Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

SYNPA: SMT Performance Analysis and Allocation of Threads to Cores in ARM Processors

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Simultaneous multithreading processors improve throughput over single-threaded processors thanks to sharing internal core resources among instructions from distinct threads. However, resource sharing introduces inter-thread interference within the core, which has a negative impact on individual application performance and can significantly increase the turnaround time of multi-program workloads. The severity of the interference effects depends on the competing co-runners sharing the core. Thus, it can be mitigated by applying a thread-to-core allocation policy that smartly selects applications to be run in the same core to minimize their interference. This paper presents SYNPA, a simple approach that dynamically allocates threads to cores in an SMT processor based on their run-time dynamic behavior. The approach uses a regression model to select synergistic pairs to mitigate intracore interference. The main novelty of SYNPA is that it uses just three variables collected from the performance counters available in current ARM processors at the dispatch stage. Experimental results show that SYNPA outperforms the default Linux scheduler by around 36%, on average, in terms of turnaround time in 8-application workloads combining frontendbound and backend-bound benchmarks. Index Terms¿Simultaneous Multithreading, Scheduling, HighPerformance Computing, HPC applications, Thread-to-Core allocation, synergistic applications, intra-core interference., This work has been supported by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grant PID2021-123627OB-C51, TED2021-130233B-C32 and Generalitat Valenciana under grant AICO/2021/266. Marta Navarro is supported by Subvenciones para la contratacion de personal investigador predoctoral by CIACIF/2021/413 . Josue Feliu is supported by the RYC2021-030862-I contract, funded by the MCIN/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Dynamic Allocation of Processor Cores to Graph Applications on Commodity Servers

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Jones, Timothy M.
[EN] Graph processing is increasingly adopted to solve problems that span many application domains, including scientific computing, social networks, and big-data analytics. These applications present particular features (huge working sets and irregular scalability) that make the default Linux scheduler, which adopts a time-sharing policy to provide a fair scheduler, perform poorly when co-locating multiple graph applications in the same processor. This work focuses on maximizing processor utilization, which is a major concern of current data centers. To this end, we propose AFAIR, a flexible scheduling policy that allocates multiple graph applications on the same processor and assigns a fraction of the cores exclusively to each application instead of sharing them. Moreover, AFAIR dynamically adds/removes cores to the running applications, adapting the number of threads used for parallel execution to balance memory load. This allows AFAIR to achieve almost perfect fairness, on average 95%., This work has been supported by the Spanish Ministerio de Universidades under the grant FPU18/01948 and by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grants PID2021-123627OB-C51 and TED2021- 130233B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Mejora del Benchmarking de aplicaciones de latencia crítica para una evaluación más realista

  • Li, Zhilin
  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Pons Terol, Julio|||0000-0002-5654-6753
[ES] Los sistemas en la nube han crecido rápidamente, trasladando tareas computacionales desde los dispositivos usuarios a los servidores de la nube donde los clientes envían sus peticiones. Las aplicaciones de latencia crítica, influenciadas por los tiempos de respuesta más elevados (percentil 95+) de las peticiones, han cobrado especial interés, pero su gran diversidad dificulta una evaluación precisa. Este trabajo compara distintas suites de prueba y concluye que TailBench es la más adecuada para evaluar estas aplicaciones, ya que ofrece una amplia diversidad de comportamientos e implementa una interfaz común que facilita la evaluación experimental. Sin embargo, presenta limitaciones para escenarios multi-servidor. Para abordar este problema, en este trabajo se propone TailBench++, una versión mejorada de Tailbench que permite configurar de forma flexible el número de clientes y servidores, así como la carga de trabajo. Estas mejoras facilitan la evaluación de entornos más realistas con múltiples servidores que sirven peticiones de clientes que varían su comportamiento de forma dinámica, ampliando el alcance de los estu- dios en la nube., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovacion junto al FEDER europeo a traves de los proyectos PID2021-123627OB-C51 y TED2021-130233B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Characterizing Power and Performance Interference Scalability in the 28-core ARM ThunderX2

  • Calero, Ibai
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Nowadays, energy efficiency is a major concern in any type of processor-based device, ranging from processor servers to supercomputers, including mobile battery-fed devices. In recent years, systems based on the ARM architecture, traditionally better suited for mobile and embedded systems, have increased their market share in segments commonly occupied by x86 processors. This growth is due, to some extent, to the excellent energy efficiency shown by high-performance ARM processors. Designing software and hardware energy-efficient systems requires a sound knowledge of the relationship among three main axes: component activity, power, and inter-application interference at the shared resources. This problem aggravates in many-core processors, which are ubiquitous in high-performance servers. This paper characterizes the aforementioned axes in a 28-core ARM ThunderX2 processor. Experimental results show that the performance of highly-scalable single-threaded applications is sustained regardless of the number of applications and interference introduced at the shared resources at the cost of increasing power. In contrast, low-scalable applications require much less power and experience a huge performance degradation as their number increases., This work has been partially supported by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under ¿ grants PID2021-123627OB-C51 and TED2021-130233B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Thread-to-Core Allocation in ARM Processors Buildings Synergistic Pairs

