Pasar al contenido principal

ARQUITECTURAS CMOS DE DEMODULADORES SINCRONOS PARA SENSORES INTELIGENTES

TEC2015-65750-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD DE ZARAGOZA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A wearable wireless sensor network for indoor smart environment monitoring in safety applications

  • Antolín, D.
  • Medrano, N.
  • Calvo, B.
  • Pérez, F.
This paper presents the implementation of a wearable wireless sensor network aimed at monitoring harmful gases in industrial environments. The proposed solution is based on a customized wearable sensor node using a low-power low-rate wireless personal area network (LR-WPAN) communications protocol, which as a first approach measures CO2 concentration, and employs different low power strategies for appropriate energy handling which is essential to achieving long battery life. These wearables nodes are connected to a deployed static network and a web-based application allows data storage, remote control and monitoring of the complete network. Therefore, a complete and versatile remote web application with a locally implemented decision-making system is accomplished, which allows early detection of hazardous situations for exposed workers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A compact energy harvesting system for outdoor wireless sensor nodes based on a low-cost in situ photovoltaic panel characterization-modelling unit

  • Antolín, Diego
  • Medrano, Nicolás
  • Calvo, Belén
  • Martínez, Pedro A.
This paper presents a low-cost high-efficiency solar energy harvesting system to power outdoor wireless sensor nodes. It is based on a Voltage Open Circuit (VOC) algorithm that estimates the open-circuit voltage by means of a multilayer perceptron neural network model trained using local experimental characterization data, which are acquired through a novel low cost characterization system incorporated into the deployed node. Both units—characterization and modelling—are controlled by the same low-cost microcontroller, providing a complete solution which can be understood as a virtual pilot cell, with identical characteristics to those of the specific small solar cell installed on the sensor node, that besides allows an easy adaptation to changes in the actual environmental conditions, panel aging, etc. Experimental comparison to a classical pilot panel based VOC algorithm show better efficiency under the same tested conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Fully-Integrated CMOS LDO Regulator for Battery-Operated On-Chip Measurement Systems

  • Perez-Bailon, J.
  • Marquez, A.
  • Calvo, B.
  • Medrano, N.
  • Martinez, P.A.
  • Sanz-Pascual, M.T.
This paper presents a fully-integrated 0.18 mu m CMOS low drop-out (LDO) regulator designed to drive on-chip low power frontend sensor nodes. The proposed LDO is based on a simple telescopic amplifier stage with internal cascode compensation driving a PMOS pass-device, providing a high precision 1.8 V output voltage for input voltages from 3.6 V to 1.92 V up to a 50 mA load current with only 22 mu A quiescent current. Line and load regulation are respectively better than 0.017 mV/V and 0.003 mV/mA, while recovery times are below 4 mu s over a (-40 degrees C, 120 degrees C) temperature span.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A CMOS Mixed Mode Non-Linear Processing Unit for Adaptive Sensor Conditioning in Portable Smart Systems

  • Martinez-Nieto, A.
  • Sanz-Pascual, M.T.
  • Marquez, A.
  • Perez-Bailon, J.
  • Calvo, B.
  • Medrano, N.
This paper presents the architecture of a novel non-linear digitally programmable analog unit for sensor output conditioning in battery-operated smart systems. Designed in an 180nm 1.8V standard CMOS technology, by properly setting the 6-bit registers in the arithmetic unit, the voltage inputs are weighted before being processed by a non-linear circuit. Thus, a processing system consisting of a set of these devices suitably tuned and interconnected can be applied to condition a non-linear sensor, improving its behavior both in linearity and operating range, while reducing the effects of cross sensitivity. The robustness of the digital weight tuning is tested simulating a chip-on-the-loop training using a Levenberg-Marquardt-based algorithm. Electric simulations of the proposed unit and the results of its application in a complete neural network-based processing system to improve the linear operating range of a thermistor are presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reliable Lifespan Evaluation of a Remote Environment Monitoring System Based on Wireless Sensor Networks and Global System for Mobile Communications

