Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Investigation of PM2.5 and PM10 Dynamics in the Caribbean Basin Using a Multifractal Framework

  • Plocoste, Thomas
  • Pavón Domínguez, Pablo
  • Sankaran, Adarsh
  • Euphrasie-Clotilde, Lovely
In response to increased desertification in Africa due to climate change, understanding the behavior of particulate matter with aerodynamic diameters less than or equal to 2.5 and 10 (PM2.5 and PM10) in the Caribbean is crucial. Fine particles originating from the African dust belt significantly impact the health of the Caribbean population. This study employs a multifractal framework to analyze PM2.5 and PM10 time series data in Puerto Rico from 2000 to 2010, marking the first such investigation in the Caribbean islands. Multifractal Detrended Fluctuation Analysis (MF-DFA) reveals similar multifractal behavior in PM2.5 and PM10 fluctuations, suggesting a shared influence on these pollutants. Hurst exponents of 0.594 for PM10 and 0.642 for PM2.5 indicate long-term persistence in particulate matter behavior. African dust notably influences PM10, displaying slightly greater intermittency. Shuffled and surrogate signal analyses confirm multifractality in PMs time series, representing long-range correlations in small and large fluctuations and broadness in probability density function. The primary contributor to multifractality in PM2.5 is identified as the broadness of the probability density function. Multifractal Detrended Cross-Correlation Analysis (MF-DXA) reveals anti-persistence in cross-correlated multifractal behavior of PMs. These insights enhance the understanding of PM2.5 and PM10 dynamics, aiding predictions of natural occurrences like sand mist and improving health risk management in the Caribbean basin.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Does faster mean greener? Runtime and energy trade-offs in iOS applications with compiler optimizations

  • Aragón Jurado, José Miguel
  • Bangash, Abdul Ali
  • Dorronsoro Díaz, Bernabé
  • Ali, Karim
  • Hindle, Abram
  • Ruiz Villalobos, Patricia
Smartphones outnumber people nowadays, requiring efficient energy management. High application energy use leads to faster battery drain and frequent recharging, negatively impacting both battery life and the environment. This cycle also contributes to rising electronic and chemical waste due to discarded mobile phone batteries. Compiler optimization flags may play a crucial role in mitigating these issues by optimizing software performance. However, there has been little research on examining how compiler optimization flags impact the energy consumption of smartphone applications. This work presents an empirical study on the effect of the most aggressive iOS compiler optimizations on runtime, power consumption, and energy consumption across six different iOS applications. For each application, we developed a benchmark focused on the specified category we aimed to study. Our results show that reducing application runtime does not always directly correlate with improved energy consumption. In fact, we observed that optimizations aimed at enhancing runtime performance often come at an energy cost in the applications studied, highlighting a trade-off between runtime and energy consumption. For example, we found that using -Ounchecked in Swift, combined with -Oz from LLVM in the GhostRun video game, increases energy consumption by 34%, despite improving runtime performance by 9%.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Sustainable waste collection optimization using electric vehicles

  • Peña Morales, David
  • Dorronsoro Díaz, Bernabé
  • Ruiz Villalobos, Patricia
Solid waste management is a crucial municipal service directly influencing urban livability. Optimizing refuse collection routes enhances service efficiency and reduces costs. The recent introduction of fully electric refuse trucks, boasting features like zero emissions, low noise, and lower operating costs compared to diesel trucks, holds promise. However, their limited autonomy presents challenges that need addressing before widespread deployment. This study proposes a realistic formulation for the refuse collection routing problem with electric trucks, introducing electromobility constraints never considered before in related works. The goal is to find optimal routes covering all collection points while minimizing travel distance within vehicle battery and capacity limits. An accurate energy consumption model is presented, accounting for route elevation, vehicle speed, waste collection operations, and regenerative braking. Genetic algorithms are used to find solutions to the problem, as well as the well-known Clarke and Wright heuristic for comparison purposes. The algorithms are tested on six diverse instances reflecting real-world scenarios in New York City (United States) and Puerto Real (Spain). Results indicate the genetic algorithm’s superiority, yielding solutions with reduced travel distance and consumption while requiring fewer routes compared to the state-of-the-art heuristic.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Analysing Public Bus Transport Networks Using Graphical Visualization Techniques

