Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Connection between weather types and air pollution levels: a 19-year study in nine EMEP stations in Spain

  • Pardo Gómez, Nuria
  • Sainz Villegas, Samuel
  • Calvo Gordaliza, Ana Isabel
  • Blanco Alegre, Carlos del
  • Fraile Laiz, Roberto
This article belongs to the Special Issue 2nd Edition of Integrated Human Exposure to Air Pollution, [EN] This study focuses on the analysis of the distribution, both spatial and temporal, of the PM10 (particulate matter with a diameter of 10 µm or less) concentrations recorded in nine EMEP (European Monitoring and Evaluation Programme) background stations distributed throughout mainland Spain between 2001 and 2019. A study of hierarchical clusters was used to classify the stations into three main groups with similarities in yearly concentrations: GC (coastal location), GNC (north–central location), and GSE (southeastern location). The highest PM10 concentrations were registered in summer. Annual evolution showed statistically significant decreasing trends in PM10 concentration in all the stations covering a range from −0.21 to −0.50 µg m−3/year for Barcarrota and Víznar, respectively. Through the Lamb classification, the weather types were defined during the study period, and those associated with high levels of pollution were identified. Finally, the values exceeding the limits established by the legislation were analyzed for every station assessed in the study, SI, This work was partially supported by the Junta de Castilla y Leon (Grant LE025P20) and by the AEROHEALTH and C3HEALTH projects (Ministry of Science and Innovation, Grants PID2019-106164RBI00 and TED2021-132292B-I00). The study was also cofinanced with FEDER funds
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Analysis of gaseous emission and particle number size distributions in metal casting processes with binder jetting moulds

  • Blanco Alegre, Carlos del
  • Calvo Gordaliza, Ana Isabel
  • Castro Sastre, María Ángeles
  • Fernández Abia, Ana Isabel
  • Rodríguez González, Pablo
  • Oduber Pérez, Fernanda Isabel
  • Castro Izquierdo, Amaya
  • Barreiro García, Joaquín
  • Fraile Laiz, Roberto
[EN] The impact on indoor air quality during metal casting processes using the 3D printing (3DP) binder jetting technique to manufacture moulds is analyzed in this research. This study investigates the particle size distribution and gas concentration during the manufacturing stages of 3DP moulds, with focus on particle deposition in the human respiratory system. The goal is to understand the risks associated with particle and gas emissions in binder jetting 3D printing, and thus improve worker safety. The results indicate that particle emission rates are lowest during printing (0.01 1011particles min−1) but increase during post-processing and melting-pouring phases (3.07 1011 particles min−1). During melting and pouring, the emission of particles was mainly in the range 7.9–71 nm, with values 10 times higher than in the previous phases. The study calculates the deposition of inhaled particles in different parts of the respiratory tract and reveals a 2.39 times higher extrathoracic mass deposition during 3DP mould manufacturing stages compared to melting-pouring stages. Additionally, alveolar mass deposition is higher during melting-pouring stages due to an increase in ultrafine emission rates. The study emphasizes the importance of insulation equipment and workplace ventilation in indoor spaces, particularly during heating processes that generate ultrafine particles through nucleation, so that health risks can be mitigated, SI, The sampling campaign was partially supported by the Spanish Ministry of Science, Innovation and Universities (Grant RTI2018-098189-B-I00), the University of León (Programa Propio 2015/00054/001 and 2018/00203/001) and the AEROHEALTH project (Ministry of Science and Innovation, Grant PID2019-106164RB-I00, co-financed with European FEDER funds). Authors thank the Ministry of Science, Innovation and Universities of Spain for the support through the research project with reference DPI2017-89840-R. Furthermore, this study is part of the project TED2021-132292 B–I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Measurement report: A comparative analysis of an intensive incursion of fluorescing African dust particles over Puerto Rico and another over Spain

  • Sarangi, Bighnaraj
  • Baumgardner, Darrel
  • Calvo Gordaliza, Ana Isabel
  • Bolaños Rosero, Benjamín
  • Fraile Laiz, Roberto
  • Rodríguez Fernández, Alberto
  • Fernández González, María Delia
  • Blanco Alegre, Carlos del
  • Gonçalves, Cátia Vanessa Maio, 1977-
  • Vicente, Estela Alexandra Domingos
  • Mayol Bracero, Olga L.
Published by Copernicus Publications on behalf of the European Geosciences Union, [EN] Measurements during episodes of African dust, made with two wideband integrated bioaerosol spectrometers (WIBSs), one on the northeastern coast of Puerto Rico and the other in the city of León, Spain, show unmistakable, bioaerosol-like fluorescing aerosol particles (FAPs) that can be associated with these dust episodes. The Puerto Rico event occurred during a major incursion of African dust during June 2020. The León event occurred in the late winter and spring of 2022, when widespread, elevated layers of dust inundated the Iberian Peninsula. Satellite and back-trajectory analyses confirm that dust from northern Africa was the source of the particles during both events. The WIBSs measure the size of individual particles in the range from 0.5 to 30 μm, derive a shape factor, and classify seven types of fluorescence from the FAPs. In general, it is not possible to directly determine the specific biological identity from fluorescence signatures; however, measurements of these types of bioaerosols in laboratory studies allow us to compare ambient fluorescence patterns with whole microbial cells measured under controlled conditions. Here we introduce some new metrics that offer a more quantitative approach for comparing FAP characteristics derived from particles measured under different environmental conditions. The analysis highlights the similarities and differences at the two locations and reveals differences that can be attributed to the age and history of the dust plumes, e.g., the amount of time that the air masses were in the mixed layer and the frequency of precipitation along the air mass trajector, SI, This work was partially supported by the Junta de Castilla y León, cofinanced with European FEDER funds (grant nº. LE025P20); by the aeroHEALTH project (Ministry of Science and Innovation), cofinanced with European FEDER funds (grant nº. PID2019-106164RBI00); and by a National Science Foundation MRI grant (grant nº. 1829297). Furthermore, it is part of the project TED2021-132292B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU and PRTR
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Residential combustion of coal: Effect of the fuel and combustion stage on emissions

