Pasar al contenido principal

MODELOS COMPUTACIONALES E INVESTIGACION EXPERIMENTAL EN EL ESTUDIO DE TECNICAS QUIRURGICAS DE CALENTAMIENTO DE TEJIDOS BIOLOGICOS MEDIANTE CORRIENTES DE RADIOFRECUENCIA.

TEC2008-01369

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Could it be advantageous to tune the temperature controller during radiofrequency ablation? A feasibility study using theoretical models

  • Alba Martínez, José
  • Trujillo Guillen, Macarena|||0000-0003-4145-2188
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
  • Berjano, Enrique|||0000-0002-3247-2665
Purpose: To assess whether tailoring the Kp and Ki values of a proportional-integral (PI) controller during radiofrequency (RF) cardiac ablation could be advantageous from the point of view of the dynamic behaviour of the controller, in particular, whether control action could be speeded up and larger lesions obtained. Methods: Theoretical models were built and solved by the finite element method. RF cardiac ablations were simulated with temperature controlled at 55 degrees C. Specific PI controllers were implemented with Kp and Ki parameters adapted to cases with different tissue values (specific heat, thermal conductivity and electrical conductivity) electrode-tissue contact characteristics (insertion depth, cooling effect of circulating blood) and electrode characteristics (size, location and arrangement of the temperature sensor in the electrode). Results: The lesion dimensions and T(max) remained almost unchanged when the specific PI controller was used instead of one tuned for the standard case: T(max) varied less than 1.9 degrees C, lesion width less than 0.2 mm, and lesion depth less than 0.3 mm. As expected, we did observe a direct logical relationship between the response time of each controller and the transient value of electrode temperature. Conclusion: The results suggest that a PI controller designed for a standard case (such as that described in this study), could offer benefits under different tissue conditions, electrode-tissue contact, and electrode characteristics., This work received financial support from the Spanish 'Plan Nacional de I+D+I del Ministerio de Ciencia e Innovacion' Grant no. TEC2008-01369/TEC and FEDER Project MTM2010-14909. The translation of this paper was funded by the Universitat Politecnica de Valencia, Spain. The authors alone are responsible for the content and writing of the paper
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Relationship between roll-off occurrence and spatial distribution of dehydrated tissue during RF ablation with cooled electrodes

  • Trujillo Guillen, Macarena|||0000-0003-4145-2188
  • Berjano, Enrique|||0000-0002-3247-2665
  • Alba Martínez, José
Purpose: To study the relationship between roll-off (sudden increase in impedance) and spatial distribution of dehydrated tissue during RF ablation using a cooled electrode (temperatures around 100°C). Methods: We used a double approach: (1) theoretical modelling based on the finite element method, and (2) 20 ablations using an experimental study on ex vivo excised bovine liver in which we measured impedance progress and temperature at three points close to the electrode surface: 0.5 (T1), 1.5 (T2) and 2.5 (T3) mm from the tip. T2 was located exactly at the centre of the 30 mm long electrode. Results: Temperatures at T1 and T3 quickly rose to 100°C (at ≈20 and 40 s, respectively), while at the rise at T2 was somewhat slower, stabilized around 50 s and reached a maximum value of 99°C at about 60 s. Impedance reached a minimum of 65 Ω (plateau), began increasing at 50 s and continued rising throughout the procedure, reaching a value equal to the initial value at 70 s. Likewise, computed impedance dropped to ≈73 Ω (plateau), began increasing at 50 s and reached an impedance value equal to the initial value at ≈78 s, which approximately coincided with the time when the entire zone surrounding the electrode was within the 100°C isotherm. Conclusion: There is a close relationship between the moment at which roll-off occurs and the time when the entire electrode is completely encircled by the dehydrated tissue. The mid-electrode zone is the last in which tissue desiccation occurs., This work received financial support from the Spanish Plan Nacional de I+D+I del Ministerio de Ciencia e Innovacion, grant no. TEC2008-01369/TEC and FEDER Project MTM2010-14909. The translation of this paper was funded by the Universitat Politecnica de Valencia, Spain. The authors alone are responsible for the content and writing of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Single instrument for hemostatic control in laparoscopic partial nephrectomy in a porcine model without renal vascular clamping

