Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gas Sensing Properties of Perovskite Decorated Graphene at Room Temperature

  • Casanova-Cháfer, Juan
  • García-Aboal, Rocío
  • LLOBET, EDUARD
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] This paper explores the gas sensing properties of graphene nanolayers decorated with lead halide perovskite (CH3NH3PbBr3) nanocrystals to detect toxic gases such as ammonia (NH3) and nitrogen dioxide (NO2). A chemical-sensitive semiconductor film based on graphene has been achieved, being decorated with CH3NH3PbBr3 perovskite (MAPbBr3) nanocrystals (NCs) synthesized, and characterized by several techniques, such as field emission scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. Reversible responses were obtained towards NO2 and NH3 at room temperature, demonstrating an enhanced sensitivity when the graphene is decorated by MAPbBr3 NCs. Furthermore, the effect of ambient moisture was extensively studied, showing that the use of perovskite NCs in gas sensors can become a promising alternative to other gas sensitive materials, due to the protective character of graphene, resulting from its high hydrophobicity. Besides, a gas sensing mechanism is proposed to understand the effects of MAPbBr3 sensing properties, This work was funded in part by MINECO, MICINN and FEDER via grants no. RTI2018-101580-B-I00, by AGAUR under grant. 2017SGR 418 J.C.C gratefully acknowledges a doctoral fellowship from URV under the Marti i Franques fellowship program. E.L. is supported by the Catalan institution for Research and Advanced Studies via the 2012 and 2018 Editions of the ICREA Academia Award. P.A. acknowledges the financial support from the Spanish Government through 'Severo Ochoa"(SEV-2016-0683, MINECO) and PGC2018-099744-B-I00 (MCIU/AEI/FEDER, UE), and R.G.A. acknowledges FPI scholarship the Spanish Government-MINECO for a (TEC2015-74405-JIN), MAT2015-69669-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal Emission of Silicon at Near-Infrared Frequencies Mediated by Mie Resonances

  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • RAMIRO MANZANO, FERNANDO
  • GARÍN ESCRIVÁ, MOISÉS
  • Alcubilla, R.
[EN] Planck's law constitutes one of the cornerstones in physics. It explains the well-known spectrum of an ideal blackbody consisting of a smooth curve, whose peak wavelength and intensity depend on the temperature of the body. This scenario changes drastically, however, when the size of the emitting object is comparable to the wavelength of the emitted radiation. Here we show that a silicon microsphere (2-3 mu m in diameter) heated to around 800 degrees C yields a thermal emission spectrum consisting of pronounced peaks that are associated with Mie resonances. We experimentally demonstrate in the near-infrared the existence of modes with an ultrahigh quality factor, Q, of 400, which is substantially higher than values reported so far, and set a new benchmark in the field of thermal emission. Simulations predict that the thermal response of the microspheres is very fast, about 15 mu s. Additionally, the possibility of achieving light emission above the Planck limit at some frequency ranges is envisaged., This work was supported by several projects of the Spanish Ministry of Economy and Competitiveness (MINECO), Severo Ochoa program for Centers of Excellence (SEV-2016-0683), MAT2015-69669-PM, ENE2013-49984-EXP, ENE2015-74009-JIN (cofunded by the European Regional Development Fund), and of the Spanish Science, Innovation and Universities, PGC2018-099744-B-100. F.R.-M. thanks the financial contribution of MINECO through the program for young researchers support, TEC 2015 2015-74405-JIN. The authors greatly acknowledge the contribution of Prof. Francisco Meseguer for both the fruitful discussions and the revision of the manuscript, and Prof. Marie Louise McCarrey for careful proofreading of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Single Crystal Growth of Hybrid Lead Bromide Perovskites Using a Spin-Coating Method

