Pasar al contenido principal

AUMENTO DE LA INTELIGENCIA, CAPACIDADES COGNITIVAS Y CREACION DE VALOR EN LAS TECNOLOGIAS DE COMUNICACION PARA LA IOE

TEC2016-76465-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD POLITÉCNICA DE CARTAGENA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Combined Demand-Response and Wind Power Plant Participation in Frequency Control for Multi-Area Power Systems

  • Muñoz-Benavente, Irene
  • Hansen, Anca D.
  • Gómez-Lázaro, Emilio
  • Fernández-Guillamón, Ana
  • Molina-García, Ángel
  • García-Sánchez, Tania María|||0000-0001-5762-5325
[EN] An alternative approach for combined frequency control in multi-area power systems with significant wind power plant integration is described and discussed in detail. Demand response is considered as a decentralized and distributed resource by incorporating innovative frequency-sensitive load controllers into certain thermostatically controlled loads. Wind power plants comprising variable speed wind turbines include an auxiliary frequency control loop contributing to increase total system inertia in a combined manner, which further improves the system frequency performance. Results for interconnected power systems show how the proposed control strategy substantially improves frequency stability and decreases peak frequency excursion (nadir) values. The total need for frequency regulation reserves is reduced as well. Moreover, the requirements to exchange power in multi-area scenarios are significantly decreased. Extensive simulations under power imbalance conditions for interconnected power systems are also presented in the paper., This work was partially supported by by the Regional Seneca Foundation of Spain through the research projects 08747/PI/08 and 19379/PI/14. This work was also supported by project AIM, Ref. TEC2016-76465-C2-1-R (AEI/FEDER, UE). This work was financially supported by the Regional Seneca Foundation of Spain through the research projects 08747/PI/08 and 19379/PI/14.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

QoE en el contexto de Internet of Everything

  • Cano, Maria-Dolores
[ES] La investigación y el desarrollo hacia la Internet of Everything (IoE) inteligente es un empeño ambicioso y altamente interdisciplinar que debe abordarse en los diferentes niveles de su arquitectura. Un efecto colateral de esta separación se produce en la medición de la calidad de los servicios proporcionados y en cómo evaluar sus prestaciones. La calidad de experiencia de usuario (Quality of user Experience, QoE) se ha convertido en un marco de referencia de evaluación de prestaciones capaz de acoger los nuevos requisitos y demandas de este nuevo paradigma. En este artículo, proporcionamos una visión actual de la QoE en la IoE. Para ello, realizamos un estudio de las propuestas de medición de QoE, de las métricas que se sugieren para su modelado y sus relaciones. Como resultado, se identifica la necesidad de un nuevo enfoque para la evaluación de prestaciones de los servicios y aplicaciones de la IoE capaz de capturar su idiosincrasia, es decir, las nuevas métricas que definen calidad, nivel de conocimiento, nivel de inteligencia, consumo, etc., así como la carencia de un modelado entre los diferentes componentes de la QoE en IoE., This research was supported by the AEI/FEDER, UE project grant TEC2016-76465-C2-1-R (AIM).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Sistemas de gestión de contenido web: Uso y estudio comparativo inicial de su seguridad

  • Aledo-Hernández, Antonio-José
  • Guillén-Pérez, Antonio
  • Martinez-Caro, Jose-Manuel
  • Sanchez-Iborra, Ramon
  • Cano, Maria-Dolores
[ES] Los Sistemas de Gestión de Contenido Web (Web Content Management Systems, WCMS) han ganado mucha popularidad debido a la facilidad que aportan a la hora de crear páginas o portales web, sites de comercio electrónico, etc. En este trabajo se explica de forma resumida cómo es el manejo los WCMS y qué se puede lograr con su uso. Para ello, trabajaremos con tres de los más populares WCMS de tipo open-source empleados hoy en día, Joomla, Wordpress y Drupal, y veremos las ventajas e inconvenientes de trabajar con cada uno de ellos. Con este fin, crearemos tres web iguales en requisitos y funcionalidades, una con cada WCMS, y se analizará cualitativamente la complejidad de cada uno de ellos. Finalmente, realizaremos un análisis básico de seguridad de las webs creadas, informando de sus posibles vulnerabilidades, explicando cómo mejorar su seguridad, qué fallos no debemos cometer y qué WCMS es inicialmente más seguro/vulnerable., This research was supported by the AEI/FEDER, UE project grant TEC2016-76465-C2-1-R (AIM).
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Stability of synchronous queued RFID networks

