Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Digitizing translucent object appearance by validating computed optical properties

  • Tran, D.M.
  • Jensen, M.B.
  • Santafé, Pablo
  • Källberg, S.
  • Ferrero, Alejandro
  • Hannemose, M.R.
  • Frisvad, J.R.
15 pags., 12 figs., 6 tabs., The optical properties available for an object are most often fragmented and insufficient for photorealistic rendering of the object. We propose a procedure for digitizing a translucent object with sufficient information for predictive rendering of its appearance. Based on object material descriptions, we compute optical properties and validate or adjust this object appearance model based on comparison of simulation with spectrophotometric measurements of the bidirectional scattering-surface reflectance distribution function (BSSRDF). To ease this type of comparison, we provide an efficient simulation tool that computes the BSSRDF for a particular light-view configuration. Even with just a few configurations, the localized lighting in BSSRDF measurements is useful for assessing the appropriateness of computed or otherwise acquired optical properties. To validate an object appearance model in a more common lighting environment, we render the appearance of the obtained digital twin and assess the photorealism of our renderings through pixel-by-pixel comparison with photographs of the physical object., European Metrology Programme for Innovation and Research (18SIB03); Agencia Estatal de Investigación (TED2021-129661B-C21); Innovationsfonden (0223-00041B).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterizing linearity of a large area InGaAs photodiode in direct detection mode, at room temperature, from 100 pA to 10 µA

  • Tejedor-Sierra, Néstor
  • Ferrero, Alejandro
  • Campos Acosta, Joaquín
5 pages, 7 figures, 1 table, Nonlinearity characterization of detectors is necessary for performing measurements at different radiant flux levels, as it is the case in bidirectional reflectance distribution function (BRDF) measurements. The differential spectral responsivity (DSR) method is one of the typical procedures for this characterization. In this work, we use attenuation devices to decrease the response of the detector while adding a neutral density filter to record its transmittance, which should be constant at the different signal levels. In this work, we intend to use this method to characterize the linearity of a large area InGaAs photodiode in the near-infrared spectral range, in direct detection mode at room temperature and within a signal range from 100 pA to 10 µA., European Regional Development Fund (PGC2018-096470B-I00, TED2021-129661B-C21); Agencia Estatal de Investigación (PGC2018-096470-B-I00, TED2021-129661B-C21); 10-8 Photocurrent / A 10-6 Ministerio de Ciencia, Innovación y Universidades (PGC2018-096470-B-I00, TED2021-129661B-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nocturnal camouflage through background matching against moonlight

  • Negro, Juan J.
  • Bará, Salvador
  • Galadí-Enríquez, David
  • Nieves, Juan Luis
  • Martínez-Domingo, Miguel A.
  • Ferrero, Alejandro
  • Campos Acosta, Joaquín
  • Bao-Varela, C.
  • Masana, Eduard
  • Camacho, Carlos
11 pages, 6 figures, Camouflage is often considered a daytime phenomenon based on light and shade. Nocturnal camouflage can also occur, but its mechanistic basis remains unclear. Here, we analyze the conditions for background matching (BM) of avian predators against the night sky. Such concealment is achieved when the contrast between the predator and the sky is smaller than the contrast detection threshold of prey. This condition cannot be fulfilled under isotropic skies, as in fully overcast or moonless nights. However, on clear moonlit nights, the isotropy of the sky radiance is broken due to the presence of the Moon, and the conditions for BM can be met for a wide range of sky directions. This effect is mainly dependent on the altitude of the Moon above the horizon, rather than on Moon phase. We have modeled the feasibility of concealment through BM of a typically white barn owl (Tyto alba) when hunting rodents, based on its contrast against the moonlit sky. We considered the radiometric quantities of the sky, the ground, and the bird’s undersides. Our results show that a barn owl with highly reflecting underparts may approach a rodent from broad regions of the moonlit sky while keeping itself below the contrast detection threshold of the mouse M-cones and rods. S-cones, in turn, remain below their excitation threshold for most of the lunar cycle. Our results demonstrate that the white color of barn owls serves as camouflage tailored to the moonlit sky background, providing a mechanistic basis for understanding nocturnal camouflage., C. Camacho, J. Campos, A. Ferrero, E. Masana, and J.L. Nieves received support from MICIU/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR, through contract no. RYC2021-033977-I (to C.C.), and projects PID2023-153097NA-I00 (to C.C.), TED2021-129661B-C21 (to J.C. and A.F.), PDC2021-121059-C21 (to E.M.), and PID2022-139056NB-I00 (to J.L.N.). E. Masana also thanks partial support of “ERDF A way of making Europe” by the EU through grant PID2021-122842OB-C21, and the Institute of Cosmos Sciences, University of Barcelona (ICCUB, Unidad de Excelencia ‘María de Maeztu’) through grant CEX2019-000918-M. C. Bao-Varela (Photonics4life) acknowledges project ED431B 2023/07 of Xunta de Galicia., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Database with measurements of reflectance and transmittance of glazing systems and materials for energy efficiency evaluation in building