  • Díaz Jiménez, Marina
  • Ambrosio Costoya, Alba
  • Ruiz Villalobos, Patricia
  • Pavón Domínguez, Pablo
This is the accepted manuscript version of a contribution published in Springer conference proceedings. The final authenticated version is available online at: https://doi.org/10.1007/978-3-032-07058-6, The 2030 Agenda outlines a global roadmap for sustainable development, promoting prosperity while protecting the planet. Strict policies for reducing global warming are being implemented in most developed countries, with a special focus on road transport due to its significant contribution to pollutant emissions. Designing efficient and sustainable public transport systems is crucial and a complex task that requires important decision making for selecting strategies that balance sustainability, efficiency, operational cost and comfort. This work presents a graphical visualization framework that can be used as a decision support tool for analyzing public bus transport strategies. Specifically, graph theory is used to obtain structural information and descriptive parameters of the complete public bus transport of the urban area of Barcelona, and to graphically visualize it. Results show that it is a sparse but highly connected system, composed of predominantly low-degree nodes with a few central hubs in the city centre. The proposed framework allows for a realistic representation of the bus network and also facilitates quantitative and visual assessments for decision making.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Multivariable Visualization Tool of the Performance of Plug-In Hybrid Electric Buses

  • Aragón Jurado, José Miguel
  • Dorronsoro Díaz, Bernabé
  • Ruiz Villalobos, Patricia
The main objective of the European Green Deal is to achieve climate neutrality by 2050. Among the many challenges it implies, the decarbonization of cities must be accomplished. Although electric vehicles are the long-term solution for eradicating CO2 emissions, the deployment of fully electric public transport systems needs strong requirements, with plug-in hybrid electric buses being a flexible alternative to alleviate tailpipe emissions. These buses can automatically switch between an internal combustion engine and an electric motor using geo-fencing technology. However, the management of the capabilities and constraints of the zero tailpipe emission zones is not trivial. This work presents a graphical tool for supporting municipal authorities and decision makers in sustainable transport planning by means of visualizing the emissions and battery use of urban plug-in hybrid electric buses. Multiple bus strategies can be displayed at the same time, showing a relevant picture of the zero-emission zones in the city as well as the different pollutants emitted in each area. This information can be used to find out the most suitable powertrain use strategies, or zero emission zones, to be adopted by the different buses at every time in all routes so that the overall impact of urban transport on the livability and pollution is minimal, paving the way towards climate-neutral transport systems.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Evaluation of printing parameters in additive manufactured samples using fractal geometry of computed tomography images

  • Pardo Vicente, Miguel Ángel
  • Pavón Domínguez, Pablo
  • Moreno Nieto, Francisco Daniel
  • Herrera Collado, Miriam
Additive Manufacturing (AM) has already attained a reliable level of maturity, specifically Fused Filament Fabrication (FFF), emerging as the most widespread process. Concurrently, the industrial demand for these parts has increased, requiring the analysis of their internal geometry to determine the level of similarity achieved concerning the expected structures. This work aims to provide tools to characterize FFF parts by relating printing properties to geometrical variables. For this purpose, three samples were printed in Polylactic Acid (PLA) with three different layer heights and analyzed by X-ray Computed Tomography (CT). After processing the images, fractal analysis was carried out using the box-counting method on the voids that appear between the filaments in order to obtain the fractal dimension. The porosity of the voids was also calculated. The analysis identifies the parameters characterizing the voids as number, size, shape, and location. In contrast to traditional porosity studies, the novelty of this work is that fractal analysis provides information about shape and distribution of voids in a single value (fractal dimension). It was corroborated that the fractal dimension depends not only on porosity but also on the shape and location of the voids. Additionally, it was found that not all void parameters influence equally the geometrical variables; variables related to porosity (number and size of voids) are more relevant than shape and location. Finally, it was demonstrated that by knowing the parameters of layer height and extrusion flow, the ideal porosity and fractal dimension can be determined, and any deviation from these parameters indicates the geometric printing error incurred., MICIU/AEI/10.13039/501100011033 and by the European Union Next GenerationEU/PRTR
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Quantification and comparison of hierarchy in Public Transport Networks