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Simultaneous multithreading (SMT) processors can present significant throughput improvements over singlethreaded (ST) processors thanks to sharing internal core resources among instructions executing from multiple threads. However, resource sharing introduces inter-thread interference within the core, which negatively impacts individual application performance and can significantly increase the turnaround time of multi-program workloads. The severity of the intra-core interference on performance depends on the applications corunning in the same core. A thread scheduler can help reduce this effect by smartly selecting the pairs of applications that should run on each SMT core. This paper presents SYNPA, a simple approach that dynamically allocates threads to SMT cores based on their run-time dynamic behavior. SYNPA uses a regression model to select synergistic pairs to mitigate intra-core interference. Results show that SYNPA outperforms the default Linux scheduler by around 35%, on average, in terms of turnaround time when running 8- application workloads combining frontend-bound and backendbound applications., This work has been supported by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grant PID2021-123627OB-C51, TED2021-130233B-C32, and Generalitat Valenciana under grant AICO/2021/266. Marta Navarro is supported by Subvenciones para la contratacion de personal investigador predoctoral by CIACIF/2021/413 . Josue Feliu is supported by the RYC2021-030862-I contract, funded by the MCIN/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SMT Efficiency in Supervised ML Methods: a Throughput and Interference Analysis

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] The microarchitecture of general-purpose processors is continuously evolving to adapt to the new computation and memory demands of incoming workloads. In this regard, new circuitry is added to execute specific instructions like vector multiplication or string operations. These enhancements and the support of multiple threads per core make simultaneous multithreading (SMT) processors dominate the market for data center processors. Regarding emerging workloads, machine learning is taking an important role in many research domains like biomedicine, economics, and social sciences. This paper analyzes the efficiency of machine learning workloads running in SMT mode (two threads per core) versus running them in ST mode (single-threaded) with twice the number of cores. Experimental results in an Intel Xeon Skylake-X processor show an SMT efficiency falling between 80% and 100% across the studied workloads. These results prove two main findings: i) last-generation SMT processors are excellent candidates to execute ML workloads as they achieve a high SMT efficiency, and ii) if the performance of two major resources (i.e., FP double operator and core's caches) was boosted, all the workloads would achieve an almost perfect SMT efficiency. Moreover, results show that there is still room to support more threads without adding extra hardware. The discussed findings are aimed at providing insights to design future processors for ML workloads., This work has been supported by the Spanish Ministerio de Ciencia e Innovación and European ERDF under grants PID2021 123627OB-C51 and TED2021 130233B-C32. Marta Navarro is supported by Subvenciones para la contratación de personal investigador predoctoral by CIACIF/2021/413.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Extensión de un simulador de redes de interconexión y modelado de políticas de mapeo en redes Dragonfly

  • Baviera-Guaita, Alejandro
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] La red de interconexion es uno de los componentes mas cr¿ticos de los supercomputadores. La eleccion de la topolog¿a es cr¿tica para cubrir las necesidades de prestaciones y consumo de estos sistemas. Se suelen utilizan topolog¿as novedosas con conmutadores de alto grado como la Dragonfly. No obstante, esta topolog¿a no esta exenta de problemas de contencion en la red entre aplicaciones que comparten el sistema, as¿ como entre los mensajes de la misma aplicacion. Los trabajos que se ejecutan concurrentemente se ven obligados a compartir recursos generando interferencias entre ellos en las comunicaciones a traves de la red. La interferencia sufrida por las aplicaciones paralelas es altamente dependiente de las pol¿ticas de mapeo de aplicaciones a nodos de procesamiento en el sistema y de la configuracion de la topolog¿a utilizada. Por ello en este art¿culo analizamos en la topolog¿as Dragonfly la interferencia sufrida por aplicaciones reales del dominio HPC considerando varias estrategias de mapeo de estas aplicaciones en los nodos de procesamiento y varias configuraciones de la topolog¿a Dragonfly. Ademas, este art¿¿culo presenta las extensiones realizadas al simulador Sauron para poder realizar un analisis exhaustivo de interferencia en la red de interconexion de altas prestaciones en aplicaciones paralelas., Este trabajo ha sido parcialmente financiado por por el Ministerio de Ciencia e Innovacion junto al FEDER europeo a traves de los proyectos PID2021- 123627OB-C51 and TED2021-130233B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Main memory controller with multiple media technologies for big data workloads

  • Avargues, Miguel A.
  • Lurbe-Sempere, Manel
  • Yang, Rui
  • Zhu, Xiaoping
  • Wang, Guanhao
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] SRAM and DRAM memory technologies have been dominant in the implementations of memory subsystems. In recent years, and mainly driven by the huge memory demands of big data applications, NVRAM technology has emerged as a denser memory technology, enabling the design of new hybrid DRAM/NVRAM memory hierarchies that combine multiple memory media technologies to balance memory capacity, latency, cost, and endurance. Two main approaches are being applied to the design of hybrid memory hierarchies: the hybrid address space approach, which relies on the programmer or the operating system to choose the memory technology where each memory page should be stored; and the (only) NVM address space approach, where a faster technology (e.g. commodity DRAM) is needed to acts as a cache of NVRAM to boost the performance. This approach presents architectural challenges such the organization of metadata (e.g. cache tags) and the selection of the proper technology for each memory component. In contrast to existing approaches, this work proposes a memory controller that leverages novel memory technologies such as eDRAM and MRAM to mitigate NVRAM bus contention and improve the performance of the NVM address space. The devised solution proposes a two-level cache hierarchy in the memory controller: a SRAM sector cache and a (x)RAM cache. The (x)RAM cache, much denser, helps significantly reduce the number of accesses to NVRAM. Experimental results show that implementing the (x)RAM cache with eDRAM or MRAM is the best performing approach. Moreover, the eRAM is able to improve the SRAM cache miss penalty by up to 50% and 80%, and overall system performance by 15% and 23%., This work has been partially supported by Huawei under Agreement No: TC20210705020, by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grants PID2021-123627OB-C51 and TED2021-130233B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advanced resource management: A hands-on master course in HPC and cloud computing

