Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manufacturing and Structural Testing of Small Wind Turbine Blades Using Thermoplastic Composites

  • Carnicero, Rafael
  • Cano, Luis
  • Cruz, Ignacio
  • García Manrique, Juan Antonio|||0000-0001-9507-0746
[EN] Thermoplastic composites can be a solution for the circular economy of the wind industry. Some studies have focused on addressing the challenges of reusing raw materials and reducing both the economic costs and environmental damage. Thermoset composites have been crucial in increasing the size of wind turbines (WT), achieving longer and structurally more resistant blades, but they are difficult to recycle at the end of life and sometimes end up in landfills. Thermoplastic composites are being tested as an alternative to thermoset composites because of their similar structural properties and substantial advantages, such as ease of recycling. This article presents the results of the structural properties of a 2-m-long thermoplastic WT blade manufactured with a new thermoplastic resin called Akelite to obtain progress in the implementation of thermoplastic composites in this type of product. The new blade has been compared to an epoxy WT blade built with the same procedure. Property, static, and fatigue tests were performed on these blades to characterize them. The results of this comparison were quite similar, with less than 5% displacement in the static tests and a sensitivity change of less than 2% after the fatigue tests. Future studies should be conducted to extend this study to larger-scale blades., This research was funded by the AEI Agency of the Ministry of Science, Innovation and Universities of the Spanish Government, under Grant No. TED2021-130201B-C33, by NextGenerationEU European Funds, and PID2023-151110OB-I00. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Implementación de nuevos composites basados en resinas termoplásticas fácilmente reciclables en palas de aerogeneradores

