Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

POWAR: Power-Aware Routing in HPC Networks with On/Off Links

  • Andújar-Muñoz, Francisco José
  • Coll, Salvador|||0000-0002-7795-7252
  • Alonso Díaz, Marina|||0000-0001-7079-5898
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
  • Martínez-Rubio, Juan-Miguel|||0000-0002-9748-0332
[EN] In order to save energy in HPC interconnection networks, one usual proposal is to switch idle links into a low-power mode after a certain time without any transmission, as IEEE Energy Efficient Ethernet standard proposes. Extending the low-power mode mechanism, we propose POWer-Aware Routing (POWAR), a simple power-aware routing and selection function for fat-tree and torus networks. POWAR adapts the amount of network links that can be used, taking into account the network load, and obtaining great energy savings in the network (55%-65%) and the entire system (9%-10%) with negligible performance overhead., This work has been supported by the Spanish MINECO and European Commission (FEDER funds) under project TIN2015-66972-C5-1-R. Francisco J. Andujar has been partially funded by the Spanish MICINN and by the ERDF program of the European Union: PCAS Project (TIN2017-88614-R), CAPAP-H6 (TIN2016-81840-REDT), and Junta de Castilla y Leon FEDER Grant VA082P17 (PROPHET Project).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

An Internet of Things Platform Based on Microservices and Cloud Paradigms for Livestock

  • Mateo Fornés, Jordi
  • Pagès Bernaus, Adela
  • Pla Aragonés, Lluís Miquel
  • Castells Gasia, Joan Pau
  • Babot Gaspa, Daniel
With the growing adoption of the Internet of Things (IoT) technology in the agricultural sector, smart devices are becoming more prevalent. The availability of new, timely, and precise data offers a great opportunity to develop advanced analytical models. Therefore, the platform used to deliver new developments to the final user is a key enabler for adopting IoT technology. This work presents a generic design of a software platform based on the cloud and implemented using microservices to facilitate the use of predictive or prescriptive analytics under different IoT scenarios. Several technologies are combined to comply with the essential features¿scalability, portability, interoperability, and usability¿that the platform must consider to assist decision-making in agricultural 4.0 contexts. The platform is prepared to integrate new sensor devices, perform data operations, integrate several data sources, transfer complex statistical model developments seamlessly, and provide a user-friendly graphical interface. The proposed software architecture is implemented with open-source technologies and validated in a smart farming scenario. The growth of a batch of pigs at the fattening stage is estimated from the data provided by a level sensor installed in the silo that stores the feed from which the animals are fed. With this application, we demonstrate how farmers can monitor the weight distribution and receive alarms when high deviations happen., This research was partially supported by the Intelligent Energy Europe (IEE) program and the Ministerio de Economía y Competitividad under contract TIN2017-84553-C2-2-R, by the European Union FEDER (CAPAP-H6 network TIN2016-81840-REDT) and the demonstration activity financed by the Operation 01.02.01 of Technological Transfer from the Program of Rural Development in Catalunya 2014–2020 cofinanced by DARP and FEDER.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

EMPOWERING, a Smart Big Data Framework for Sustainable Electricity Suppliers

  • Mor Martínez, Gerard
  • Vilaplana Mayoral, Jordi
  • Danov, Stoyan
  • Cipriano, Jordi
  • Solsona Tehàs, Francesc
  • Chemisana Villegas, Daniel
This paper presents the EMPOWERING project, a Big Data environment aimed at helping domestic customers to save electricity by managing their consumption positively. This is achieved by improving the information received about energy bills and offering online tools. The main contributions of EMPOWERING are the creation of a novel workflow in the electricity utility sector regarding the implementation of data analytics for their customers and the fast implementation of data-mining techniques in massive datasets within a Big Data platform to achieve scalability. The results obtained show that EMPOWERING can be of use for customers of electrical suppliers by changing their energy habits to decrease consumption and so increase environmental sustainability., This work was supported in part by the Intelligent Energy Europe (IEE) Programme and the Ministerio de Economía y Competitividad under Contract TIN2017-84553-C2-2-R and in part by the European Union FEDER (CAPAP-H6 network) under Grant TIN2016-81840-REDT.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Optimization of Consistency-Based Multiple Sequence Alignment using Big Data technologies

