Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Providing a Common Approach to Designing Dataset-Based Learning Activities Based on a Literature Review

  • Díaz-Pérez, Lucía
  • Lopez-Pellicer, Francisco J.
  • Brufau, Pilar
  • Lacasta, Javier
  • Trillo-Lado, Raquel
  • Yagüe-Fabra, José A.
  • Zarazaga-Soria, Francisco Javier
While there are references available in the literature regarding learning experiences with Dataset-Based Learning (DBL) approaches, there is a noticeable absence of a standardized model for designing DBL activities. This gap was identified in this work after performing a systematic literature review (SLR). In contrast to other active learning methodologies, the lack of a common framework for the DBL methodology makes it challenging to compare different DBL approaches. This paper highlights the knowledge gap in the methodology for designing DBL activities and aims to provide a common approach for sharing the view and details about what DBL entails in higher education and how to design a DBL activity. Additionally, we illustrate these concepts with three case studies in different engineering fields. Based on the SLR results and the review of additional literature, this work defines DBL as an active teaching methodology that focuses on using datasets to promote the learning and understanding of specific concepts and skills. These datasets should contain real data presented in different formats. As a common starting point, in a DBL lesson, the dataset not only provides information and context in the activity statement but also serves as the material to work with, and the solution to the activity is entirely extracted from the information contained in the dataset.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Integrating Lean and Automation for Enhanced Serology Diagnosis Efficiency in Tertiary Healthcare Microbiology Laboratories

  • Acero, Raquel
  • Torralba, Marta
  • Valverde, Emilio-David
  • Roc, Lourdes
  • Rezusta, Antonio
Healthcare services and institutions are focused on providing the most appropriate medical service in terms of patient safety and satisfaction outcomes. According to Lean methodologies, effectiveness and efficiency can be improved by assuring value-added processes. This article presents a joint approach for the development and implementation of Lean techniques combined with Total Laboratory Automation (TLA) for serology diagnosis in a microbiology laboratory in a tertiary-level hospital. The results obtained show an improvement in the process efficiency and its key performance indicators. In particular, for the HIV and COVID tests, the process Turnaround Times (TAT) were decreased by up to 87.3% and 19.3%, having a direct effect in the diagnostic response time. The process added-value for HIV tests increased by 81%. This meant a cost reduction per test, a higher number of diagnostic tests and clinical samples processed and laboratory resource optimisation. The implementation of TLA also enabled the reallocation of skilled labour towards value-added tasks, increased the process quality and reduced sample waiting times. This work opens up new opportunities for their deployment in other laboratory areas and sample types, directly influencing the overall quality of patient diagnosis in the context of tertiary healthcare facilities.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence analysis of three different camera calibration methods on a camera-projector measuring system

  • Tiscareño Felix, Julieta
  • Albajez Garcia, Jose Antonio
  • Santolaria Mazo, Jorge
The challenges arising from mass production with high quality level require advanced error measurement systems and optical metrology systems. Nowadays, it is more frequent to find this type of controls at the manufacturing industry into the quality control procedures as long as the need for a faster capture speed and precision has increased. However, these techniques can be improved. The accuracy of 3D measurement systems formed by a camera-projector pair depends directly on the calibration procedure used. The projector is usually modelled as the inverse projection of a pin-hole camera, which presents the option to calibrate the system by two different approaches: as a whole system or separately. The most common approach is the use of a camera previously calibrated, followed by the calibration of the projector. Studies show that the uncertainty of the camera parameters from its calibration propagates to the projector parameters and several authors conclude that the three most widespread are: Tsai, Zhang and Direct Linear Calibration. The objective of this study is to have a clear comprehension of the relationships between the camera and projector parameters and of how uncertainty is propagated to the measurement system error. Therefore, the three calibration methods previously mentioned and some of them possible combinations are analyzed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development of a six-degree-of-freedom analog 3D tactile probe based on non-contact 2D sensors