  • Carnicero Gómez, Rafael
[ES] Los primeros parques eólicos instalados en España están llegando al final de su vida útil, después de 20-25 años en funcionamiento, y se sabe que entre un 85-90% del peso de un aerogenerador es viable su reciclaje o su reutilización. Uno de los hándicaps que se han detectado es la dificultad de reciclar las palas de los aerogeneradores, debido a su composición de materiales compuestos, principalmente con fibras de vidrio y matrices poliméricas del tipo termoestables. Estas resinas termoestables hacen difícil el reciclaje de los materiales compuestos. Esta tesis doctoral trata de introducir una matriz polimérica del tipo termoplástica llamada Akelite, desarrollada y patentada por ICTP-CSIC, en la fabricación de palas de aerogeneradores, en sustitución de las actuales matrices poliméricas termoestables. Teniendo en cuenta que las propiedades mecánicas de los materiales compuestos fabricados con fibras de vidrio y resina termoestable son similares a los fabricados con resinas termoplásticas, estas últimas gozan de otras cualidades como son su fácil reciclabilidad, unión de composites aplicándoles calor y presión, etc. Durante el trabajo de investigación desarrollado, se ha diseñado una pala de 2 metros de longitud y se ha realizado simulaciones numéricas de su comportamiento mediante el método de elementos finitos para la previsión de las tensiones y deformaciones internas. Después se ha diseñado el molde de la pala, se ha fabricado mediante impresión aditiva 3d y después se ha mecanizado mediante control numérico. Posteriormente se han fabricado una pala con fibra de vidrio y resina epoxi (pala referencia) y otra pala con fibra de vidrio y resina termoplástica (pala estudio) mediante VARI (Vacuum Assited Resin Infusion). Para ello se ha utilizado un sistema de vacío y estufa industrial. A continuación, se han ensayado dichas palas para estudiar su comportamiento, utilizándose equipos de medida de extensometría y vibraciones, mediante ensayos de propiedades, estáticos y fatiga de acuerdo a la norma IEC 61400-23. Finalmente se ha diseñado un proceso de reciclaje de la pala termoplástica, que posteriormente ha sido optimizado para recuperar los principales componentes de la pala (fibra y resina). Tras la realización de todas estas tareas de investigación, se ha conseguido demostrar que el comportamiento mecánico de la pala de referencia (fabricada con resina termoestable comercial) y la pala de estudio (fabricada con resina termoplástica Akelite) es similar y comparable. Además, se ha conseguido desarrollar un proceso de reciclaje de la pala termoplástica y de recuperación de las principales materias primas usadas en la fabricación de la pala eólica, volviendo a fabricar una pala de segunda generación usando las fibras recuperadas durante el reciclaje., [CA] Els primers parcs eòlics instal·lats a Espanya estan arribant al final de la seua vida útil, després de 20-25 anys en funcionament, i se sap que entre un 85-90% del pes d'un aerogenerador és viable el seu reciclatge o la seua reutilització. Un dels hàndicaps que s'han detectat és la dificultat de reciclar les pales dels aerogeneradors, a causa de la seua composició de materials compostos, principalment amb fibres de vidre i matrius polimèriques del tipus termoestables. Estes resines termoestables fan difícil el reciclatge dels materials compostos. Esta tesi doctoral tracta d'introduir una matriu polimèrica del tipus termoplàstica anomenada *Akelite, desenrotllada i patentada per *ICTP-CSIC, en la fabricació de pales d'aerogeneradors, en substitució de les actuals matrius polimèriques termoestables. Tenint en compte que les propietats mecàniques dels materials compostos fabricats amb fibres de vidre i resina termoestable són similars als fabricats amb resines termoplàstiques, estes últimes gaudixen d'altres qualitats com són la seua fàcil reciclabilitat, unió de compòsits aplicant-los calor i pressió, etc. Durant el treball d'investigació desenrotllat, s'ha dissenyat una pala de 2 metres de longitud i s'ha realitzat simulacions numèriques del seu comportament mitjançant el mètode d'elements finits per a la previsió de les tensions i deformacions internes. Després s'ha dissenyat el motle de la pala, s'ha fabricat mitjançant impressió additiva *3d i després s'ha mecanitzat mitjançant control numèric. Posteriorment s'han fabricat una pala amb fibra de vidre i resina epoxi (pala referencia) i una altra pala amb fibra de vidre i resina termoplàstica (pala estudie) mitjançant *VARI (*Vacuum *Assited *Resin *Infusion). Per a això s'ha utilitzat un sistema de buit i estufa industrial. A continuació, s'han assajat estes pales per a estudiar el seu comportament, utilitzant-se equips de mesura de *extensometría i vibracions, mitjançant assajos de propietats, estàtics i fatiga d'acord amb la norma IEC 61400-23. Finalment s'ha dissenyat un procés de reciclatge de la pala termoplàstica, que posteriorment ha sigut optimitzat per a recuperar els principals components de la pala (fibra i resina). Després de la realització de totes estes tasques d'investigació, s'ha aconseguit demostrar que el comportament mecànic de la pala de referència (fabricada amb resina termoestable comercial) i la pala d'estudi (fabricada amb resina termoplàstica *Akelite) és similar i comparable. A més, s'ha aconseguit desenrotllar un procés de reciclatge de la pala termoplàstica i de recuperació de les principals matèries primeres usades en la fabricació de la pala eòlica, tornant a fabricar una pala de segona generació usant les fibres recuperades durant el reciclatge., [EN] The first wind farms installed in Spain are reaching the end of their useful life, after 20-25 years of operation, and it is known that between 85-90% of a wind turbine's weight can be recycled or reused. One of the challenges identified is the difficulty in recycling wind turbine blades, due to their composite materials, primarily composed of glass fibres and thermosetting polymer matrix. These thermosetting resins make recycling composite materials difficult. This doctoral thesis seeks to introduce a thermoplastic polymer matrix called Akelite, developed and patented by ICTP-CSIC, into the manufacture of wind turbine blades, replacing the current thermosetting polymer matrix. Considering that the mechanical properties of composite materials made with glass fibres and thermosetting resin are similar to those made with thermoplastic resins, the latter boast other qualities such as easy recyclability, the ability to bond composites by applying heat and pressure, etc. During the research project, a 2-meter-long blade was designed, and numerical simulations of its behaviour were performed using the finite element method to predict internal stresses and deformations. The blade mould was then designed, manufactured using additive 3D printing, and then machined using numerical control CNC. A blade was subsequently manufactured with fiberglass and epoxy resin (the reference blade) and another blade with fiberglass and thermoplastic resin (the study blade) using VARI (Vacuum-Assisted Resin Infusion). This process involved using an industrial vacuum system and oven. These blades were then tested to study their behaviour using extensometer and vibration measurement equipment, using property, static, and fatigue tests in accordance with the IEC 61400-23 standard. Finally, a thermoplastic blade recycling process was designed and subsequently optimized to recover the blade's main components (fibre and resin). After completing all these research tasks, it was possible to demonstrate that the mechanical behaviour of the reference blade (made with commercial thermosetting resin) and the study blade (made with Akelite thermoplastic resin) are similar and comparable. Furthermore, a process was developed for recycling the thermoplastic blade and recovering the main raw materials used in the manufacture of the wind turbine blade, producing a second-generation blade using the fibres recovered during recycling., Este trabajo es el resultado de la investigación que he realizado en el proyecto SUSTBLADE (TED2021-130201B-C33) y en el proyecto ADDITIVE (PID2023151110OB-I00) desde el año 2023.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manufacturing of a sustainable wind turbine blade with the recovery materials from original blade

  • Carnicero, Rafael
  • Cano, Luis
  • Cruz, Ignacio
  • Martín-Crespo, David
  • López-Manchado, Miguel A.
  • Verdejo, Raquel
  • García Manrique, Juan Antonio|||0000-0001-9507-0746
[EN] While most components of wind turbines (WTs) can be recycled, the blades present a significant challenge. Made from thermoset resin composites, these blades are difficult to recycle at the end of their service life. Although several recycling methods are under development, none allows for the recovery of the resin, and the reclaimed fibres exhibit lower mechanical performance compared to virgin materials. Certain thermoplastic resins offer a more sustainable alternative due to their inherent recyclability, enabling not only the thermoforming of composites but also the recovery of both resin and fibres for reuse in future manufacturing processes. This study demonstrates the manufacturing process of a small wind turbine blade using Akelite, a highperformance liquid acrylic resin with excellent mechanical properties and thermal stability. After undergoing fatigue testing, the blade was successfully recycled, and its constituent materials were reused to manufacture a new WT blade. This process significantly enhances the sustainability of wind energy systems by enabling the full recovery of blade materials at the end of their operational life. Moreover, it aligns with Sustainable Development Goal 12 (SDG-12), by promoting responsible consumption and production, and establishes a circular economy model that could transform blade manufacturing practices across the renewable energy sector., This research was funded by the AEI Agency of the Ministry of Science, Innovation and Universities of the Spanish Government, through SUCCESS BLADE project, grant numbers TED2021-130201B-C31 and TED2021-130201B-C33, by NextGenerationEU European Funds.