Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Reliability-based structural assessment of historical masonry arch bridges: The case study of Cernadela bridge

  • Bouzas Rodriguez, Óscar
  • Conde Carnero, Borja
  • Campos e Matos, Jose
  • Solla Carracelas, Maria Mercedes
  • Cabaleiro Núñez, Manuel
Nowadays, several historical masonry arch bridges present a deficient state of conservation due to degradation processes induced by natural or human actions. Usually, these constructions have significant economic, cultural, and heritage value. Therefore, they shall be thoroughly assessed to verify their structural integrity and safety condition. For this purpose, reliability-based structural assessments are typically performed. However, the associated outcomes (i.e., reliability index and probability of failure) highly rely on the accuracy of the structural parameters uncertainty quantification. This work presents a study regarding the influence of the scattering of the arches' thickness dimensions in the load-carrying capacity assessment of the Cernadela Bridge, a historical stone bridge located in Galicia, Spain. The study first involved a comprehensive experimental campaign to characterize the outer and inner bridge geometry through geomatic techniques, i.e., terrestrial laser scanning and ground penetrating radar. Subsequently, a limit analysis model was developed, considering only the arches' outer (visible) data. From this initial structural assessment, a reliability index of 2.38 was obtained. The influence of the uncertain structural parameters, both geometric features and material properties, in the collapse load was investigated through a global variance-based sensitivity analysis (i.e., Sobol' indices) complemented by a surrogate modeling strategy based on the Kriging approach. Finally, the measured inner geometry of the arches was introduced in the computational model through Bayesian inference procedures. Thus, two new structural assessments were performed: first, by considering the updated distributions of all arches thicknesses, and second, by considering only the updated distributions of the non-influential ones. Reliability indexes of 1.51 and 2.33 were derived, thus highlighting the importance of a proper uncertainty quantification process and the relevance of the sensitivity analysis outcomes to identify the critical parameters on the bridge mechanical response., Ministerio de Ciencia e Innovación | Ref. TED2021-130497A-I00, Ministerio de Ciencia e Innovación | Ref. RYC2019-026604-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Elastic structural assessment of clamp-based steel beam-to-column connections for reusable steel systems

  • Nunes Cavalheiro, Fernando
  • Cabaleiro Núñez, Manuel
  • Conde Carnero, Borja
  • Cruz Cadaya, Yago
The increasing demand for modular and reusable steel structures has driven the development of demountable connections that preserve the integrity of structural components. This study investigated the structural performance of beam-to-column connections using clamp-based fastening systems, operating strictly within the elastic regime and targeting applications in temporary systems and industrial platforms. Two triangular steel frame configurations (180 mm and 260 mm), differing in clamp capacity and hole arrangement, were experimentally tested and numerically modeled to assess their influence on load-bearing capacity, displacements, and stress distribution. Experimental tests were conducted with controlled bolt pretension and progressive vertical loading, continuously monitoring displacements and applied forces. The finite element model (FEM), validated with high correlation (>97%) to the experimental data, confirmed that all configurations remained within the elastic domain. Results showed that increasing the number of clamps significantly enhanced both stiffness and load capacity, with gains of up to 27.3% depending on the configuration, while reductions exhibited a nonlinear performance loss. Stress concentrations were observed in clamp contact regions without plasticization. Overall, clamp-based connections demonstrated efficient structural performance and alignment with design-for-deconstruction and circular economy principles, proving to be technically feasible for systems requiring reusability and adaptability., Agencia Estatal de Investigación | Ref. TED2021–130497A-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Analysis of the mechanical behaviour of an innovative removable clamps-based connection system for steel square and rectangular profiles

  • Cabaleiro Núñez, Manuel
  • González Gaya, Cristina
  • Conde Carnero, Borja
  • Caamaño Martinez, Jose Carlos
This work studies a new 90º connection system based on clamps for a square or rectangular steel profile, which can be used on existing structures without any prior or invasive operations. The main field where this connection system could be used would be in industrial plants, since it allows the reuse of industrial structures as many times as necessary, depending on each layout change, thus obtaining significant economic savings. This work aims to analyse the behaviour of this new type of connection using a 3D FEM-based numerical analysis procedure, previously validated against experimental tests. In this research, it has been possible to identify four behavioural modes, the first of which, linear behaviour, is the most suitable for the operational work of this type of connection. The distance between the bolts, one of the most important variables affecting the mechanical response, is parameterised and analysed in a numerical model. According to the results, the strength of the joint improves as the distance between the bolts increases, but this also means larger clamps and the need for more space., Agencia Estatal de Investigación | Ref. TED2021-130497A-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Removable, reconfigurable, and sustainable steel structures: a state-of-the-art review of clamp-based steel connections