  • Albajez, José Antonio
  • Velázquez, Jesús
  • Torralba, Marta
  • Díaz-Pérez, Lucía C.
  • Yagüe-Fabra, José Antonio
  • Aguilar, Juan José
In this paper, a six-degree-of-freedom analog tactile probe with a new, simple, and robust mechanical design is presented. Its design is based on the use of one elastomeric ring that supports the stylus carrier and allows its movement inside a cubic measuring range of ±3 mm. The position of the probe tip is determined by three low-cost, noncontact, 2D PSD (position-sensitive detector) sensors, facilitating a wider application of this probe to different measuring systems compared to commercial ones. However, several software corrections, regarding the size and orientation of the three LED light beams, must be carried out when using these 2D sensors for this application due to the lack of additional focusing or collimating lenses and the very wide measuring range. The development process, simulation results, correction models, experimental tests, and calibration of this probe are presented. The results demonstrate high repeatability along the X-, Y-, and Z-axes (2.0 µm, 2.0 µm, and 2.1 µm, respectively) and overall accuracies of 6.7 µm, 7.0 µm, and 8.0 µm, respectively, which could be minimized by more complex correction models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

New fast micro-topography estimation algortihms for 5 axis milling

  • Zekalmi, Yasser
  • Albajez, José Antonio
  • Aguado, Sergio
  • Oliveros, María José
Accurately predicting the topography of machined surfaces is vital in industries like aerospace, automotive, and biomedical manufacturing. This paper introduces a novel methodology for fast and precise areal surface microtopography prediction in 5-axis CNC milling, particularly for finishing processes using ball-end milling tools. Although commercial CAM software can predict the macro-topography of a machined surface, incorporating the cutter edge geometry and its rotational movement is essential for accurately predicting the surface’s microtopography. In this work, three alternative algorithms based on the Z-Map method are proposed: (1) a parallelized version of Z-Map (MOD1) for increased computational efficiency, (2) a swept surface technique (MOD2) for more accurate simulations, and (3) a rounding technique (MOD3) for rapid, precise topography prediction by aligning cutter edge points. The user can choose one of the three algorithms based on computational resources and preferences. These are validated through experimental tests on a 5-axis milling machine under different machining conditions. The results demonstrate that the developed algorithms enhance the prediction of the machined surface’s micro-topography, significantly reducing computation time and improving accuracy compared to the traditional Z-map method
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Efficient topography simulation for freeform surfaces in 5-axis CNC milling

  • Zekalmi, Yasser
  • Albajez, José Antonio
  • Oliveros, María José
  • Aguado, Sergio
Accurate prediction of surface micro-topography in 5-axis CNC milling is essential for achieving high-quality finishes in aerospace, biomedical, and precision engineering components. Traditional simulation methods like the Classical Z-Map often suffer from high computational cost and limited applicability to freeform surfaces. This paper presents RMAP, a fast and vectorized algorithm that enhances the Classical Z-Map by projecting cutter edge points in a locally transformed coordinate system aligned with the surface normal. The method supports arbitrary machining strategies exported from CAM software and is compatible with both ideal and realistic cutter edge geometries. Simulations were performed on a hyperbolic paraboloid surface using tool paths generated in NX CAM and validated experimentally on aluminum. RMAP achieved speedups up to 100x compared to Classical Z-Map, with relative errors below 6\% for key areal experimental parameters Sa and Sq. Notably, simulations incorporating realistic cutter edge imperfections, modeled with a stochastic distribution, accurately reproduced short-wavelength directional features observed in experimental measurements. The algorithm proved robust across multiple strategies, including 3-axis and 5-axis configurations with variable feed rates. By maintaining accuracy on complex freeform geometries and significantly reducing computation times, RMAP enables reliable and scalable topography simulation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Kinematic modelling and volumetric error compensation of a 3-axis machine tool using a telescopic simultaneous ballbar

