Pasar al contenido principal

MICRO- Y NANOHERRAMIENTAS EN SUSPENSION PARA APLICACIONES EN CELULAS VIVAS

TEC2014-51940-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Implementing thermometry on silicon surfaces functionalized by lanthanide-doped self-assembled polymer monolayers

  • Piñol, Rafael
  • Antorrena, Guillermo
  • Brites, Carlos
  • Silva, Nuno Joâo O.
  • Murillo, José Luis
  • Cases, Rafael
  • Díez, Isabel
  • Palacio, Fernando
  • Carlos, Luis D.
  • Millán, Ángel
The thermal gradients generated at submicrometer scale by the millions of transistors contained in integrated circuits are becoming the key limiting factor for device integration in micro- and nanoelectronics. Noncontact thermometric techniques with high-spatial resolution are, thus, essential for noninvasive off-chip characterization and heat management on Si surfaces. Here, the first ratiometric luminescent molecular thermometer implemented in a self-assembled polymer monolayer functionalized Si surface is reported. The functionalization of Si surfaces with luminescent thermometers constitutes a proof-of-concept that foretells a wide range of applications in Si-based micro- and nanostructures. The thermometric functionalization of the Si surface with Tb3+ and Eu3+ complexes leads to a thermal sensitivity up to 1.43% K−1, a cycle–recycle reliability of 98.6%, and a temperature uncertainty of less than 0.3 K. The functionalized surface presents reversible bistability that can be used as an optically active molecular demultiplexer., Financial support from the Spanish Ministry of Science and Innovation research grants BFU2009-12763/BFI, MAT2011-259911, TEC2011-29140, and TEC2014-51940, and Project Consolider-Ingenio in Molecular Nanoscience CSD2007-00010 are gratefully acknowledged. Moreover, the work was partially developed in the scope of the project CICECO − Aveiro Institute of Materials (Ref. FCT UID/CTM/50011/2013), financed by Portuguese funds through the FCT/MEC and when applicable cofinanced by FEDER under the PT2020 Partnership Agreement. C.D.S.B. and N.J.O.S. thank the Portuguese Fundação para a Ciência e Tecnologia (FCT) for their grants (SFRH/BPD/89003/2012 and IF/01653/2013, respectively)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of Galfenol direct cytotoxicity and remote microactuation in cells

  • Vargas-Estevez, Carolina
  • Blanquer, Andreu
  • Dulal, Prabesh
  • Pérez del Real, Rafael
  • Duch, Marta
  • Ibáñez, Elena
  • Barrios, Leonardo
  • Murillo Rodríguez, Gonzalo
  • Torras, Núria
  • Nogués, Carme
  • Stadler, Bethanie J. H.
  • Plaza, José Antonio
  • Esteve i Tintó, Jaume
Remote microactuators are of great interest in biology and medicine as minimally-invasive tools for cellular stimulation. Remote actuation can be achieved by active magnetostrictive transducers which are capable of changing shape in response to external magnetic fields thereby creating controlled displacements. Among the magnetostrictive materials, Galfenol, the multifaceted iron-based smart material, offers high magnetostriction with robust mechanical properties. In order to explore these capabilities for biomedical applications, it is necessary to study the feasibility of material miniaturization in standard fabrication processes as well as evaluate the biocompatibility. Here we develop a technology to fabricate, release, and suspend Galfenol-based microparticles, without affecting the integrity of the material. The morphology, composition and magnetic properties of the material itself are characterized. The direct cytotoxicity of Galfenol is evaluated in vitro using human macrophages, osteoblast and osteosarcoma cells. In addition, cytotoxicity and actuation of Galfenol microparticles in suspension are evaluated using human macrophages. The biological parameters analyzed indicate that Galfenol is not cytotoxic, even after internalization of some of the particles by macrophages. The microparticles were remotely actuated forming intra- and extracellular chains that did not impact the integrity of the cells. The results propose Galfenol as a suitable material to develop remote microactuators for cell biology studies and intracellular applications., This study was supported by the Spanish Government through the project MINAHE 5 (No. TEC2014-51940-C1) and ENVBIOPORAL (No. MAT2014-57960-C3-3-R), the predoctoral FPI grant (No. BES- 2012-052105), the NANONEURO project PIE201350E110 (CSIC) and the Generalitat de Catalunya (2014-SGR-524). A.B. was supported by a predoctoral grant from the Universitat Aut onoma de Barcelona. We wish to thank as well the IMB-CNM Clean Room (Barcelona, Spain), Prof. William P. Robbins of University of Minnesota (Minneapolis, USA) for his support to perform the magnetostrictive measurements and the Institute for Rock Magnetism (Minneapolis, USA) for its facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Suspended Planar-Array Chips for Molecular Multiplexing atthe Microscale

