Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gasification kinetics of chars from diverse residues under suitable conditions for the Sorption Enhanced Gasification process

  • Grasa Adiego, Gemma
  • Martínez Berges, Isabel
  • Murillo Villuendas, Ramón
5 figures, 5 tables., Gasification kinetics for six chars from residual origin have been determined in a relatively low temperature range, low CO2 and high H2O partial pressures, typical from Sorption Enhanced Gasification (SEG) processes. In general, models based on the Random Pore Model (RPM) are the best fitting experimental results, but ash composition (in terms of alkali and alkaline earth metals) was crucial for the selection of the reaction model to be applied. Char conversion from biogenic waste with ash content higher than 30 % wt. was modelled with RPM model, but reaction rate for chars with the highest K/Si ratio was better described with modified versions of the RPM capable of predicting maximum reaction rates at high char conversion. For chars with similar ash content and composition, textural properties determined the pre-exponential factor and the activation energy for the gasification reaction (with both CO2 and H2O), while identical fitting parameters for the semi-empirical model were capable of predicting char conversion with time., This work was supported by the Spanish Ministry of Science and Innovation, the State Research Agency and the European Funds for Regional Development (No. RTI2018-095575-B-I00, MCI/AEI/FEDER, UE). The authors also acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness (PTI + TransEner TRE2021-03-005) and from the Spanish Ministry of Science and Innovation (TED2021-131768B–I00, no:236027). Isabel Martínez thanks the grant RYC2019-026929-I funded by MCIN/AEI/10.13039/501100011033 and AEI “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diseño de un catalizador de níquel soportado sobre mayenita/ óxido de calcio para el craqueo de alquitranes presentes en un gas proviente de un proceso de gasificación

  • Ordóñez Millán, Carlos
  • Martínez Berges, Isabel
  • Murillo Villuendas, Ramón
1 tabla.-- Abstract de la comunicación oral presentada en la XVI REUNIÓN GEC 2023 en la sección Aplicaciones catalíticas, medioambientales y biosanitarias, Gijón (España), celebrada del 22 al 25 de octubre de 2023., La gasificación asistida con CaO es una tecnología prometedora para la obtención de H2 a partir de biomasa o residuos. Sin embargo, como cualquier proceso de gasificación, este proceso también genera especies contaminantes no deseadas, tales como alquitranes y compuestos con Cl y S. La posterior utilización del gas obliga a eliminar en la medida de lo posible estos compuestos mediante distintas etapas de limpieza. Generalmente, los sistemas de eliminación de especies de Cl y S en caliente, operan a temperaturas en torno a 500-700ºC, bastante inferiores que la etapa de reformado de alquitranes, que suele llevarse a cabo en último lugar a temperaturas por encima de 850ºC para conseguir elevadas eficacias de descomposición, resultando así en una pérdida de eficiencia energética del proceso global. El objetivo de este trabajo es la síntesis y estudio de un catalizador de níquel soportado sobre mayenita/CaO (Ni-MCaO), que pueda ser utilizado en un proceso catalítico de reformado de alquitranes provenientes de un proceso de gasificación asistida con CaO, que opere a una menor temperatura que los catalizadores comerciales de craqueo y permita mejorar la eficiencia energética global del proceso de conversión de residuos/biomasa., Los autores agradecen el proyecto TED2021-131768B-I00 financiado por MCIN/AEI/10.13039/501100011033 y por la Unión Europea “NextGenerationEU/PRTR”. I. Martínez agradece la ayuda RYC2019-026929-I financiada por MCIN/AEI/10.13039/501100011033 y por EI FSE invierte en tu futuro. C. Ordóñez agradece la ayuda PRE2019-090024 financiada por MCIN/AEI/ 10.13039/501100011033 y por FSE Invierte en tu futuro., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nickel catalyst supported on mayenite/CaO for the catalytic steam reforming of a tar model compound