  • García-Aboal, Rocío
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • RAMIRO MANZANO, FERNANDO
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] Synthesis and studies of single crystals of hybrid perovskite are important for achieving a better understanding of the optoelectronic phenomena occurring in this material and for improving ongoing applications. Here, we report on the growth of micrometer-size single crystals of methylammonium lead bromide (MAPbBr3) using the spin coating deposition method on a quartz substrate. We studied the influence of the rotation speed and the use of three different additives N-cyclohexyl-2-pyrrolidone, dimethyl sulfoxide, and 4-tert-butylpyridine on the crystal size and shape. The introduction of an additive in the precursor solution is revealed to be very useful for obtaining crystals with well-defined geometries and for decreasing the amount of defects. In this way, high-quality single crystals that sustain optical resonating modes were obtained and characterized by transmittance and photoluminescence measurements., Financial support from the Spanish Ministry of Economy and Competitiveness (Severo Ochoa, SEV-2016-0683), Intramural CSIC project 201680I006, and Fundacion Ramon Areces (XVII Concurso Nacional para la adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia) is gratefully acknowledged. Financial support was also provided by the Spanish Ministry of Economy and Competitiveness (Mineco) of Spain (TEC2015-74405-JIN), MAT2015-69669-P, and regional government grant PrometeoII/2017/026.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical properties of organic/inorganic perovskite microcrystals through the characterization of Fabry-Perot resonances

  • RAMIRO MANZANO, FERNANDO
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
  • García-Aboal, Rocío
  • Biasi, Stefano
[EN] A precise knowledge of the optical properties, specifically the refractive index, of organic/inorganic perovskites, is essential for pushing forward the performance of the current photovoltaic devices that are being developed from these materials. Here we show a robust method for determining the real and the imaginary part of the refractive index of MAPbBr(3) thin films and micrometer size single crystals with planar geometry. The simultaneous fit of both the optical transmittance and the photoluminescence spectra to theoretical models defines unambiguously the refractive index and the crystal thickness. Because the method relies on the optical resonance phenomenon occurring in these microstructures, it can be used to further develop optical microcavities from perovskites or from other optical materials., This work was supported by the Spanish ministry of Economy, Industry and Competitiveness (MINECO) through the projects TEC2015-74405-JIN, MAT2015-69669-P as well as the regional projects of both Provincia Autonoma di Trento (PAT) of Italy, through the call Grandi Progetti 2012: SIQURO and the Comunidad Valenciana of Spain project PrometeoII/2014/026.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Groove-assisted solution growth of lead bromide perovskite aligned nanowires: a simple method towards photoluminescent materials with guiding light properties

  • Isabelle Rodriguez|||0000-0001-5479-2494
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • RAMIRO MANZANO, FERNANDO
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
  • García-Aboal, Rocío
[EN] High refractive index nanowires are very attractive because of their waveguiding properties and their multiple applications. In this sense, metal halide perovskites, an emerging and appealing optoelectronic material, have also been tailored into nanowire structures. Here, we present an easy, low-cost and versatile method that has made possible to achieve nanowires of controlled and uniform width. The method has been applied here to all-inorganic and hybrid lead bromide perovskite (CsPbBr3 and CH3NH3PbBr3 respectively) materials. The procedure is based on the spin coating of precursor solutions, at room temperature, on a PDMS replica of the periodic grooves and lands of commercially available Compact Disc (CD) or Digital Versatile Disc (DVD) polycarbonate plates. The method can be applied for the synthesis of other material nanowires before being transferred onto other substrates. The obtained CsPbBr3 and CH3NH3PbBr3 nanowires exhibit high photoluminescence and guiding light properties along the material., The authors would like to gratefully acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness (MIMECO) (Severo Ochoa (SEV-2016-0683), MAT2015-69669-P projects) and Generalitat Valenciana (Prometeo II/2017/026 Excellency project). P. A. acknowledges the Fundacion Ramon Areces (XVII Concurso Nacional para la adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia) for its funding. F. R.-M. thanks the financial contribution of the Spanish Ministry of Economy and Competitiveness (MIMECO) through the program for young researchers support (TEC 2015 2015-74405-JIN). Finally, IR also thanks the Electron Microscopy Service of the Universitat Politecnica de Valencia for their support in FESEM image acquisition and FIB milling, as well as Ana Moreno for her help in template preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Propiedades optoelectrónicas en perovskitas halogenadas y su aplicación en energía y sensores