  • Vales Alonso, Javier
  • López Matencio, Pablo
  • Alcaraz, Juan José
  • González Castaño, Francisco Javier
Queued Radio Frequency Identification (RFID) networks arise naturally in many applications, where tags are grouped into batches, and each batch must be processed before the next reading job starts. In these cases, the system must be able to handle all incoming jobs, keeping the queue backlogs bounded. This property is called stability. Besides, in RFID networks, it is common that some readers cannot operate at the same time, due to mutual interferences. This fact reduces the maximum traffic that readers can process since they have to share the channel. Synchronous networks share the channel using a TDMA approach. The goal of this work is to analytically determine whether a synchronous queued RFID network attains stable operation under a given incoming traffic. Stability depends on the service rate, which is characterized in this paper using an exact numerical method based on a recursive analytical approach, overcoming the limitations of previous works, which were based on simplifications. We also address different flow optimization problems, such as computing the maximum joint traffic that a network can process stably, selecting the minimal number of readers to process a given total load, or determining the optimal timeslot duration, which are novel in the RFID literature., Ministerio de Economía, Industria y Competitividad | Ref. TEC2016-76465-C2-1-R
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

A comparative performance evaluation of routing protocols for flying ad-hoc networks in real conditions

  • Guillén Pérez, Antonio
  • Montoya, Ana María
  • Aarnoutse Sánchez, Juan Carlos Jacobo
  • Cano Baños, María Dolores
Unmanned aerial vehicles (UAVs) are widely used in our modern society and their development is rapidly accelerating. Flying Ad Hoc Networks (FANETs) have opened a new window of opportunity to create new value-added services. However, the characteristics that make FANETs unique, such as node mobility, node distance, energy constraints, etc., imply that several guidelines need to be considered for their successful deployment. Although numerous routing protocols have been proposed for FANETs, due to the wide range of applications in which FANETs can be applied, not all routing protocols can be used. Due to this challenge, after breaking down and classifying the different types of existing routing protocols for FANET, this paper analyzes and compares the performance of several routing protocols (Babel, BATMAN-ADV, and OLSR) in terms of throughput and packet loss in a real deployment composed of several UAV nodes using 2.4 and 5 GHz WiFi networks. The results show that Babel achieves better performance in the studied metrics than OLSR and BATMAN-ADV, while BATMAN-ADV delivers significantly lower performance. This experimental study confirms the importance of choosing the proper routing protocol for FANETs and their performance evaluation, something that will be extremely important in a few years when this type of network will be common in our day-to-day life., This research was funded by the AEI/FEDER, UE project grant TEC2016-76465-C2-1-R (AIM), project SPID202000X116746SV0 (AriSe2: FINe), and 20740/FPI/18. Fundación Séneca. Región de Murcia (Spain).
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

Preserving data privacy in the internet of medical things using dual signature ECDSA

  • Cano Baños, María Dolores
  • Cañavate Sánchez, Antonio
.e disclosure of personal and private information is one of the main challenges of the Internet of Medical .ings (IoMT). Most IoMT-based services, applications, and platforms follow a common architecture where wearables or other medical devices capture data that are forwarded to the cloud. In this scenario, edge computing brings new opportunities to enhance the operation of IoMT. However, despite the benefits, the inherent characteristics of edge computing require countermeasures to address the security and privacy issues that IoMT gives rise to. .e restrictions of IoT devices in terms of battery, memory, hardware resources, or computing capabilities have led to a common agreement for the use of elliptic curve cryptography (ECC) with hardware or software implementations. As an example, the elliptic curve digital signature algorithm (ECDSA) is widely used by IoT devices to compute digital signatures. On the other hand, it is well known that dual signature has been an effective method to provide consumer privacy in classic e-commerce services. .is article joins both approaches. It presents a novel solution to enhanced security and the preservation of data privacy in communications between IoMTdevices and the cloud via edge computing devices. While data source anonymity is achieved from the cloud perspective, integrity and origin authentication of the collected data is also provided. In addition, computational requirements and complexity are kept to a minimum., This research was supported by the AEI/FEDER EU project grant (AIM) (TEC2016-76465-C2-1-R).
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

A software-defined networking framework to provide dynamic qos management in ieee 802.11 networks

