Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly efficient heterogeneous modal superposition method for the full-wave analysis of arbitrarily shaped H-plane structures fed through rectangular waveguides

  • Belenguer Martínez, Ángel
  • Lucas Borja, Alejandro
  • Cascón López, Joaquín
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
A new fully modal characterisation procedure is proposed to reduce the number of unknowns needed to characterise the ports of an arbitrary H-plane device in rectangular waveguide, so that no equivalent currents will be involved in the characterisation of the ports. Moreover, since no currents are needed to characterise the ports, the weights of the scattered modes can be unknowns of the resulting system of equations. This is an important fact, since, to find the wanted modal weights, a subsequent projection step is not necessary anymore. The new method is then advantageous when compared to other hybrid alternatives in the literature, not only because the ports are solved using fewer unknowns, which is the main advantage of the proposal, but also because the scattering parameters can be computed directly, once the system of equations is posed., This work was supported by Ministerio de Ciencia e Innovacion, Spanish Government, under Research Project TEC2007-67630-C03-01 and by the Autonomous Government of Castilla-La Mancha under Research Project PPII10-0047-0220.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multipactor discharges in parallel-plate dielectric-loaded waveguides including space-charge effects

  • Coves, A.
  • Torregrosa-Penalva, G.
  • Vicente, C.
  • Gimeno, B.
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The objective of this paper is to study the time evolution of multipactor discharges in a parallel-plate dielectric-loaded waveguide. The electron discharge phenomena investigated in this paper include the effects of space charge, as well as the presence of time varying static fields. In order to perform the simulations presented in this paper, an approach considering simultaneously multiple effective electrons has been used. The results obtained demonstrate that multipactor discharges do turn off by themselves under certain circumstances when they occur in such dielectric-loaded structures., This work was supported by the Spanish Government's Ministerio de Educacion y Ciencia under Project TEC2007-67630-C03-01. The review of this paper was arranged by Editor W. Menninger.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Análisis del efecto multipactor en guías de onda de geometría cilíndrica