  • Torras, Núria
  • Agusil, Juan Pablo
  • Vázquez, Patricia
  • Duch, Marta
  • Hernández-Pinto, Alberto M.
  • Samitier, Josep
  • De la Rosa, Enrique J.
  • Esteve, Jaume
  • Suárez González, Teresa
  • Pérez-García, Lluïsa
  • Plaza, José Antonio
A novel suspended planar-array chips technology is described, which effectively allows molecular multiplexing using a single suspended chip to analyze extraordinarily small volumes. The suspended chips are fabricated by combining silicon-based technology and polymer-pen lithography, obtaining increased molecular pattern flexibility, and improving miniaturization and parallel production. The chip miniaturization is so dramatic that it permits the intracellular analysis of living cells., This work was supported by the EU ERDF (FEDER) funds and the Spanish Government grants TEC2011‐29140‐C03‐01/02 and TEC2014‐51940‐C2‐1/2. PV was supported by a JAE‐DOC contract (FSE funding)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silicon-nanowire based attachment of silicon chips for mouse embryo labelling

  • Durán, S.
  • Novo, S.
  • Duch, M.
  • Gómez-Martínez, Rodrigo
  • Fernández-Regúlez, Marta
  • San Paulo, A.
  • Nogués, C.
  • Esteve i Tintó, Jaume
  • Ibáñez, E.
  • Plaza, José Antonio
© 2015 The Royal Society of Chemistry. The adhesion of small silicon chips to cells has many potential applications as direct interconnection of the cells to the external world can be accomplished. Hence, although some typical applications of silicon nanowires integrated into microsystems are focused on achieving a cell-on-a-chip strategy, we are interested in obtaining chip-on-a-cell systems. This paper reports the design, technological development and characterization of polysilicon barcodes featuring silicon nanowires as nanoscale attachment to identify and track living mouse embryos during their in vitro development. The chips are attached to the outer surface of the Zona Pellucida, the cover that surrounds oocytes and embryos, to avoid the direct contact between the chip and the embryo cell membrane. Two attachment methodologies, rolling and pushpin, which allow two entirely different levels of applied forces to attach the chips to living embryos, are evaluated. The former consists of rolling the mouse embryos over one barcode with the silicon nanowires facing upwards, while in the latter, the barcode is pushed against the embryo with a micropipette. The effect on in vitro embryo development and the retention rate related to the calculated applied forces are stated. Field emission scanning electron microscopy inspection, which allowed high-resolution imaging, also confirms the physical attachment of the nanowires with some of them piercing or wrapped by the Zona Pellucida and revealed extraordinary bent silicon nanowires., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanometric metal-film thickness measurement based on a planar spiral coils stack

  • Vargas-Estevez, Carolina
  • Robaina, Roberto R.
  • Pérez del Real, Rafael
  • Plaza, José Antonio
This paper presents a sensor composed of a differential arrangement of coils capable ofmeasuring nanometric metallic film thickness. Experimental results achieved aluminum thickness measurements as lowas 20 nmwith a sensitivity of 3.8 mV/nm. This makes this sensor a flexible, nondestructive, and cheap alternative for metallic thickness measurement down to nanometric scale., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Technological development of intracellular polysilicon-chromium-gold chips for orthogonal chemical functionalization