  • Wang, Ziyulong
  • Huang, Ketong
  • Massobrio Lois, Renzo Martín
  • Bombelli, Alessandro
  • Cats, Oded
Network hierarchy describes the relative arrangement of network elements and reflects its fundamental structure. We propose a multi-dimensional topology-based method for quantifying and comparing the extent to which different Public Transport Networks (PTNs) exhibit a hierarchical structure. The proposed method considers the uneven distribution of node importance with different definitions (e.g., degree centrality and betweenness centrality) in a PTN, the clustering of nodes and the node connection patterns. We apply the developed method on 63 high-capacity PTNs worldwide using General Transit Feed Specification (GTFS) data. In addition to global indicators, we use the goodness-of-fit between the probability density function of local indicators and a skew-normal distribution to quantify the extent of PTN hierarchy. Results show that the scale-free network structure and preferential attachment do not vary much across PTNs. In contrast, stop accessibility and traffic intermediacy vary considerably across PTNs as reflected by the closeness centrality and betweenness centrality distributions. Lastly, metro systems exhibit a more hierarchical structure than their tram and Bus Rapid Transit (BRT) counterparts. This work makes a first step towards a better mapping and comparison of different PTNs, which can assist academics and practitioners in better (re)designing and planning the PTNs of the future.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Automatic Software Tailoring for Optimal Performance

  • Aragón Jurado, José Miguel
  • Torre Macías, Juan Carlos de la
  • Ruiz Villalobos, Patricia
  • Galindo Riaño, Pedro Luis
  • Zomaya, Albert Y.
  • Dorronsoro Díaz, Bernabé
Efficient green software solutions require being aware of the characteristics of both the software and the hardware where it is executed. Separately optimizing them leads to inefficient results, and there is a need for a perfect synergy between software and hardware for optimal outcomes. We present a novel combinatorial optimization problem for the minimization of the software execution time on a specific hardware, taking into account the existing uncertainty in the system. A solution to the problem is a sequence of LLVM code transformations, and a cellular genetic algorithm is used to find it. Assuming that hardware does not change, reducing the software runtime typically leads to a greener version with lower consumption. To cope with the uncertainty, two novel approaches relying on bootstrap method to compute confident intervals of the software runtime at negligible cost are proposed and compared to three other techniques and -O3 Clang compilation flag over four hardware architectures. Results show how the proposed approach effectively copes with the uncertainty, providing more robust solutions with respect to the compared methods. The execution time of the raw program is reduced from 28.1% to up to 63.2%, outperforming -O3 flag by 13.9% to 26.3%, for the different architectures., This work was supported by the Junta de AndalucÍa and ERDF (GENIUS – P18-2399), the Spanish Ministerio de Ciencia, Innovación y Universidades and ERDF (NEMOVISION– PID2019-109465RB-I00) and ERDF (OPTIMALE – FEDERUCA18-108393). This publication is part of TED2021-131880B-I00 project (eFracWare), funded MCIN/AEI/10. 13039/501100011033 and the European Union “NextGenerationEU”/PRTR and project eMob (PID2022-137858OBI00) funded by Spanish MCIN, the AEI and the ERDF on MCIN/AEI/10.13039/501100011033/FEDER, UE. This work was partially supported by the Spanish Ministry of Science and Innovation and ERDF (RED2018-102472-T). J.C. de la Torre and J.M. Aragón-Jurado would like to acknowledge the Spanish Ministerio de Ciencia, Innovación y Universidades for the support through FPU17/00563 and FPU21/02026 grants, respectively. J.M. Aragón-Jurado acknowledges the grant from Plan Propio - UCA 2022-2023. B. Dorronsoro and P. Ruiz acknowledge “ayuda de recualificación” funded by Ministerio de Universidades and the European Union-NextGenerationEU
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Multi-Signal Multifractal Detrended Fluctuation Analysis for Uncertain Systems —Application to the Energy Consumption of Software Programs in Microcontrollers

