Pasar al contenido principal

NANOESTRUCTURAS DE CRISTAL FOTONICO PARA DIODOS EMISORES DE LUZ BASADOS EN SILICIO

TEC2011-29045-C04-03

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Excitation power dependence of the Purcell effect in photonic crystalmicrocavity lasers with quantum wires

  • Canet-Ferrer, J.
  • Prieto, I.
  • Muñoz Matutano, Guillermo
  • Martínez, L.J.
  • Muñoz-Camuniez, L.E.
  • Llorens, J.M..
  • Fuster, D.
  • Alén, B.
  • González, Y.
  • González, L.
  • Postigo, P.A.
  • Martínez-Pastor, J.P.
[EN] The Purcell effect dependence on the excitation power is studied in photonic crystal microcavity lasers embedding InAs/InP quantum wires. In the case of non-lasing modes, the Purcell effect has low dependence on the optical pumping, attributable to an exciton dynamics combining free and localized excitons. In the case of lasing modes, the influence of the stimulated emission makes ambiguous the determination of the Purcell factor. We have found that this ambiguity can be avoided by measuring the dependence of the decay time on the excitation power. These results provide insights in the determination of the Purcell factor in microcavity lasers., We want to acknowledge financial support from the Spanish MICINN through grants (Nos. S-0505-TIC-0191, TEC2008-06756-C03-01/-03, TEC2011-29045-C04-03, TEC2011-29120-C05-01/04, and CAM S2009ESP-1503). J.C.-F. thanks the Spanish MCI for his FPI grant (No. BES-2006-12300).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microbial trench-based optofluidic system for reagentless determination of phenolic compounds

  • Sanahuja, David
  • Giménez-Gómez, Pablo
  • Vigués, Núria
  • Ackermann, Tobias Nils
  • Guerrero-Navarro, Alfons Eduard
  • Pujol-Vila, Ferran
  • Sacristán, Jordi
  • Santamaria, Nidia
  • Sánchez-Contreras, María
  • Díaz-González, María
  • Mas, Jordi
  • Muñoz-Berbel, Xavier
Phenolic compounds are one of the main contaminants of soil and water due to their toxicity and persistence in the natural environment. Their presence is commonly determined with bulky and expensive instrumentation (e.g. chromatography systems), requiring sample collection and transport to the laboratory. Sample transport delays data acquisition, postponing potential actions to prevent environmental catastrophes. This article presents a portable, miniaturized, robust and low-cost microbial trench-based optofluidic system for reagentless determination of phenols in water. The optofluidic system is composed of a poly(methyl methacrylate) structure, incorporating polymeric optical elements and miniaturized discrete auxiliary components for optical transduction. An electronic circuit, adapted from a lock-in amplifier, is used for system control and interfering ambient light subtraction. In the trench, genetically modified bacteria are stably entrapped in an alginate hydrogel for quantitative determination of model phenol catechol. Alginate is also acting as a diffusion barrier for compounds present in the sample. Additionally, the superior refractive index of the gel (compared to water) confines the light in the lower level of the chip. Hence, the optical readout of the device is only altered by changes in the trench. Catechol molecules (colorless) in the sample diffuse through the alginate matrix and reach bacteria, which degrade them to a colored compound. The absorbance increase at 450 nm reports the presence of catechol simply, quickly (~10 min) and quantitatively without addition of chemical reagents. This miniaturized, portable and robust optofluidic system opens the possibility for quick and reliable determination of environmental contamination in situ, thus mitigating the effects of accidental spills., This work was supported in part by the Spanish R & D National Program (MINECO Project TEC2011-29045-C04-01/04). X. M.-B. also wants to acknowledge the “Ramón y Cajal” program from the Spanish Government. P. G.-G. is grateful to the Spanish MEC for the award of a research studentship from FPI Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Portable and miniaturized optofluidic analysis system with ambient light correction for fast in situ determination of environmental pollution

  • Pujol-Vila, Ferran
  • Giménez-Gómez, Pablo
  • Santamaria, Nidia
  • Antúnez, Bernat
  • Vigués, Núria
  • Díaz-González, María
  • Jiménez-Jorquera, Cecilia
  • Mas, Jordi
  • Sacristán-Riquelme, Jordi
  • Muñoz-Berbel, Xavier
Environmental pollutants determination mostly requires sample collection and transport to the laboratory for analysis. This process delays data acquisition, postponing any action to prevent an environmental catastrophe. This article presents an optical analysis system for in situ determination of environmental pollution, overcoming traditional limitations of optical systems such as cost, robustness, portability, dimensions, complexity or the interference of ambient light. The optical analysis system is composed of a poly(methyl methacrylate) (PMMA) optofluidic structure incorporating discrete auxiliary optical elements (i.e. light emitting diodes, LEDs, and detectors) controlled by an electronic circuit, which enables optical measurement and subtraction ambient light interference. Electronic circuit is based on a simplification of a lock-in amplifier where information is at the level of the received signal (modulus) and the phase is not considered. This configuration allows for simplification of electronic circuit requirements (i.e. mixer and Phase Locked Loop, PLL, systems are not necessary) and important reduction of size and cost. To this end, analytical signal pattern generated with the microcontroller is positioned at a frequency much higher (8 kHz) than potential interfering sources (e.g. house light or sunlight, below 50 Hz), which simplifies filtering. Optical analysis system is applied to general toxicity determination of water samples in situ. Toxicity analysis is based on a quick optical bioassay where bacterial reduction kinetics of ferricyanide is used to determine cell metabolism in less than 10 min. Ferricyanide interacts with bacterial membrane proteins which reduces it with time. Ferricyanide reduction kinetics (as the variation of ferricyanide absorption with time) allows for simple, sensitive and reliable water toxicity determination with a portable, robust, miniaturized and low cost system, insensitive to environmental changes. This optical instrument, here applied to environmental pollution, may be used in the in situ determination of other (bio)molecules of interest, such as biomarkers in biochemical analysis or pathogens in the food and beverage industry., This work was supported in part by the Spanish R & D National Program (MINECO Project TEC2011-29045-C04-01/04). X. M.-B. also wants to acknowledge the “Ramón y Cajal” program from the Spanish Government. P. G.-G. is grateful to the Spanish MEC for the award of a research studentship from FPI Program., Peer reviewed