  • Durán, S.
  • Duch, M.
  • Patiño, T.
  • Torres, A.
  • Penon, O.
  • Gómez-Martínez, Rodrigo
  • Barrios, Lizandra
  • Esteve i Tintó, Jaume
  • Nogués, C.
  • Pérez-García, L.
  • Plaza, José Antonio
© 2014 Elsevier B.V. Increasingly, advances in microtechnologies are focused on obtaining new chips intended for applications in fields such as nanomedicine and cell biology, taking advantage of the ability of microelectronics to manufacture devices with cell dimensions and a large variety of features. Here, we report a technology for the fabrication of multi-material chips, using polysilicon and gold as device layers, to be used as bi-functional cell-internalizable devices. In our case, one of the main technological challenges is to overcome the low adherence between these two materials, especially because of their small contact-area, only 9 μm2. Thus, in order to circumvent this difficulty a chromium adherent-layer was deposited in between. After fabrication, the devices following this design can be successfully internalized inside living macrophages without affecting their viability. The advantage of having multiple material layers in one device is the potential to render multi-tasking chips, as once they are appropriately functionalized, we can provide the chip the ability of being multi-functional. Hence, and as a proof of concept, two different proteins, Wheat Germ Agglutinin (WGA) and Concanavalin (ConA), were immobilized on the chip surface through self-assembled monolayers using orthogonal chemistry. The results of this work show a well-controlled fabrication, the bi-functional capabilities and no cell-toxicity of intracellular polysilicon-chromium-gold chips. Eventually, two different dyes (Oregon Green® 488 and BODIPY® 581/591) were used to bi-functionalize each surface of the multi-material chip in order to demonstrate that functional chips can also be internalized in living cells. These devices have a promising future as intracellular functional platforms for biosensing, drug delivery and diagnosis., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combination of PDMS microfilters and micromixers based on flexible thermoplastic films for size sorting and mixing of microparticles

  • Lee, M.
  • Lopez-Martinez, M.J.
  • Baraket, Abdoullatif
  • Zine, N.
  • Esteve i Tintó, Jaume
  • Plaza, José Antonio
  • Ahmed, N.
  • Elaissari, Abdelhamid
  • Jaffrezic-Renault, Nicole
  • Errachid, Abdelhamid
© 2015 Wiley Periodicals, Inc. We present a study for the development of flexible microfilters based on sealing microstructured poly(dimethylsiloxane) (PDMS) to different functionalized thermoplastic films [polyimide (PI), polyethylene naphthalate (PEN), and polyethylene terephthalate (PET)]. The microfilter was manufactured by soft-lithography and replica molding and then combined with plasma activation and chemical treatment using 3-(aminopropyl)triethoxysilane (APTES). To demonstrate the functionality of the PDMS microfilters, poly(lactic-co-glycolic acid) (PLGA) microparticles (MPS) were filtered through the microfluidic device based on the three thermoplastic films. Subsequently, the mixing capabilities of a passive PDMS micromixer was observed with the injection of polymeric MPS (fluorescent and nonfluorescent) as fluidic mixers are not generally effective at mixing particles. On mixing nonfluorescent MPS (∼<10-30 μm in diameter) a mixing performance of 13.3% at 5 mm was observed. Therefore, a PDMS microfiltering device was integrated with a PDMS micromixer using a simple and cost effective home-made polymeric connector for filtration at a size sorting of 11 μm. The results exhibit that the combination of the two microfluidic devices can be achieved with size sorting and mixing of MPS with an improved mixing performance of 62.5% at 3 mm., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Traceability of human sperm samples by direct tagging with polysilicon microbarcodes