  • García Aboal, Rocío
[ES] La creciente urbanización e industrialización de las sociedades en las últimas décadas han provocado una alta demanda de energía. No obstante, mientras no se desarrollen fuentes de energía renovables que se constituyan como un reemplazo plausible de las actuales, la liberación de gases de efecto invernadero y sus consecuencias sobre el cambio climático difícilmente serán atajadas. Por ello, se está llevando a cabo una intensa búsqueda de energías renovables para un futuro inmediato. En los últimos años, la perovskita ha alcanzado una gran popularidad, centrando numerosos esfuerzos de investigación debido a sus propiedades ópticas y eléctricas únicas. Como por ejemplo su alto coeficiente de absorción y su alta movilidad de carga. Esta tesis comprende seis artículos científicos en torno a las perovskitas. Por un lado, 3 trabajos estudian los fenómenos ópticos que ocurren en el seno del material, con la finalidad de lograr una mejor comprensión de éstos. Puesto que el conocimiento de estos fenómenos ópticos a nivel individual (cristales aislados) permite modular y adaptar su síntesis y morfología para aplicaciones determinadas. Por otro lado, las perovskitas han sido implementadas en distintos dispositivos para su aplicación en tres campos: fotocatálisis, sensores y fotovoltaica. Por primera vez, se ha logrado utilizar este material para la obtención de hidrógeno llevando a cabo la reacción en fase vapor. Asimismo, diversas composiciones de perovskita se han usado para decorar grafeno y detectar niveles traza de Compuestos Orgánicos Volátiles (COV) como benceno y tolueno. Y finalmente se ha desarrollado una estrategia para insertar en la estructura de la perovskita moléculas orgánicas, de forma que se permite una ampliación de la fotorespuesta en el espectro visible. Por lo tanto, las perovskitas se han implementado exitosamente en aplicaciones de diversa índole, constituyéndose como un material prometedor y fácilmente adaptable a los distintos requisitos de cada campo de estudio., [CA] La creixent urbanització i industrialització de les societats durant les últimes dècades han provocat una alta demanda d'energia. No obstant això, fins que no es desenvolupen fonts d'energia renovables que puguen ser un reemplaçament plausible de les actuals, l'alliberament de gasos d'efecte hivernacle i les seues conseqüències sobre el canvi climàtic seran difícilment aturades. Per tant, s'està duent a terme una intensa cerca d'energies renovables per a un futur immediat. En els últims anys, la perovskita ha aconseguit una gran popularitat, centrant nombrosos esforços de recerca a causa de les seues propietats òptiques i elèctriques úniques. Per exemple, el seu al coeficient d'absorció i la seua alta mobilitat de càrrega. Aquesta tesi reuneix sis articles científics al voltant de les perovskites. Per una banda, 3 treballs estudien els fenòmens òptics que ocorren en el material, amb la finalitat d'assolir una major comprensió d'aquests. Donat que el coneixement d'aquests fenòmens òptics a nivell individual (cristalls aïllats) permeten modular i adaptar la seua síntesi i morfologia per a determinades aplicacions. Per altra banda, les perovskites han sigut implementats en diferents dispositius per a la seua aplicació en tres camps: fotocatàlisi, sensors i fotovoltaica. Per primera vegada, s'hi ha aconseguit utilitzar aquest material per a l'obtenció d'hidrogen duent a terme la reacció en fase vapor. Així mateix, diverses composicions de perovskita s'han utilitzat per a decorar grafè i detectar nivells traça de Compostos Orgànics Volàtils (COV) com benzè i toluè. I finalment s'ha desenvolupat una estratègia per a inserir en l'estructura de la perovskita molècules orgàniques, de forma que es permet una ampliació de la fotoresposta en l'espectre del visible. Per tant, les perovskites s'han implementat exitosament en aplicacions de diversa índole, constituint-se com un material prometedor i fàcilment adaptable als diferents requisits de cada camp d'estudi., [EN] During the last decades, the growing urbanization and industrialization result in a significant need for energy. However, since feasible renewable energy sources should be further developed to replace the current energy source, the release of greenhouse gases and their climate change consequences are difficult to overcome. For that reason, the development of renewable energy sources has been attracting growing research efforts. Recently, perovskites gathered great interest owing to their outstanding optical and electrical properties. For instance, their high absorption coefficient and superior charge mobility. This thesis comprises six scientific articles about perovskites. On one hand, 3 works study the optical phenomena that occur within the material in order to achieve a better understanding. The deep knowledge of these optical phenomena's at the individual level (isolated crystals) enable the modulation and tuning of their synthesis and morphology to match specific applications. On another hand, perovskites have been implemented in several devices for their application in three research fields: photocatalysis, sensors, and photovoltaic. For the first time, this nanomaterial was successfully employed for obtaining hydrogen carrying out the reaction in the vapor phase. Likewise, several perovskite compositions have been used for decorating graphene and detect trace levels of Volatile Organic Compounds (VOC) as benzene and toluene. And finally, it has been developed a strategy to insert organic molecules in the perovskite structure, resulting in an enhanced photoresponse in the visible range. Therefore, perovskites have been successfully implemented in several applications, becoming a promising material and easily adaptable to the different requirements needed in each field of study., Financial support from the Spanish Ministry of Economy and Competitiveness (Severo Ochoa, SEV-2016-0683), Intramural CSIC project 201680I006, and Fundación Ramón Areces (XVII Concurso Nacional para la adjudicación de Ayudas a la Investigación en Ciencias de la Vida y de la Materia) is gratefully acknowledged. This research was financially supported by the Spanish Ministry of Economy and Competitiveness (Mineco) of Spain (TQ2011-26455)2, MAT2015-69669-P, and regional government grant PrometeoII/2017/026. This work was supported by Spanish ministry of Economy, Industry and Competitiveness (MINECO) through the projects TEC2015-74405-JIN, MAT2015-69669-P as well as the regional projects of both Provincia Autonoma di Trento (PAT) of Italy, through the call Grandi Progetti 2012: SIQURO and the Comunidad Valenciana of Spain project PrometeoII/2014/026. This work was supported in part by MICINN and FEDER via grants no. RTI2018-101580- B-I00, by AGAUR under grant. 2017SGR418. S. R.-B. thanks the Research Executive Agency (REA) and the European Commission for the funding received under the Marie Skłodowska Curie actions (H2020-MSCA-IF-2015/Grant agreement number 709023/ZESMO). R. G. A. acknowledges the FPI scholarship from MINECO MAT2015-69669-P. P. A. acknowledges the financial support from the Spanish Government through ‘Severo Ochoa” (SEV-2016-0683, MINECO) and PGC2018-099744-B-I00 (MCIU/AEI/FEDER)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Groove-assisted solution growth of lead bromide perovskite aligned nanowires: A simple method towards photoluminescent materials with guiding light properties

