Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of Atomicity and Interface on InOx-TiO2 Composites: Thermo-Photo Valorization of CO2

  • Sayago-Carro, Rocío
  • Barba-Nieto, Irene
  • Caudillo-Flores, Uriel
  • Tolosana-Moranchel, Álvaro
  • Rodríguez, José A.
  • Fernández García, Marcos
  • Kubacka, Anna
The synthesis, physicochemical, and functional properties of composite solids resulting from the surface spread of oxidized indium species onto nanoplatelets of anatase were investigated. Both the size and the interaction between the indium- and titanium-containing components control the functional properties. In the reduction of CO2 to CO, the best samples have an indium content between ca. 2 and 5 mol % and showed an excess rate over the photo and thermo-alone processes above 33% and an energy efficiency of 1.3%. Subnanometric (monomeric and dimeric) indium species present relatively weak thermal catalytic response but strong thermo-photo promotion of the activity. A gradual change in functional properties was observed with the growth of the indium content of the solids, leading to a progressive increase of thermal activity but lower thermo-photo promotion. The study provides a well-defined structure-activity relationship rationalizing the dual thermo-photo properties of the catalysts and establishes a guide for the development of highly active and stable composite solids for the elimination and valorization of CO2., Authors acknowledge the financial support through grants and TED2021-129506B–C21 and PID2022-136883OB-C21. Both projects are funded by MCIN/AEI/10.13039/501100011033 and the first is cofunded by the European Union Next Generation EU/PRTR. This work was also funded by the PAPIIT DGAPA-UNAM projects: IN116424 and IN112922. R.S-C. is grateful to the PhD program in Applied Chemistry of the Universidad Autónoma de Madrid. I.B.-N. is supported by the Brookhaven National Laboratory Goldhaber Distinguished Fellowship. The XAS measurement used resources 8-ID (ISS) of the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under contract no. DE-SC0012704., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In2O3-TiO2 Composites for CO2 Photothermocatalytic Valorization

  • Mena Saucedo, Alejandra
  • Caudillo-Flores, Uriel
  • Kubacka, Anna
  • Fernández García, Marcos
Morphologically controlled indium oxide nanocubes were synthesized, contacted with pure anatase nanoparticles, and used in the dual photothermocatalytic valorization of carbon dioxide. The series of samples with an indium oxide loading up to 20 wt % were subjected to a detailed physicochemical analysis. The catalysts synthesized are high surface area mesoporous materials. Interface effects coming from the contact between the two oxide components were analyzed and found to control the charge carrier recombination taking place under illumination. The catalytic activity under dual photothermo conditions showed optimum profit of the combination of the two energy sources with a sample having a 10 wt % of indium oxide. This sample shows a synergistic use of the dual excitation with an excess of ca. 50% as measured by the reaction rate. This excess appears at the top of the literature. The synergy observed would be linked with the optoelectronic effects controlled by the oxide-oxide interface. (Figure presented.), Authors acknowledge the financial support through grants and TED2021-129506B-C21 and PID2022-136883OB-C21. Both projects are funded by MCIN/AEI/10.13039/501100011033 and the first is cofunded by the European Union Next Generation EU/PRTR. This work was also funded by the PAPIIT DGAPA-UNAM projects: IN116424 and IN112922. R. S–C., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing Materials to Boost the Valorization of CO2: Tuning Cobalt-Cobalt Interactions on In2O3-Based Photothermal Catalysts

  • Sayago-Carro, Rocío
  • Barba-Nieto, Irene
  • Gómez Cerezo, Natividad
  • Rodríguez, José A.
  • Fernández García, Marcos
  • Kubacka, Anna
The valorization of CO2 is an important challenge within the current panorama, since this molecule is probably the main contributor to climate change. In this study, the synthesis of materials based on a nanostructured batonnet-type indium oxide is carried out. In them, different amounts of Co are introduced, varying between 2 and 8% mol. It is verified that the most active sample in the transformation of carbon dioxide to carbon monoxide contains 6 mol %. of Co. This sample's activity under dual excitation exceeds the thermal counterpart by more than 30%. After carrying out a complete physical and chemical characterization with the help of X-ray absorption spectroscopy and other techniques, it is shown that catalysts with amounts of cobalt equal to or below 4 mol % contain isolated single-atom species, while those with higher amounts of metal display a Co-Co interaction which triggers the evolution of the samples under reaction conditions. The optimum control of this Co-Co interaction and the nature of the final cobalt-containing species determine dual photothermal catalytic properties. This work establishes a structure-activity relationship to interpret the catalytic behavior of highly dispersed subnanometric cobalt species, and thus an avenue to optimize the photothermal valorization of carbon dioxide., Authors acknowledge the financial support through grants and TED2021-129506B-C21 and PID2022-136883OB-C21. All projects are funded by MCIN/AEI/10.13039/501100011033, and the first two are cofunded by the European Union Next Generation EU/PRTR. R.S.-C. is grateful to the PhD program in Applied Chemistry of the Universidad Autónoma de Madrid. I.B.-N. is supported by the Brookhaven National Laboratory Goldhaber Distinguished Fellowship. The work done at the Chemistry Division of BNL was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, and Catalysis Science Program under contract No. DE-SC0012704. The XAS measurement used resources 8-ID (ISS) of the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under contract no. DE-SC0012704., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomic and Electronic Structures of Co-Doped In2O3 from Experiment and Theory