  • Aguado, Sergio
  • Pueo, Marcos
  • Acero, Raquel
  • Brosed, Francisco Javier
  • Santolaria, Jorge
  • Aguilar, Juan José
Volumetric verification (VV) is an effective method for improving the machining accuracy of three and five-axis machine tools (MTs). This paper presents the volumetric verification and error compensation procedure of a medium-sized 3-axis machine tool using a telescopic simultaneous ballbar (TSB). The paper presents the MT kinematic model, the error compensation process with the TSB and the validation in the MT selected. A two-phase optimisation was chosen, in which the squareness and linear errors were calculated together, while in a second phase the rotational errors were identified. A relevant aspect of the work is to evaluate the impact of influencing factors on the verification, such as the location and measurement uncertainty of the measuring system (TSB), the distribution of the points to be verified and the data filtering process. The average volumetric error is reduced by 79.8% in the line verification for a given work area and by 41.7% in a grid considering a global distribution of the MT working volume. The results obtained by the laser interferometer after compensation of the x-axis position error confirm that this technique effectively improves the MT accuracy, with maximum errors of 5 μm and 7 μm for the verification line and grid, respectively. The implemented algorithms are efficient and robust, and the results obtained using the TSB show a global correction of the MT over the entire working area.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Topography prediction in 5 axis milling of free form surfaces based on a realistic cutter edge and a new efficient algorithm

  • Zekalmi, Yasser
  • Aguado, Sergio
  • Oliveros, María José
  • Albajez, José Antonio
Predicting machined surface micro-topography in 5-axis milling of freeform surfaces remains difficult because the generated texture is governed by the combined effects of tool motion, local surface curvature, and the actual condition of the cutting edge. Existing N-buffer, swept-envelope, and Z-Map-based approaches commonly require a compromise between geometric fidelity and computational cost, particularly when realistic cutter-edge microgeometry must be represented over large micrometric-resolution surface areas. This work introduces the u and v rasterization map (UVRMAP), a simulation framework that couples automated cutter-edge extraction from high-resolution 3D measurements with a vectorized projection algorithm formulated in the intrinsic parametric domain of the nominal surface. Ideal, modeled, and experimentally reconstructed cutter edges can be incorporated, including edge-hone variations, wear flats, micro-defects, and stochastic irregularities. During simulation, the discretized cutting edge is rotated along the interpolated 5-axis tool path and projected onto the surface coordinates, allowing efficient computation of the resulting topography while preserving tooth-level geometric detail. The framework was experimentally validated on machined freeform surfaces by comparing measured topographies with simulations generated using ideal, modeled, and real extracted cutter edges. The results show that realistic cutter-edge descriptions improve the reproduction of fine surface marks and wear-induced height variations. UVRMAP also enables micrometric simulation over large freeform areas with around two orders of magnitude acceleration compared with classical Z-Map implementations. The proposed framework therefore provides an efficient and experimentally validated link between cutter-edge condition, 5-axis tool motion, and surface topography generation in precision finishing operations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thermal imaging–assisted neural network modeling for accurate tool wear prediction in dry turning of grey cast iron

  • Pueo, Marcos
  • Acero, Raquel
  • Aguado, Sergio
  • Majarena, Ana Cristina
  • Santolaria, Jorge
Accurate tool wear monitoring is crucial for machining efficiency and product quality, yet traditional statistical methods often fail to capture complex non-linear interactions. This study addresses these limitations by employing Artificial Intelligence (AI), specifically a Multi-Layer Perceptron (MLP) artificial neural network, for tool wear prediction. Experiments involved dry turning of grey cast iron under several cutting parameters, acquiring machining real-time temperature data with an infrared thermal camera and measuring tool flank wear (VB). Statistical analyses in this study revealed that, although correlations between tool wear and temperature exist, regression models exhibited high variability in predictive performance, with coefficients of determination (R2) ranging from 11.6% to over 95%. This underscores the inability of conventional approaches to fully model the complex relationships. The developed network, with hyperparameters optimized through Design of Experiments tool, however, demonstrated high predictive capabilities. For fixed cutting conditions, it achieved a correlation coefficient (R) of 0.999 and Mean Square Error (MSE) of 5.55E-05. For generalized prediction across a wider range of conditions, the optimal network configuration yielded an R of 0.998 and an MSE of 8.62E-05. To ensure consistency of the modeĺs performance and prevent over-parameterization, k-fold cross-validation and early stopping criterion were used. This work confirms infrared thermography’s reliability and justifies the use of neural networks to overcome the shortcomings of traditional statistical analyses. The AI-driven approach effectively models intricate variable relationships, offering a robust and precise solution for real-time tool wear monitoring and optimization in industrial machining.