  • Cabaleiro Núñez, Manuel
  • Conde Carnero, Borja
  • González Gaya, Cristina
  • Barros Gonzalez, Brais
In this review paper, first of all, an analysis of the circular economy and its application to steel structures is carried out. It highlights the need to apply the philosophy of Design for Deconstruction or Design for Disassembly (DfD) from the conception of the structure so that it can be truly reconfigurable. Then, a brief review of the different types of connections for steel structures is conducted, comparing the level of research and development of each of them and the degree of reconfiguration that is possible to obtain. Subsequently, the article focuses on the type of connection using clamps, a key point of this work and on which, to date, there are no state-of-the-art studies. It describes the types of clamps, their principle of operation, the types of connections developed with them, and the results of the different investigations that allow for calculating these types of connections. A summary is also given of how these connection types work according to the geometrical characteristics of the clamp and the bolt so that this review work can serve as a driver for the widespread use of clamp-based connections by researchers and engineers in the design and manufacturing of demountable and reconfigurable steel structures. Finally, some conclusions are given, indicating the advantages and disadvantages of this connection system and future lines of research., Ministerio de Ciencia e Información | Ref. TED2021-130497A-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A novel fully removable walkway system with non-invasive anchors for structural health inspection and maintenance of historic steel structures

  • Cabaleiro Núñez, Manuel
  • Conde Carnero, Borja
  • González Gaya, Cristina
  • Barros Gonzalez, Brais
Historic steel structures are generally heritage constructions that must be preserved, where invasive operations such as welding or drilling cannot be performed. Any auxiliary structures installed on these constructions must be easily removable. In addition, historic steel structures such as riveted bridges are difficult to access, making it very difficult to take measurements using contact techniques or to perform structural health inspections. One of the most common needs is the installation of walkways for inspection and especially for maintenance and repair purposes. In this sense, clamp-based connections are a technique for fabricating dismountable systems that allow anchoring to existing structures without performing invasive operations such as welding or drilling. This study proposes, develops, simulates, and tests a novel non-invasive detachable anchorage system for the assembly of temporary walkways for inspecting and maintaining historic steel structures without additional scaffolding. In addition, a methodology is proposed for the easy and correct installation of the proposed system by combining it with LiDAR techniques. The developed system has been assembled and tested in laboratory tests and two real case studies., Agencia Estatal de Investigación | Ref. TED2021-130497A-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

BIM methodology for cost analysis, sustainability, and management of steel structures with reconfigurable joints for industrial structures

  • Pereiro Matalobos, Javier
  • Cabaleiro Núñez, Manuel
  • Conde Carnero, Borja
  • Riveiro Rodríguez, Belén
One of the main objectives set for future factories, and for Industry 4.0, is to reduce the CO2 footprint of industrial plants and their buildings as much as possible. This objective must be compatible with economic savings, an essential requirement for investments in industrial production plants and their buildings. Industrial structures represent an important part of investments in industrial facilities and equipment. In order to achieve the objectives mentioned above, it is necessary to use fully reconfigurable and reusable structures. This work aims to propose and apply a methodology using BIM (Building Information Modelling) technology that allows for the analysis, control, and monitoring of economic profitability and sustainability ratios over time (for structures with reconfigurable joints compared to those with welded joints). The proposed methodology was applied to three different case studies, where various reconfigurations of the structures were done over time, obtaining the structure’s economic profitability with reconfigurable joints from the third reconfiguration and environmental sustainability from the second reconfiguration. The results demonstrate that the BIM methodology presented in this work and applied to industrial structures is a fully adequate tool for analyzing the structures’ costs and sustainability and controlling for monitoring these structures throughout the different reconfigurations., Agencia Estatal de Investigación | Ref. TED2021-130497A-I00, Universidade de Vigo/CISUG