  • Pérez Pastor, Antonio María
[ES] El propósito de la presente tesis es desarrollar una herramienta informática para la predicción del efecto multipactor tanto en líneas de transmisión coaxiales como en guías circulares. Esta herramienta está pensada para ser complementaria de las de diseño asistido por ordenador Computer-Aided Design (CAD) en el caso de dispositivos de comunicaciones a implementar en estas tecnologías de ondas guiadas. En el caso de guías coaxiales, se desarrollará un modelo numérico para la predicción de los umbrales de potencia del fenómeno de multipactor. Este método ha sido validado con medidas experimentales, así como validado con otros estudios teóricos realizados. En este tipo de guía se ha considerado tres tipos de señal de radio frecuencia (RF), la onda incidente, la onda estacionaria pura y las ondas estacionarias en general (combinación de ondas incidente y reflejada de distintas amplitudes). Así pues, se ha analizado y obtenido los umbrales de potencia para cada una de las diferentes señales consideradas y observado los efectos que se producen. En las guías circulares, se ha demostrado en primer lugar la existencia del fenómeno de multipactor bajo la excitación del modo fundamental de la guía circular TE11. El interés en estas guías se debe al amplio uso en la fabricación de componentes pasivos, tanto en cavidades resonantes como el uso de irises que conectan las cavidades, empleados tanto en aceleradores de partículas como en diferentes subsistemas de comunicaciones en satélites. Por tanto, además de observar la existencia del efecto multipactor hemos calculado una carta de susceptibilidad para dicho fenómeno, inicialmente en el caso de que sólo se transmita una única polarización, en concreto la polarización vertical. Una vez hemos demostrado que el efecto multipactor es posible en estas guías circulares, se ha realizado un estudio teniendo en consideración la coexistencia de las dos polarizaciones del modo fundamental TE11. Para una mejor comprensión del fenómeno, se ha analizado inicialmente para órdenes de multipactor más bajos en función de la excentricidad de la elipse de polarización. Prestando especial atención para el caso de la polarización lineal y circular, aunque también se ha analizado otras combinaciones más generales., [CA] El propòsit de la present tesi és desenvolupar una eina informàtica per a la predicció de l'efecte multipactor tant en línies de transmissió coaxials com en guies circulars. Aquesta eina està pensada per a ser complementària de les de disseny assistit per ordinador Computer- Aided Design (CAD) en el cas de dispositius de comunicacions a implementar en aquestes tecnologies d'ones guiades. En el cas de guies coaxials, es desenvoluparà un model numèric per a la predicció dels llindars de potència del fenomen de multipactor. Aquest mètode ha sigut validat amb mesures experimentals, així com validat amb altres estudis teòrics realitzats. En aquesta mena de guia s'ha considerat tres tipus de senyal de ràdio freqüència (RF), l'ona incident, l'ona estacionària pura i les ones estacionàries en general (combinació d'ones incident i reflectida de diferents amplituds). Així doncs, s'ha analitzat i obtingut els llindars de potència per a cadascuna dels diferents senyals considerats i observat els efectes que es produeixen. En les guies circulars, s'ha demostrat en primer lloc l'existència del fenomen de multipactor sota l'excitació de la manera fonamental de la guia circular TE11. L'interés en aquestes guies es deu a l'ampli ús en la fabricació de components passius, tant en cavitats ressonants com l'ús d'irises que connecten les cavitats, emprats tant en acceleradors de partícules com en diferents subsistemes de comunicacions en satèllits. Per tant, a més d'observar l'existència de l'efecte multipactor hem calculat una carta de susceptibilitat per a aquest fenomen, inicialment en el cas que només es transmeta una única polarització, en concret la polarització vertical. Una vegada hem demostrat que l'efecte multipactor és possible en aquestes guies circulars, s'ha realitzat un estudi tenint en consideració la coexistència de les dues polaritzacions de la manera fonamental TE11. Per a una millor comprensió del fenomen, s'ha analitzat inicialment per a ordres de multipactor més baixos en funció de l'excentricitat de l'ellipse de polarització. Prestant especial atenció per al cas de la polarització lineal i circular, encara que també s'ha analitzat altres combinacions més generals., [EN] The main goal of this PhD thesis is to develop a computer tool for the prediction of the multipactor effect, both in coaxial transmission lines and in circular guides. This tool is intended to be complementary to the available Computer-Aided Design (CAD) versions, in particular for the case of communication devices to be implemented in the cited guided wave technologies. In the case of coaxial guides, a numerical model is developed to predict the power thresholds of the multipactor phenomenon. This method has been validated with experimental measurements, as well as with other theoretical studies carried out. In this type of guide, three types of radio frequency (RF) signals have been considered, i.e. the incident wave, the pure standing wave and the standing waves in general (a combination of incident and reflected waves of different amplitudes). Thus, the power thresholds for each of the different signals considered have been analyzed and obtained, and the corresponding effects that occur have been observed. In circular guides, the existence of the multipactor phenomenon under the excitation of the TE11 fundamental mode of the circular guide has been demonstrated first. The interest in these guides is due to their wide use in the manufacture of passive components, both in resonant cavities and within irises that connect the cavities, used both in particle accelerators and in different satellite communications subsystems. Therefore, in addition to observing the existence of the multipactor effect, we have calculated a susceptibility chart for this phenomenon, initially in the case that only a single polarization is transmitted, specifically the vertical polarization. Once we have shown that the multipactor effect is possible in these circular guides, a study has been carried out taking into account the co-existence of the two polarizations of the TE11 fundamental mode. For a better understanding of the phenomenon, it has been initially analyzed for lower multipactor orders as a function of the eccentricity of the polarization ellipse. Special attention has been paid to the case of linear and circular polarization, although other more general combinations have also been analyzed., This work was supported in part by Ministerio de Educación y Ciencia, Spanish Government, under the coordinated Research Project TEC 2007/67630-C03-01 and in part by Generalitat Valenciana (Spain) under Projects IIARC0/2004/20, IIARC0/2004/21 and IIARC0/2004/22. This work has been supported by Ministerio de Ciencia e Innovación, Spanish Government, under Research Project TEC2007-67630-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards the automatic layout synthesis in resonant-type metamaterial transmission lines

  • Selga, J.
  • Rodriguez Perez, Ana Maria
  • Gil, M.
  • Carbonell Olivares, Jorge
  • Martin, F.
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The first approach towards the automatic layout generation of resonant-type metamaterial transmission lines by using space mapping optimisation is reported. Specifically, the so-called aggressive space mapping (ASM) technique is applied for synthesising microstrip lines loaded with complementary split ring resonators (CSRRs). From a certain set of elements of the circuit model of the unit cell of such lines (which is typically derived from system specifications), the topology (layout) of the CSRR-loaded microstrip line, providing the same electromagnetic response as the circuit model (within certain error limits), is generated automatically. This synthesis technique is of paramount importance for the design of metamaterial-based (or inspired) circuits implemented by means of electrically small resonators such as CSRRs and SRRs. Although the reported technique is applied here to the synthesis of a negative permittivity structure (CSRR-loaded line), the basics towards the extension of the technique to other artificial transmission lines are clearly established., This work has been supported by MEC (Spain) through the projects TEC2007-68013-C02 METAINNOVA and TEC2007-67630-C03 CABESERES and by MCI (Spain) through the project EMET CSD2008-00066 of the CONSOLIDER Ingenio 2010 Program. The authors especially thank Generalitat de Catalunya for funding CIMITEC and for supporting GEMMA through the project 2009SGR-421. The Ministerio de Education (Spain) has given an FPU grant to J.S. with reference AP2008-04707.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An efficient integral equation technique for the analysis of arbitrarily shaped capacitive waveguide circuits