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Resource management has become a major concern in dealing with performance and fairness in recent computing servers, including a wide variety of shared resources. To achieve high-performing and efficient systems, both hardware and software engineers must be thoroughly trained in effective resource management techniques. This paper introduces the GRE master course (Spanish acronym for Resource Management and Performance Evaluation in Cloud and High-Performance Workloads), which is being offered since Fall 2023. The course is taught by instructors with broad research expertise in resource management and performance evaluation. Subjects covered in this course include workload characterization, state-of-the-art resource management approaches, and performance evaluation tools and methodologies used in production systems. Management techniques are studied both in the context of HPC and cloud computing, where resource efficiency is becoming a primary concern. To enhance the learning experience, the course integrates theoretical concepts with a wide set of hands-on tasks carried out on recent real platforms. A real cloud virtualized environment is mimicked using typical software deployed in production systems such as Proxmox Virtual Environment. Students learn to use tools such as Linux Perf and Intel Vtune Profiler, which are commonly employed by researchers and practitioners to carry out typical tasks like performance bottleneck analysis from a microarchitectural perspective. Overall, the GRE course provides students with a solid foundation and skills in resource management by addressing current hot topics both in the industry and academia. Student satisfaction and learning outcomes prove the success of the GRE course and encourage us to continue in this direction., This work has been supported by the Spanish Ministerio de Ciencia e Innovación and European ERDF under grants PID2021-123627OB-C51 and TED2021-130233B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Del mundo real al aula: Integrando la gestión de recursos de sistemas reales en la docencia de arquitectura del computador

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] La gestión de recursos es fundamental para optimizar las prestaciones y la equidad en los servidores actuales. Para desarrollar sistemas eficientes, es esencial una formación sólida en técnicas avanzadas de gestión de recursos. Sin embargo, las asignaturas avanzadas sobre arquitectura de computadores suelen concentrarse en los aspectos teóricos o prácticas relativamente sencillas, la mayoría basadas en simuladores, y omitir estos conceptos. Este artículo presenta la asignatura de máster "Gestión de Recursos en Sistemas Cloud y Evaluación de Prestaciones" (GRE) que aborda la arquitectura de computadores con un enfoque práctico, centrándose en la evaluación de prestaciones y la gestión de recursos de las máquinas comerciales. Los contenidos abarcan tanto sistemas de alto rendimiento (HPC) como sistemas cloud, donde una gestión ineficiente puede comprometer los acuerdos de nivel de servicio (SLA). Un aspecto fundamental es dotar a los alumnos de habilidades prácticas, por lo que se han diseñado prácticas en sistemas reales y empleando herramientas populares tanto en la industria como en la investigación. Esto asegura una formación aplicada y relevante, respaldada por altos niveles de satisfacción estudiantil., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovacion junto al FEDER europeo a traves de los proyectos PID2021-123627OB-C51 y TED2021-130233B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

No Rush in Executing Atomic Instructions

  • Asgharzadeh, Ashkan
  • Acacio, Manuel E.
  • Kaxiras, Stefanos
  • Ros, Alberto
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
[EN] Hardware atomic instructions are the building blocks of the synchronization algorithms. Historically, to guarantee atomicity and consistency, they were implemented using memory fences, committing older memory instructions, and draining the store buffer before initiating the execution of atomics. Unfortunately, the use of such memory fences entails huge performance penalties as it implies execution serialization, thus impeding instruction- and memory-level parallelism. The situation, however, seems to have changed recently. Through experiments on x86 machines, we discovered that current x86 processors manage to comply with the x86-TSO requirements while avoiding the performance overhead introduced by fences (fence-free or unfenced implementation). This paves the way to new potential optimizations to atomic instruction execution. In particular, our simulation experiments modeling unfenced atomics reveal that executing atomic instructions as soon as their operands are ready does not always lead to optimal performance. In fact, this increases the time that other threads should wait to obtain the cacheline. In contended scenarios, delaying the execution of the atomic instruction to minimize the time the cacheline is locked provides superior performance. Based on this observation, we present Rush or Wait (RoW), a hardware mechanism to decide when to execute an atomic instruction. The mechanism is based on a contention predictor that estimates if an atomic will access a contended cacheline. Non-contended atomics execute once their operands are ready. Contended atomics, on the contrary, wait to become the oldest memory instruction and to drain the store buffer to execute, minimizing the contention on the accessed cacheline. Our experimental evaluation shows that RoW reduces execution time on average by 9.2% (and up to 43%) compared to a baseline that executes atomics as soon as the operands are ready, and yet it requires a small area overhead (64 bytes)., This project has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (grant agreement No 819134), from the MCIN/AEI/10.13039/501100011033/ and the ERDF A way of making Europe , EU (grants PID2021-123627OB-C51 and PID2022-136315OB-I00), from the MCIN/AEI/10.13039/501100011033/ and the European Union NextGenerationEU/PRTR (grants RYC2021-030862-I and TED2021-130233B-C33), from the Swedish Research Council (VR grant 2022-04959), and from the Swedish Foundation for Strategic Research (SSF grant FUS21-0067).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Caracterización de prestaciones, interferencias y análisis de consumo energético en un procesador ARM Thunder X2

