Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical performance enhancement of perovskite-type Li0.3La0.57TiO3 ceramic electrolyte by controlling synthesis parameters

  • Mena, Maycol F.
  • Vásquez, F.A.
  • Florentin, O.
  • Mosa Ruiz, Jadra
  • Aparicio, Mario
  • Calderón, J.A.
  • Rosero-Navarro, Nataly Carolina
This study investigates the enhancement of the electrochemical performance of perovskite-type Li0.3La0.57TiO3 (LLTO) solid electrolytes through the optimization of synthesis parameters of a sol-gel process. The primary focus lies in examining the impact of calcination temperature on the structural, morphological, and electrochemical properties of LLTO. Our findings reveal that controlling the calcination temperature significantly influences the grain boundary resistance and overall ionic conductivity. The optimal calcination temperature was identified to be 800 °C, yielding a remarkable improvement in ionic conductivity at grain boundaries (0.88 mS/cm), and total ionic conductivity (0.54 mS/cm), at 30 °C. This enhancement is attributed to the refined microstructure, increased density, and reduced porosity, which collectively facilitate lithium-ion diffusion. These advancements in LLTO electrolytes present promising implications for their application in all-solid-state lithium-ion batteries, offering a safer and more efficient alternative to conventional liquid electrolyte systems. © 2024 The Authors, We would like to express our acknowledgements and thanks to the Microxide projects: TED2021–130911B-I00, funded by MCIN/AEI/ 10.13039/501100011033, and by the European Union ‘NextGenerationEU’/ PRTR, as well as the Colombian Ministry of Science, Technology and Innovation ‘Minciencias’ for their financial support through the scientific project 82459, Contract No: 2023–0685. Maycol F. Mena would like to thank the Ministry of Science, Technology and Innovation of Colombia ‘Minciencias’ for the Doctoral Scholarship: 2020 (BPIN 2020000100391). In addition, the authors would like to thank the project ‘Development of scientific capabilities for the investigation of infrastructure deterioration processes in renewable energy systems in the department of Choc´o (Colombia), BPIN 2020000100330’, which is being carried out by the Technological University of Choc´o (Colombia) at Diego Luis C´ordoba and the Center for Research in Renewable Energies and Climatology for their technical support and advice, which is being funded by the Science, Technology and Innovation Fund (STIF) of General System of Grants (GSG), of the department of Choc´o (Colombia), Oceane Florentin thanks Erasmus+ Programme for supporting educational training internship, agreement 177941-2023., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Temperature during Open Vessel Sintering on Li6PS5Cl Solid-State Electrolyte Powders for Use in Cathode Composite Electrodes

  • Warren, Zachary
  • Seghers, Miguel
  • Boissière, Pierre
  • Aparicio, Mario
  • Rosero-Navarro, Nataly Carolina
The sulfide solid electrolyte Li6PS5Cl has beenshown to be an ideal candidate for use in composite electrodes forall solid-state lithium-ion batteries due to its high ionicconductivity, low activation energy, and rapid processability insolvents (solution-based processing). Many reports for solution-based processing of Li6PS5Cl required the electrolyte to bedensified or sealed inside of a closed-quartz vessel prior to a finalhigh-temperature sintering step. This pre-sintering step is useful forunderstanding the full electrochemical properties of the electrolytebut provides little information about usable electrolyte powders forcommercialization. Modern applications of solid electrolytepowders require a feedstock of powdered electrolyte, which canbe processed by tape-casting, screen-printing, aerosol deposition,electrophoretic deposition, and hot powder rolling. The lack of information regarding the sintering of Li6PS5Cl powders for bulkprocessing warrants an investigation into open vessel sintering of solely the Li6PS5Cl electrolyte powders, which can later be used incomposite electrodes. This research uses a solution-based processing technique to synthesize Li6PS5Cl prior to sintering in open-topborosilicate glass containers. Here we show the effects that sintering temperatures have on Li6PS5Cl electrolyte powders duringopen-vessel sintering using X-ray diffraction, scanning electron microscopy, and Raman spectroscopy for morphological analysis.Electrochemical characterization was performed using AC electrical impedance spectroscopy, cyclic voltammetry, andchronoamperometry. Lastly, a full solid-state electrochemical cell was constructed with a cathode composite electrode madefrom the Li6PS5Cl to illustrate the functionality of the electrolyte., This research work is part of PIE project “Innovative andDesigned (Electro)-Chemistry, All-in-One for Lithium SulfideSolid Electrolytes” (IDEAL-Li), reference 20226AT009supported by The Spanish National Research Council(CSIC). Financial support of this work through Ramon yCajal Grant No. RYC2020−029909-I of The Spanish StateResearch Agency to N.C. Rosero-Navarro. Partially supportedby Microxide Project of The Spanish State Research Agency,TED2021−130911B−I00, funded by MCIN/AEI/10.13039/501100011033, and by the European Union “NextGener-ationEU”/PRT. Pierre Boissiè re thanks Erasmus+ Programmefor supporting educational training internship, agreement174191-2023, Peer reviewed