  • Torre Macías, Juan Carlos de la
  • Pavón Domínguez, Pablo
  • Dorronsoro Díaz, Bernabé
  • Galindo Riaño, Pedro Luis
  • Ruiz Villalobos, Patricia
Uncertain systems are those wherein some variability is observed, meaning that different observations of the system will produce different measurements. Studying such systems demands the use of statistical methods over multiple measurements, which allows overcoming the uncertainty, based on the premise that a single measurement is not representative of the system’s behavior. In such cases, the current multifractal detrended fluctuation analysis (MFDFA) method cannot offer confident conclusions. This work presents multi-signal MFDFA (MS-MFDFA), a novel methodology for accurately characterizing uncertain systems using the MFDFA algorithm, which enables overcoming the uncertainty of the system by simultaneously considering a large set of signals. As a case study, we consider the problem of characterizing software (Sw) consumption. The difficulty of the problem mainly comes from the complexity of the interactions between Sw and hardware (Hw), as well as from the high uncertainty level of the consumption measurements, which are affected by concurrent Sw services, the Hw, and external factors such as ambient temperature. We apply MS-MFDFA to generate a signature of the Sw consumption profile, regardless of the execution time, the consumption levels, and uncertainty. Multiple consumption signals (or time series) are built from different Sw runs, obtaining a high frequency sampling of the instant input current for each of them while running the Sw. A benchmark of eight Sw programs for analysis is also proposed. Moreover, a fully functional application to automatically perform MS-MFDFA analysis has been made freely available. The results showed that the proposed methodology is a suitable approximation for the multifractal analysis of a large number of time series obtained from uncertain systems. Moreover, analysis of the multifractal properties showed that this approach was able to differentiate between the eight Sw programs studied, showing differences in the temporal scaling range where multifractal behavior is found., This publication was supported by the projects eFracWare [TED2021-131880B-I00] funded by the Spanish MCIN and the European Union “NextGenerationEU”/PRTR on MCIN/AEI/10.13039/501100011033, and the project eMob [PID2022-137858OB-I00] funded by the Spanish MCIN, and the Agency and the European Regional Development on MCIN/AEI/10.13039/501100011033/FEDER, UE. This work was also supported by Junta de Andalucía and ERDF under contract P18-2399 (GENIUS), ERDF [OPTIMALE – FEDER-UCA18-108393], and the Spanish Ministerio de Ciencia, Innovación y Universidades and the ERDF [NEMOVISION PID2019-109465RB-I00]. J.C. de la Torre would like to acknowledge the Spanish Ministerio de Ciencia, Innovación y Universidades for the support through FPU grant [FPU17/00563]. B. Dorronsoro and P. Ruiz acknowledge “ayuda de recualificación” funding by Ministerio de Universidades and the European Union-NextGenerationEU.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Neuroevolved bi-directional LSTM applied to zero emission zones management in urban transport

  • Aragón Jurado, José Miguel
  • Torre Macías, Juan Carlos de la
  • Jareño Dorado, Javier
  • Dorronsoro Díaz, Bernabé
  • Zomaya, Albert Y.
  • Ruiz Villalobos, Patricia
Plugin hybrid electric buses (PHEB) are nowadays an essential technology for the decarbonization of cities, proposing a more flexible solution than fully electric buses. There are a few studies for the design of operational strategies for PHEBs (i.e., to choose the propulsion method to use along the route) to minimize tailpipe emissions and/or maximize the electric range of the bus. However, all of them offer static strategies that cannot dynamically adapt to unforeseen traffic events, which can significantly impact on the performance of the bus. In this work, we propose modeling the problem of finding optimal PHEB operational strategies as a classification problem, allowing the generation of pseudo-optimal strategies in very short computational times. The method designed, called ML-EPBO, takes decisions based on local information of the bus, as well as from the route, so it can adapt to any events causing unexpected traffic conditions. Neuroevolution is used in this work to fine-tune ML-EPBO for optimal performance. Results show how ML-EPBO instantly offer solutions highly competitive with the best existing techniques in the literature, which do not offer the possibility of dynamically adapting to unexpected traffic events because they make use of global knowledge of the problem and have high computational complexity. Indeed, the average accuracy value obtained by the model is over 99.2%, and the strategies proposed are predicted over 70% of the cases with 100% of accuracy, even outperforming the state of the art results by up to 4.7% in the level of emissions or 1.82% in the electric range.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Exploring multifractal geometry in directed complex networks