  • Calero, Ibai
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] En la actualidad, la eficiencia energética es de gran importancia en todo tipo de dispositivos, desde servidores hasta supercomputadores, pasando por ordenadores de escritorio. En este contexto, en los últimos años, los sistemas basados en la arquitectura ARM, tradicionalmente relegados a sistemas móviles y empotrados, han ganado una mayor cuota de mercado en nichos copados por procesadores basados en la arquitectura x86. Esta irrupción se debe a que los procesadores ARM de altas prestaciones ofrecen una mayor eficiencia energética que la competencia. El presente trabajo persigue caracterizar comportamientos t¿¿picos de las aplicaciones y analizar las correlaciones entre diversas métricas de prestaciones y consumo energético para servir de ayuda en el diseño de nuevas propuestas de planificación centradas en procesadores ARM. La principal conclusión del análisis de los resultados indica que las aplicaciones que sufren un menor slowdown, como consecuencia de la contención por los recursos compartidos del procesador, son también las que alcanzan una mayor eficiencia energética., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovaci¿on junto al FEDER europeo a traves de los proyectos TED2021-130233B-C32 y PID2021-123627OB-C51.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis de Interferencias en la Red de Interconexión entre Aplicaciones Exascale

  • Baviera-Guaita, Alejandro
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Kaidanov, Max
  • Duro, José
[ES] En los supercomputadores exascala, la red de interconexion se convierte en uno de los componentes mas criticos. Las topologias tradicionales no satisfacen las necesidades de prestaciones y consumo de estos sistemas y por ello se utilizan topolog¿as mas novedosas con conmutadores de alto grado como la Dragonfly. Sin embargo, esta topologia tambien presenta sus problemas de aislamiento de los trabajos que comparten el sistema. Los trabajos independientes que se ejecutan concurrentemente se ven obligados a compartir recursos generando interferencias entre ellos en las comunicaciones a traves de la red. Esta interferencia se magnifica aun mas por el hecho de que las redes Dragonfly funcionan mejor bajo trafico aleatorio, lo que pone de manifiesto la importancia del analisis junto a la interferencia de las politicas de mapeo de aplicaciones a nodos de procesamiento en el sistema. En este articulo analizamos en la topolog¿a Dragonfly y en el contexto de la arquitectura de red BXI la interferencia sufrida por aplicaciones reales del dominio HPC considerando varias estrategias de mapeo de estas aplicaciones en los nodos de procesamiento. Para ello analizamos dos escenarios, un escenario en el que una aplicacion de las seleccionadas en el proyecto europeo RED-SEA se ejecuta junto a trafico sintetico de distinta intensidad y un segundo escenario donde dos aplicaciones reales de las de referencia del proyecto se ejecutan simultaneamente en la maquina. Los resultados muestran que la politica de mapeo tiene mucha influencia en el tiempo de ejecucion de la aplicacion y en la interferencia ejercida entre aplicaciones., El presente trabajo ha sido financiado por la Comision Europea (programa Horizon 2020, call H2020- JTI-EuroHPC-2019-1 - grant agreement ID: 955776) y Ministerio de Ciencia e Innovacion de España y Fondos Europeos ERDF (proyectos PCI2021-121934, PCI2021-121976, TED2021-130233B-C32, PID2021- 123627OB-C51.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

CELLO: Compiler-Assisted Efficient Load-Load Ordering in Data-Race-Free Regions

  • Singh, Sawan
  • Acacio, Manuel E.
  • Jimborean, Alexandra
  • Ros, Alberto
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
[EN] Efficient Total Store Order (TSO) implementations allow loads to execute speculatively out-of-order. To detect order violations, the load queue (LQ) holds all the in-flight loads and is searched on every invalidation and cache eviction. Moreover, in a simultaneous multithreading processor (SMT), stores also search the LQ when writing to cache. LQ searches entail considerable energy consumption. Furthermore, the processor stalls upon encountering the LQ full or when its ports are busy. Hence, the LQ is a critical structure in terms of both energy and performance. In this work, we observe that the use of the LQ could be dramatically optimized under the guarantees of the datarace-free (DRF) property imposed by modern programming languages. To leverage this observation, we propose CELLO, a software-hardware co-design in which the compiler detects memory operations in DRF regions and the hardware optimizes their execution by safely skipping LQ searches without violating the TSO consistency model. Furthermore, CELLO allows removing DRF loads from the LQ earlier, as they do not need to be searched to detect consistency violations. With minimal hardware overhead, we show that an 8-core 2-way SMT processor with CELLO avoids almost all conservative searches to the LQ and significantly reduces its occupancy. CELLO allows i) to reduce the LQ energy expenditure by 33% on average (up to 53%) while performing 2.8% better on average (up to 18.6%) than the baseline system, and ii) to shrink the LQ size from 192 to only 80 entries, reducing the LQ energy expenditure as much as 69% while performing on par with a mainstream LQ implementation., This project has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation program (grant agreement No 819134), from the MCIN/AEI/10.13039/501100011033/ and the ERDF A way of making Europe , EU (grant PID2022- 136315OB-I00), from the European Union s Horizon 2021 research and innovation program (grant agreement No 101070374 under HORIZON-CL4-2021-DIGITALEMERGING-01) and RYC2018-025200-I, and from the MCIN/AEI/10.13039/501100011033/ and the European Union NextGenerationEU/PRTR (grants TED2021-130233BC33/C32 and RYC2021-030862-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual Fast-Track Cache: Organizing Ring-Shaped Racetracks to Work as L1 Caches