  • Antolin, D.
  • Medrano, N.
  • Calvo, B.
The use of wireless sensor networks (WSN) for monitoring physical and chemical variables in large areas allows density and frequency measurements which have been unavailable to date in classical measurement systems. To fully take advantage of this technology in a particular application, besides an accurate design and selection of all the components involved in its operation, it is essential to dispose of reliable lifetime estimation prior to deployment. This paper presents an experimental approach to determine the actual lifetime of such battery-operated systems, making use of a custom WSN architecture, and for different batteries technologies. To render a reliable evaluation, the energy consumption of the sensor nodes under their different operation modes, in correlation with the battery characteristics and the voltage regulation system, is jointly considered. The result is a complete and practical lifetime model, whose appropriate performance has been validated in a real deployment scenario.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A 0.18 µm CMOS LDO regulator for an on-chip sensor array impedance measurement system

  • Pérez-Bailón, J.
  • Márquez, A.
  • Calvo, B.
  • Medrano, N.
This paper presents a fully integrated 0.18 µm CMOS Low-Dropout (LDO) Voltage Regulator specifically designed to meet the stringent requirements of a battery-operated impedance spectrometry multichannel CMOS micro-instrument. The proposed LDO provides a regulated 1.8 V voltage from a 3.6 V to 1.94 V battery voltage over a -40 °C to 100 °C temperature range, with a compact topology (<0.10 mm2 area) and a constant quiescent current of only 7.45 µA with 99.985% current efficiency, achieving remarkable state-of-art Figures of Merit (FoMs) for the regulating-transient performance. Experimental measurements validate its suitability for the target application, paving the way towards the future achievement of a truly portable System on Chip (SoC) platform for impedance sensors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A CMOS self-contained quadrature signal generator for soc impedance spectroscopy

  • Márquez, A.
  • Pérez-Bailón, J.
  • Calvo, B.
  • Medrano, N.
  • Martínez, P.A.
This paper presents a low-power fully integrated quadrature signal generator for system-on-chip (SoC) impedance spectroscopy applications. It has been designed in a 0.18 µm-1.8 V CMOS technology as a self-contained oscillator, without the need for an external reference clock. The frequency can be digitally tuned from 10 to 345 kHz with 12-bit accuracy and a relative mean error below 1.7%, thus supporting a wide range of impedance sensing applications. The proposal is experimentally validated in two impedance spectrometry examples, achieving good magnitude and phase recovery results compared to the results obtained using a commercial LCR-meter. Besides the wide frequency tuning range, the proposed programmable oscillator features a total power consumption lower than 0.77 mW and an active area of 0.129 mm2, thus constituting a highly suitable choice as stimulation module for instrument-on-a-chip devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A multichannel FRA-based impedance spectrometry analyzer based on a low-cost multicore microcontroller

  • Sanchez-Gonzalez, A.
  • Medrano, N.
  • Calvo, B.
  • Martinez, P.A.
Impedance spectrometry (IS) is a characterization technique in which a voltage or current signal is applied to a sample under test to measure its electrical behavior over a determined frequency range, obtaining its complex characteristic impedance. Frequency Response Analyzer (FRA) is an IS technique based on Phase Sensitive Detection (PSD) to extract the real and imaginary response of the sample at each input signal, which presents advantages compared to FFT-based (Fast Fourier Transform) algorithms in terms of complexity and speed. Parallelization of this technique has proven pivotal in multi-sample characterization, reducing the instrumentation size and speeding up analysis processes in, e.g., biotechnological or chemical applications. This work presents a multichannel FRA-based IS system developed on a low-cost multicore microcontroller platform which both generates the required excitation signals and acquires and processes the output sensor data with a minimum number of external passive components, providing accurate impedance measurements. With a suitable configuration, the use of this multicore solution allows characterizing several impedance samples in parallel, reducing the measurement time. In addition, the proposed architecture is easily scalable.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-Linearity Self-Biased CMOS Current Buffer

