Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Activities on a Hydrogen-Fueled Spark-Ignition Engine for Light-Duty Applications

  • Molina, Santiago|||0000-0001-7879-2421
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Olcina-Girona, Miguel
[EN] The increase in the overall global temperature and its subsequent impact on extreme weather events are the most critical consequences of human activity. In this scenario, transportation plays a significant role in greenhouse gas (GHG) emissions, which are the main drivers of climate change. The decline of non-renewable energy sources, coupled with the aim of reducing GHG emissions from fossil fuels, has forced a shift towards a net-zero emissions economy. As an example of this transition, the European Union has set 2050 as the target for achieving carbon neutrality. Hydrogen (H2) is gaining increasing relevance as one of the most promising carbon-free energy vectors. If produced from renewable sources, it facilitates the integration of various alternative energy sources for achieving a carbon-neutral economy. Recently, interest in its application to the transportation sector has grown, including different power plant concepts, such as fuel cells or internal combustion engines. Despite exhibiting significant drawbacks, such as low density, combustion instabilities, and incompatibilities with certain materials, hydrogen is destined to become one of the future fuels. In this publication, experimental activities are reported that were conducted on a spark-ignition engine fueled with hydrogen at different operating points. The primary objective of this research is to gain a better understanding of the thermodynamic processes that control combustion and their effects on engine performance and pollutant emissions. The results show the emission levels, performance, and combustion characteristics under different conditions of dilution, load, and injection strategy and timing., This research has been partially funded by Agencia Estatal de Investigación of the Spanish Government through projects PID2020-118387RB-C31 (AHEAD) and TED2021-130596B-C21 (BIOH2FUEL). M. Olcina-Girona is partly supported by the grant CIACIF/2021/437 of the Subvenciones para la contratación de personal investigador predoctoral (ACIF) of the Conselleria d Innovació, Universitats, Ciència i Societat Digital de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advanced combustion strategies for enhanced performance and emissions control in light-duty hydrogen internal combustion engines

  • Molina, Santiago|||0000-0001-7879-2421
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Echavarria-Olaya, Juan David|||0000-0002-9611-0751
  • Olcina-Girona, M.
  • Gessaroli, D.
  • Pesce, F. C.
[EN] This study experimentally investigates combustion and emission control strategies for a spark-ignition direct-injection hydrogen (DI-H2) engine operating under high-load and high-speed conditions. The work systematically evaluates the influence of air dilution, exhaust gas recirculation (EGR), multi-pulse injection, and water injection on combustion phasing, knock tendency, and cycle-to-cycle variability. Results show that air dilution effectively reduces NOx emissions-particularly at high excess air ratios (lambda >= 2.2), while maintaining stable combustion and high efficiency. Advancing combustion phasing toward TDC improves indicated efficiency levels but increases knocking risk at lower dilution levels (lambda = 2.0). EGR dilution, at a fixed lambda = 2.3, further decreases NOx but leads to unstable operation and reduced gross indicated efficiency (GIE). Multi-pulse injection strategies, in which approximately 20% of the total injected fuel mass is shifted from the main pulse to an early pilot injection during the intake stroke, provide no efficiency gain and increase stability and NOx compared with single-pulse operation. In contrast, moderate water injection (water-to-hydrogen mass ratio of approximately 2) achieves over 50% NOx reduction with acceptable combustion stability, while excessive injection (water-to-hydrogen mass ratio of 3) degrades efficiency and stability. Overall, the results highlight air dilution as the most effective strategy for balancing efficiency, emissions, and stability, while water injection offers promising potential for additional NOx control and knock mitigation. These findings provide quantitative insights into optimizing combustion strategies for high-load DI-H2 engines and support the development of efficient, low-emission hydrogen combustion systems., This research has been partially funded by Agencia Estatal de Investigacion of the Spanish Government through project TED2021-130596B-C21 (BIOH2FUEL) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of medium-pressure direct injection in a spark-ignition engine fueled by hydrogen

  • Molina, Santiago|||0000-0001-7879-2421
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Olcina-Girona, Miguel
[EN] In the automotive sector, hydrogen is being increasingly explored as an alternative fuel to replace conventional carbon-based fuels. Its combustion characteristics make it well-suited for adaptation to internal combustion engines. The wide flammability range of hydrogen allows for higher dilution conditions, resulting in enhanced combustion efficiency. When combined with lean combustion strategies, hydrogen significantly reduces environmental impact, virtually eliminating carbon dioxide and nitrogen oxide emissions while maintaining high thermal efficiency. This paper aims to assess the potential of using an outwardly opening poppet valve hydrogen direct injection (DI) system in a small engine for light-duty applications. To achieve this, a comparison of performance, emission levels, and combustion parameters is conducted on a single-cylinder spark-ignition (SI) research engine fueled by hydrogen, using both port fuel injection (PFI) and this new direct injection system. Two different engine loads are measured at multiple air dilution and injection timing conditions. The results demonstrate notable efficiency improvements, ranging from 0.6% to 1.1% when transitioning from PFI to DI. Accurate control of injection timing is essential for achieving optimal performance and low emissions. Delaying the start of injection results in a 7.6% reduction in compression work at low load and a 3.9% reduction at high load. This results in a 3.1-3.2% improvement in ISFC in both load conditions considered., This research has been partially funded by Agencia Estatal de Investigacion of the Spanish Government through project TED2021-130596B-C21 (BIOH2FUEL).M. Olcina-Girona is partly supported by the grant CIACIF/2021/437 of the "Subvenciones para la contratacion de personal investigador pre-doctoral (ACIF)"of the Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital de la Generalitat Valenciana.Funding for open access charge: CRUE-Universitat Politecnica de Valencia.