  • Lladós Segura, Jordi
  • Cores Prado, Fernando
  • Guirado Fernández, Fernando
With the advent of new high-throughput next-generation sequencing technologies, the volume of genetic data processed has increased significantly. It is becoming essential for these applications to achieve large-scale alignments with thousands of sequences or even whole genomes. However, all current MSA tools have exhibited scalability issues when the number of sequences increases. The main drawback of these methods is that errors made in early pairwise alignments are propagated to the nal result, a ecting the accuracy of the global alignment. The use of consistency information enables the nal result to be improved and makes it more stable from the accuracy point of view. However, such methods are severely limited by the memory required to store the consistency information. Authors in a previous work analyzed the structure and distribution of the data stored in the constraint library and demonstrated that it could be possible to reduce it without loosing accuracy and thus it is possible to increase the number of sequences to be aligned. However, the execution time for obtaining the constraint library for a bigger number of sequences also increases greatly. In the present paper, the authors apply Big Data technologies to take advantage of the high degree of parallelism provided by the MapReduce paradigm in order to reduce considerably the library calculation time. Moreover, Big Data infrastructure provides a distributed storage system to improve the library scalability and machine-learning algorithms to enhance the consistency selection policies., This work has been supported by the MEyC-Spain under contract TIN2014-53234-C2-2-R, TIN2017-84553-C2-2-R and TIN2016-81840-REDT.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Cooperative CPU, GPU, and FPGA heterogeneous execution with EngineCL

  • Dávila Guzmán, M.A.
  • Nozal, R.
  • Gran Tejero, R.
  • Villarroya-Gaudó, M.
  • Suárez Gracia, D.
  • Bosque, J.L.
Heterogeneous systems are the core architecture of most of the high-performance computing nodes, due to their excellent performance and energy efficiency. However, a key challenge that remains is programmability, specifically, releasing the programmer from the burden of managing data and devices with different architectures. To this end, we extend EngineCL to support FPGA devices. Based on OpenCL, EngineCL is a high-level framework providing load balancing among devices. Our proposal fully integrates FPGAs into the framework, enabling effective cooperation between CPU, GPU, and FPGA. With command overlapping and judicious data management, our work improves performance by up to 96% compared with single-device execution and delivers energy-delay gains of up to 37%. In addition, adopting FPGAs does not require programmers to make big changes in their applications because the extensions do not modify the user-facing interface of EngineCL.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

EMPOWERING, a Smart Big Data Framework for Sustainable Electricity Suppliers

  • Mor Martínez, Gerard
  • Vilaplana Mayoral, Jordi
  • Danov, Stoyan
  • Cipriano, Jordi
  • Solsona Tehàs, Francesc
  • Chemisana Villegas, Daniel
This paper presents the EMPOWERING project, a Big Data environment aimed at helping domestic customers to save electricity by managing their consumption positively. This is achieved by improving the information received about energy bills and offering online tools. The main contributions of EMPOWERING are the creation of a novel workflow in the electricity utility sector regarding the implementation of data analytics for their customers and the fast implementation of data-mining techniques in massive datasets within a Big Data platform to achieve scalability. The results obtained show that EMPOWERING can be of use for customers of electrical suppliers by changing their energy habits to decrease consumption and so increase environmental sustainability., This work was supported in part by the Intelligent Energy Europe (IEE) Programme and the Ministerio de Economía y Competitividad under Contract TIN2017-84553-C2-2-R and in part by the European Union FEDER (CAPAP-H6 network) under Grant TIN2016-81840-REDT.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An Internet of Things Platform Based on Microservices and Cloud Paradigms for Livestock