  • Ordóñez Millán, Carlos
  • Martínez Berges, Isabel
  • Murillo Villuendas, Ramón
14 figures, 4 tables., In this work, a Ni-mayenite/CaO catalyst was synthetized, characterized and tested as a tar reforming catalyst for a gas with a composition typical of a biomass gasification process under lower temperature conditions than commercial reforming catalysts. Moreover, a reduced Ni content of 5 wt% was used and different operating variables (temperature, steam excess and presence of H2, CO2, CO and CH4) were studied. It was confirmed that regardless the variations in the composition of the gas entering the reforming reactor, the conversion of toluene (used as tar model compound) was complete at 700 ºC and high space velocities (ca. 90000 h−1 with respect to total gas and ca. 5 kgtoluene/kgreduced cat·h) with minimal coke deposition. In addition, reaction-regeneration cycles were conducted under different regeneration temperatures and gas mixtures for the removal of the deposited solid carbon. Finally, the catalytic activity of this novel catalyst was tested against several commercial catalysts at 700 ºC, demonstrating the superior performance of the 5 % Ni-mayenite/CaO compared to any of the Ni-based commercial catalysts studied., This work has received funding from project TED2021–131768B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Carlos Ordóñez thanks the grant PRE2019–090024 funded by MCIN/AEI/10.13039/501100011033 and EI ‘‘ESF Investing in your future”. Also, authors acknowledge the partial financial support of the Regional Government of Aragón through the Research Groups Funding Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrated sorption enhanced gasification and reforming for hydrogen-rich gas production from olive stones

  • Martínez Berges, Isabel
  • Ordóñez Millán, Carlos
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • Murillo Villuendas, Ramón
7 figures, 3 tables., This study explores the production of hydrogen-rich gas from olive stones via sorption enhanced gasification (SEG). A pilot-scale 30 kWth bubbling fluidized bed gasifier was integrated with a downstream gas cleaning and conditioning train consisting of two fixed-bed reactors, including chlorine, sulphur, and tar removal stages. Operating the gasifier at 660 °C under high steam-to-carbon conditions resulted in a hydrogen content of 80 vol% (dry basis) and a yield of 1 Nm3 H2/kg biomass. Although this operating regime produced about 9 vol% CH4, subsequent tar reforming at 850 °C and 20000 h−1 space velocity enabled complete CH4 and tar conversion, yielding a clean hydrogen-rich product gas. Tar levels were reduced to 2 g/Nm3 (GC-MS) and 0.7 g/Nm3 (gravimetric). These findings demonstrate that the integrated optimization of gasification and reforming processes enhances hydrogen yield and purity, highlighting the potential of SEG as a promising route toward renewable hydrogen-rich gas production from biomass., This work has received funding from project TED2021-131768B–I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU/PRTR”. Carlos Ordóñez thanks the grant PRE2019-090024 funded by MCIN/AEI/10.13039/501100011033 and ‘‘ESF Investing in your future”. Authors thank the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+) as part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. Moreover, authors acknowledge the financial support of the Regional Government of Aragón through the Research Groups Funding Program and the company S.A.T. No. 5 'El Cierzo' for supplying the feedstock used in this study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Steam reforming of tars and light hydrocarbons in TRL-5 gasification-derived syngas over Ni/mayenite–CaO catalysts

  • Ordóñez Millán, Carlos
  • Martínez Berges, Isabel
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • Murillo Villuendas, Ramón
13 figures, 6 tables., Biomass gasification produces hydrogen-rich syngas but also generates tars and chlorine/sulfur contaminants that foul equipment and deactivate catalysts. Because Cl and S are removed at lower temperatures than those required for tar reforming (>800 °C), syngas reheating is usually necessary, leading to additional energy consumption. Lowering the reforming temperature would simplify gas cleaning and improve overall process efficiency. This study investigates a nickel-based catalyst supported on a mayenite/CaO matrix, specifically designed to operate at lower temperatures than conventional reforming catalysts. The catalyst was evaluated under real syngas conditions obtained from sorption-enhanced gasification and O2-steam gasification in a TRL-5 gasifier, using olive stones, grape seeds and municipal solid waste as feedstocks. An aliquot of the total syngas stream was treated, enabling assessment under industrially relevant and variable syngas compositions and flow conditions. Among the tested formulations, the catalyst containing 5 wt% Ni achieved near-complete reforming of tars and hydrocarbons at 725 °C, even at a high space velocity of 29,000 h−1. Operating at this lower temperature significantly reduces the temperature gap with upstream contaminant removal, minimizing reheating requirements and associated thermal duty. Overall, the results demonstrate effective low-temperature reforming, supporting more compact gas-cleaning systems and improved energy efficiency in biomass gasification processes., This work has received funding from project TED2021-131768B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU/PRTR”. Carlos Ordóñez thanks the grant PRE2019-090024 funded by MCIN/AEI/10.13039/501100011033 and ‘‘ESF Investing in your future”., Peer reviewed