  • Martinez-Nieto, J.A.
  • Sanz-Pascual, M.T.
  • Medrano-Marques, N.
  • Calvo-Lopez, B.
  • Sarmiento-Reyes, A.
A highly linear fully self-biased class AB current buffer designed in a standard 0.18 mu m CMOS process with 1.8 V power supply is presented in this paper. It is a simple structure that, with a static power consumption of 48 mu W, features an input resistance as low as 89 Omega, high accuracy in the input-output current ratio and total harmonic distortion (THD) figures lower than -60 dB at 30 mu A amplitude signal and 1 kHz frequency. Robustness was proved through Monte Carlo and corner simulations, and finally validated through experimental measurements, showing that the proposed configuration is a suitable choice for high performance low voltage low power applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

RF Power Amplifier Linearization in Professional Mobile Radio Communications Using Artificial Neural Networks

  • Gracia Saez, R.
  • Medrano Marques, N.
This paper is focused on the linearization of the radio frequency power amplifier of a professional digital handheld by means of an artificial neural network. The simplicity of the neural network that is used, together with the fact that a feedback path is unnecessary, makes this solution ideal to reduce both the cost of a handheld and its hardware complexity, while fully maintaining its performance. A compensation system is also needed to keep the linearization characteristics of the neural network stable against frequency, temperature, and voltage variations. The whole solution that comprises both the neural network and the compensation system has been implemented in the digital signal processor of a real handheld and afterward fully tested. It has proved to be satisfactory to meet the telecommunication standard requirements in all frequency, temperature, and voltage ranges under consideration while efficient to lower the computational cost of the handheld and to make its internal hardware simpler in comparison with other traditional linearization techniques. The results obtained demonstrate that a neural network can be used to linearize the power amplifiers that are used in transmitters of telecommunication equipment, leading to a significant reduction of both their hardware cost and complexity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-level modeling and simulation tool for sensor conditioning circuit based on artificial neural networks

  • Martinez-Nieto, Javier Alejandro
  • Medrano-Marques, Nicolás
  • Sanz-Pascual, María Teresa
  • Calvo-Lopez, Belén
For current microelectronic integrated systems, the design methodology involves different steps that end up in the full system simulation by means of electrical and physical models prior to its manufacture. However, the higher the circuit complexity, the more time is required to complete these simulations, jeopardizing the convergence of the numerical methods and, hence, meaning that the reliability of the results are not guaranteed. This paper shows the use of a high-level tool based on Matlab to simulate the operation of an artificial neural network implemented in a mixed analog-digital CMOS process, intended for sensor calibration purposes. The proposed standard tool enables modification of the neural model architecture to adapt its characteristics to those of the electronic system, resulting in accurate behavioral models that predict the complete microelectronic IC system behavior under different operation conditions before its physical implementation with a simple, time-efficient, and reliable solution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

LDMOS versus GaN RF power amplifier comparison based on the computing complexity needed to linearize the output

  • Gracia Saez, Raúl
  • Medrano Marqués, Nicolás
In order to maximize the efficiency of telecommunications equipment, it is necessary that the radio frequency (RF) power amplifier is situated as closely as possible to its compression ¿point. This makes its response nonlinear, and therefore it is necessary to linearize it, in order to minimize the interference that nonlinearities cause outside the useful band (adjacent channel). The system used for this linearization occupies a high percentage of the hardware and software resources of the telecommunication equipment, so it is interesting to minimize its complexity in order to make it as simple as possible. This paper analyzes the differences between the laterally diffused MOSFET (LDMOS) and gallium nitride (GaN) power amplifiers, in terms of their nonlinearity graphs, and in terms of the greater or lesser difficulty of linearization. A correct choice of power amplifier will allow for minimization of the linearization system, greatly simplifying the complexity of the final design.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low cost autonomous lock-in amplifier for resistance/capacitance sensor measurements