  • Manzanares López, Pilar
  • Malgosa Sanahuja, José María
  • Muñoz Gea, Juan Pedro
In this paper, the concept of SDN (Software Defined Networking) is extended to be applied to wireless networks. Traditionally, in a wired SDN environment, the OpenFlow protocol is the communication protocol used to configure the flow table of forwarding elements (i.e., switches and Access Points). However, although in IEEE 802.11 networks there is no concept of forwarding, the SDN paradigm could also be applied to set up the wireless network dynamically, in order to improve the performance. In this case, not only the network elements, that is the Access Points, but also the mobile elements should configure their link and physical layers parameters following the guidelines of a centralized SDN controller. In particular, we propose a mechanism called DEDCA (Dynamic Enhanced Distributed Channel Access) to manage the channel access in wireless networks, and a framework that enables its implementation in 802.11-based wireless networks using SDN technology. The key aspect of this alternative solution is the control over the contention window size of the wireless terminals. Thus, an adequate response to dynamic and short-term Quality of Service (QoS) requirements can be offered to services running on these networks. DEDCA mechanism relies upon the use of a scalar parameter called gain. The mathematical model which has allowed us to obtain this parameter is presented and evaluated in this paper. Finally, the usefulness of the proposed solutions have been evaluated by means of their implementation in an example case., This work has been supported by the AEI/FEDER, UE Project Grants TEC2016-76465-C2-1-R (AIM).
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

Using artificial vision for measuring the range of motion

  • Rosique Contreras, María Francisca
  • Losilla López, Fernando
  • Navarro Lorente, Pedro Javier
Measurement of joint range of motion is a common measure in the functional evaluation of a patient. This clinical measurement is performed through the use of mechanical goniometry, currently presenting various problems mainly of a human nature. This article introduces ROMCam, an alternative system for measuring joint range of motion, based on estimating the human pose in 2D. For this, use is made of artificial vision libraries and the use of an RGB webcam type camera. The results obtained corroborate the validity of the use of ROMCam as a low cost, accessible tool that can even be used as a resource in telerehabilitation treatments., Este trabajo ha sido financiado por el proyecto MINECO/FEDER con identificador TEC2016-76465-C2-1-R (AIM) y por el “Research Program for Groups of Scientific Excellence in the Region of Murcia" de la Fundación Seneca (Agency for Science and Technology in the Region of Murcia – 19895/GERM/15), España.
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

Pedestrian characterisation in urban environments combining WiFi and AI

  • Guillén Pérez, Antonio
  • Cano Baños, María Dolores
Knowing how many people there are in a given scenario offers new possibilities for the development of intelligent services. With this goal in mind, the use of sensors and Radio Frequency (RF) signals is becoming an interesting alternative to other classic methods such as image processing for counting people. In this paper we present a novel method for counting, characterizing, and localizing pedestrians in outdoor environments, called iPCW (intelligent Pedestrian Characterization using WiFi). iPCW is a passive, device-based sensor system that incorporates artificial intelligence techniques, more specifically, machine learning techniques. Performance evaluation using intensive computer simulations shows that iPCW achieves excellent results, with moving and static pedestrian detection accuracy above 98% and positioning accuracy above 92%., This work was supported by DGT Ministerio del Interior (Spain) under Project SPIP2017-02230; by the AEI/FEDER EU project grant TEC2016-76465-C2-1-R (AIM), and by a pre-doctoral grant 20740/FPI/18. Fundación Séneca. Región de Murcia (Spain).
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

On the identification and prediction of stalling events to improve QoE in video streaming

  • Martínez Caro, José Manuel
  • Cano Baños, María Dolores
Monitoring the Quality of user Experience is a challenge for video streaming services. Models for Quality of User Experience (QoE) evaluation such as the ITU-T Rec. P.1203 are very promising. Among the input data that they require are the occurrence and duration of stalling events. A stalling even5 is an interruption in the playback of multimedia content, and its negative impact on QoE is immense. Given the idiosyncrasy of this type of event, to count it and its duration is a complex task to be automated, i.e., without the participation of the user who visualizes the events or without direct access to the final device. In this work, we propose two methods to overcome these limitations in video streaming using the DASH framework. The first method is intended to detect stalling events. For simplicity, it is based on the behavior of the transport layer data and is able to classify an IP packet as belonging (or not) to a stalling event. The second method aims to predict if the next IP packet of a multimedia stream will belong to a stalling event (or not), using a recurrent neural network with a variant of the Long Short–Term Memory (LSTM). Our results show that the detection model is able to spot the occurrence of a stalling event before being experienced by the user, and the prediction model is able to forecast if the next packet will belong to a stalling event with an error rate of 10.83%, achieving an F1 score of 0.923., This research was supported by the AEI/FEDER, EU project grant TEC2016-76465-C2-1-R (AIM) and project SPID202000-116746SV0 (AriSe2: FINe).
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