  • Valero, Alejandro
  • Lorente Garcés, Vicente Jesús
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Static Random-Access Memory (SRAM) is the fastest memory technology and has been the common design choice for implementing first-level (L1) caches in the processor pipeline, where speed is a key design issue that must be fulfilled. On the contrary, this technology offers much lower density compared to other technologies like Dynamic RAM, limiting L1 cache sizes of modern processors to a few tens of KB. This paper explores the use of slower but denser Domain Wall Memory (DWM) technology for L1 caches. This technology provides slow access times since it arranges multiple bits sequentially in a magnetic racetrack. To access these bits, they need to be shifted in order to place them under a header. A 1-bit shift usually takes one processor cycle, which can significantly hurt the application performance, making this working behavior inappropriate for L1 caches. Based on the locality (temporal and spatial) principles exploited by caches, this work proposes the Dual Fast-Track Cache (Dual FTC) design, a new approach to organizing a set of racetracks to build set-associative caches. Compared to a conventional SRAM cache, Dual FTC enhances storage capacity by 5x while incurring minimal shifting overhead, thereby rendering it a practical and appealing solution for L1 cache implementations. Experimental results show that the devised cache organization is as fast as an SRAM cache for 78% and 86% of the L1 data cache hits and L1 instruction cache hits, respectively (i.e., no shift is required). Consequently, due to the larger L1 cache capacities, significant system performance gains (by 22% on average) are obtained under the same silicon area., This work was supported in part by Agencia Estatal de Investigacion (AEI) under Grant PID2022-136454NB-C22/AEI/10.13039/501100011033; in part by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under Grant PID2021-123627OB-C51 and Grant TED2021-130233B-C32; in part by European Union-NextGenerationE under Grant PDC2023-145851-00/MCIN/AEI/10.13039/501100011033; and in part by the Department of Science, University, and Knowledge Society, Government of Aragon under Grant gaZ: T58_23R research group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Power, energy, and performance analysis of single-and multi-threaded applications in the ARM ThunderX2

  • Calero, Ibai
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Energy efficiency has been a major concern in data centers, and the problem is exacerbated as its size continues to rise. However, the lack of tools to measure and handle this energy at a fine granularity (e.g., processor core or last-level cache) has translated into slow research advances in this topic. Understanding where (i.e., which components) and when (the point in time) energy consumption translates into minor performance improvements is of paramount importance to design any energy-aware scheduler. This paper characterizes the relationship between energy consumption and performance in a 28-core ARM ThunderX2 processor for both single-threaded and multi-threaded applications. This paper shows that single-threaded applications with high CPU activity maintain their performance in spite of the inter-application interference at shared resources, but this comes at the expense of higher power consumption. Conversely, applications that heavily utilize the L3 cache and memory consume less power but suffer significant performance degradation as interference levels rise. In contrast, multi-threaded applications show two distinct behaviors. On the one hand, some of them experience significant performance gains when they execute in a higher number of cores with more threads, which outweighs the increase in power consumption, leading to high energy efficiency., This work has been partially supported by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grants PID2021-123627OB-C51 and TED2021-130233B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A modular approach to build a hardware testbed for cloud resource management research

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Research on resource management focuses on optimizing system performance and energy efficiency by distributing shared resources like processor cores, caches, and main memory among competing applications. This research spans a wide range of applications, including those from high-performance computing, machine learning, and mobile computing. Existing research frameworks often simplify research by concentrating on specific characteristics, such as the architecture of the computing nodes, resource monitoring, and representative workloads. For instance, this is typically the case with cloud systems, which introduce additional complexity regarding hardware and software requirements. To avoid this complexity during research, experimental frameworks are being developed. Nevertheless, proposed frameworks often fail regarding the types of nodes included, virtualization support, and management of critical shared resources. This paper presents Stratus, an experimental framework that overcomes these limitations. Stratus includes different types of nodes, a comprehensive virtualization stack, and the ability to partition the major shared resources of the system. Even though Stratus was originally conceived to perform cloud research, its modular design allows Stratus to be extended, broadening its research use on different computing domains and platforms, matching the complexity of modern cloud environments, as shown in the case studies presented in this paper., This work has been supported by the Spanish Ministerio de Universidades under the grant FPU18/01948 and by the Spanish Ministerio de Ciencia e Innovación and European ERDF under grants PID2021-123627OB-C51 and TED2021-130233B-C32, and by Generalitat Valenciana under Grant AICO/2021/266.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

WAPA: A Workload-Agnostic CPI-Based Thread-to-Core Allocation Policy

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Pallardó-Julià, Vicent
[EN] Simultaneous multithreading (SMT) processors improve system throughput by sharing core resources among the threads running on the same core. However, intra-core interference can cause co-running applications to degrade each other¿s performance significantly. To address this issue, some approaches have focused on balancing contention at the core shared resources (e.g. the shared L1 data cache). A key advantage of these approaches is that they are workload-agnostic. Other approaches improve the previous ones by modeling the inter-application interference across the intra-core shared resources. Unfortunately, these approaches require off-line model training for specific workloads. This paper presents WAPA, a CPI-based thread-to-core allocation approach that incorporates the best of both worlds. WAPA is a workloadagnostic policy that implicitly accounts for inter-thread interference across all the shared resources by leveraging the CPI. The proposed approach relies on the optimal transport (OT) theory, a mathematical theory to dynamically select symbiotic pairs of applications. Experimental results in an Intel Xeon show that WAPA outperforms the default Linux scheduler on average by 8.4% in IPC in workloads dominated by cache and main memory latencies, while performance gains of existing approaches are below 3.2%., This work has been partially supported by the Spanish Ministerio de Ciencia e Innovación and European ERDF under grants PID2021-123627OB-C51 and TED2021-130233B-C32. Marta Navarro is supported by Subvenciones para la contratación de personal investigador predoctoral by CIACIF/2021/413.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Diseño de un controlador de memoria principal híbrido para aplicaciones de Big Data