  • Voccia, Maria
  • Kapse, Samadhan
  • Sayago-Carro, Rocío
  • Gómez Cerezo, Natividad
  • Fernández García, Marcos
  • Kubacka, Anna
  • Viñes, Francesc
  • Illas, Francesc
The synthesis and properties of stoichiometric, reduced, and Co-doped In2O3 are described in the light of several experimental techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ultraviolet (UV)-visible spectroscopy, porosimetry, and density functional theory (DFT) methods on appropriate models. DFT-based calculations provide an accurate prediction of the atomic and electronic structure of these systems. The computed lattice parameter is linearly correlated with the experimental result in the Co concentration ranging from 1.0 to 5.0%. For higher Co concentrations, the theoretical-experimental analysis of the results indicates that the dopant is likely to be preferentially present at surface sites. The analysis of the electronic structure supports the experimental assignment of Co2+ for the doped material. Experiments and theory find that the presence of Co has a limited effect on the material band gap., The present work received financial support from the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (AEI) MCIN/AEI/10.13039/501100011033 and, as appropriate, by “European Union Next Generation EU/PRTR”, through grants TED2021-129506B–C21 and TED2021-129506B–C22, PID2021-126076NB-I00, PID2022-136883OB-C21, la Unidad de Excelencia María de Maeztu CEX2021-001202-M granted to the ITQCUB and, in part, from COST Action CA18234 and Generalitat de Catalunya 2021SGR00079 grant., With funding from the Spanish goverment through the "María de Maeztu Unit of Excellence" accreditation (CEX2021-001202-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activity and selectivity for CO2 methanation of clusters and nanoplates of ruthenium dispersed on ceria: In-situ studies with XAFS and DRIFTS

  • Barba-Nieto, Irene
  • Fernández García, Marcos
  • Moncada, Jorge
  • Lenz, Guilherme Felipe
  • Jimenez, Juan D.
  • Hwang, Sooyeon
  • Tayal, Akhil
  • Senanayake, Sanjaya D.
  • Kubacka, Anna
  • Rodríguez, José A.
The performance of Ru/CeO2 catalysts under CO2 hydrogenation conditions was studied using in situ X-ray absorption fine structure (XAFS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) to understand the structural evolution and chemical nature of each component under reaction conditions. The catalysts were prepared using a reverse microemulsion method that maximized the dispersion of RuOx particles on ceria. A RuOx → Ru transformation was observed upon exposure of the RuOx/CeO2 systems to H2 at 250 °C. For a sample with 5 % molar Ru, two-dimensional clusters (2–4 atoms) of Ru formed on top of the ceria support. An increase in the loading of ruthenium to 20 % molar led to the formation of nanoplates of the metal 2–3 at. layers thick. Both Ru structures were highly dispersed on ceria. They were oxidized after exposure to CO2 at 250 °C. However, under CO2/H2 mixture, they remained in a metallic state as two-dimensional clusters and nanoplates. In situ DRIFTS studies, the 5 % and 20 % Ru/CeO2 catalysts showed distinct reaction intermediates when exposed to CO2 or CO2/H2 (1/4) reaction mixtures. Normalized to the Ru molar percentage, the 5 % Ru/CeO2 system was the most active catalyst exhibiting a selectivity of ∼ 60 % CH4 and 40 % CO at 250 °C. On the other hand, under the same reaction conditions, the 20 % Ru/CeO2 system was less active but had a CH4 selectivity close to 80 %. These results highlight the importance of the structure of the metallic Ru particles as a factor that determines the catalytic performance., The work done at the Chemistry Division of BNL was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, and Catalysis Science Program under contract No. DE-SC0012704. The XAFS studies were performed at the 8-ID beamline of the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-SC0012704. The STEM and EDS studies were carried out at the Electron Microscopy Facility of the Center for Functional Nanomaterials, which is a U.S. Department of Energy Office of Science User Facility, at Brookhaven National Laboratory under Contract No. DE-SC0012704. I.B.-N. and J.D.J. thank Brookhaven National Laboratory for funding through the Goldhaber Distinguished Fellowship program. The authors thank Dr. M.N. Gómez-Cerezo for the help with the synthesis of the materials. M.F.G. and A.K. thanks the MICIU/AEI/10.13039/501100011033 and the EU/PRTR for financial support through projects TED2021–129506B-C21 and PID2022–136883OB-C21., Peer reviewed