  • Díaz Jiménez, Marina
  • Pavón Domínguez, Pablo
  • Ruiz Villalobos, Patricia
  • Moreno Pulido, Soledad
Complex networks are fundamental for modelling and understanding a wide range of real-world applications or non-trivial systems. Understanding their multifractal geometry has become relevant in recent years. Various algorithms have been developed either to refine existing methods or to adapt them to different network topologies. However, multifractal analysis has never been applied to directed networks. In this work, we present a novel multifractal box-covering method for directed networks, referred as . To assess its applicability, state-of-the-art undirected networks have been used to generate the directed ones. Specifically, -flower, the generalized minimal model, scale-free and random networks are used as weakly connected networks. Krapivsky and small-world networks are used to generate the strongly connected ones. To evaluate the impact of the degree of directionality, has been evaluated with different percentages of directed edges. Results show that Krapivsky networks exhibit a clear multifractal structure, with a approximately 0.9, confirming the method’s effectiveness. In contrast, small-world networks display limited multifractality, with less than 0.16, decreasing as the rewiring probability becomes smaller. Moreover, adding directed shortcuts in small-world networks increases multifractality compared to the non-directed case. The weakly connected networks studied exhibit multifractality, which diminishes as the proportion of directed links increases. Higher directionality also increases the number of boxes required to cover the network and leads to a loss of multifractality, approaching monofractal behaviour. This loss is particularly pronounced in scale-free and random networks, whereas ring-based networks such as -flower and generalized minimal model preserve multifractality up to certain thresholds. The proposed method is further validated using two real-world directed networks, enabling a consistent multifractal analysis and distinguishing different multifractal behaviour.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Crossover detection based on variances of slope differences for multi-fractal detrended fluctuation analysis (MF-DFA)

  • Moreno Pulido, Soledad
  • Torre Macías, Juan Carlos de la
  • Ruiz Villalobos, Patricia
  • Pavón Domínguez, Pablo
Multi-fractal detrended fluctuation analysis (MF-DFA) describes long-range correlations across scales in time series in terms of the linear fittings of the fluctuation functions for every moment q considered. It is relatively common to find time scales, also called crossovers, where different linearities are found at each side of the , leading to different (multi-)fractal properties. Generally, crossovers are manually identified by experts, subject then to their skills and possible bias. In this work, a novel methodology based on the variances of the slope differences (CDV-A) is proposed to automatically detect crossovers. A set of synthetic fluctuation functions with different mono-fractal and multi-fractal features, different noise levels and known crossovers is generated to assess the CDV-A. Moreover, the proposed methodology is also applied to state of the art fluctuation functions in order to compare the proposed manual and automated locations of the crossovers. Results show the proposed methodology is highly accurate, specially in low noise synthetic fluctuation functions and in most of the real cases.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

GAGI: Game engine for Artificial General Intelligence experimentation

  • Torre Macías, Juan Carlos de la
  • Aragón Jurado, José Miguel
  • Crespo Álvarez, Abdón
  • Barcena González, Guillermo
Video games have been in the focus of the research and academic community for the last few years, with the study and experimentation of Artificial General Intelligence (AGI) standing out. AGI experimentation platforms allow to analyze and study, in a visual way, the behavior of different AI agents previously defined. In this work a novel game engine, called GAGI, capable of serving as an AGI experimentation platform is presented. As a game engine, GAGI is able to design and create novel 2D and 3D video games using C++ programming language. Moreover, GAGI provides the user with a unique environment for simulating and studying AI agents inside the created game. Users can deploy multiple AI agents while interacting with them in real time, improving the understanding of their interactions and behaviors. The features of the proposed software is compared against others widely-used game engines in the video games industry as well as in the research community, highlighting the advantages in terms of design capability and AI support. GAGI also offers the possibility to reproduce the experiments, opening up multiple possibilities for the research community.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Big Data Analysis for Travel Time Characterization in Public Transportation Systems †