  • Subira Rios, Jorge
  • Sanchez Zalabardo, Jose M.
  • Burdio, Fernando
  • Moros, Manuel
  • Gonzalez, Ana
  • Navarro, Ana
  • Gueemes, Antonio
  • Berjano, Enrique|||0000-0002-3247-2665
[EN] Materials and Methods: We performed a comparative experimental study between a new radiofrequency (RF)-assisted device consisting of a handheld instrument that simultaneously conducts coagulation and cutting tasks without hilar clamping vs a standard technique with hilar clamping. A porcine model was used (10 animals per group) with survival of 17 days. Results: The estimated blood loss with the new device was significantly lower than with the standard technique (15.5 +/- 23.7 vs 79.4 +/- 76.3 mL). Although transection time was longer with the new device (10.7 +/- 13.7 vs 2.1 +/- 1.2 min), the total operative time was significantly shorter (35.3 +/- 13.7 vs 60.2 +/- 10.5 min). Evidence of localized urinary extravasation (urinoma) was identical in both groups (five cases). The group subjected to the new device, however, showed a significantly higher number of cases of leakage after conducting the methylene-blue test: eight (80%) cases vs only one (11%) with the standard technique. Necrosis depth was significantly greater with the new device (6.6 +/- 0.9 vs <1 mm). Conclusions: The experimental results suggest that the proposed RF-assisted device provides adequate hemostatic control during transection of the renal parenchyma without additional instruments or surgical maneuvers and could therefore be a valuable adjunct for LPN without vascular clamping. The device was unsuccessful in effectively sealing the collecting system., This work received financial support from the Spanish "Plan Nacional de I + D + I del Ministerio de Ciencia e Innovacion," Grant No. TEC2008-01369/TEC. The translation of this paper was funded by the Universidad Politecnica de Valencia, Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Applicator for RF Thermokeratoplasty: Feasibility Study Using Theoretical Modeling and Ex Vivo Experiments

  • Trujillo Guillen, Macarena|||0000-0003-4145-2188
  • Berjano, Enrique|||0000-0002-3247-2665
  • Ribera, Vicente
  • Quesada, Rita
Radiofrequency (RF) thermokeratoplasty uses RF currents to alter the curvature of the cornea by means of thermal lesions. An RF applicator which combined a microkeratome suction ring and a circular electrode was designed with the aim of creating circular thermal lesions in a predictable, uniform and safe way. An experimental study was conducted on ex vivo porcine eyes. A theoretical model was also designed. The experimental results showed a lesion depth of 34.2 ± 11.0% of corneal thickness at a constant voltage of 50 V up to roll-off (1000 X of impedance). With a voltage of 30 V for 30 s the mean depth was 36.8 ± 8.1%. The progress of electrical impedance throughout heating and lesion dimensions were used to compare the experimental and theoretical results. Both the impedance evolution and lesion dimensions obtained from the theoretical model showed good agreement with the experimental ¿ndings. The ¿ndings suggest that the new applicator could be a suitable option for creating uniform circular thermal lesions., This work received financial support from the Spanish "Plan Nacional de I+D+I del Ministerio de Ciencia e Innovacion" Grant No. TEC2008-01369/TEC and FEDER Project MTM2010-14909. The translation of this paper was partially funded by the Universitat Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CT mapping of saline distribution after infusion of saline into the liver in an ex vivo animal model. How much tissue is actually infused in an image-guided procedure?

