Pasar al contenido principal

APROXIMACION MULTINIVEL AL DISEÑO ORIENTADO A LA FIABILIDAD DE CIRCUITOS INTEGRADOS ANALOGICOS Y DIGITALES

TEC2013-45638-C3-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Dedicated Random Telegraph Noise Characterization of Ni/HfO2-based RRAM Devices

  • González, M. B.
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Acero Leal, María Cruz
  • Nafría, Montserrat
  • Campabadal, Francesca
  • Aymerich, Xavier
Trabajo presentado en la 19th Conference on Insulating Films on Semiconductors 2015, celebrado en Udine (Italia), del 29 de junio al 2 de julio de 2015, In this work, random telegraph noise (RTN) associated to discrete current fluctuations in the high resistive state of Ni/HfO2-based RRAM devices is investigated. For this purpose, a dedicated software tool has been developed to control the instrumentation and to perform successive and smart RTN measurements in the time domain. After data acquisition, the advanced Weighted Time Lag (WTL) method is employed to accurately identify the contribution of multiple electrically active defects in multilevel RTN signals. Finally, the internal dynamics of trapping and de-trapping processes through the defects close to the filamentary path and its dependence on voltage and time are analyzed., The support of the Spanish Ministry of Economy and Competitiveness under Projects TEC2011-27292-C02-02 (IMB-CNM) and TEC2013-45638-C3-1-R (UAB) is acknowledged. UAB authors also thank the support of the Generalitat de Catalunya under Project 2014 SGR-384.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis of set and reset mechanisms in Ni/HfO2-based RRAM with fast ramped voltages

  • Maestro Izquierdo, Marcos|||0000-0002-8940-9050
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Diaz-Fortuny, Javier|||0000-0002-8186-071X
  • Crespo-Yepes, A.|||0000-0003-4618-651X
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Rodriguez, R.|||0000-0002-4565-6703
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Aymerich Humet, Xavier|||0000-0002-5874-6257
The resistive switching phenomenon is analyzed using a purposely developed setup which allows fast ramped voltages and measurements in the time domain.Taking advantage of these capabilities, the Set and Reset processes in Ni/HfO2 structures have been studied for a large range of voltage ramp speeds. The results obtained show that Set and Reset voltages increase with voltage ramp speed. The use of time domain measurements has allowed concluding that a critical energy is needed to trigger the Set and Reset processes, independently of the biasing conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Conductive-AFM topography and current maps simulator for the study of polycrystalline high-k dielectrics

  • Couso, Carlos|||0000-0003-4757-2439
  • Porti i Pujal, Marc|||0000-0001-7438-3823
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Iglesias Santiso, Vanessa|||0000-0001-5831-0974
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Aymerich Humet, Xavier|||0000-0002-5874-6257
In this work, a simulator of conductive atomic force microscopy (C-AFM) was developed to reproduce topography and current maps. In order to test the results, the authors used the simulator to investigate the influence of the C-AFM tip on topography measurements of polycrystalline high-k dielectrics, and compared the results with experimental data. The results show that this tool can produce topography images with the same morphological characteristics as the experimental samples under study. Additionally, the current at each location of the dielectric stack was calculated. The quantum mechanical transmission coefficient and tunneling current were obtained from the band diagram by applying the Airy wavefunction approach. Good agreement between experimental and simulation results indicates that the tool can be very useful for evaluating how the experimental parameters influence C-AFM measurements.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dedicated random telegraph noise characterization of Ni/HfO2-based RRAM devices

  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Acero Leal, María Cruz
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Aymerich Humet, Xavier|||0000-0002-5874-6257
In this work, random telegraph noise (RTN) associated to discrete current fluctuations in the high resistive state of Ni/HfO2-based RRAM devices is investigated. For this purpose, a dedicated software tool has been developed to control the instrumentation and to perform successive and smart RTN measurements in the time domain. After data acquisition, the advanced Weighted Time Lag (WTL) method is employed to accurately identify the contribution of multiple electrically active defects in multilevel RTN signals. Finally, the internal dynamics of trapping and de-trapping processes through the defects close to the filamentary path and its dependence on voltage and time are analyzed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Monitoring defects in III-V materials, a nanoscale CAFM study

  • Iglesias Santiso, Vanessa|||0000-0001-5831-0974
  • Wu, Q.
  • Porti i Pujal, Marc|||0000-0001-7438-3823
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Bersuker, G.
  • Cordes, A.
The implementation of high mobility devices requires growing III-V materials on silicon substrates. However, due to the lattice mismatch between these materials, III-V semiconductors tend to develop structural defects affecting device electrical characteristics. In this study, the CAFM technique is employed for identification and analysis of nanoscale defects, in particular, Threading Dislocations (TD), Stacking faults (SF) and Anti-phase Boundaries (APB), in III-V materials grown over silicon wafers.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Non-homogeneuos conduction of conductive filaments in Ni/HfO2/Si resistive switching structures observed with CAFM

