologies and select the most efficient designs. In this way, it is shown that it is possible to reuse an electrical generator easily, without losing much of the general performance. © 2022, European Association for the Development of Renewable Energy, Environment and Power Quality (EA4EPQ). All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimal Operation of a Distributed Generation Microgrid based on the Multi-Objective Genetic Algorithms

  • Oviedo-Carranza, S.
  • Artal-Sevil, J.
  • Domínguez-Navarro, J. A.
This document describes the application of multi-objective genetic algorithms as techniques and tools to optimize generation and distribution in small microgrids. In this way, genetic algorithms have been used for the allocation of distributed generation to reduce losses and improve the voltage profile. The IEEE14 network has been taken as a study and analysis model. This smart grid has 14 nodes and integrates several generation units, both conventional and renewable, transformers, and multiple loads. In this way, a multi-objective metaheuristic algorithm is proposed with the purpose of planning the power distribution grid based on a series of conditions such as the optimal generation configuration, the minimization of power losses in the lines, power transfer capacity, the reduction of CO2 emissions, and the optimization of the benefits obtained in renewable generation. The overall purpose is the development of an intelligent microgrid management system that is capable of determining the optimal configuration, by estimating demand, energy costs, and operating costs. © 2022, European Association for the Development of Renewable Energy, Environment and Power Quality (EA4EPQ). All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ocean Wave Energy Converters: Analysis, Modeling, and Simulation. Some case studies

  • El-Shalakany, H.
  • Artal-Sevil, J.
  • Ballestín-Bernad, V.
  • Domínguez-Navarro, J. A.
Wave energy has much more potential and benefits than other forms of renewable energy. It is more predictable, consistent, and controllable than wind or solar energy. In this way, an adequate infrastructure can be an alternative and also sustainable system for power supply. In this paper, different wave energy conversion mechanisms (buoys, Pelamis, and oysters) have been described. These models are implemented and simulated using the Design Modeller, ANSYS-AQWA, and WEC-SIM applications. The purpose has been to develop a complete simulation of the wave energy converter and discuss its operation. The analysis has been developed in Matlab-Simulink and both regular and irregular waves have been considered. For this, an approximation to the linear waves theory has been used. The results obtained indicate the energy absorbed from the sea waves and also the energy supplied to the power grid. The simulation results estimated with the different WEC models are comparable to the results shown by other research papers. © 2022, European Association for the Development of Renewable Energy, Environment and Power Quality (EA4EPQ). All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis and Implementation of different non-isolated Partial-Power Processing Architectures based on the Cuk Converter

  • Artal Sevil, Jesús Sergio
  • Anzola, Jon
  • Ballestín Bernad, Víctor
  • Bernal Agustín, José Luis
This paper presents the analysis and study of different partial-power processing architectures based on the Cuk converter. Thus, the non-isolated topologies analyzed have been considered operative as voltage source converter (VSC). Likewise, the study of the converters is based on the continuous conduction mode (CCM). The partial-power topology has some advantages, such as high power density, small size, the decreased voltage in semiconductor devices, etc., this is because the DC-DC converter only processes a fraction of the total power. The purpose has been to compare the different topologies, Full-Power, Partial-Power, and hybrid-converters, in order to observe the advantages and drawbacks in each case. Among the parameters to be studied is the voltage stress in semiconductors as well as the voltage gain in each architecture. The effectiveness of these new converter architectures has been validated by the Matlab/Simulink software simulation. In this way, different simulation results are presented and analyzed throughout the paper. The purpose of this paper has been to study and explore the usefulness of the non-isolated Cuk converter with partial-power processing architecture for industrial power applications.