  • Mateo Fornés, Jordi
  • Pagès Bernaus, Adela
  • Pla Aragonés, Lluís Miquel
  • Castells Gasia, Joan Pau
  • Babot Gaspa, Daniel
With the growing adoption of the Internet of Things (IoT) technology in the agricultural sector, smart devices are becoming more prevalent. The availability of new, timely, and precise data offers a great opportunity to develop advanced analytical models. Therefore, the platform used to deliver new developments to the final user is a key enabler for adopting IoT technology. This work presents a generic design of a software platform based on the cloud and implemented using microservices to facilitate the use of predictive or prescriptive analytics under different IoT scenarios. Several technologies are combined to comply with the essential features¿scalability, portability, interoperability, and usability¿that the platform must consider to assist decision-making in agricultural 4.0 contexts. The platform is prepared to integrate new sensor devices, perform data operations, integrate several data sources, transfer complex statistical model developments seamlessly, and provide a user-friendly graphical interface. The proposed software architecture is implemented with open-source technologies and validated in a smart farming scenario. The growth of a batch of pigs at the fattening stage is estimated from the data provided by a level sensor installed in the silo that stores the feed from which the animals are fed. With this application, we demonstrate how farmers can monitor the weight distribution and receive alarms when high deviations happen., This research was partially supported by the Intelligent Energy Europe (IEE) program and the Ministerio de Economía y Competitividad under contract TIN2017-84553-C2-2-R, by the European Union FEDER (CAPAP-H6 network TIN2016-81840-REDT) and the demonstration activity financed by the Operation 01.02.01 of Technological Transfer from the Program of Rural Development in Catalunya 2014–2020 cofinanced by DARP and FEDER.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimization of Consistency-Based Multiple Sequence Alignment using Big Data technologies

  • Lladós Segura, Jordi
  • Cores Prado, Fernando
  • Guirado Fernández, Fernando
With the advent of new high-throughput next-generation sequencing technologies, the volume of genetic data processed has increased significantly. It is becoming essential for these applications to achieve large-scale alignments with thousands of sequences or even whole genomes. However, all current MSA tools have exhibited scalability issues when the number of sequences increases. The main drawback of these methods is that errors made in early pairwise alignments are propagated to the nal result, a ecting the accuracy of the global alignment. The use of consistency information enables the nal result to be improved and makes it more stable from the accuracy point of view. However, such methods are severely limited by the memory required to store the consistency information. Authors in a previous work analyzed the structure and distribution of the data stored in the constraint library and demonstrated that it could be possible to reduce it without loosing accuracy and thus it is possible to increase the number of sequences to be aligned. However, the execution time for obtaining the constraint library for a bigger number of sequences also increases greatly. In the present paper, the authors apply Big Data technologies to take advantage of the high degree of parallelism provided by the MapReduce paradigm in order to reduce considerably the library calculation time. Moreover, Big Data infrastructure provides a distributed storage system to improve the library scalability and machine-learning algorithms to enhance the consistency selection policies., This work has been supported by the MEyC-Spain under contract TIN2014-53234-C2-2-R, TIN2017-84553-C2-2-R and TIN2016-81840-REDT.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Scalability of a multi-physics system for forest fire spread prediction in multi-core platforms

  • Farguell, Àngel|||0000-0003-2395-220X
  • Cortés Fité, Ana|||0000-0003-1697-1293
  • Margalef, Tomàs|||0000-0001-6384-7389
  • Miró, Josep Ramon|||0000-0003-2838-6083
  • Mercader, J.
Advances in high-performance computing have led to an improvement in modeling multi-physics systems because of the capacity to solve complex numerical systems in a reasonable time. WRF-SFIRE is a multi-physics system that couples the atmospheric model WRF and the forest fire spread model called SFIRE with the objective of considering the atmosphere-fire interactions. In systems like WRF-SFIRE, the trade-off between result accuracy and time required to deliver that result is crucial. So, in this work, we analyze the influence of WRF-SFIRE settings (grid resolutions) into the forecasts accuracy and into the execution times on multi-core platforms using OpenMP and MPI parallel programming paradigms.