  • Nesmachnow, Sergio
  • Massobrio Lois, Renzo Martín
  • Guridi, Santiago
  • Olmedo, Santiago
  • Tchernykh, Andrei
In this article, we introduces a model based on big data analysis to characterize the travel times of buses in public transportation systems. Travel time is a critical factor in evaluating the accessibility of opportunities and the overall quality of service of public transportation systems. The methodology applies data analysis to compute estimations of the travel time of public transportation buses by leveraging both open-source and private information sources. The approach is evaluated for the public transportation system in Montevideo, Uruguay using information about bus stop locations, bus routes, vehicle locations, ticket sales, and timetables. The estimated travel times from the proposed methodology are compared with the scheduled timetables, and relevant indicators are computed based on the findings. The most relevant quantitative results indicate a reasonably good level of punctuality in the public transportation system. Delays were between 10.5% and 13.9% during rush hours and between 8.5% and 13.7% during non-peak hours. Delays were similarly distributed for working days and weekends. In terms of speed, the results show that the average operational speed is close to 18 km/h, with short local lines exhibiting greater variability in their speed.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Release 2.0—NESIM-RT: A real-time distributed spiking neural network simulator

  • Quintana Velázquez, Fernando Manuel
  • Torre Macías, Juan Carlos de la
  • Barcena González, Guillermo
  • Guerrero Lebrero, María de la Paz
  • Guerrero Vázquez, Elisa
NESIM-RT is a specialized tool designed for simulating neuromorphic systems. In this new release we extend its capabilities to include state-of-the art models like the AdexLIF and Izhikevich, and to incorporate dynamic synaptic mechanisms such as Spike-Timing Dependent Plasticity (STDP). With these new features, researchers can now observe in real-time how different parameters influence these models and learning rules, thereby gaining deeper insights into neuronal function and network dynamics., This work was also supported by the project NEMOVISION from the Ministerio de Ciencia e Innovación, PID2019-109465RB-I00/ AEI/10.13039/501100011033 and by the Junta de Andalucía and ERDF (GENIUS –P18-2399), and ERDF (OPTIMALE – FEDER-UCA18-108393). It is also part of the project TED2021-131880B-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union ‘‘NextGenerationEU’’/PRTR.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Source code obfuscation with genetic algorithms using LLVM code optimizations

  • Torre Macías, Juan Carlos de la
  • Jareño Dorado, Javier
  • Aragón Jurado, José Miguel
  • Varrette, Sébastien
  • Dorronsoro Díaz, Bernabé
With the advent of the cloud computing model allowing a shared access to massive computing facilities, a surging demand emerges for the protection of the intellectual property tied to the programs executed on these uncontrolled systems. If novel paradigm as confidential computing aims at protecting the data manipulated during the execution, obfuscating techniques (in particular at the source code level) remain a popular solution to conceal the purpose of a program or its logic without altering its functionality, thus preventing reverse-engineering on the program even with the help of computing resources. The many advantages of code obfuscation, together with its low cost, makes it a popular technique. This paper proposes a novel methodology for source code obfuscation that can be used together with other traditional obfuscation techniques, making the code more robust against reverse engineering attacks. Three program complexity metrics are used to define three different single-objective combinatorial optimization versions of the problem, which are solved and analysed. Additionally, three multi-objective problems are defined, those considering each of the selected metrics together with the program execution time, in order to avoid strong obfuscations penalizing the performance. The goal of the defined problems is to find sequences of LLVM optimizations that lead to highly obfuscated versions of the original code. These transformations are applied to the back-end pseudo-assembly code (i.e., LLVM Intermediate Representation), thus avoiding any further optimizations by the compiler. Classical genetic algorithms (GAs) are used to solve the studied problems, namely a basic cellular GA for the single-objective problems and the popular NSGA-II for the multi-objective ones. The promising results show the potential of the proposed technique.