Intelligent IoT systems for traffic management: A practical application

  • Guillén Pérez, Antonio
  • Cano Baños, María Dolores
The incorporation of Artificial Intelligence algorithms in Intelligent Transportation Systems gives rise to new opportunities for a more sustainable urban mobility. However, one of the main challenges is to decide when and where these techniques should be applied; several options appear, such as cloud computing, fog computing, edge computing, or even edge devices. In this paper, an Internet of Things-based solution for smart traffic management is presented. Using the lightweight Random Early Detection for Vehicles Dynamic mechanism as a basis, we optimize using evolutionary algorithms. Random Early Detection for Vehicles Dynamic can be applied in signaled intersections to proactively detect incipient congestion and set the best cycle and phases of traffic lights. Then, the authors demonstrate that once Random Early Detection for Vehicles Dynamic has been appropriately optimised offline, it can be later used in unknown traffic scenarios without the burden of applying Artificial Intelligence in constrained Internet of Things devices. The performance of this mechanism is widely tested with the SUMO simulation tool. Results show that this improved version, called iREDVD, notably reduces the vehicles’ waiting time, average trip time, fuel consumption, and emission of particles and gaseous pollutants compared with other proposals., This work was supported by the AEI/FEDER, UE project grant TEC2016-76465-C2-1-R (AIM), by DGT-Ministerio delInterior, project grant SPIP2017-02230 (STREET), and by a predoctoral contract for the formation of the research personnel financed by Consejería de Empleo, Universidades, Empresay Medio Ambiente of the CARM, through the FundaciónSéneca - Agencia de Ciencia y Tecnología of the Region of Murcia, Spain.
Repositorio Digital UPCT
Publicación Contribución de congreso (ConferenceOutput)

An MPTCP-compatible load balancing solution for pools of servers in OpenFlow SDN networks

  • Manzanares López, Pilar
  • Muñoz Gea, Juan Pedro
  • Malgosa Sanahuja, José María
MultiPath TCP (MPTCP) protocol splits one transport connection into multiple subflows that are treated as normal TCP flows by the network layer. Therefore, the MPTCP subflows are able to use different physical paths between the origin and the destination points. This TCP extension can be used in datacenters to improve communication performance. On the other hand, load balancing techniques are employed in these scenarios to avoid the overload of the systems. When load balancing is combined with MPTCP it is necessary that the subflows belonging to the same MPTCP session are established with the same server in the datacenter. In this work we describe and prove two MPTCP-compatible solutions based on OpenFlow SDN technology that allow the implementation of load balancing services in the presence of MPTCP traffic., This work has been supported by the AEI/FEDER, UE Project Grants TEC-2016-76465-C2-1-R (AIM).
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

A virtualized infrastructure to offer network mapping functionality in SDN networks

  • Manzanares López, Pilar
  • Muñoz Gea, Juan Pedro
  • Malgosa Sanahuja, José María
  • Flores De La Cruz, Adrían
The separation of control and forwarding planes in software-defined networking (SDN) networks is a key issue of the SDN technology. This feature and the existence of the SDN controller allow the developing of dynamic, adaptable and manageable networks, networks that require adequate services, and applications. However, the separation of these planes prevents the use of existing powerful tools that were coded considering traditional networks. In this paper, we make use of the potential of network virtualization (NV) technologies to propose the use of a virtualized infrastructure that makes possible the incorporation of these existing services and/or applications to an SDN network, without the need for programming additional and complex software modules in the SDN controller. Thus, in this paper, NV is not employed to develop a network managed by SDN but to broaden and give support to the SDN control layer. As an example, we describe the incorporation of nmap (a versatile and powerful tool widely used by security experts for network exploration) into the SDN framework. It is only necessary to develop a simple control plane service that thanks to the proposed virtualized infrastructure allows the inclusion of this powerful management application. The result offers the complete functionality of the nmap utility to the network administrators, who control the SDN network through the out-of-band control plane. In addition, a northbound REST API has been defined to offer the main functionality of the tool (host discovery, port scanning, and operating system detection) to the application layer., This work was supported by the MINECO/FEDER Project Grants TEC2013-47016-C2-2-R (COINS) and TEC2016-76465-C2-1-R (AIM).