  • Lurbe, Manel
  • Avargues, Miguel A.
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] La tecnologia de memoria DRAM ha sido la dominante en las implementaciones del subsistema de memoria. En los ultimos años, e impulsada principalmente por las enormes demandas de memoria de las aplicaciones de big data, la tecnologia NVRAM ha emergido como una tecnologia de memoria m¿as densa, permitiendo el diseño de nuevas jerarquias de memoria hibridas DRAM/NVRAM que combinan multiples tecnologias de memoria para equilibrar capacidad, latencia, coste y persistencia. En el diseño de jerarquias de memoria hibridas se est¿an aplicando dos enfoques principales: el enfoque de espacio de direcciones hibrido DRAM/NVRAM, que confia en el programador o el sistema operativo para elegir la tecnologia de memoria en la que debe almacenarse cada pagina de memoria; y el enfoque de espacio de direcciones (unico) NVRAM, en el que se necesita una tecnologia mas rapida (por ej., DRAM convencional) que actue como cache de la NVRAM para aumentar las prestaciones. Este enfoque presenta retos arquitectonicos como la organizacion de metadatos. En contraste con los enfoques existentes, este trabajo propone un controlador de memoria que aprovecha tecnologias de memoria recientes como eDRAM y MRAM para mejorar las prestaciones de la lenta memoria NVRAM cuando actua como memoria principal. La propuesta consiste en una jerarquia de cache de dos niveles en el controlador de memoria: una cache de sectores SRAM y una cache (x)RAM. La cache (x)RAM, mucho mas densa, ayuda a reducir significativamente el numero de accesos a la NVRAM. Los resultados experimentales demuestran que la implementaci¿on de la cache (x)RAM con eDRAM o MRAM es el metodo mas eficaz. Ademas, la eDRAM es capaz de mejorar la penalizacion en caso de fallo de la cache SRAM hasta en un 50 % y un 80 %, y las prestaciones globales del sistema en un 15 % y un 23 %., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovacion español y el FEDER europeo mediante las subvenciones PID2021-123627OBC51 y TED2021-130233B-C32. Manel Lurbe cuenta con el apoyo de Ayudas para Contratos predoctorales UPV - subprograma 1 (PAID-01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Rebasing Microarchitectural Research with Industry Traces

  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Perais, Arthur
  • Jiménez, Daniel A.
  • Ros, Alberto
[EN] Microarchitecture research relies on performance models with various degrees of accuracy and speed. In the past few years, one such model, ChampSim, has started to gain significant traction by coupling ease of use with a reasonable level of detail and simulation speed. At the same time, datacenter class workloads, which are not trivial to set up and benchmark, have become easier to study via the release of hundreds of industry traces following the first Championship Value Prediction (CVP-1) in 2018. A tool was quickly created to port the CVP-1 traces to the ChampSim format, which, as a result, have been used in many recent works. In this paper, we revisit this conversion tool and find that several key aspects of the CVP-1 traces are not preserved by the conversion. We therefore propose an improved converter that addresses most conversion issues as well as patches known limitations of the CVP-1 traces themselves. We evaluate the impact of our changes on two commits of ChampSim, with one used for the first Instruction Championship Prefetching (IPC-1) in 2020. We find that the performance variation stemming from higher accuracy conversion is significant., This project has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (grant agreement No 819134), from the MCIN/AEI/10.13039/501100011033/ and the ERDF A way of making Europe , EU (grants PID2021-123627OB-C51 and PID2022-136315OB-I00) and the European Union NextGenerationEU/PRTR (grants RYC2021- 030862-I and TED2021-130233B-C33/C32), from the National Science Foundation (grants CNS-1938064 and CCF-1912617), as well as generous gifts from Intel. Portions of this research were conducted with the advanced computing resources provided by Texas A&M High Performance Research Computing.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Optimizing Prefetch with Machine Learning and Analyzing its Impact on the Performance of Deep Memories Hierarchies