  • Quesada Pereira, Fernando Daniel
  • Vera Castejon, P.
  • Alvarez Melcon, Alejandro
  • Gimeno Martinez, Benito
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this contribution a new and efficient integral equation formulation is presented for the analysis of arbitrarily shaped capacitive waveguide devices. The technique benefits from the symmetry of the structure in order to reduce the dimensions of the problem from three to two dimensions. For the first time, this technique formulates the waveguide capacitive discontinuity problem as a 2-D scattering problem with oblique incidence, combined with an efficient calculation of the parallel plate Green's functions. The numerical method allows the efficient evaluation of the electromagnetic fields inside the analyzed structures. Results for different practical capacitive waveguide devices are successfully compared with commercial software tools for validation of the proposed theory. Finally, a novel low-pass filter implementation based on circular conducting posts has been proposed. The field contour lines in the critical gaps of the new structure are curved due to the use of rounded posts. This could result in improved power handling capabilities with respect to standard corrugated low-pass filters. Copyright 2011 by the American Geophysical Union., This work has been developed with financial support from SENECA project reference 08833/PI/08, and CICYT project reference TEC2007-67630-C03.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave corona breakdown prediction in arbitrarily-shaped waveguide based filters

  • Pinheiro-Ortega, T.
  • Monge, J.
  • Marini, S.
  • Sanz, J.
  • Sorolla, E.
  • Mattes, M.
  • Vicente, C.
  • Gil, J.
  • Gimeno, B.
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This letter describes an efficient algorithm to predict the RF gas breakdown power threshold in microwave devices with complex geometries. The two necessary calculations when investigating such a phenomenon have been performed: on the one hand, the computation of the electromagnetic fields inside the structure and, on the other hand, the determination of the breakdown onset itself. The electromagnetic fields are solved by means of modal techniques and coupled to the free electron continuity equation, which is solved by the Finite Element Method. Proceeding in this way, a very simple criterion to find out whether microwave corona breakdown will take place is derived. This numerical implementation of the developed algorithms has been tested with other theoretical approaches and with experimental measurements, showing very good agreement., This work was supported by the Ministerio de Educacion y Ciencia of Spain under Grant TEC2007-67630-C03-01/TCM and the "Programa Torres Quevedo" (PTQ08-03-08254).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Prediction of multipactor breakdown thresholds in coaxial transmission lines for traveling, standing and mixed waves

  • Pérez, Antonio M.
  • Tienda, Carolina
  • Vicente, Carlos
  • Anza Hormigo, Sergio
  • Gil, Jordi
  • Gimeno, Benito
  • Raboso García-Baquero, David
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this paper, we present a numerical model for predicting the multipactor breakdown effect in coaxial transmission lines. To validate this method, we have first compared our results with numerical data from other theoretical studies and with experimental measurements. Then, we have investigated the multipactor phenomena in coaxial lines considering three kinds of RF signals: traveling, standing, and mixed waves. From this paper, we conclude that different breakdown thresholds are obtained for any of the considered RF excitations under high values of frequency x gap product. This effect is attributed to the existence of regions with zero (or very low levels) electric field amplitude in the propagation direction, where electrons are absorbed before the discharge occurs., This work was supported in part by Ministerio de Educacion y Ciencia, Spanish Government, under the coordinated Research Project TEC 2007/67630-CO3-01 and in part by Generalitat Valenciana (Spain) under Projects IIARCO/2004/20, IIARCO/2004/2 1, and IIARCO/2004/22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multipactor analysis in circular waveguides

  • Pérez Pastor, Antonio María
  • Gimeno, B.
  • Anza, S.
  • Vicente, C.
  • Gil, J.
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper mainly focuses on demonstrating that a multipactor discharge can occur within a circular waveguide operating under the fundamental TE11 circular mode. Circular waveguides are widely used in the fabrication of many passive components, in order to implement resonant cavities as well as irises to connect adjacent guides for both application domains, particle accelerators and satellite subsystems applications. Thus, we present the first study of the multipactor effect in a circular waveguide, demonstrating its existence and providing a susceptibility chart for such a structure, which will be of great interest for the better understanding of multipactor physical phenomena., This work has been supported by Ministerio de Ciencia e Innovación, Spanish Government, under Research Project TEC2007-67630-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid Technique Plus Fast Frequency Sweep for the Efficient and Accurate Analysis of Substrate Integrated Waveguide Devices

  • Belenguer Martínez, Ángel
  • Díaz Caballero, Elena
  • Cascón López, Joaquín
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this paper, we adapt a novel mode-matching and method-of-moments hybrid technique to efficiently analyze substrate integrated waveguide (SIW) based devices. The hybrid technique is formulated in terms of a single equivalent current. This fact is used to include the emergent modal weights, i.e., the scattering parameters, as unknowns of the method-of-moments system of equations. In this case, it is relatively easy to develop fast frequency sweep schemes that can be used to highly accelerate the solution of an arbitrary device and, as a result, a very efficient technique is obtained. This technique can be applied to the analysis and design of SIW devices, and it is highly competitive when compared to other method-of-moments and mode-matching hybrid formulations or when compared to reference commercial software. © 2006 IEEE., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Government, under Research Project TEC2007-67630-C03-01 and by the Autonomous Government of Castilla-La Mancha under Research Project PPII10-0047-0220.