  • Maya, Paulina
  • Calvo, Belén
  • Sanz-Pascual, María Teresa
  • Osorio, Javier
This paper presents the design and experimental characterization of a portable high-precision single-phase lock-in instrument with phase adjustment. The core consists of an analog lock-in amplifier IC prototype, integrated in 0.18 µm CMOS technology with 1.8 V supply, which features programmable gain and operating frequency, resulting in a versatile on-chip solution with power consumption below 834 µW. It incorporates automatic phase alignment of the input and reference signals, performed through both a fixed-90° and a 4-bit digitally programmable phase shifter, specifically designed using commercially available components to operate at 1 kHz frequency. The system is driven by an Arduino YUN board, thus overall conforming a low-cost autonomous signal recovery instrument to determine, in real time, the electrical equivalent of resistive and capacitive sensors with a sensitivity of 16.3 µV/O @ erS < 3 % and 37 kV/F @ erS < 5 %, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A CMOS low pass filter for soc lock-in-based measurement devices

  • Pérez-Bailón, Jorge
  • Calvo, Belén
  • Medrano, Nicolás
This paper presents a fully integrated Gm–C low pass ¿lter (LPF) based on a current ¿steering Gm reduction-tuning technique, specifically designed to operate as the output stage of a SoC lock-in amplifier. To validate this proposal, a first-order and a second-order single-ended topology were integrated into a 1.8 V to 0.18 µm CMOS (Complementary Metal-Oxide-Semiconductor) process, showing experimentally a tuneable cutoff frequency that spanned five orders of magnitude, from tens of mHz to kHz, with a constant current consumption (below 3 µA/pole), compact size (<0.0140 mm2 /pole), and a dynamic range better than 70 dB. Compared to state-of-the-art solutions, the proposed approach exhibited very competitive performances while simultaneously fully satisfying the demanding requirements of on-chip portable measurement systems in terms of highly efficient area and power. This is of special relevance, taking into account the current trend towards multichannel instruments to process sensor arrays, as the total area and power consumption will be proportional to the number of channels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A 1.8 v Gm-C Highly Tunable Low Pass Filter for Sensing Applications

  • Perez-Bailon, J.
  • Calvo, B.
  • Medrano, N.
  • Ramirez-Angulo, J.
This paper presents a fully integrated, first-order Low Pass Filter with 2-tuning points giving a wide versatility to the filter. It allows for a fine/thick tuning with a cutoff frequency that spans over several orders of magnitude, from 220 mHz to 39.1 kHz. The Gm-C filter proposed is designed in a 180 nm CMOS technology with a total power consumption of 1.08 µW for a 1.8 V power supply and a dynamic range up to 73 dB. The proposed filter is a very competitive solution compared with previously reported works, meeting the requirements for portable on chip sensor interfaces based on impedance spectroscopy and biosignal front-end interfaces.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultralow-Power Synchronous Demodulation for Low-Level Sensor Signal Detection

  • Maya-Hernandez, P.M.
  • Calvo-Lopez, B.
  • Sanz-Pascual, M.T.
The design and experimental characterization of a high-resolution analog lock-in amplifier (LIA)-based measurement system is presented in this paper. Different design strategies are used to attain a versatile solution which features programmable gain (72.6-82.6 dB) and operating frequency (5-115 kHz), preserving good recovery performance. The prototype, integrated into the United Microelectronics Corporation 0.18-μm CMOS process with a single supply voltage of 1.8 V, achieves a resolution of 200 nV and a high dynamic reserve of 43.5 dB, showing significantly lower power consumption (885 μW) than high-resolution state-of-the-art LIAs with minimum size (0.075-mm 2 silicon area). To validate the amplitude recovery performance of the proposed single-phase LIA, it was used to measure the equivalent value of a passive resistive sensor, exhibiting a maximum error of 1.9% when RS is varied from 100 Ω to 10 kQ with an input signal in the order of hundreds of microvolts. Thus, it constitutes a highly suitable choice for portable and lab-on-a-chip sensing applications.