  • Claramunt, Sergi|||0000-0002-2888-7825
  • Wu, Qian
  • Maestro Izquierdo, Marcos|||0000-0002-8940-9050
  • Porti i Pujal, Marc|||0000-0001-7438-3823
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Nafria, Montserrat|||0000-0002-9549-2890
Conductive filaments (CFs) in Ni/HfO₂/Si resistive switching structures are analysed at the nanoscale by means of Conductive Atomic Force Microscopy (CAFM). Differences in the CF conductivity are measured depending on the resistive state of the device. Moreover, for both resistance states, non-homogeneous conduction across the CF area is observed, in agreement with a tree-shaped CF.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Channel-Hot-Carrier degradation of strained MOSFETs, A device level and nanoscale combined approach

  • Wu, Qian
  • Porti i Pujal, Marc|||0000-0001-7438-3823
  • Bayerl, Albin
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Aymerich Humet, Xavier|||0000-0002-5874-6257
  • Simoen, E.
Strained MOSFETs with SiGe at the source/drain regions and different channel lengths have been studied at the nanoscale with a conductive atomic force microscope (CAFM) and at device level, before and after channel-hot-carrier (CHC) stress. The results show that although strained devices have a larger mobility, they are more sensitive to CHC stress. This effect has been observed to be larger in short channel devices. The higher susceptibility of strained MOSFETs to the stress has been related to a larger density of defects close to the diffusions, as suggested by CAFM data.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Conductance of threading dislocations in InGaAs/Si stacks by temperature-CAFM measurements

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

New high resolution random telegraph noise (RTN) characterization method for resistive RAM

  • Maestro Izquierdo, Marcos|||0000-0002-8940-9050
  • Diaz-Fortuny, Javier|||0000-0002-8186-071X
  • Crespo-Yepes, A.|||0000-0003-4618-651X
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Aymerich Humet, Xavier|||0000-0002-5874-6257
Random Telegraph Noise (RTN) is one of the main reliability problems of resistive switching-based memories. To understand the physics behind RTN, a complete and accurate RTN characterization is required. The standard equipment used to analyse RTN has a typical time resolution of ∼2 ms which prevents evaluating fast phenomena. In this work, a new RTN measurement procedure, which increases the measurement time resolution to 2 μs, is proposed. The experimental set-up, together with the recently proposed Weighted Time Lag (W-LT) method for the analysis of RTN signals, allows obtaining a more detailed and precise information about the RTN phenomenon.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Low-power, high-performance, non-volatile inkjet-printed HfO 2 -based resistive random access memory, from device to nanoscale characterization

  • Vescio, Giovanni|||0000-0002-2418-249X
  • Martín, Gemma
  • Crespo-Yepes, A.|||0000-0003-4618-651X
  • Claramunt, Sergi|||0000-0002-2888-7825
  • Alonso Pérez, Daniel
  • Lopez-Vidrier, Julian|||0000-0003-0907-5853
  • Estrade, Sonia|||0000-0002-3340-877X
  • Porti i Pujal, Marc|||0000-0001-7438-3823
  • Rodriguez, R.|||0000-0002-4565-6703
  • Peiro, Francesca|||0000-0002-5697-0554
  • Cornet, Albert
  • Cirera, Albert|||0000-0002-2075-1536
  • Nafria, Montserrat|||0000-0002-9549-2890
Low-power, high-performance metal-insulator-metal (MIM) non-volatile resistive memories based on HfO2 high-k dielectric are fabricated using a drop-on-demand inkjet printing technique as a low-cost and eco-friendly method. The characteristics of resistive switching of Pt (bottom)/HfO2/Ag (top) stacks on Si/ SiO2 substrates are investigated in order to study the bottom electrode's interaction with the HfO2 dielectric layer and the resulting effects on resistive switching. The devices show low Set and Reset voltages, high ON/OFF current ratio, and relatively low switching current (~1 μA), which are comparable to the characteristics of current commercial CMOS memories. In order to understand the resistive switching mechanism, direct structural observation is carried out by field-emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HRTEM) on cross-sectioned samples prepared by focused ion beam (FIB). In addition, electron energy loss spectroscopy (EELS) inspections discard a silver electro-migration effect.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A flexible characterization methodology of RRAM, application to the modeling of the conductivity changes as synaptic weight updates

  • Pedro, Marta|||0000-0003-0317-7373
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Nafria, Montserrat|||0000-0002-9549-2890
In this work, an automatic and flexible measurement setup, which allows a massive electrical characterization of single RRAM devices with pulsed voltages, is presented. The evaluation of the G-V maps under single-pulse test-schemes is introduced as an example of application of the proposed methodology, in particular for neuromorphic engineering, where the fine analog control of the synaptic device conductivity state is required, by inducing small changes in each learning iteration. To describe the obtained data, a time-independent compact model for memristive devices is used. The fitting parameters statistical distributions are further studied.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An unsupervised and probabilistic approach to Pavlov's dog experiment with OxRAM devices

  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Pedro, Marta|||0000-0003-0317-7373
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
In this work, a potential basis for implementing unsupervised associative learning in two or more memristors within neuromorphic architectures is proposed. The experimental demonstration is carried out by means of emulating the Pavlov's dog classical conditioning experiment with two OxRAM devices, in which the dependence of the probability of association on test parameters, such as the pulse amplitude, is studied.