  • Rodríguez, Isabelle
  • Fenollosa, Roberto
  • Ramiro-Manzano, F.
  • García-Aboal, R.
  • Atienzar, Pedro
  • Meseguer, Francisco
High refractive index nanowires are very attractive because of their waveguiding properties and their multiple applications. In this sense, metal halide perovskites, an emerging and appealing optoelectronic material, have also been tailored into nanowire structures. Here, we present an easy, low-cost and versatile method that has made possible to achieve nanowires of controlled and uniform width. The method has been applied here to all-inorganic and hybrid lead bromide perovskite (CsPbBr and CHNHPbBr respectively) materials. The procedure is based on the spin coating of precursor solutions, at room temperature, on a PDMS replica of the periodic grooves and lands of commercially available Compact Disc (CD) or Digital Versatile Disc (DVD) polycarbonate plates. The method can be applied for the synthesis of other material nanowires before being transferred onto other substrates. The obtained CsPbBr and CHNHPbBr nanowires exhibit high photoluminescence and guiding light properties along the material., The authors would like to gratefully acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness (MIMECO) (Severo Ochoa (SEV-2016-0683), MAT2015-69669-P projects) and Generalitat Valenciana (Prometeo II/2017/026 Excellency project). P. A. acknowledges the Fundación Ramón Areces (XVII Concurso Nacional para la adjudicación de Ayudas a la Investigación en Ciencias de la Vida y de la Materia) for its funding. F. R.-M. thanks the financial contribution of the Spanish Ministry of Economy and Competitiveness (MIMECO) through the program for young researchers support (TEC 2015 2015-74405-JIN). Finally, IR also thanks the Electron Microscopy Service of the Universitat Politècnica de València for their support in FESEM image acquisition and FIB milling, as well as Ana Moreno for her help in template preparation, We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical properties of organic/inorganic perovskite microcrystals through the characterization of Fabry-Pérot resonances