  • Vicente, Estela Alexandra Domingos
  • Calvo Gordaliza, Ana Isabel
  • Alves, Célia dos Anjos
  • Blanco Alegre, Carlos del
  • Candeias, Carla Maria Lopes
  • Rocha, Fernando Joaquim Fernandes Tavares, 1956-
  • Sánchez de la Campa Verdona, Ana María
  • Fraile Laiz, Roberto
[EN] Worldwide coal is still used for household heating purposes not only because it is available and cheap but also due to behavioural issues. Regional variability in fuels and combustion appliances make accurate emission estimates from this source hard to achieve. In the present study, gaseous (CO, VOCs, SO2 and NOX) and particulate matter (TSP) emission factors (EFs) were determined for Spanish household coal combustion covering three commercial coals and distinct combustion stages and mimicking usage patterns in real households. TSP samples were analysed to determine water-soluble inorganic ions, metal(loid)s, and organic and elemental carbon (OC and EC). Additionally, the morphology of the emitted particles was also characterised. CO (3.43–169 g kg−1), NOX (1.29–6.00 g kg−1) and SO2 (8.96–22.3 g kg−1) EFs showed no trend regarding the combustion stage or coal type tested. On the other hand, VOC, TSP and EC EFs were higher for the ignition/devolatilisation combustion stage, regardless of the fuel tested. TSP EFs (0.085–1.08 g kg−1) increased with increasing coal volatile matter while the opposite trend was recorded for VOC emissions (0.045–3.39 gC kg−1). TSP carbonaceous matter was dominated by EC while OC represented a small fraction of the particulate mass emitted (less than 8 %wt.). Inorganic compounds composed an important fraction of the TSP samples. Sulphate particulate mass fractions (8.66–22.9 %wt.) appeared to increase with coal S-content. Coal combustion released particles with diverse morphologies, including silicate-rich particles, ferro- and glassy-spheres. This study provides novel emission factors to update emission inventories of residential coal combustion. Additionally, detailed chemical profiles were obtained for source apportionment, SI, This work was partially supported by the Junta de Castilla y Leon co-financed with European FEDER funds (Grant LE025P20) and by the AEROHEALTH project (Ministry of Science and Innovation, co-financed with European FEDER funds, grant PID2019-106164RBI00). Furthermore, it is part of the project TED2021-132292B–I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. The financial support to CESAM by FCT/MCTES (UIDP/50017/2020 + UIDB/50017/2020 + LA/P/0094/2020), through national funds, is also acknowledged
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

PM-bound organic compounds from residential coal combustion: levels and toxicological effects

  • Figueiredo, Daniela Filipa Rodrigues
  • Vicente, Estela Alexandra Domingos
  • Calvo Gordaliza, Ana Isabel
  • Evtyugina, Margarita
  • Fraile Laiz, Roberto
  • Oliveira, Helena Cristina Correia de, 1976-
  • Alves, Célia dos Anjos
[EN] Residential coal combustion is a significant source of airborne particulate matter, which has been linked to adverse health effects. This study investigates the in vitro toxicity (MTT, fluorometric intracellular ROS, flow cytometry, and FITC Annexin V) and the composition of PM10-bound organics (gas chromatography-mass spectrometry) of PM samples collected indoors and outdoors during coal combustion, as well as in the absence of the combustion source. Higher average PAH concentrations were detected indoors during coal burning, compared to outdoor and indoor concentrations without stove operation, with average levels over 8 and 10 times higher, respectively. PAHs with higher molecular weights constituted the largest amount of indoor PM10 samples, with indeno[1,2,3-cd]pyrene as the most abundant compound. Several compounds such as levoglucosan, phthalimide, oxidized Irgafos 168, phenyl compounds, dicarboxylic acids, and fatty acids exhibited lower concentrations or were absent in outdoor/background air but were prevalent during indoor coal burning. In vitro assays using A549 cells have shown that indoor samples collected during coal combustion induced cytotoxicity and oxidative stress. The cell cycle analysis revealed a significant increase in the Gap 1 (G1) phase and a decrease in the S (DNA synthesis) phase, pointing towards cell cycle arrest. The FITC Annexin V assay showed a marked increase in necrotic cell populations, suggesting persistent DNA damage or failure in DNA repair that hinders replication and transcription. Cell viability showed strong negative correlations with several PM-bound organic compounds, including dicarboxylic acids (p < 0.01), phenolic compounds such as vanillin, vanillic acid, and syringic acid (p < 0.01), and resin acids, particularly dehydroabietic acid (p < 0.01). Cell cycle arrest was significantly correlated with PAHs (p < 0.01) and phytane (p < 0.01). ROS levels were also correlated with PAHs, including phenanthrene and p-terphenyl (p < 0.01), as well as with glyceridic compounds and dicarboxylic acids (p < 0.01). These results underscore the critical need for targeted strategies to mitigate health risks associated with indoor coal combustion in European settings, SI