  • Burdio, Fernando
  • Milian, Olga
  • Grande, Luis
  • Poves, Ignasi
  • Silva, Claudio
  • De la Fuente, Maria Dolors
  • Mojal, Sergi
  • Berjano, Enrique|||0000-0002-3247-2665
[EN] Purpose: To track the saline during infusion with a 15 G needle into healthy pig livers at high and low infusion rates for 300 s. Methods: In each experiment, the needle was inserted into a single lobe of the liver to a depth of at least 2 cm following its longer axis. Two sets of experiments were defined: 1) low infusion rate of 0.1 mL/min (n = 6) and 2) high infusion rate of 1 mL/min (n = 6). Cine CT scans were carried out and three transverse planes were defined around the infusion point (IP), which corresponds with needle tip. Two assessments were performed: 1) a dynamic plane study focused on the time progress of the saline distribution on a single plane, which provided the Mean Percentage of Grayscale Intensity (MPG!): and 2) a volumetric study focused on the three dimensional distribution of the saline around IP at the end of the experiment, which provided the High Intensity Volume Ratio (HIVR). Results: The saline solution was conspicuous around the IP and shortly after heterogeneously inside the vessels. At the high infusion rate, the saline became conspicuous not only much sooner (evident at 20 s) but farther away (mean value of MPGI over 2%, up to 17 mm from the IP) and at a much higher intensity (mean value of MPGI over 10% up to 4 mm from the IP). The lower the radial distance to the IP, the greater the difference in HIVR between both groups. Conclusions: The high infusion rate leads to a faster, wider and a more marked presence of saline than the low rate. The rapid drainage into the hepatic veins may explain the heterogeneous distribution. (C) 2012 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved., This work received financial support from the Spanish "Plan Nacional de I+D+I del Ministerio de Ciencia e Innovacion" Grant No. TEC2008-01369/TEC. The translation of this paper was funded by the Universidad Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Laparoscopic Distal Pancreatectomy: Feasibility Study of Radiofrequency-Assisted Transection in a Porcine Model

  • Dorcaratto, Dimitri
  • Burdio Pinilla, Fernando
  • Fondevila, Dolors
  • Andaluz, Anna
  • Poves, Ignasi
  • Martínez, María Ángeles
  • Quesada, Rita
  • Grande, Luis
  • Berjano, Enrique|||0000-0002-3247-2665
Background and Aim: Despite technological improvements in pancreatic surgery, the incidence and morbidity of pancreatic leak after resection of distal pancreas are persistently high in most series. Laparoscopic distal pancreatectomy (LDP) is today the gold standard procedure for benign and certain malignant neoplasms of the pancreatic body and tail in specialized centers. This study evaluated safety and feasibility of a radiofrequency (RF)-assisted transection device in a porcine model of LDP. Materials and Methods: LDP was performed on 10 pigs (median weight, 39.6 kg) using a new device based on an internally cooled RF-assisted electrode (Coolinside (R), Apeiron Medical, Valencia, Spain). The animals were subjected to daily observation and then sacrificed and necropsied at 4 weeks postoperatively. Primary end points were the development of postoperative pancreatic fistula using the Pancreatic Anastomotic Leak Study Group definition and/or the presence of abdominal amylase-rich fluid collections or abscesses during necropsy and pathological study and/or dye extravasation from the pancreatic remnant duct. Secondary end points were intra- or postoperative complications, surgery, and transection duration. Results: No clinically relevant postoperative pancreatic fistulas were observed. In one case a grade A postoperative fistula was diagnosed due to amylase drain concentration of more than 6200 IU/mL on postoperative day 4. Median peritoneal liquid amylase concentration on postoperative day 4 was 2399.0 IU/L (range, 819.2-7122.0 IU/L), similar to the median plasma amylase level of 1520.8 IU/L (range, 1015.3-4056.6 IU/L). Median surgery time was 93.5 minutes (range, 46.0-140.0 minutes), and median transection time was 4.5 minutes (range, 2.0-26.0 minutes). There was one postoperative wound infection. There were no postoperative deaths or major complications. During the histopathological study, the surgical margin of the remaining pancreas showed a common pattern with a central area of necrosis surrounded by granulomatous infiltrate and fibrosis. Ductal obliteration was observed. No purulent inflammatory infiltrate or abscesses were present. Conclusion: Experimental findings suggest that performing pancreatic transection with Coolinside in a animal model of LDP is feasible and safe., This work received financial support from the Spanish "Plan Nacional de I+D+I del Ministerio de Ciencia e Innovacion," grant number TEC2008-01369/TEC, and from the Generalitat Valenciana (Ayudas Complementarias de I+D para Grupos de Calidad ACOMP/2010/008).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Radiofrequency based hyperthermia therapy: A centennial technique serving modern surgery