  • Ramiro-Manzano, F.
  • García-Aboal, R.
  • Fenollosa, Roberto
  • Biasi, S.
  • Rodríguez, Isabelle
  • Atienzar, Pedro
  • Meseguer, Francisco
A precise knowledge of the optical properties, specifically the refractive index, of organic/inorganic perovskites, is essential for pushing forward the performance of the current photovoltaic devices that are being developed from these materials. Here we show a robust method for determining the real and the imaginary part of the refractive index of MAPbBrthin films and micrometer size single crystals with planar geometry. The simultaneous fit of both the optical transmittance and the photoluminescence spectra to theoretical models defines unambiguously the refractive index and the crystal thickness. Because the method relies on the optical resonance phenomenon occurring in these microstructures, it can be used to further develop optical microcavities from perovskites or from other optical materials., This work was supported by the Spanish ministry of Economy, Industry and Competitiveness (MINECO) through the projects TEC2015-74405-JIN, MAT2015-69669-P as well as the regional projects of both Provincia Autonoma di Trento (PAT) of Italy, through the call Grandi Progetti 2012: SIQURO and the Comunidad Valenciana of Spain project PrometeoII/2014/026.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perovskite@graphene nanohybrids for breath analysis: A proof-of-concept

  • Casanova-Cháfer, Juan
  • García-Aboal, R.
  • Atienzar, Pedro
  • Bittencourt, Carla
  • Llobet, Eduard
Nanohybrids comprising graphene loaded with perovskite nanocrystals have been demonstrated as a potential option for sensing applications. Specifically, their combination presents an interesting synergistic effect owing to greater sensitivity when bare graphene is decorated with perovskites. In addition, since the main drawback of perovskites is their instability towards ambient moisture, the hydrophobic properties of graphene can protect them, enabling their use for ambient monitoring, as previously reported. However not limited to this, the present work provides a proof-of-concept to likewise employ them in a potential application as breath analysis for the detection of health-related biomarkers. There is a growing demand for sensitive, non-invasive, miniaturized, and inexpensive devices able to detect specific gas molecules in human breath. Sensors gathering these requirements may be employed as a screening tool for reliable and fast detection of potential health issues. Moreover, perovskite@graphene nanohybrids present additional properties highly desirable as the capability to be operated at room temperature (i.e., reduced power consumption), reversible interaction with gases (i.e., reusability), and long-term stability. Within this perspective, the combination of both nanomaterials, perovskite nanocrystals and graphene, possibly includes the main requirements needed, being a promising option to be employed in the next generation of sensing devices., This research was supported in part by MICINN and FEDER via grants no. RTI2018-101580-B-I00, by AGAUR under grant 2017SGR418 and by Belgian Fund for Scientific Research under FRFC contract J001019. J.C.C. gratefully acknowledges a postdoctoral fellowship from URV. R.G.A. acknowledges an FPI scholarship from MINECO TEC2015-74405-JIN and MAT2015-69669-P. P.A. acknowledges the financial support from the Spanish Government through “Severo Ochoa” (SEV-2016-0683, MINECO) and PGC2018-099744-B-I00 (MCIU/AEI/FEDER). E.L. is supported by the Catalan institution for Research and Advanced Studies via the 2018 Edition of the ICREA Academia Award. C.B. is a research associate at the National Funds for Scientific Research (FRS-FNRS, Belgium).