  • Novo, S.
  • Mora-Espí, I.
  • Gómez-Martínez, Rodrigo
  • Barrios, Lizandra
  • Ibáñez, E.
  • Such, X.
  • Duch, M.
  • Mora, X.
  • Plaza, José Antonio
  • Nogués, C.
© 2015 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved. The increasing number of patients undergoing assisted reproductive technology (ART) treatments and of cycles performed in fertility centres has led to some traceability errors. Although the incidence of mismatching errors is extremely low, any error is unacceptable, therefore different strategies have been developed to further minimize these errors, such as manual double-witnessing or electronic witnessing systems. More recently, our group developed a direct tagging method consisting of attaching microbarcodes directly to the zona pellucida of human oocytes/embryos. Here, this method is taken a step further by using these microbarcodes to tag human semen samples, demonstrating that the barcodes are not toxic and do not interfere in the selection of motile spermatozoa nor in the cryopreservation of the sperm samples. In addition, when this tagging system was applied to an animal model (rabbit), pregnancy rate and kitten viability were not affected., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polysilicon-chromium-gold intracellular chips for multi-functional biomedical applications

  • Patiño, T.
  • Soriano, J.
  • Amirthalingam, E.
  • Durán, S.
  • González-Campo, Arántzazu
  • Duch, M.
  • Ibáñez, E.
  • Barrios, Lizandra
  • Plaza, José Antonio
  • Pérez-García, L.
  • Nogués, C.
The development of micro- and nanosystems for their use in biomedicine is a continuously growing field. One of the major goals of such platforms is to combine multiple functions in a single entity. However, achieving the design of an efficient and safe micro- or nanoplatform has shown to be strongly influenced by its interaction with the biological systems, where particle features or cell types play a critical role. In this work, the feasibility of using multi-material pSi-Cr-Au intracellular chips (MMICCs) for multifunctional applications by characterizing their interactions with two different cell lines, one tumorigenic and one non-tumorigenic, in terms of biocompatibility, internalization and intracellular fate, has been explored. Moreover, the impact of MMICCs on the induction of an inflammatory response has been assessed by evaluating TNFα, IL1b, IL6, and IL10 human inflammatory cytokines secretion by macrophages. Results show that MMICCs are biocompatible and their internalization efficiency is strongly dependent on the cell type. Finally as a proof-of-concept, MMICCs have been dually functionalized with transferrin and pHrodo™ Red, SE to target cancer cells and detect intracellular pH, respectively. In conclusion, MMICCs can be used as multi-functional devices due to their high biocompatibility, non-inflammatory properties and the ability of developing multiple functions., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructured materials for photodynamic therapy: synthesis, characterization and in vitro activity

  • Alea-Reyes, María E.
  • Rodrigues, M.
  • Serrà, A.
  • Mora, M.
  • Sagristá, M.L.
  • González, A.
  • Durán, S.
  • Duch, M.
  • Plaza, José Antonio
  • Vallés, E.
  • Russell, D.A.
  • Pérez-García, L.
Three nanostructured vehicles are proposed as potential carriers for photosensitizers to be used in photodynamic therapy: spherical nanoparticles, hexahedral microparticles and cylindrical magnetic nanorods. A comparative study of their photodynamic properties was performed, and the influence of their size and the amount of loaded porphyrin was considered to discuss their effects in the observed photodynamic activity. All the vehicles have a gold surface, allowing functionalization with a disulfide-containing porphyrin as the photosensitizer, as well as with a PEG-containing thiol to improve their biocompatibility and water solubility. The activity of the porphyrin loaded in each vehicle was assessed through in vitro photocytotoxicity studies using HeLa cells. A synergic effect for the porphyrin toxicity was observed in all of the vehicles. The zinc-containing porphyrin showed better production of singlet oxygen, and proved more photocytotoxic both in solution and loaded in any of the vehicles. The magnetism of the nanorods allows targeting with a magnetic field, but causes their aggregation, hampering the porphyrin's activity. Microparticles showed lower cell internalization but their bigger size allowed a high porphyrin loading, which translated into high photocytotoxicity. The highest cell internalization and photocytotoxicity was observed for the porphyrin-loaded nanoparticles, suggesting that a smaller size is favored in cell uptake., Peer Reviewed