  • Berjano, Enrique|||0000-0002-3247-2665
  • Romero-Méndez, R.
  • Franco, W.
[ES] El uso de las corrientes eléctricas de radiofrecuencia (RF) para tratar quirúrgicamente enfermedades tan diferentes como por ejemplo el cáncer, las alteraciones del ritmo cardiaco o la hipermetropía ocular es relativamente reciente. Sin embargo, el mecanismo biofísico en que se basan estas técnicas se conoce desde hace más de 100 años. Este artículo de divulgación tiene por objetivo presentar de forma didáctica y sencilla el uso de las corrientes de RF para producir calentamiento en tejidos biológicos con fines terapéuticos y quirúrgicos. En primer lugar se presentan las bases biofísicas en las que se sustenta dicha aplicación, y posteriormente se exponen diferentes ejemplos de aplicación clínica actual de las corrientes de RF., [EN] Although the use of radiofrequency (RF) electric currents to treat very different illnesses by surgical means (e.g. cancer, disturbances in cardiac rhythms, or hyperopia) is very recent, the biophysical phenomena in which these surgical techniques are based has been understood for more than 100 years. The aim of this paper is to didactically present the use of RF currents to heat biological tissues with therapeutic and surgical purposes. First, the underlying biophysics mechanisms of this approach are explained. Next, different examples of recent clinical RF-current based applications are discussed., This work received financial support from the Spanish «Plan Nacional de I+D+I del Ministerio de Ciencia e Innovación», Grant No. TEC2008-01369/TEC. The authors gratefully acknowledge CONACyT (Mexico) for support through project FMSLP-C01-2007-62604 that allowed a technical visit of R. Romero-Méndez to the Universidad Politécnica de Valencia (Spain) and of E.J. Berjano to Universidad Autónoma de San Luis Potosí (México).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Black-box modeling to estimate tissue temperature during radiofrequency catheter cardiac ablation: feasibility study on an agar phantom model

  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
  • Berjano, Enrique|||0000-0002-3247-2665
  • Lequerica, Juan L.
  • Herrero, María
  • Hornero, Fernando
[EN] The aim of this work was to study linear deterministic models to predict tissue temperature during radiofrequency cardiac ablation (RFCA) by measuring magnitudes such as electrode temperature, power and impedance between active and dispersive electrodes. The concept involves autoregressive models with exogenous input (ARX), which is a particular case of the autoregressive moving average model with exogenous input (ARMAX). The values of the mode parameters were determined from a least-squares fit of experimental data. The data were obtained from radiofrequency ablations conducted on agar models with different contact pressure conditions between electrode and agar (0 and 20 g) and different flow rates around the electrode (1, 1.5 and 2 L min¿1). Half of all the ablations were chosen randomly to be used for identification (i.e. determination of model parameters) and the other half were used for model validation. The results suggest that (1) a linear model can be developed to predict tissue temperature at a depth of 4.5 mm during RF cardiac ablation by using the variables applied power, impedance and electrode temperature; (2) the best model provides a reasonably accurate estimate of tissue temperature with a 60% probability of achieving average errors better than 5 °C; (3) substantial errors (larger than 15 °C) were found only in 6.6% of cases and were associated with abnormal experiments (e.g. those involving the displacement of the ablation electrode) and (4) the impact of measuring impedance on the overall estimate is negligible (around 1 °C)., This work was supported by the 'Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica del Ministerio de Educacion y Ciencia' of Spain (TEC200801369/ TEC) and by an R&D contract (CSIC-20060633) between Edwards Lifescience Ltd and the Spanish National Research Council (CSIC). The English revision and correction of this paper was funded by the Universidad Politecnica de Valencia, Spain. We thank L Melecio for his invaluable technical support in conducting the experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrical-thermal performance of a cooled RF applicator for hepatic ablation with additional distant infusion of hypertonic saline: In vivo study and preliminary computer modeling