  • Lurbe Sempere, Manel
[ES] La creciente presión sobre los recursos compartidos de la jerarquía de memoria en los sistemas de cómputo modernos se ha convertido en un factor crítico que limita el rendimiento. La proliferación de aplicaciones concurrentes, impulsada por cargas de trabajo de aprendizaje automático y entornos virtualizados en la nube, ha transformado la concepción tradicional de las jerarquías de memoria y acentuado la necesidad de ampliar la capacidad de la memoria principal. Sin embargo, la memoria DRAM convencional enfrenta restricciones físicas y tecnológicas que comprometen su escalabilidad, lo que ha impulsado la incorporación de memorias no volátiles (NVRAM) como alternativa emergente. A pesar de sus ventajas en densidad, la mayor latencia de acceso de la NVRAM plantea nuevos desafíos que requieren rediseñar y optimizar los mecanismos de gestión de memoria. En este contexto, los mecanismos de prefetching resultan fundamentales para mitigar las penalizaciones de latencia y aprovechar plenamente las nuevas tecnologías de memoria. No obstante, la configuración de prefetchers en arquitecturas multinivel plantea tensiones significativas, dado que su carácter especulativo incrementa el consumo de ancho de banda y puede deteriorar el rendimiento en sistemas con alta concurrencia. Así, la selección adecuada de configuraciones de prefetching requiere un equilibrio entre las características de acceso de las aplicaciones y la eficiencia en el uso del ancho de banda compartido. De manera complementaria, la integración de memorias NVRAM en la jerarquía introduce profundos cambios estructurales. La menor velocidad de estas memorias en comparación con la DRAM exige el diseño de nuevas organizaciones de caché y controladores de memoria capaces de mitigar sus limitaciones de latencia y preservar el rendimiento de los procesadores de altas prestaciones. Esta tesis aborda de forma conjunta dos problemáticas clave en la evolución de las jerarquías de memoria: (i) la selección óptima de configuraciones de prefetching en cargas de trabajo multiprogramadas mediante técnicas basadas en redes neuronales, y (ii) el diseño de jerarquías profundas con NVRAM orientadas a aumentar la capacidad de memoria principal sin comprometer el rendimiento., [EN] The increasing pressure on shared resources within the memory hierarchy of modern computing systems has become a critical performance-limiting factor. The proliferation of concurrent applications, driven by machine learning workloads and cloud-based virtualized environments, has reshaped the traditional conception of memory hierarchies and highlighted the need to expand main memory capacity. However, conventional DRAM faces physical and technological constraints that hinder its scalability, fostering the integration of non-volatile memories (NVRAM) as an emerging alternative. Despite their advantages in density, NVRAM technologies introduce higher access latency, which demands new strategies for memory management and optimization. In this context, prefetching mechanisms play a fundamental role in mitigating latency penalties and fully exploiting the potential of emerging memory technologies. Nevertheless, the configuration of prefetchers in multilevel architectures poses significant challenges, as their speculative nature increases bandwidth consumption and can degrade performance in highly concurrent systems. Therefore, the optimal selection of prefetching configurations requires balancing application-specific access patterns with efficient shared bandwidth utilization. Complementarily, the integration of NVRAM into the hierarchy introduces profound structural changes. The slower speed of these memories compared to DRAM necessitates the design of new cache organizations and memory controllers to mitigate latency limitations and sustain high-performance processor efficiency. This dissertation %jointly addresses two key challenges in the evolution of memory hierarchies: (i) the optimal selection of prefetching configurations in multiprogrammed workloads through neural network-based techniques, and (ii) the design of deep NVRAM hierarchies aimed at increasing main memory capacity without compromising system performance., [CA] La creixent pressió sobre els recursos compartits dins de la jerarquia de memòria dels sistemes de computació moderns s'ha convertit en un factor crític que limita el rendiment. La proliferació d'aplicacions concurrents, impulsada per les càrregues de treball d'aprenentatge automàtic i els entorns virtualitzats al núvol, ha transformat la concepció tradicional de les jerarquies de memòria i ha posat de manifest la necessitat d'ampliar la capacitat de la memòria principal. No obstant això, la DRAM convencional afronta restriccions físiques i tecnològiques que en dificulten l'escalabilitat, fet que ha propiciat la incorporació de memòries no volàtils (NVRAM) com a alternativa emergent. Tot i els seus avantatges en densitat, les NVRAM introdueixen una latència d'accés superior, la qual cosa exigeix noves estratègies de gestió i optimització de la memòria. En aquest context, els mecanismes de prefetching són fonamentals per a mitigar les penalitzacions de latència i aprofitar plenament el potencial de les noves tecnologies de memòria. Tanmateix, la configuració dels prefetchers en arquitectures multinivell planteja reptes importants, atés que el seu caràcter especulatiu incrementa el consum d'ample de banda i pot degradar el rendiment en sistemes amb alta concurrència. Per tant, la selecció òptima de configuracions de prefetching requereix equilibrar els patrons d'accés específics de les aplicacions amb una utilització eficient dels recursos compartits. De manera complementària, la integració de NVRAM en la jerarquia introdueix canvis estructurals profunds. La menor velocitat d'aquestes memòries en comparació amb la DRAM obliga a dissenyar noves organitzacions de memòria cau i nous controladors de memòria capaços de mitigar les seues limitacions de latència i mantindre l'eficiència dels processadors d'altes prestacions. Aquesta tesi aborda conjuntament dos reptes clau en l'evolució de les jerarquies de memòria: (i) la selecció òptima de configuracions de prefetching en càrregues de treball multiprogramades mitjançant tècniques basades en xarxes neuronals, i (ii) el disseny de jerarquies profundes amb NVRAM orientades a augmentar la capacitat de la memòria principal sense comprometre el rendiment del sistema., This work has been supported by the Spanish Ministerio de Ciencia e Innovación and European ERDF under grants PID2021-123627OB-C51, PID2024-158682OB-C31, by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR under grant TED2021-130233B-C32, and Generalitat Valenciana under grant CIPROM/2024/007. Manel Lurbe is supported by Ayudas Contratos predoctorales UPV-subprograma 1 (PAID-01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

PANES(Parejas afiNES): Estrategia de mejora de prestaciones en procesadores SMT de ARM

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] Este artículo presenta PANES, una estrategia sencilla que asigna dinámicamente hilos a núcleos de un procesador SMT en función de su comportamiento dinámico en tiempo de ejecución., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovaci¿on junto al FEDER europeo a trav¿es de los proyectos PID2021-123627OBC51, TED2021-130233B-C3 y AICO/2021/266. Marta Navarro tiene la beca Subvenciones para la contrataci¿on de personal investigador predoctoral de la Generalitat Valenciana (ACIF2022). Josu¿e Feliu cuenta con el apoyo del contrato RYC2021-030862-I financiado por MCIN/AEI /10.13039/501100011033 y por la Uni¿on Europea NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modelado de una Arquitectura de Monitorización de Prestaciones con el Simulador Gem5

  • Pecino-Fernández, Manuel Antonio
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] Los simuladores son una herramienta esencial en la investigación de la Arquitectura de Computadores, ya que proporcionan una solución ágil y económica para el análisis preciso y eficiente de propuestas estructurales y microarquitectónicas para el diseño de CPU. Una de sus principales ventajas de estas herramientas es la capacidad de análisis de las prestaciones del procesador, permitiendo obtener un conocimiento profundo sobre el rendimiento de las etapas del pipeline y el estado de la máquina. Sin embargo, los simuladores actuales carecen de un modelado preciso de las Performance Monitoring Units (PMU) presentes en procesadores reales, lo que limita su capacidad para realizar ciertos análisis avanzados de rendimiento como el análisis Top-Down propuesto por Intel. En el presente trabajo se realiza la implementación de una PMU para el simulador gem5, incluyendo la capacidad de monitorizar aplicaciones ejecutándose en procesadores con soporte a multihilo SMT (Simultaneous Multi-Threading). Los resultados muestran la viabilidad y utilidad de esta nueva funcionalidad, que permite realizar análisis Top-Down de cargas de trabajo SPEC CPU tanto monohilo como multihilo., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovacion junto al FEDER europeo a traves de los proyectos PID2021-123627OB-C51 y TED2021-130233B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Stratus: A Hardware/Software Infrastructure for Controlled Cloud Research