  • Álvarez-Pérez, Jorge Omar
  • Santafé, Pablo
  • Ferrero, Alejandro
[Description of methods used for collection/generation of data] The measurements were obtained using a goniophotometer. A Xe lamp was used as the light source. A Köhler system located in the beam path allows for the regulation of both the intensity and the size of the light spot on the sample. The samples were positioned in the required geometries using a robotic arm located at the center of the system. This is ring-shaped and enables two spectroradiometers (VIS and NIR) to rotate around the sample at the necessary collection angles. The incident beam is not obstructed by the spectroradiometers due to the periscopic arrangement of the equipment, which allows for measurements in retroreflection., [Methods for processing the data] Matlab., This database contains data of reflectance and transmittance measurements of glazing systems and materials. The evaluted spectral ranges are [380 nm - 780 nm] and [900 nm -2500 nm]. In the case of transparent glazing samples, the reflectance and transmittance coeffcients are given for different angles of incidence (0º - 70º), whereas for diffuse glazing samples the bidirectional reflectance distribution function (BRDF) and the bidirectional transmitted distribution function (BTDF) are the relevant quantities given in the database., This database is part of the project TED2021-129661B-C21, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRT, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of Angular Dependence of Spectral Reflectance and Transmittance of Glazing Systems for Improving Energy Efficiency in Buildings

  • Santafé, Pablo
  • Álvarez, Jorge
  • Muñoz, Adolfo
  • Barbero-Barrera, María del Mar
  • Campos Acosta, Joaquín
  • Ferrero, Alejandro
16 pages, 13 figures, 1 table, Dynamic simulation has become an essential tool for energy and daylighting simulations in buildings. However, worldwide researchers highlight the discrepancies between simulated and real performance in buildings. An important limitation is that most databases used in simulation softwares only include measurements of diffuse reflectance and transmittance of glazing systems with directional-normal incidence. In this work, a methodology for measuring spectral reflectance and transmittance for different angles of incidence of glazing materials and systems has been developed, and the measurements on a broad set of representative samples, for the spectral range 380 nm - 2500 nm with 5 nm resolution and for angles of incidence from 0º to 70º in steps of 5º, have been made publicly available. In addition, a physics-based model has been proposed and applied to the measurement results, and a principal components analysis has been applied to reduce the amount of data while keeping the relevant information. The results of this work aim to enable more reliable energy simulations to improve the energy efficiency of buildings., This work is part of the project TED2021-129661B-C21, funded by the Spanish Ministry of Science, Innovation and Universities, grant number CIN/AEI/10.13039/501100011033, and the European Union “NextGenerarionEU”/PRTR economic recovery package. In addition, we would like to acknowledge Pedro Mazón (Saint-Gobain) and Igino Rocchio and Arturo Benini (Pilkington) for their support by providing some of the samples used in this study, Peer reviewed