  • Romero-Méndez, Ricardo
  • Tobajas, Pilar
  • Burdío Pinilla, Fernando
  • González, Ana
  • Navarro Gonzalo, Ana
  • Grande, Luis
  • Berjano, Enrique|||0000-0002-3247-2665
Purpose: The Cool-tip electrode is one of the most widely employed applicators in radiofrequency (RF) hepatic ablation. Previous research demonstrated that it is possible to enlarge coagulation volume when the single cooled electrode is associated with distant infusion of saline (hybrid applicator). The aim of this study was to compare the electrical-thermal behaviour of the Cool-tip electrode with that of the hybrid applicator. Materials and methods: Forty-two RF ablations were performed on a total of 10 pigs: 22 with the Cool-tip electrode and 20 with the hybrid applicator (low infused saline volumetric flow rate of 6 mL/h at 2 mm distance). We compared both electrical performance (delivered power and number of roll-offs, i.e. sudden rises in impedance that interrupt the power delivery) and coagulation zone characteristics. In addition, we built a one-dimensional model to provide a basic physical explanation of the difference in performance between the different applicators. Results: The experimental results showed that the number of roll-offs with the Cool-tip electrode was higher (24.3 3.1 versus 6.7 7.0). The hybrid applicator created larger coagulation volumes (19.7 9.5 cm3 versus 9.5 5.8 cm3 ) with larger transverse diameters (2.5 0.6 versus 1.9 0.5 cm). The one-dimensional model confirmed the delay in the incidence of the first roll-off, but not the heterogeneity of the hybrid applicator’s electrical performance in the experiments. Conclusions: The hybrid applicator produces fewer roll-off episodes than the Cool-tip electrode and creates larger coagulation volumes with larger transverse diameters., This work received financial support from the Spanish Plan Nacional de I_D_i del Ministerio de Ciencia e Innovacion, grants TEC2008-01369/TEC and TEC2011-27133-C02-01. The authors thank CONACyT (Mexico) for support from project CB-2007/84618 that enabled research visits of R. Romero-Mendez to the Universidad Politecnica de Valencia (Spain) and E.J. Berjano to the Universidad Autonoma de San Luis Potosi (Mexico). The translation of this paper was funded by the Universitat Politecnica de Valencia, Spain. F. Burdio and E. Berjano declare an interest (stock ownership) in Apeiron Medical SL, a company which has a licence for the patent application US 2010/137856 A1, on which the hybrid applicator tested in this study is based. The other authors have no conflict of interests or financial ties to disclose. The authors alone are responsible for the content and writing of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analytical Model Based on a Cylindrical Geometry to Study RF Ablation with Needle-Like Internally Cooled Electrode

  • López Molina, Juan Antonio
  • Berjano, Enrique|||0000-0002-3247-2665
  • Rivera Ortun, María José
Radiofrequency (RF) ablation with internally cooled needle-like electrodes is widely used in medical techniques such as tumor ablation. The device consists of a metallic electrode with an internal liquid cooling system that cools the electrode surface. Theoretical modeling is a rapid and inexpensive way of studying different aspects of the RF ablation process by the bioheat equation, and the analytical approach provides an exact solution to the thermal problem. Our aim was to solve analytically the RF ablation transient time problem with a needle-like internally cooled cylindrical electrode while considering the blood perfusion term. The results showed that the maximal tissue temperature is reached 3mm from the electrode, which confirms previous experimental findings. We also observed that the temperature distributions were similar for three coolant temperature values (5 °C, 15 °C, and 25 °C). The differences were only notable in temperature very close to the probe. Finally, considering the 50 °C line as a thermal lesion mark, we found that lesion diameter was around 2cm, which is exactly that observed experimentally in perfused hepatic tissue and slightly smaller than that observed in nonperfused (ex vivo) hepatic tissue. Copyright © 2012 Juan A. Lpez Molina et al., This work received financial support from the Spanish "Plan Nacional de I + D + i del Ministerio de Ciencia e Innovacion" Grant no. TEC2008-01369/TEC. The translation of this paper was funded by the Universitat Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transección hepática sin suturas mediante un nuevo instrumento asistido por radiofrecuencia. Modelado teórico, estudio experimental y ensayo clínico, Sutureless hepatic transection using a new radiofrequency assisted device. Theoretical model, experimental study and clinic trial