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Huang, Chaoyi
[EN] Cloud systems deploy a wide variety of shared resources and host a large number of tenant applications. To perform cloud research, a small experimental platform is commonly used, which hides the huge system complexity and provides flexibility. Despite being simpler, this platform should include the main cloud system components (hardware and software) to provide representative results. A wide set of platforms have spread in recent years; however, most of them only include a major cloud component or lack the deployment of virtual machines (VMs) to provide isolation. This paper presents Stratus, an experimental platform that is currently being used to carry out cloud research. To the best of our knowledge, Stratus is the only platform that jointly provides three main features: uses VMs to isolate tenant applications, deploys the three types of cloud nodes (server, client, and storage), and manages all main shared system resources (CPUs, LLC space, memory, network, and disk bandwidth). Moreover, Stratus implements a software manager to ease the research and aid the design of QoS-aware policies. The manager integrates three main functionalities: management and control of the execution of VMs and running applications, monitoring of hardware performance counters and system resource utilization, and partitioning of the main shared system resources by using technologies available in commercial processors., This work has been partially supported by Huawei Cloud, by the Spanish Ministerio de Universidades under the grant FPU18/01948, and by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grants PID2021- 123627OB-C51 and TED2021-130233B-C32, and by Generalitat Valenciana under Grant AICO/2021/266.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de una infrastructura para la investigación en cloud computing

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] Los sistemas en la nube despliegan una amplia variedad de recursos compartidos y albergan un gran número de aplicaciones. Para realizar investigación dentro de este ámbito, se suele emplear un sistema reducido que oculta la enorme complejidad de los sistemas reales y proporciona flexibilidad para gestionar los recursos. A pesar de ser más sencillos y a menor escala, estos sistemas experimentales deben incluir los principales componentes (hardware y software) de los sistemas de computación en la nube o cloud computing para proporcionar resultados representativos. Este trabajo presenta Stratus, una plataforma experimental que se está utilizando actualmente para llevar a cabo investigación en cloud computing. A diferencia de otras plataformas existentes, Stratus es la única plataforma que ofrece conjuntamente todas las características principales de estos sistemas: uso de máquinas virtuales (MV) para ejecutar las aplicaciones de los usuarios, despliegue de los tres tipos de nodos de la nube (servidor, cliente y almacenamiento) y gestión de los principales recursos compartidos del sistema (CPU, espacio de caché, ancho de banda de memoria, red y disco). Además, Stratus implementa un gestor de software para facilitar la investigación y ayudar al diseño de políticas orientadas a mejorar la calidad de servicio., Este trabajo ha sido financiado por Huawei Cloud, por el Ministerio de Universidades mediante la beca FPU18/01948, por el Ministerio de Ciencia e Innovacion junto al FEDER europeo a traves de los proyectos PID2021-123627OB-C51 y TED2021-130233BC32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Diseño de Políticas de Asignación de Hilos en Procesadores ARM SMT Basadas en Categorías

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] Los servidores HPC modernos integran procesadores simultaneous multithreading (SMT). Estos procesadores comparten los recursos internos del nucleo entre diversos hilos de ejecucion, lo cual les permite alcanzar mayores prestaciones. Sin embargo, esto introduce interferencias entre los hilos que se ejecutan en el mismo nucleo. Esta interferencia intranucleo pone en peligro la mejora de prestaciones y puede aumentar el tiempo de ejecucion. Las pol¿ticas de asignacion de hilos a nucleos (Thread-to-Core Allocation, T2C ) abordan este problema en dos pasos: (i) construir una performance stack por aplicacion usando contadores hardware y (ii) predecir las parejas afines de aplicaciones y asignarlas al mismo nucleo. Este art¿culo presenta la Instructions and Stall Cycles (ISC) stack, un nuevo enfoque diseñado para procesadores ARM resolviendo las limitaciones de la PMU de estos procesadores. Estas stacks de ISC se utilizan en un modelo de prediccion para determinar las parejas afines que ayuden a mejorar las prestaciones. Este trabajo presenta el diseño y analisis de SYNPA, una familia de pol¿ticas T2C guiada por modelos de prediccion de prestaciones basados en stacks de ICS. Los experimentos demuestran que SYNPA4, la mejor variante, reduce el tiempo de ejecucion en un 38 % frente a Linux, logrando 3× las mejoras de pol¿ticas del estado del arte. SYNPA4 se puede aplicar a otros procesadores SMT siguiendo la metodolog¿a presentada en este trabajo., Este trabajo ha sido parcialmente financiado por por el Ministerio de Ciencia e Innovacion junto al FEDER europeo a traves de los proyectos PID2021-123627OB-C51 y TED2021-130233B-C32. Marta Navarro tiene la beca de Subvenciones para la contratacion de personal investigador predoctoral by CIACIF/2021/413. Josue Feliu cuenta con el apoyo del contrato RYC2021-030862-I financiado por MCIN/AEI /10.13039/501100011033 y por la Union Europea NextGenerationEU/PRTR.