  • Martinez-Serrano, MA
  • Grande, Luis
  • Burdío, Fernando
  • Poves, Ignasi
  • Quesada, Rita
  • Berjano, Enrique|||0000-0002-3247-2665
[ES] El instrumento ideal para realizar la transección hepática debería aunar en una sola herramienta hemostasia segura y rápida. Presentamos nuestra investigación multidisciplinar encaminada al desarrollo de un dispositivo de transección hepática asistido por radiofrecuencia (RF); la investigación incluye: modelado teórico por computador, estudio experimental y ensayo clínico de este dispositivo. El modelado teórico se realizó por computador basado en el Método de Elementos Finitos (MEF) con objeto de estudiar la distribución de energía eléctrica y temperatura en el tejido y valorar el efecto de las características del instrumento. El estudio experimental basado en un modelo in vivo porcino sugiere que el nuevo instrumento permitiría aumentar la velocidad de transección del parénquima hepático con una menor hemorragia por área de transección al compararlo con otras técnicas ampliamente extendidas en la cirugía hepática. Estos datos permitieron afrontar la realización de la primera fase de un ensayo clínico, cuyos resultados preliminares sugieren que el nuevo instrumento es seguro y eficaz., [EN] The ideal instrument for performing hepatic transection should combine safe and rapid haemostasis in a single tool. We present a new multidisciplinary investigation designed to develop a hepatic transection device assisted by radiofrequency (RF); the investigation included: a computerised theoretical model, and experimental study and a clinical trial of this device. The theoretic modelling was performed by computer, based on the Finite Elements Method (FEM), with the objective of studying the distribution of electrical energy and temperature in the tissue, and to assess the effect of the characteristics of the instrument. The experimental study, based on an in vivo porcine model, suggested that the new instrument would allow the transection velocity of the hepatic parenchyma to be increased with lower bleeding per transection area compared with other techniques extensively used in liver surgery. These data should enable the first phase of clinical trial to be conducted, with preliminary results that suggest that the new device is safe and effective., Los autores agradecen al Ministerio de Ciencia e Innovación el apoyo financiero otorgado mediante el Programa de Proyectos de I + D + i (Proyecto n.8 TEC2008-01369/TEC), y el Programa de Promoción de la Investigación Biomédica y en Ciencias de la Salud (Proyecto n.8 PI080934).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impedance measurement to assess epicardial fat prior to RF intraoperative cardiac ablation: a feasibility study using a computer model

  • González-Suárez, Ana|||0000-0002-1813-4176
  • Berjano, Enrique|||0000-0002-3247-2665
  • Hornero, Fernando
[EN] Radiofrequency (RF) cardiac ablation is used to treat certain types of arrhythmias. In the epicardial approach, efficacy of RF ablation is uncertain due to the presence of epicardial adipose tissue interposed between the ablation electrode and the atrial wall. We planned a feasibility study based on a theoretical model in order to assess a new technique to estimate the quantity of fat by conducting bioimpedance measurements using a multi-electrode probe. The finite element method was used to solve the electrical problem. The results showed that the measured impedance profile coincided approximately with the epicardial fat profile measured under the probe electrodes and also that the thicker the epicardial fat, the higher the impedance values. When the lateral fat width was less than 4.5 mm, the impedance values altered, suggesting that measurements should always be conducted over a sizeable fat layer. We concluded that impedance measurement could be a practical method of assessing epicardial fat prior to RF intraoperative cardiac ablation, i.e. 'to map' the amount of adipose tissue under the probe., This work was supported by a research grant from the Spanish Government in the 'Plan Nacional de I+D+I del Ministerio de Ciencia e Innovacion' (TEC2008-01369/TEC). The English revision and correction of this note was funded by the Universidad Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Distant infusion of saline may enlarge coagulation volume during radiofrequency ablation of liver tissue using cool-tip electrodes without impairing predictability

  • Burdío, Fernando
  • Tobajas, Pilar
  • Quesada-Diez, Rita
  • Navarro, Ana
  • Poves, Ignasi
  • Grande, Luís
  • Berjano, Enrique|||0000-0002-3247-2665
OBJECTIVE. Our aim was to evaluate the capability of a Cool-tip electrode to create larger coagulation volumes combined with a low-flow (0.1 mL/min) perfusion of hypertonic saline at a distance of 2 mm (hybrid applicator) without reducing either predictability or sphericity of the coagulation zone. MATERIALS AND METHODS. A total of 48 radiofrequency ablations were performed on a total of 12 adult pigs: 24 with the Cool-tip (group 1) and 24 with the hybrid applicator (group 2). Volumes and diameters were assessed both macroscopically and with imaging techniques (ultrasound and MRI). Digital reconstruction techniques were also used. Reproducibility of the coagulations was assessed by means of the coefficient of variation. RESULTS. The macroscopic assessment showed a significantly larger coagulation zone in group 2 than in group 1, both with (19.40 ± 11.38 cm3 vs 9.16 ± 5.62 cm3; p < 0.001) and without (19.54 ± 11.39 cm3 vs 9.21 ± 5.74 cm3; p < 0.001) digital reconstruction. Differences were also significant in the MRI assessment. The minimum transverse diameter was also significantly (p < 0.01) larger in group 2 than group 1: 2.46 ± 0.61 versus 1.86 ± 0.55 cm for macroscopic assessment, 2.33 ± 0.96 versus 1.69 ± 0.53 cm for ultrasound, and 2.41 ± 0.58 versus 1.8 ± 0.52 cm for MRI. The coefficient of variation was similar in both groups. CONCLUSION. The results suggest that low-flow perfusion of hypertonic saline at 2 mm from a Cool-tip electrode could increase coagulation zone volume without reducing predictability., This work received financial support from the Spanish "Plan Nacional de I+D+I del Ministerio de Ciencia e Innovacion" grant number TEC2008-01369/TEC. The translation of this article was funded by the Universidad Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mathematical modeling of epicardial RF ablation of atrial tissue with overlying epicardial fat

  • González-Suárez, Ana|||0000-0002-1813-4176
  • Berjano, Enrique|||0000-0002-3247-2665
  • Hornero, Fernando
[EN] The efficacy of treating atrial fibrillation by RF ablation on the epicardial surface is currently under question due to the presence of epicardial adipose tissue interposed between the ablation electrode and target site (atrial wall). The problem is probably caused by the electrical conductivity of the fat (0.02 S/m) being lower than that of the atrial tissue (0.4-0.6 S/m). Since our objective is to improve epicardial RF ablation techniques, we planned a study based on a two-dimensional mathematical model including an active electrode, a fragment of epicardial fat over a fragment of atrial tissue, and a section of atrium with circulating blood. Different procedures for applying RF power were studied, such as varying the frequency, using a cooled instead of a dry electrode, and different modes of controlling RF power (constant current, temperature and voltage) for different values of epicardial fat thickness. In general, the results showed that the epicardial fat layer seriously impedes the passage of RF current, thus reducing the effectiveness of atrial wall RF ablation., This work was supported by a research grant from the Spanish Government in the Plan Nacional de I+D+I del Ministerio de Ciencia e Innovación" (TEC2008-01369/TEC). We would like to thank the R+D+i Linguistic Assistance Office at the Universidad Politécnica of Valencia for their help in revising this paper.